path: root/src/usr/ibscom/ibscom.C

/* IBM_PROLOG_BEGIN_TAG                                                   */
/* This is an automatically generated prolog.                             */
/*                                                                        */
/* $Source: src/usr/ibscom/ibscom.C $                                     */
/*                                                                        */
/* OpenPOWER HostBoot Project                                             */
/*                                                                        */
/* Contributors Listed Below - COPYRIGHT 2012,2017                        */
/* [+] International Business Machines Corp.                              */
/*                                                                        */
/*                                                                        */
/* Licensed under the Apache License, Version 2.0 (the "License");        */
/* you may not use this file except in compliance with the License.       */
/* You may obtain a copy of the License at                                */
/*                                                                        */
/*     http://www.apache.org/licenses/LICENSE-2.0                         */
/*                                                                        */
/* Unless required by applicable law or agreed to in writing, software    */
/* distributed under the License is distributed on an "AS IS" BASIS,      */
/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        */
/* implied. See the License for the specific language governing           */
/* permissions and limitations under the License.                         */
/*                                                                        */
/* IBM_PROLOG_END_TAG                                                     */

/*****************************************************************************/
// I n c l u d e s
/*****************************************************************************/
#include <sys/mmio.h>
#include <sys/task.h>
#include <sys/sync.h>
#include <sys/misc.h>
#include <arch/ppc.H>
#include <string.h>
#include <devicefw/driverif.H>
#include <trace/interface.H>
#include <errl/errlentry.H>
#include <errl/errlmanager.H>
#include <errl/errludlogregister.H>
#include <targeting/common/targetservice.H>
#include <ibscom/ibscomreasoncodes.H>
#include "ibscom.H"
#include <assert.h>
#include <limits.h>
#include <errl/errludtarget.H>
#include <xscom/piberror.H>
#include <diag/attn/attn.H>
#include <ibscom/ibscomif.H>
#include    <targeting/common/utilFilter.H>

// Easy macro replace for unit testing
//#define TRACUCOMP(args...)  TRACFCOMP(args)
#define TRACUCOMP(args...)

// Trace definition
trace_desc_t* g_trac_ibscom = NULL;
TRAC_INIT(&g_trac_ibscom, IBSCOM_COMP_NAME, KILOBYTE);

using namespace ERRORLOG;
using namespace TARGETING;

namespace IBSCOM
{
// SCOM Register addresses
const uint32_t MBS_FIR = 0x02011400;
const uint32_t MBSIBERR0 = 0x0201141B;

// Register XSCcom access functions to DD framework
DEVICE_REGISTER_ROUTE(DeviceFW::WILDCARD,
                      DeviceFW::IBSCOM,
                      TYPE_MEMBUF,
                      ibscomPerformOp);

/**
 * @brief Internal routine that verifies the validity of input parameters
 * for an inband scom access.
 *
 * @param[in]   i_opType       Operation type, see DeviceFW::OperationType
 *                             in driverif.H
 * @param[in]   i_target       inband scom target
 * @param[in] i_buffer         Read: Pointer to output data storage
 *                             Write: Pointer to input data storage
 * @param[in] i_buflen         Input: size of io_buffer (in bytes)
 * @param[in] i_addr           Address being accessed (Used for FFDC)
 * @return  errlHndl_t
 */
errlHndl_t ibscomOpSanityCheck(const DeviceFW::OperationType i_opType,
                              const Target* i_target,
                              const void* i_buffer,
                              const size_t& i_buflen,
                              const uint64_t i_addr)
{
    errlHndl_t l_err = NULL;
    TRACDCOMP(g_trac_ibscom, INFO_MRK
              ">>ibscomOpSanityCheck: Entering Function");

    do
    {
        // Verify address is somewhat valid (not over 32-bits long)
        if(0 != (i_addr & 0xFFFFFFFF00000000))
        {
            TRACFCOMP(g_trac_ibscom, ERR_MRK"ibscomOpSanityCheck: Impossible address.  i_addr=0x%.16X",
                      i_buflen);
            /*@
             * @errortype
             * @moduleid     IBSCOM_SANITY_CHECK
             * @reasoncode   IBSCOM_INVALID_ADDRESS
             * @userdata1    Inband Scom  address
             * @userdata2    <none>
             * @devdesc      The provided address is over 32 bits long
             *               which makes it invalid.
             */
            l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                  IBSCOM_SANITY_CHECK,
                                  IBSCOM_INVALID_ADDRESS,
                                  i_addr,
                                  0);
            l_err->addProcedureCallout(HWAS::EPUB_PRC_HB_CODE,
                                       HWAS::SRCI_PRIORITY_HIGH);
            break;
        }

