path: root/src/usr/diag/prdf/common/plat/cumulus/cumulus_ex.rule

# IBM_PROLOG_BEGIN_TAG
# This is an automatically generated prolog.
#
# $Source: src/usr/diag/prdf/common/plat/cumulus/cumulus_ex.rule $
#
# OpenPOWER HostBoot Project
#
# Contributors Listed Below - COPYRIGHT 2016,2018
# [+] International Business Machines Corp.
#
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
# IBM_PROLOG_END_TAG

chip cumulus_ex
{
    name        "CUMULUS EX target";
    targettype  TYPE_EX;
    sigoff      0x9200;
    dump        DUMP_CONTENT_HW;
    scomlen     64;

# Import signatures
.include "prdfP9ExExtraSig.H";

 #############################################################################
 #                                                                           #
 #  ######                                                                   #
 #  #     #  ######   ####     ###    ####    #####  ######  #####    ####   #
 #  #     #  #       #    #     #    #          #    #       #    #  #       #
 #  ######   #####   #          #     ####      #    #####   #    #   ####   #
 #  #   #    #       #  ###     #         #     #    #       #####        #  #
 #  #    #   #       #    #     #    #    #     #    #       #   #   #    #  #
 #  #     #  ######   ####     ###    ####      #    ######  #    #   ####   #
 #                                                                           #
 #############################################################################

    ############################################################################
    # P9 EX target L2FIR
    ############################################################################

    register L2FIR
    {
        name        "P9 EX target L2FIR";
        scomaddr    0x10010800;
        reset       (&, 0x10010801);
        mask        (|, 0x10010805);
        capture     group default;
    };

    register L2FIR_MASK
    {
        name        "P9 EX target L2FIR MASK";
        scomaddr    0x10010803;
        capture     group default;
    };

    register L2FIR_ACT0
    {
        name        "P9 EX target L2FIR ACT0";
        scomaddr    0x10010806;
        capture     group default;
        capture     req nonzero("L2FIR");
    };

    register L2FIR_ACT1
    {
        name        "P9 EX target L2FIR ACT1";
        scomaddr    0x10010807;
        capture     group default;
        capture     req nonzero("L2FIR");
    };

    ############################################################################
    # P9 EX target NCUFIR
    ############################################################################

    register NCUFIR
    {
        name        "P9 EX target NCUFIR";
        scomaddr    0x10011000;
        reset       (&, 0x10011001);
        mask        (|, 0x10011005);
        capture     group default;
    };

    register NCUFIR_MASK
    {
        name        "P9 EX target NCUFIR MASK";
        scomaddr    0x10011003;
        capture     group default;
    };

    register NCUFIR_ACT0
    {
        name        "P9 EX target NCUFIR ACT0";
        scomaddr    0x10011006;
        capture     group default;
        capture     req nonzero("NCUFIR");
    };

    register NCUFIR_ACT1
    {
        name        "P9 EX target NCUFIR ACT1";
        scomaddr    0x10011007;
        capture     group default;
        capture     req nonzero("NCUFIR");
    };

    ############################################################################
    # P9 EX target L3FIR
    ############################################################################

    register L3FIR
    {
        name        "P9 EX target L3FIR";
        scomaddr    0x10011800;
        reset       (&, 0x10011801);
        mask        (|, 0x10011805);
        capture     group default;
    };

    register L3FIR_MASK
    {
        name        "P9 EX target L3FIR MASK";
        scomaddr    0x10011803;
        capture     group default;
    };

    register L3FIR_ACT0
    {
        name        "P9 EX target L3FIR ACT0";
        scomaddr    0x10011806;
        capture     group default;
        capture     req nonzero("L3FIR");
    };

    register L3FIR_ACT1
    {
        name        "P9 EX target L3FIR ACT1";
        scomaddr    0x10011807;
        capture     group default;
        capture     req nonzero("L3FIR");
    };

    ############################################################################
    # P9 EX target CMEFIR
    ############################################################################

    register CMEFIR
    {
        name        "P9 EX target CMEFIR";
        scomaddr    0x10012000;
        reset       (&, 0x10012001);
        mask        (|, 0x10012005);
        capture     group default;
    };

    register CMEFIR_MASK
    {
        name        "P9 EX target CMEFIR MASK";
        scomaddr    0x10012003;
        capture     group default;
    };

    register CMEFIR_ACT0
    {
        name        "P9 EX target CMEFIR ACT0";
        scomaddr    0x10012006;
        capture     group default;
        capture     req nonzero("CMEFIR");
    };

    register CMEFIR_ACT1
    {
        name        "P9 EX target CMEFIR ACT1";
        scomaddr    0x10012007;
        capture     group default;
        capture     req nonzero("CMEFIR");
    };

