dt-bindings: Remove "status" from examples

Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

6 files changed, 0 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
index 462819ac3da8..e6f168db6c72 100644
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -12,7 +12,6 @@ Example:
 	pmic@5b {
 		compatible = "active-semi,act8945a";
 		reg = <0x5b>;
-		status = "okay";
 
 		active-semi,vsel-high;
 
@@ -79,6 +78,5 @@ Example:
 			active-semi,input-voltage-threshold-microvolt = <6600>;
 			active-semi,precondition-timeout = <40>;
 			active-semi,total-timeout = <3>;
-			status = "okay";
 		};
 	};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
index eec40be7f79a..3f643ef121ff 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -25,7 +25,6 @@ Example:
 		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
 		clock-names = "periph_clk","sys_clk", "slow_clk";
 		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		status = "disabled";
 
 		hlcdc-display-controller {
 			compatible = "atmel,hlcdc-display-controller";
diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
index 9554292dc6cb..d0d7fe4ddd1a 100644
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -29,7 +29,6 @@ Sub-nodes:
 Examples:
 
 i2c@63fc8000 { /* I2C1 */
-	status = "okay";
 
 	pmic: dialog@48 {
 		compatible = "dlg,da9053-aa";
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 8aba48821a85..39ba4146769d 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -116,7 +116,6 @@ ecspi@70010000 { /* ECSPI1 */
 	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
 		   <&gpio4 25 0>; /* GPIO4_25 */
-	status = "okay";
 
 	pmic: mc13892@0 {
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
index 555fb117d4fa..755cbef0647d 100644
--- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
+++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
@@ -26,7 +26,6 @@ Example for i.MX23 SoC:
 		compatible = "fsl,imx23-lradc";
 		reg = <0x80050000 0x2000>;
 		interrupts = <36 37 38 39 40 41 42 43 44>;
-		status = "okay";
 		fsl,lradc-touchscreen-wires = <4>;
 		fsl,ave-ctrl = <4>;
 		fsl,ave-delay = <2>;
@@ -39,7 +38,6 @@ Example for i.MX28 SoC:
 		compatible = "fsl,imx28-lradc";
 		reg = <0x80050000 0x2000>;
 		interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
-		status = "okay";
 		fsl,lradc-touchscreen-wires = <5>;
 		fsl,ave-ctrl = <4>;
 		fsl,ave-delay = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
index df664018c148..d759da606f75 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
@@ -57,7 +57,6 @@ audio-subsystem {
 		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
-		status = "disabled";
 	};
 
 	serial_3: serial@11460000 {
@@ -69,6 +68,5 @@ audio-subsystem {
 		clock-names = "uart", "clk_uart_baud0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart_aud_bus>;
-		status = "disabled";
 	};
  };