        // Verify data buffer
        if ( (i_buflen < IBSCOM_BUFFER_SIZE) ||
             (i_buffer == NULL) )
        {
            TRACFCOMP(g_trac_ibscom, ERR_MRK
                      "ibscomOpSanityCheck: Invalid buffer.  i_buflen=0x%X",
                      i_buflen);
            /*@
             * @errortype
             * @moduleid     IBSCOM_SANITY_CHECK
             * @reasoncode   IBSCOM_INVALID_DATA_BUFFER
             * @userdata1    Buffer size
             * @userdata2    Inband Scom  address
             * @devdesc      Inband  buffer size < 8 bytes or NULL
             *               data buffer
             */
            l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                  IBSCOM_SANITY_CHECK,
                                  IBSCOM_INVALID_DATA_BUFFER,
                                  i_buflen,
                                  i_addr);
            l_err->addProcedureCallout(HWAS::EPUB_PRC_HB_CODE,
                                       HWAS::SRCI_PRIORITY_HIGH);
            break;
        }

        // Verify OP type
        if ( (i_opType != DeviceFW::READ) &&
             (i_opType != DeviceFW::WRITE) )
        {
            TRACFCOMP(g_trac_ibscom, ERR_MRK
                      "ibscomOpSanityCheck: Invalid opType.  i_opType=0x%X",
                      i_opType);
            /*@
             * @errortype
             * @moduleid     IBSCOM_SANITY_CHECK
             * @reasoncode   IBSCOM_INVALID_OP_TYPE
             * @userdata1    Operation type
             * @userdata2    inband scom address
             * @devdesc      inband scom invalid operation type
             */
            l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                  IBSCOM_SANITY_CHECK,
                                  IBSCOM_INVALID_OP_TYPE,
                                  i_opType,
                                  i_addr);
            l_err->addProcedureCallout(HWAS::EPUB_PRC_HB_CODE,
                                       HWAS::SRCI_PRIORITY_HIGH);
            break;
        }


    } while(0);

    return l_err;
}

/**
 * @brief Get the virtual address of the input target
 *        for an inband scom access.
 *
 * Logic:
 * If never inband scom to this chip:
 *     Call mmio_dev_map() to get virtual addr for this slave proc
 *     Save virtual addr used to this chip's attribute
 * Else
 *     Use virtual address stored in this chip's attributes.
 * End if
 *
 * @param[in]   i_target        inband scom target
 * @param[out]  o_virtAddr      Target's virtual address
 *
 * @return errlHndl_t
 */
errlHndl_t getTargetVirtualAddress(Target* i_target,
                                   uint64_t*& o_virtAddr)
{
    errlHndl_t l_err = NULL;
    o_virtAddr = NULL;
    IBScomBase_t l_IBScomBaseAddr = 0;
    mutex_t* l_mutex = NULL;
    bool need_unlock = false;

    do
    {
        // Get the virtual addr value of the chip from attribute
        o_virtAddr =  reinterpret_cast<uint64_t*>
          (i_target->getAttr<ATTR_IBSCOM_VIRTUAL_ADDR>());

        // If the virtual address equals NULL(default) then this is the
        // first IBSCOM to this target so we need to allocate
        // the virtual address and save it in the xscom address attribute.
        if (o_virtAddr == NULL)
        {
            //lock around setting the attribute
            l_mutex = i_target->getHbMutexAttr<TARGETING::ATTR_IBSCOM_MUTEX>();
            mutex_lock(l_mutex);
            need_unlock = true;

            //double-check that another thread didn't slip in before we locked
            o_virtAddr =  reinterpret_cast<uint64_t*>
              (i_target->getAttr<ATTR_IBSCOM_VIRTUAL_ADDR>());
            if( o_virtAddr != 0 )
            {
                mutex_unlock(l_mutex);
                need_unlock = false;
                break;
            }

            TRACDCOMP(g_trac_ibscom, INFO_MRK
                      "getTargetVirtualAddress: Need to compute virtual address for Centaur");

            //Get MMIO Offset from parent MCS attribute.