# Include registers not defined by the xml
.include "p9_common_ex_regs.rule";

};

 ##############################################################################
 #                                                                            #
 # ####                                 #                                     #
 # #   # #   # #    #####  ###      #  # #    ##  ##### ###  ###  #   #  ###  #
 # #   # #   # #    #     #        #  #   #  #  #   #    #  #   # ##  # #     #
 # ####  #   # #    ####   ###    #  ####### #      #    #  #   # # # #  ###  #
 # #  #  #   # #    #         #  #   #     # #  #   #    #  #   # #  ##     # #
 # #   #  ###  #### #####  ###  #    #     #  ##    #   ###  ###  #   #  ###  #
 #                                                                            #
 ##############################################################################

################################################################################
# Summary for EX
################################################################################

rule rEX
{
  CHECK_STOP:
    summary( 0, rL2FIR ) |
    summary( 1, rNCUFIR ) |
    summary( 2, rL3FIR ) |
    summary( 3, rCMEFIR );

  RECOVERABLE:
    summary( 0, rL2FIR ) |
    summary( 1, rNCUFIR ) |
    summary( 2, rL3FIR ) |
    summary( 3, rCMEFIR );

};

group gEX attntype CHECK_STOP, RECOVERABLE filter singlebit
{
    (rEX, bit(0)) ? analyze(gL2FIR);
    (rEX, bit(1)) ? analyze(gNCUFIR);
    (rEX, bit(2)) ? analyze(gL3FIR);
    (rEX, bit(3)) ? analyze(gCMEFIR);
};

################################################################################
# P9 EX target L2FIR
################################################################################

rule rL2FIR
{
  CHECK_STOP:
    L2FIR & ~L2FIR_MASK & ~L2FIR_ACT0 & ~L2FIR_ACT1;
  RECOVERABLE:
    L2FIR & ~L2FIR_MASK & ~L2FIR_ACT0 &  L2FIR_ACT1;
};

group gL2FIR filter singlebit, cs_root_cause( 1, 17, 18, 20 )
{
    /** L2FIR[0]
     *  L2 cache read CE
     */
    (rL2FIR, bit(0)) ? l2_cache_ce;

    /** L2FIR[1]
     *  L2 cache read UE
     */
    (rL2FIR, bit(1)) ? l2_cache_ue_UERE;

    /** L2FIR[2]
     *  L2 cache read SUE
     */
    (rL2FIR, bit(2)) ? defaultMaskedError;

    /** L2FIR[3]
     *  Hw directory initiated line delete
     */
    (rL2FIR, bit(3)) ? defaultMaskedError;

    /** L2FIR[4]
     *  ue or sue detected by on modified line
     */
    (rL2FIR, bit(4)) ? defaultMaskedError;

    /** L2FIR[5]
     *  ue or sue detected on non-modified line
     */
    (rL2FIR, bit(5)) ? defaultMaskedError;

    /** L2FIR[6]
     *  L2 directory read CE
     */
    (rL2FIR, bit(6)) ? l2_dir_ce;

    /** L2FIR[7]
     *  L2 directory read UE
     */
    (rL2FIR, bit(7)) ? self_th_1;

    /** L2FIR[8]
     *  L2 directory CE due to stuck bit
     */
    (rL2FIR, bit(8)) ? self_th_1;

    /** L2FIR[9]
     *  L2 directory stuck bit CE repair failed
     */
    (rL2FIR, bit(9)) ? self_th_1;

    /** L2FIR[10]
     *  Muliple l2 cache dir errors
     */
    (rL2FIR, bit(10)) ? defaultMaskedError;

    /** L2FIR[11]
     *  LRU read error detected
     */
    (rL2FIR, bit(11)) ? self_th_32perDay;

    /** L2FIR[12]
     *  RC Powerbus data timeout
     */
    (rL2FIR, bit(12)) ? level2_th_1;

    /** L2FIR[13]
     *  NCU Powerbus data timeout
     */
    (rL2FIR, bit(13)) ? level2_th_1;