            //Get the parent MCS
            Target* parentMCS = NULL;

            PredicateCTM l_mcs(CLASS_UNIT,
                               TYPE_MCS,
                               MODEL_NA);

            TargetHandleList mcs_list;
            targetService().
              getAssociated(mcs_list,
                            i_target,
                            TargetService::PARENT_BY_AFFINITY,
                            TargetService::ALL,
                            &l_mcs);

            if( mcs_list.size() != 1 )
            {
                TRACFCOMP(g_trac_ibscom, ERR_MRK
                          "getTargetVirtualAddress:  mcs_list size is zero");
                /*@
                 * @errortype
                 * @moduleid     IBSCOM_GET_TARG_VIRT_ADDR
                 * @reasoncode   IBSCOM_INVALID_CONFIG
                 * @userdata1[0:31]   HUID of Centaur Target
                 * @userdata2    Not Used
                 * @devdesc      System configuration does not have a Parent MCS
                 *               for the current centaur.
                 */
                l_err =
                  new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                IBSCOM_GET_TARG_VIRT_ADDR,
                                IBSCOM_INVALID_CONFIG,
                                TWO_UINT32_TO_UINT64(
                                                     get_huid(i_target),
                                                     0),
                                0);
                l_err->addProcedureCallout(HWAS::EPUB_PRC_HB_CODE,
                                           HWAS::SRCI_PRIORITY_HIGH);
                break;
            }
            parentMCS = *(mcs_list.begin());

            l_IBScomBaseAddr =
              parentMCS->getAttr<ATTR_IBSCOM_MCS_BASE_ADDR>();

            TRACUCOMP(g_trac_ibscom, INFO_MRK
                      "getTargetVirtualAddress: From Attribute query l_IBScomBaseAddr=0x%llX, i_target=0x%.8x",
                      l_IBScomBaseAddr,
                      i_target->getAttr<ATTR_HUID>());

            // Map target's virtual address
            //NOTE: mmio_dev_map only supports 32 GB Allocation.  Technically,
            //hostboot IBSCOM MMIO allocated 64GB, but the SCOM address space
            //is small enough that 32 GB is sufficient.
            o_virtAddr = static_cast<uint64_t*>
              (mmio_dev_map(reinterpret_cast<void*>(l_IBScomBaseAddr),
                            THIRTYTWO_GB));

            // Save the virtual address attribute.
            i_target->setAttr<ATTR_IBSCOM_VIRTUAL_ADDR>
              (reinterpret_cast<uint64_t>(o_virtAddr));

            mutex_unlock(l_mutex);
            need_unlock = false;
        }

    } while (0);

    if( need_unlock && l_mutex )
    {
        mutex_unlock(l_mutex);
    }

    TRACDCOMP(g_trac_ibscom, EXIT_MRK
              "getTargetVirtualAddress: o_Virtual Base Address   =  0x%llX",
              o_virtAddr);


    return l_err;
}

///////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
void err_cleanup(Target* i_target,
                 uint64_t i_addr)
{
    //Going to commit at most 1 informational error here
    errlHndl_t l_err = NULL;
    errlHndl_t tmp_err = NULL;
    ERRORLOG::ErrlUserDetailsLogRegister l_logReg(i_target);

    uint64_t zeroData = 0x0;
    size_t op_size = sizeof(uint64_t);

    // Clear our the status reg
    op_size = sizeof(uint64_t);
    tmp_err = deviceOp( DeviceFW::WRITE,
                      i_target,
                      &zeroData,
                      op_size,
                      DEVICE_FSISCOM_ADDRESS(MBSIBERR0) );
    if(tmp_err)
    {
        if( l_err )
        {
            delete tmp_err;
        }
        else
        {
            l_err = tmp_err;
        }

        //Really just want to save the address, so stick in some
        //obvious dummy data
        uint64_t dummyData = 0x00000000DEADBEEF;
        l_logReg.addDataBuffer(&dummyData, sizeof(dummyData),
                               DEVICE_IBSCOM_ADDRESS(MBSIBERR0));
    }

    // Clear out the FIR bits we might trigger
    uint64_t mbs_fir = 0;
    op_size = sizeof(uint64_t);
    tmp_err = deviceOp( DeviceFW::READ,
                      i_target,
                      &mbs_fir,
                      op_size,
                      DEVICE_FSISCOM_ADDRESS(MBS_FIR) );
    if(tmp_err)
    {
        if( l_err )
        {
            delete tmp_err;
        }
        else
        {
            l_err = tmp_err;
        }

        //Really just want to save the address, so stick in some
        //obvious dummy data
        uint64_t dummyData = 0x10000000DEADBEEF;
        l_logReg.addDataBuffer(&dummyData, sizeof(dummyData),
                               DEVICE_IBSCOM_ADDRESS(MBS_FIR));
    }

    //22=MBS_FIR_MASK_REG_HOST_INBAND_READ_ERROR
    //23=MBS_FIR_MASK_REG_HOST_INBAND_WRITE_ERROR
    mbs_fir &= 0xFFFFFCFFFFFFFFFF;
    op_size = sizeof(uint64_t);
    tmp_err = deviceOp( DeviceFW::WRITE,
                      i_target,
                      &mbs_fir,
                      op_size,
                      DEVICE_FSISCOM_ADDRESS(MBS_FIR) );
    if(tmp_err)
    {
        if( l_err )
        {
            delete tmp_err;
        }
        else
        {
            l_err = tmp_err;
        }

        //Really just want to save the address, so stick in some
        //obvious dummy data
        uint64_t dummyData = 0x20000000DEADBEEF;
        l_logReg.addDataBuffer(&dummyData, sizeof(dummyData),
                               DEVICE_IBSCOM_ADDRESS(MBS_FIR));
    }

    if( l_err )
    {
        l_logReg.addToLog(l_err);

        //force to informational so we don't log extra errors
        //inside of possible error collection paths
        l_err->setSev(ERRORLOG::ERRL_SEV_INFORMATIONAL);
        errlCommit(l_err,IBSCOM_COMP_ID);
        l_err = NULL;
    }
}


///////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
errlHndl_t doIBScom(DeviceFW::OperationType i_opType,
                          Target* i_target,
                          void* io_buffer,
                          size_t& io_buflen,
                          uint64_t i_addr,
                          bool i_errDataPath)
{
    errlHndl_t l_err = NULL;
    mutex_t* l_mutex = NULL;
    bool need_unlock = false;

    do
    {
        TRACUCOMP(g_trac_ibscom, INFO_MRK
                  ">>doIBScom: Perform op to SCOM Address 0x%X",
                  i_addr);

        // inband scom operation sanity check
        l_err = ibscomOpSanityCheck(i_opType, i_target, io_buffer,
                                    io_buflen, i_addr);
        if (l_err)
        {
            break;
        }
        // Set to buffer len to 0 until successfully access
        io_buflen = 0;

        // Get the target chip's virtual address
        uint64_t* l_virtAddr = NULL;
        l_err = getTargetVirtualAddress(i_target, l_virtAddr);

        if (l_err)
        {
            break;
        }

        TRACDCOMP(g_trac_ibscom,
                  "doIBScom: Base Virt Addr: 0x%.16X, Read addr: 0x%.16X",
                  l_virtAddr, &(l_virtAddr[i_addr]));


        // The dereferencing should handle Cache inhibited internally
        // Use local variable and memcpy to avoid unaligned memory access
        uint64_t l_data = 0;
        bool rw_error = false;

        //Device already locked when re-entering function for error collection..
        if(!i_errDataPath)
        {
            l_mutex = i_target->getHbMutexAttr<TARGETING::ATTR_IBSCOM_MUTEX>();
            mutex_lock(l_mutex);
            need_unlock = true;

            //Need to check if ibscom is still enabled before moving on in
            //case we flipped the switch due to an error
            ScomSwitches l_switches = i_target->getAttr<ATTR_SCOM_SWITCHES>();
            if( !l_switches.useInbandScom )
            {
                TRACFCOMP(g_trac_ibscom, ERR_MRK"doIBScom> IBSCOM longer enabled on %.8X, error must have occurred", get_huid(i_target));
                /*@
                 * @errortype
                 * @moduleid     IBSCOM_DO_IBSCOM
                 * @reasoncode   IBSCOM_RETRY_DUE_TO_ERROR
                 * @userdata1[0:31]   HUID of Centaur Target
                 * @userdata1[32:64]  SCOM Address
                 * @userdata2    Not Used
                 * @devdesc      Previous error disabled ibscom, so forcing
                 *               a retry via FSI
                 */
                l_err =
                  new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                IBSCOM_DO_IBSCOM,
                                IBSCOM_RETRY_DUE_TO_ERROR,
                                get_huid(i_target),
                                i_addr);
                //This error should NEVER get returned to caller, so it's a
                //FW bug if it actually gets committed.
                l_err->addProcedureCallout(HWAS::EPUB_PRC_HB_CODE,
                                           HWAS::SRCI_PRIORITY_HIGH);
                break;
            }
        }