    /** L2FIR[14]
     *  Hardware control error
     */
    (rL2FIR, bit(14)) ? level2_M_proc_L_th_1;

    /** L2FIR[15]
     *  LRU all members in a class line deleted
     */
    (rL2FIR, bit(15)) ? self_th_1;

    /** L2FIR[16]
     *  Cache line inhibited hit cacheable space
     */
    (rL2FIR, bit(16)) ? self_th_1;

    /** L2FIR[17]
     *  (RC) load received pb cresp addr error
     */
    (rL2FIR, bit(17)) ? self_M_level2_L_th_1;

    /** L2FIR[18]
     *  (RC) store received pb cresp addr error
     */
    (rL2FIR, bit(18)) ? self_M_level2_L_th_1;

    /** L2FIR[19]
     *  Rc or NCU Pb data CE error
     */
    (rL2FIR, bit(19)) ? l2_power_bus_ce;

    /** L2FIR[20]
     *  RC or NCU Pb data UE error
     */
    (rL2FIR, bit(20)) ? self_th_1_UERE;

    /** L2FIR[21]
     *  RC or NCU PB data SUE detected
     */
    (rL2FIR, bit(21)) ? defaultMaskedError;

    /** L2FIR[22]
     *  TGT_NODAL_REQ_DINC_ERR
     */
    (rL2FIR, bit(22)) ? self_th_1;

    /** L2FIR[23]
     *  RC fabric op Ld cresp addr error for hyp
     */
    (rL2FIR, bit(23)) ? defaultMaskedError;

    /** L2FIR[24]
     *  PE on data from RCDAT
     */
    (rL2FIR, bit(24)) ? self_th_1;

    /** L2FIR[25]
     *  L2 castout or CN cresp addr err
     */
    (rL2FIR, bit(25)) ? self_M_level2_L_th_1;

    /** L2FIR[26]
     *  LVDIR tracking PE
     */
    (rL2FIR, bit(26)) ? self_th_32perDay;

    /** L2FIR[27]
     *  RC fabric op cresp=ack_dead error
     */
    (rL2FIR, bit(27)) ? defaultMaskedError;

    /** L2FIR[28]
     *  Darn data timeout
     */
    (rL2FIR, bit(28)) ? self_th_1;

    /** L2FIR[29]
     *  RC fabric op store cresp/misc error
     */
    (rL2FIR, bit(29)) ? defaultMaskedError;

    /** L2FIR[30:35]
     *  spare
     */
    (rL2FIR, bit(30|31|32|33|34|35)) ? defaultMaskedError;

    /** L2FIR[36]
     *  Cache CE and UE in short time period
     */
    (rL2FIR, bit(36)) ? threshold_and_mask_self;

    /** L2FIR[37:38]
     *  spare
     */
    (rL2FIR, bit(37|38)) ? defaultMaskedError;

    /** L2FIR[39]
     *  reserved
     */
    (rL2FIR, bit(39)) ? defaultMaskedError;

    /** L2FIR[40]
     *  scom error
     */
    (rL2FIR, bit(40)) ? defaultMaskedError;

    /** L2FIR[41]
     *  scom error
     */
    (rL2FIR, bit(41)) ? defaultMaskedError;

};

################################################################################
# P9 EX target NCUFIR
################################################################################

rule rNCUFIR
{
  CHECK_STOP:
    NCUFIR & ~NCUFIR_MASK & ~NCUFIR_ACT0 & ~NCUFIR_ACT1;
  RECOVERABLE:
    NCUFIR & ~NCUFIR_MASK & ~NCUFIR_ACT0 &  NCUFIR_ACT1;
};

group gNCUFIR filter singlebit, cs_root_cause( 3, 4, 7, 8 )
{
    /** NCUFIR[0]
     *  NCU store queue control error
     */
    (rNCUFIR, bit(0)) ? self_th_1;

    /** NCUFIR[1]
     *  TLBIE control error.
     */
    (rNCUFIR, bit(1)) ? level2_M_self_L_th_1;

    /** NCUFIR[2]
     *  TL or SLBIEG illegal fields from core.
     */
    (rNCUFIR, bit(2)) ? level2_M_self_L_th_1;

    /** NCUFIR[3]
     *  NCU Store Address Error
     */
    (rNCUFIR, bit(3)) ? self_M_level2_L_th_1;

    /** NCUFIR[4]
     *  NCU load Address Error
     */
    (rNCUFIR, bit(4)) ? self_M_level2_L_th_1;

    /** NCUFIR[5]
     *  Store received ack_dead.
     */
    (rNCUFIR, bit(5)) ? defaultMaskedError;

    /** NCUFIR[6]
     *  Load received ack_dead.
     */
    (rNCUFIR, bit(6)) ? defaultMaskedError;

    /** NCUFIR[7]
     *  MSGSND received addr_err
     */
    (rNCUFIR, bit(7)) ? self_M_level2_L_th_1;

    /** NCUFIR[8]
     *  NCU Store Queue Data Parity Err
     */
    (rNCUFIR, bit(8)) ? self_th_1_UERE;

    /** NCUFIR[9]
     *  store timed out on pb
     */
    (rNCUFIR, bit(9)) ? threshold_and_mask_self;

    /** NCUFIR[10]
     *  tlbie master timeout
     */
    (rNCUFIR, bit(10)) ? level2_M_self_L_th_1;

    /** NCUFIR[11]
     *  NCU no response to snooped TLBIE
     */
    (rNCUFIR, bit(11)) ? level2_M_self_L_th_1;

    /** NCUFIR[12]
     *  ima cresp addr error
     */
    (rNCUFIR, bit(12)) ? self_M_level2_L_th_1;

    /** NCUFIR[13]
     *  ima received ack_dead
     */
    (rNCUFIR, bit(13)) ? defaultMaskedError;

    /** NCUFIR[14]
     *  pmisc cresp addr err
     */
    (rNCUFIR, bit(14)) ? self_M_level2_L_th_1;

    /** NCUFIR[15]
     *  PPE read cresp address error
     */
    (rNCUFIR, bit(15)) ? self_M_level2_L_th_1;

    /** NCUFIR[16]
     *  PPE write cresp address error
     */
    (rNCUFIR, bit(16)) ? self_M_level2_L_th_1;

    /** NCUFIR[17]
     *  ppe read received ack dead
     */
    (rNCUFIR, bit(17)) ? defaultMaskedError;

    /** NCUFIR[18]
     *  ppe write received ack dead
     */
    (rNCUFIR, bit(18)) ? defaultMaskedError;

    /** NCUFIR[19]
     *  tgt nodal ppe write received ack dead
     */
    (rNCUFIR, bit(19)) ? defaultMaskedError;

    /** NCUFIR[20]
     *  darn ttype while darn not enabled
     */
    (rNCUFIR, bit(20)) ? level2_M_self_L_th_1;

    /** NCUFIR[21]
     *  Darn cresp address error
     */
    (rNCUFIR, bit(21)) ? level2_M_self_L_th_1;

    /** NCUFIR[22:28]
     *  spare
     */
    (rNCUFIR, bit(22|23|24|25|26|27|28)) ? defaultMaskedError;

    /** NCUFIR[29]
     *  scom error
     */
    (rNCUFIR, bit(29)) ? defaultMaskedError;

    /** NCUFIR[30]
     *  scom error
     */
    (rNCUFIR, bit(30)) ? defaultMaskedError;

};

################################################################################
# P9 EX target L3FIR
################################################################################

rule rL3FIR
{
  CHECK_STOP:
    L3FIR & ~L3FIR_MASK & ~L3FIR_ACT0 & ~L3FIR_ACT1;
  RECOVERABLE:
    L3FIR & ~L3FIR_MASK & ~L3FIR_ACT0 &  L3FIR_ACT1;
};

group gL3FIR filter singlebit, cs_root_cause( 5, 8, 11, 17, 21 )
{
    /** L3FIR[0]
     *  L3_RDDSP_SEGR_LCO_ALL_MEM_UNAVAIL_ERR
     */
    (rL3FIR, bit(0)) ? self_th_1;

    /** L3FIR[1:2]
     *  spare
     */
    (rL3FIR, bit(1|2)) ? defaultMaskedError;

    /** L3FIR[3]
     *  L3 cache CE and UE within a short period
     */
    (rL3FIR, bit(3)) ? threshold_and_mask_self;

    /** L3FIR[4]
     *  CE detected on L3 cache read
     */
    (rL3FIR, bit(4)) ? l3_cache_ce;

    /** L3FIR[5]
     *  UE detected on L3 cache read
     */
    (rL3FIR, bit(5)) ? l3_cache_ue_UERE;