        if (i_opType == DeviceFW::READ)
        {
            //This is the actual MMIO Read
            l_data = l_virtAddr[i_addr];
            eieio();

            TRACUCOMP(g_trac_ibscom,
                      "doIBScom: Read address: 0x%.8X data: %.16X",
                      i_addr, l_data);

            // Check for error or done
            if(l_data == MMIO_IBSCOM_UE_DETECTED)
            {
                if(i_errDataPath)
                {
                    TRACFCOMP(g_trac_ibscom, ERR_MRK"doIBScom:  SUE Occurred during IBSCOM Error path");
                    /*@
                     * @errortype
                     * @moduleid     IBSCOM_DO_IBSCOM
                     * @reasoncode   IBSCOM_SUE_IN_ERR_PATH
                     * @userdata1[0:31]   HUID of Centaur Target
                     * @userdata1[32:64]  SCOM Address
                     * @userdata2    Not Used
                     * @devdesc      SUE Encountered when collecting IBSCOM
                     *               Error Data
                     */
                    l_err =
                      new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                    IBSCOM_DO_IBSCOM,
                                    IBSCOM_SUE_IN_ERR_PATH,
                                    TWO_UINT32_TO_UINT64(
                                                         get_huid(i_target),
                                                         i_addr),
                                    0);
                    //This error should NEVER get returned to caller, so it's a
                    //FW bug if it actually gets committed.
                    l_err->addProcedureCallout(HWAS::EPUB_PRC_HB_CODE,
                                               HWAS::SRCI_PRIORITY_HIGH);
                    ERRORLOG::ErrlUserDetailsTarget(i_target,"IBSCOM Target")
                      .addToLog(l_err);
                    break;
                }
                else
                {
                    TRACFCOMP(g_trac_ibscom,
                              "doIBScom: Error code found in read data");
                    rw_error = true;
                }
            }
            else
            {
                //Copy data to user buffer
                memcpy(io_buffer, &l_data, sizeof(l_data));
            }
        }
        else //i_opType == DeviceFW::WRITE
        {
            memcpy(&l_data, io_buffer, sizeof(l_data));
            TRACUCOMP(g_trac_ibscom,
                      "doIBScom: Write addr: 0x%.8X data: %.16X",
                      i_addr, l_data);
            //This is the actual MMIO Write
            l_virtAddr[i_addr] = l_data;
            eieio();

            //Workaround for HW264203
            //A read of MBSIBWRSTAT will not trigger a SUE so we need to
            //read the MBS_FIR instead.
            TRACDCOMP(g_trac_ibscom,
                      "doIBScom: Read MBS_FIR to check for error");
            uint64_t fir_data = 0;
            size_t readSize = sizeof(uint64_t);
            l_err = doIBScom(DeviceFW::READ,
                             i_target,
                             &fir_data,
                             readSize,
                             MBS_FIR,
                             true);
            if(l_err != NULL)
            {
                if( IBSCOM_SUE_IN_ERR_PATH == l_err->reasonCode() )
                {
                    TRACFCOMP(g_trac_ibscom, ERR_MRK
                              "doIBScom: SUE on write detected");
                    delete l_err;
                    l_err = NULL;
                    rw_error = true;
                }
                else
                {
                    TRACFCOMP(g_trac_ibscom, ERR_MRK"doIBScom: Unexpected error when checking for SUE");
                    break;
                }
            }
            else
            {
                TRACUCOMP(g_trac_ibscom, "doIBScom: MBS_FIR=%.16X",fir_data);

                //check the FIR bits specifically
                //23 = MBS_FIR_MASK_REG_HOST_INBAND_WRITE_ERROR: A PIB error
                //     or inband buffer error was detected on a host inband
                //     write operation.
                if( fir_data & 0x0000010000000000 )
                {
                    TRACFCOMP(g_trac_ibscom, ERR_MRK" doIBScom: MBS_FIR[23] detected after write : %.16X", fir_data);
                    rw_error = true;
                }
            }
        }

        // Common error checking for both read and write
        if(rw_error)
        {
            bool busDown = false;
            TRACUCOMP(g_trac_ibscom,
                      "doIBScom: Get Error data, read MBSIBERR0");
            size_t op_size = sizeof(uint64_t);

            // Note: Using FSISCOM path to read the errors even though
            // we could use IBSCOM in DD2 because it makes code simpler

            MBSIBERRO_Reg_t mbsiberr0;
            op_size = sizeof(uint64_t);
            l_err = deviceOp( DeviceFW::READ,
                              i_target,
                              &(mbsiberr0.data),
                              op_size,
                              DEVICE_FSISCOM_ADDRESS(MBSIBERR0) );
            if(l_err)
            {
                TRACFCOMP(g_trac_ibscom, ERR_MRK
                          "doIBScom: Error reading MBSIBERR0 over FSI");
                //Save away the IBSCOM address
                ERRORLOG::ErrlUserDetailsLogRegister l_logReg(i_target);
                //Really just want to save the address, so stick in some
                //obvious dummy data
                uint64_t dummyData = 0x30000000DEADBEEF;
                l_logReg.addDataBuffer(&dummyData, sizeof(dummyData),
                                       DEVICE_IBSCOM_ADDRESS(i_addr));
                l_logReg.addToLog(l_err);

                //force to informational so we don't log extra errors
                //inside of possible error collection paths
                l_err->setSev(ERRORLOG::ERRL_SEV_INFORMATIONAL);
                errlCommit(l_err,IBSCOM_COMP_ID);
                l_err = NULL;

                //fabricate some error data
                mbsiberr0.addr = i_addr;
                mbsiberr0.errvalid = 1;
                mbsiberr0.piberr = 0;
                mbsiberr0.iswrite = (i_opType == DeviceFW::READ) ? 0 : 1;
                mbsiberr0.reserved = 0xBADBAD;
            }

            TRACUCOMP(g_trac_ibscom,
                      "doIBScom: MBSIBERR0(0x%.16x) = 0x%.16X",
                      MBSIBERR0, mbsiberr0.data);

            //if the MBSIBERR0Q_IB_HOST_ERROR_VALID bit is not set
            //  then we have a bus failure
            if( !(mbsiberr0.errvalid) )
            {
                //Bus is down
                busDown = true;
            }
            //confirm that we are looking at error data for the scom we did
            //0:31 = MBSIBERR0Q_IB_HOST_ADDRESS: This is the 32 bit scom
            //  address that was being accessed when the error was detected.
            else if( mbsiberr0.addr != i_addr )
            {
                TRACFCOMP( g_trac_ibscom, "doIBScom> The address in MBSIBERR0 (0x%.8X) doesn't match what we were scomming (0x%.8X)", mbsiberr0.addr, i_addr );
                /*@
                 * @errortype
                 * @moduleid     IBSCOM_DO_IBSCOM
                 * @reasoncode   IBSCOM_WRONG_ERROR
                 * @userdata1[0:31]   HUID of Centaur Target
                 * @userdata1[32:64]  SCOM Address
                 * @userdata2    Contents of MBSIBERR0 register
                 * @devdesc      Detected error doesn't match the address
                 *               we failed on
                 */
                l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                      IBSCOM_DO_IBSCOM,
                                      IBSCOM_WRONG_ERROR,
                                      TWO_UINT32_TO_UINT64(
                                                     get_huid(i_target),
                                                     i_addr),
                                      mbsiberr0.data);
                // this would be a code bug because we got out of sync somehow
                l_err->addProcedureCallout( HWAS::EPUB_PRC_HB_CODE,
                                            HWAS::SRCI_PRIORITY_HIGH );
                ERRORLOG::ErrlUserDetailsTarget(i_target,"IBSCOM Target")
                  .addToLog(l_err);
                ERRORLOG::ErrlUserDetailsLogRegister ffdc(i_target);
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(MBS_FIR));
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(MBSIBERR0));
                ffdc.addToLog(l_err);
                l_err->collectTrace(IBSCOM_COMP_NAME);