    /** L3FIR[6]
     *  SUE detected on L3 cache read
     */
    (rL3FIR, bit(6)) ? defaultMaskedError;

    /** L3FIR[7]
     *  L3 cache write data CE from Power Bus
     */
    (rL3FIR, bit(7)) ? self_th_32perDay;

    /** L3FIR[8]
     *  L3 cache write data UE from Power Bus
     */
    (rL3FIR, bit(8)) ? self_th_1_UERE;

    /** L3FIR[9]
     *  L3 cache write data sue from Power Bus
     */
    (rL3FIR, bit(9)) ? defaultMaskedError;

    /** L3FIR[10]
     *  L3 cache write data CE from L2
     */
    (rL3FIR, bit(10)) ? self_th_32perDay;

    /** L3FIR[11]
     *  L3 cache write data UE from L2
     */
    (rL3FIR, bit(11)) ? l3_cache_ue_UERE;

    /** L3FIR[12]
     *  L3 cache write SUE from L2
     */
    (rL3FIR, bit(12)) ? defaultMaskedError;

    /** L3FIR[13]
     *  L3 DIR read CE
     */
    (rL3FIR, bit(13)) ? l3_dir_ce;

    /** L3FIR[14]
     *  L3 Dir read UE
     */
    (rL3FIR, bit(14)) ? self_th_1;

    /** L3FIR[15]
     *  Dir error not found during corr seq.
     */
    (rL3FIR, bit(15)) ? defaultMaskedError;

    /** L3FIR[16]
     *  addr_error cresp for mem SN or CO
     */
    (rL3FIR, bit(16)) ? self_M_level2_L_th_1;

    /** L3FIR[17]
     *  Received addr_error cresp for Prefetch
     */
    (rL3FIR, bit(17)) ? self_M_level2_L_th_1;

    /** L3FIR[18]
     *  An L3 machine hung waiting for PB cresp
     */
    (rL3FIR, bit(18)) ? defaultMaskedError;

    /** L3FIR[19]
     *  Invalid LRU count error
     */
    (rL3FIR, bit(19)) ? defaultMaskedError;

    /** L3FIR[20]
     *  CE detected on PowerBus read for PPE
     */
    (rL3FIR, bit(20)) ? self_th_32perDay;

    /** L3FIR[21]
     *  UE detected on PowerBus read for PPE
     */
    (rL3FIR, bit(21)) ? self_th_1_UERE;

    /** L3FIR[22]
     *  L3 PPE SUE
     */
    (rL3FIR, bit(22)) ? defaultMaskedError;

    /** L3FIR[23]
     *  L3 mach hang
     */
    (rL3FIR, bit(23)) ? self_M_level2_L_th_1;

    /** L3FIR[24]
     *  L3 Hw control err
     */
    (rL3FIR, bit(24)) ? self_th_1;

    /** L3FIR[25]
     *  Cache inhitited op in L3 directory
     */
    (rL3FIR, bit(25)) ? self_M_level2_L_th_1;

    /** L3FIR[26]
     *  L3 line delete CE done
     */
    (rL3FIR, bit(26)) ? defaultMaskedError;

    /** L3FIR[27]
     *  L3 DRAM logic error
     */
    (rL3FIR, bit(27)) ? self_th_1;

    /** L3FIR[28]
     *  L3 LRU array parity error
     */
    (rL3FIR, bit(28)) ? l3_lru_parity_error;

    /** L3FIR[29]
     *  L3 cache congruence class deleted
     */
    (rL3FIR, bit(29)) ? self_th_1;

    /** L3FIR[30]
     *  L3 cache timer refresh error
     */
    (rL3FIR, bit(30)) ? self_th_1;

    /** L3FIR[31]
     *  L3 PowerBus Master Write CRESP ack_dead
     */
    (rL3FIR, bit(31)) ? defaultMaskedError;

    /** L3FIR[32]
     *  PB Master Read received ack_dead CRESP
     */
    (rL3FIR, bit(32)) ? defaultMaskedError;

    /** L3FIR[33]
     *  scom error
     */
    (rL3FIR, bit(33)) ? defaultMaskedError;

    /** L3FIR[34]
     *  scom error
     */
    (rL3FIR, bit(34)) ? defaultMaskedError;

};