                //attempt to clear the error register so future accesses
                //will work
                err_cleanup(i_target,i_addr);

                break;
            }


            if(busDown)
            {
                /*@
                 * @errortype
                 * @moduleid     IBSCOM_DO_IBSCOM
                 * @reasoncode   IBSCOM_BUS_FAILURE
                 * @userdata1[0:31]   HUID of Centaur Target
                 * @userdata1[32:64]  SCOM Address
                 * @userdata2    Contents of MBSIBERR0 register
                 * @devdesc      Bus failure when attempting to perform
                 *               IBSCOM operation.  IBSCOM disabled.
                 */
                errlHndl_t ib_err =
                  new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                IBSCOM_DO_IBSCOM,
                                IBSCOM_BUS_FAILURE,
                                TWO_UINT32_TO_UINT64(
                                                     get_huid(i_target),
                                                     i_addr),
                                mbsiberr0.data);

                //force a deconfig to potentially allow the IPL
                // to continue after a channel fail
                ib_err->addHwCallout(i_target,
                                     HWAS::SRCI_PRIORITY_HIGH,
                                     HWAS::DELAYED_DECONFIG,
                                     HWAS::GARD_NULL);

                //grab some HW regs via FSISCOM
                ERRORLOG::ErrlUserDetailsLogRegister ffdc(i_target);
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(MBS_FIR));
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(MBSIBERR0));
                ffdc.addToLog(l_err);

                //disable IBSCOM
                ScomSwitches l_switches =
                  i_target->getAttr<ATTR_SCOM_SWITCHES>();

                // If IBSCOM is not already disabled.
                if ((l_switches.useFsiScom != 1) ||
                    (l_switches.useInbandScom != 0))
                {
                    l_switches.useFsiScom = 1;
                    l_switches.useInbandScom = 0;

                    // Turn off IBSCOM and turn on FSI SCOM.
                    i_target->setAttr<ATTR_SCOM_SWITCHES>(l_switches);
                }

                //@todo: RTC:92971
                //There is a potential deadlock if we call PRD here
                //Look for a better PRD error
                //errlHndl_t prd_err = ATTN::checkForIplAttentions();
                errlHndl_t prd_err = NULL;
                if( prd_err )
                {
                    TRACFCOMP( g_trac_ibscom, ERR_MRK"Error from checkForIplAttentions : PLID=%X", prd_err->plid() );
                    //connect up the plids
                    ib_err->plid(prd_err->plid());
                    //commit my log as info because PRD's log is better
                    ib_err->setSev(ERRORLOG::ERRL_SEV_INFORMATIONAL);
                    errlCommit(ib_err,IBSCOM_COMP_ID);
                    l_err = prd_err;
                }
                else
                {
                    //my log is the only one
                    l_err = ib_err;
                }

                l_err->collectTrace(IBSCOM_COMP_NAME);

                //Note-not cleaning up the error status here since
                // we will not be using IBSCOM again

                break;
            }
            else // bus isn't down, some other kind of error
            {
                /*@
                 * @errortype
                 * @moduleid     IBSCOM_DO_IBSCOM
                 * @reasoncode   IBSCOM_PIB_FAILURE
                 * @userdata1[0:31]   HUID of Centaur Target
                 * @userdata1[32:64]  SCOM Address
                 * @userdata2    Contents of MBSIBERR0 register
                 * @devdesc      PIB error when attempting to perform
                 *               IBSCOM operation.
                 */
                l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                      IBSCOM_DO_IBSCOM,
                                      IBSCOM_PIB_FAILURE,
                                      TWO_UINT32_TO_UINT64(
                                          get_huid(i_target),
                                          i_addr),
                                      mbsiberr0.data);

                //Add this target to the FFDC
                ERRORLOG::ErrlUserDetailsTarget(i_target,"IBSCOM Target")
                  .addToLog(l_err);

                //add callouts based on the PIB error
                PIB::addFruCallouts( i_target,
                                     mbsiberr0.piberr,
                                     i_addr,
                                     l_err );

                //force a deconfig to potentially allow the IPL
                // to continue after a channel fail
                l_err->addHwCallout(i_target,
                                    HWAS::SRCI_PRIORITY_LOW,
                                    HWAS::DELAYED_DECONFIG,
                                    HWAS::GARD_NULL);


                //grab some HW regs via FSISCOM
                ERRORLOG::ErrlUserDetailsLogRegister ffdc(i_target);
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(0x000F0011));
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(0x000F001E));
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(0x000F001F));
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(0x0104000A));
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(MBS_FIR));
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(MBSIBERR0));

                //grabbing the error specifics for a scom fail
                ffdc.addData(DEVICE_FSISCOM_ADDRESS(0x03010001));

                ffdc.addToLog(l_err);

                l_err->collectTrace(IBSCOM_COMP_NAME);

                //attempt to clear the error register so future accesses
                //will work
                err_cleanup(i_target,i_addr);

                break;
            }
        }
        else
        {
            //Operation was a success, set buffer length
            io_buflen = sizeof(uint64_t);
        }

        TRACDCOMP(g_trac_ibscom,"doIBScom: OpType 0x%.16llX, SCOM Address 0x%llX, Virtual Address 0x%llX",
                  static_cast<uint64_t>(i_opType),
                  i_addr,
                  &(l_virtAddr[i_addr]));

    } while (0);

    if( need_unlock && l_mutex )
    {
        mutex_unlock(l_mutex);
    }

    return l_err;
}

///////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
errlHndl_t ibscomPerformOp(DeviceFW::OperationType i_opType,
                          Target* i_target,
                          void* io_buffer,
                          size_t& io_buflen,
                          int64_t i_accessType,
                          va_list i_args)
{
    errlHndl_t l_err = NULL;
    uint64_t l_addr = va_arg(i_args,uint64_t);

    l_err = doIBScom(i_opType,
                     i_target,
                     io_buffer,
                     io_buflen,
                     l_addr,
                     false);
    return l_err;
}


/**
 * @brief Enable or disable Inband SCOMs on all capable chips
 */
void enableInbandScoms( bool i_disable )
{
    TARGETING::TargetHandleList membufChips;

    //In the enable path, only modify function chips, but in the
    // disable path we want to touch everybody
    bool func_only = true;
    if( IBSCOM_DISABLE == i_disable )
    {
        func_only = false;
    }
    TARGETING::getAllChips(membufChips, TYPE_MEMBUF, func_only);

    mutex_t* l_mutex = NULL;

    TARGETING::Target * sys = NULL;
    TARGETING::targetService().getTopLevelTarget(sys);

    uint8_t l_override =
      sys->getAttr<TARGETING::ATTR_IBSCOM_ENABLE_OVERRIDE>();
    TRACFCOMP(g_trac_ibscom,"IBSCOM_ENABLE_OVERRIDE=%d",l_override);

    for(uint32_t i=0; i<membufChips.size(); i++)
    {
        TARGETING::Target* mb = membufChips[i];

        // If the membuf chip supports IBSCOM AND..
        //   (Chip is >=DD20 OR IBSCOM Override is set)
        if( (mb->getAttr<ATTR_PRIMARY_CAPABILITIES>().supportsInbandScom)
            &&
            ( (mb->getAttr<TARGETING::ATTR_EC>() >= 0x20) ||
              (l_override != 0) )
            )
        {
            //don't mess with attributes without the mutex (just to be safe)
            l_mutex = mb->getHbMutexAttr<TARGETING::ATTR_IBSCOM_MUTEX>();
            mutex_lock(l_mutex);

            ScomSwitches l_switches = mb->getAttr<ATTR_SCOM_SWITCHES>();

            uint8_t ib_new = 1;
            uint8_t fsi_new = 0;
            if( i_disable == IBSCOM_DISABLE )
            {
                ib_new = 0;
                fsi_new = 1;
            }

            // If Inband Scom enablement changed
            if ((l_switches.useInbandScom != ib_new) ||
                (l_switches.useFsiScom != fsi_new))
            {
                l_switches.useFsiScom = fsi_new;
                l_switches.useInbandScom = ib_new;

                // Modify attribute
                membufChips[i]->setAttr<ATTR_SCOM_SWITCHES>(l_switches);

                TRACFCOMP(g_trac_ibscom,
                          "IBSCOM=%d on target HUID %.8X",
                          ib_new,
                          TARGETING::get_huid(mb));
            }

            mutex_unlock(l_mutex);
        }
    }
}


} // end namespace