################################################################################
# P9 EX target CMEFIR
################################################################################

rule rCMEFIR
{
  CHECK_STOP:
    CMEFIR & ~CMEFIR_MASK & ~CMEFIR_ACT0 & ~CMEFIR_ACT1;
  RECOVERABLE:
    CMEFIR & ~CMEFIR_MASK & ~CMEFIR_ACT0 &  CMEFIR_ACT1;
};

group gCMEFIR filter singlebit, cs_root_cause
{
    /** CMEFIR[0]
     *  PPE asserted an internal error
     */
    (rCMEFIR, bit(0)) ? TBDDefaultCallout;

    /** CMEFIR[1]
     *  PPE  external interface error
     */
    (rCMEFIR, bit(1)) ? TBDDefaultCallout;

    /** CMEFIR[2]
     *  PPE  lack of forward progress
     */
    (rCMEFIR, bit(2)) ? TBDDefaultCallout;

    /** CMEFIR[3]
     *  PPE software-requested breakpoint event.
     */
    (rCMEFIR, bit(3)) ? TBDDefaultCallout;

    /** CMEFIR[4]
     *  PPE watchdog timeout
     */
    (rCMEFIR, bit(4)) ? TBDDefaultCallout;

    /** CMEFIR[5]
     *  PPE asserted a halt condition.
     */
    (rCMEFIR, bit(5)) ? defaultMaskedError;

    /** CMEFIR[6]
     *  PPE asserted a debug trigger
     */
    (rCMEFIR, bit(6)) ? defaultMaskedError;

    /** CMEFIR[7]
     *  PPE SRAM Uncorrectable Error.
     */
    (rCMEFIR, bit(7)) ? self_th_1;

    /** CMEFIR[8]
     *  SRAM Correctable Error
     */
    (rCMEFIR, bit(8)) ? threshold_and_mask_self;

    /** CMEFIR[9]
     *  Scrub timer tick, scrub still pending
     */
    (rCMEFIR, bit(9)) ? threshold_and_mask_self;

    /** CMEFIR[10]
     *  Block Copy Engine Error
     */
    (rCMEFIR, bit(10)) ? defaultMaskedError;

    /** CMEFIR[11:12]
     *  spare
     */
    (rCMEFIR, bit(11|12)) ? defaultMaskedError;

    /** CMEFIR[13]
     *  Dropout detected on Core0 Chiplet iVRM
     */
    (rCMEFIR, bit(13)) ? defaultMaskedError;

    /** CMEFIR[14]
     *  Dropout detected on Core1 Chiplet iVRM
     */
    (rCMEFIR, bit(14)) ? defaultMaskedError;

    /** CMEFIR[15]
     *  CME Dropout Cache Chiplet iVRM.
     */
    (rCMEFIR, bit(15)) ? defaultMaskedError;

    /** CMEFIR[16]
     *  CME Extreme Droop over time exceeded
     */
    (rCMEFIR, bit(16)) ? defaultMaskedError;

    /** CMEFIR[17]
     *  CME Large Droop exceeded
     */
    (rCMEFIR, bit(17)) ? defaultMaskedError;

    /** CMEFIR[18]
     *  CME Small Droop exceeded
     */
    (rCMEFIR, bit(18)) ? defaultMaskedError;

    /** CMEFIR[19]
     *  Detected non-thermometer code
     */
    (rCMEFIR, bit(19)) ? defaultMaskedError;

    /** CMEFIR[20]
     *  scom error
     */
    (rCMEFIR, bit(20)) ? defaultMaskedError;

    /** CMEFIR[21]
     *  scom error
     */
    (rCMEFIR, bit(21)) ? defaultMaskedError;

};

 ##############################################################################
 #                                                                            #
 #    #                                  ###                                  #
 #   # #    ##  ##### ###  ###  #   #   #   # #     #    ###   ###  ###  ###  #
 #  #   #  #  #   #    #  #   # ##  #   #     #    # #  #     #     #   #     #
 # ####### #      #    #  #   # # # #   #     #   #####  ###   ###  ##   ###  #
 # #     # #  #   #    #  #   # #  ##   #   # #   #   #     #     # #       # #
 # #     #  ##    #   ###  ###  #   #    ###  ### #   #  ###   ###  ###  ###  #
 #                                                                            #
 ##############################################################################

# Include the actions defined for this target
.include "p9_common_actions.rule";
.include "p9_common_ex_actions.rule";