path: root/src/import/chips/p9/procedures/hwp/nest/p9_revert_sbe_mcs_setup.C

/* IBM_PROLOG_BEGIN_TAG                                                   */
/* This is an automatically generated prolog.                             */
/*                                                                        */
/* $Source: src/import/chips/p9/procedures/hwp/nest/p9_revert_sbe_mcs_setup.C $ */
/*                                                                        */
/* OpenPOWER HostBoot Project                                             */
/*                                                                        */
/* Contributors Listed Below - COPYRIGHT 2015,2018                        */
/* [+] International Business Machines Corp.                              */
/*                                                                        */
/*                                                                        */
/* Licensed under the Apache License, Version 2.0 (the "License");        */
/* you may not use this file except in compliance with the License.       */
/* You may obtain a copy of the License at                                */
/*                                                                        */
/*     http://www.apache.org/licenses/LICENSE-2.0                         */
/*                                                                        */
/* Unless required by applicable law or agreed to in writing, software    */
/* distributed under the License is distributed on an "AS IS" BASIS,      */
/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        */
/* implied. See the License for the specific language governing           */
/* permissions and limitations under the License.                         */
/*                                                                        */
/* IBM_PROLOG_END_TAG                                                     */
///
/// @file p9_revert_sbe_mcs_setup.C
/// @brief Revert MC configuration applied by SBE (FAPI2)
///
/// @author Joe McGill <jmcgill@us.ibm.com>
///

//
// *HWP HWP Owner: Joe McGill <jmcgill@us.ibm.com>
// *HWP FW Owner: Thi Tran <thi@us.ibm.com>
// *HWP Team: Nest
// *HWP Level: 3
// *HWP Consumed by: HB
//

//------------------------------------------------------------------------------
// Includes
//------------------------------------------------------------------------------
#include <p9_revert_sbe_mcs_setup.H>
#include <p9_perv_scom_addresses.H>
#include <p9_mc_scom_addresses.H>
#include <p9_mc_scom_addresses_fld.H>

//------------------------------------------------------------------------------
// Constant definitions
//------------------------------------------------------------------------------

// MCS/MI target type constants
const uint8_t NUM_MCS_MI_TARGETS = 4;

const uint64_t MCS_CPLT_CTRL1_ARR[NUM_MCS_MI_TARGETS] =
{
    PERV_N3_CPLT_CTRL1,
    PERV_N3_CPLT_CTRL1,
    PERV_N1_CPLT_CTRL1,
    PERV_N1_CPLT_CTRL1
};

const uint64_t MCS_CPLT_CTRL1_BIT_ARR[NUM_MCS_MI_TARGETS] =
{
    10,
    10,
    9,
    9
};

const uint64_t MCS_MCFGP_ARR[NUM_MCS_MI_TARGETS] =
{
    MCS_0_MCFGP,
    MCS_1_MCFGP,
    MCS_2_MCFGP,
    MCS_3_MCFGP
};
const uint64_t MCS_MCMODE1_ARR[NUM_MCS_MI_TARGETS] =
{
    MCS_0_MCMODE1,
    MCS_1_MCMODE1,
    MCS_2_MCMODE1,
    MCS_3_MCMODE1
};
const uint64_t MCS_MCPERF1_ARR[NUM_MCS_MI_TARGETS] =
{
    MCS_0_MCPERF1,
    MCS_1_MCPERF1,
    MCS_2_MCPERF1,
    MCS_3_MCPERF1
};
const uint64_t MCS_MCFIRMASK_OR_ARR[NUM_MCS_MI_TARGETS] =
{
    MCS_0_MCFIRMASK_OR,
    MCS_1_MCFIRMASK_OR,
    MCS_2_MCFIRMASK_OR,
    MCS_3_MCFIRMASK_OR
};

const uint64_t MCS_MCMODE1_DISABLE_SPEC_OP_DCBF_BIT = 45;

//------------------------------------------------------------------------------
// Function definitions
//------------------------------------------------------------------------------

///
/// @brief helper function to revert HB dcbz configuration
///
/// @tparam T template parameter, passed in target.
/// @param[in] i_target Reference to a chip target
/// @param[in] i_mc_targets Vector of present MCS/MI unit targets
/// @return FAPI2_RC_SUCCESS if success, else error code.
///
template<fapi2::TargetType T>
fapi2::ReturnCode
revert_mc_hb_dcbz_config(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const std::vector<fapi2::Target<T>>& i_mc_targets)
{
    FAPI_DBG("Start");

    for (auto l_mc_target : i_mc_targets)
    {
        fapi2::buffer<uint64_t> l_cplt_ctrl1;
        fapi2::buffer<uint64_t> l_mcfgp;
        fapi2::buffer<uint64_t> l_mcmode1;
        fapi2::buffer<uint64_t> l_mcperf1;
        fapi2::buffer<uint64_t> l_mcfirmask;
        uint8_t l_mc_pos = 0;
        fapi2::ATTR_CHIP_EC_FEATURE_HW414958_Type l_hw414958 = 0;
        FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_CHIP_EC_FEATURE_HW414958,
                               i_target,
                               l_hw414958),
                 "Error from FAPI_ATTR_GET (fapi2::ATTR_CHIP_EC_FEATURE_HW414958)");

        FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_CHIP_UNIT_POS,
                               l_mc_target,
                               l_mc_pos),
                 "Error from FAPI_ATTR_GET (ATTR_CHIP_UNIT_POS)");

        FAPI_TRY(fapi2::getScom(i_target,
                                MCS_CPLT_CTRL1_ARR[l_mc_pos],
                                l_cplt_ctrl1),
                 "Error from getscom (CPLT_CTRL1)");

        if (!l_cplt_ctrl1.getBit(MCS_CPLT_CTRL1_BIT_ARR[l_mc_pos]))
        {
            // MCFGP -- mark BAR invalid & reset grouping configuration fields
            FAPI_TRY(fapi2::getScom(i_target,
                                    MCS_MCFGP_ARR[l_mc_pos],
                                    l_mcfgp),
                     "Error from getScom (MCS%d_MCFGP)", l_mc_pos);
            l_mcfgp.clearBit<MCS_MCFGP_VALID>();
            l_mcfgp.clearBit<MCS_MCFGP_MC_CHANNELS_PER_GROUP,
                             MCS_MCFGP_MC_CHANNELS_PER_GROUP_LEN>();
            l_mcfgp.clearBit<MCS_MCFGP_CHANNEL_0_GROUP_MEMBER_IDENTIFICATION,
                             MCS_MCFGP_CHANNEL_0_GROUP_MEMBER_IDENTIFICATION_LEN>();
            l_mcfgp.clearBit<MCS_MCFGP_GROUP_SIZE, MCS_MCFGP_GROUP_SIZE_LEN>();
            FAPI_TRY(fapi2::putScom(i_target,
                                    MCS_MCFGP_ARR[l_mc_pos],
                                    l_mcfgp),
                     "Error from putScom (MCS%d_MCFGP)", l_mc_pos);

            // MCMODE1 -- enable speculation, cmd bypass, fp command bypass
            FAPI_TRY(fapi2::getScom(i_target,
                                    MCS_MCMODE1_ARR[l_mc_pos],
                                    l_mcmode1),
                     "Error from getScom (MCS%d_MCMODE1)", l_mc_pos);
            l_mcmode1.clearBit<MCS_MCMODE1_DISABLE_ALL_SPEC_OPS>();
            l_mcmode1.clearBit<MCS_MCMODE1_DISABLE_SPEC_OP,
                               MCS_MCMODE1_DISABLE_SPEC_OP_LEN>();

            // We need to set dcbf bit
            if (l_hw414958)
            {
                l_mcmode1.setBit<MCS_MCMODE1_DISABLE_SPEC_OP_DCBF_BIT>();
            }

            l_mcmode1.clearBit<MCS_MCMODE1_DISABLE_COMMAND_BYPASS,
                               MCS_MCMODE1_DISABLE_COMMAND_BYPASS_LEN>();
            l_mcmode1.clearBit<MCS_MCMODE1_DISABLE_FP_COMMAND_BYPASS>();
            FAPI_TRY(fapi2::putScom(i_target,
                                    MCS_MCMODE1_ARR[l_mc_pos],
                                    l_mcmode1),
                     "Error from putScom (MCS%d_MCMODE1)", l_mc_pos);

            // MCS_MCPERF1 -- enable fast path
            FAPI_TRY(fapi2::getScom(i_target,
                                    MCS_MCPERF1_ARR[l_mc_pos],
                                    l_mcperf1),
                     "Error from getScom (MCS%d_MCPERF1)", l_mc_pos);
            l_mcperf1.clearBit<MCS_MCPERF1_DISABLE_FASTPATH>();
            FAPI_TRY(fapi2::putScom(i_target,
                                    MCS_MCPERF1_ARR[l_mc_pos],
                                    l_mcperf1),
                     "Error from putScom (MCS%d_MCPERF1)", l_mc_pos);

            // Re-mask MCFIR. We want to ensure all MCSs are masked
            // until the BARs are opened later during IPL.
            l_mcfirmask.flush<1>();
            FAPI_TRY(fapi2::putScom(i_target,
                                    MCS_MCFIRMASK_OR_ARR[l_mc_pos],
                                    l_mcfirmask),
                     "Error from putScom (MCS % d_MCFIRMASK_OR)", l_mc_pos);
        }
    }

fapi_try_exit:
    FAPI_DBG("End");
    return fapi2::current_err;
}

fapi2::ReturnCode
p9_mask_sbe_perv_firs(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target)
{
    FAPI_INF("p9_mask_sbe_perv_firs:: masking tp_lfir (0x104000A) bits 22:30");
    fapi2::buffer<uint64_t> l_tp_local_firmask;
    constexpr uint64_t literal_0x000003FE00000000 =  0x000003FE00000000;
    l_tp_local_firmask.insert<0, 64, 0, uint64_t>(literal_0x000003FE00000000);

    FAPI_TRY(fapi2::putScom(i_target,
                            PERV_TP_LOCAL_FIR_MASK_OR,
                            l_tp_local_firmask),
             "Error from performing putScom on address = 0x%lx with value "
             "= 0x%lx", PERV_TP_LOCAL_FIR_MASK_OR, literal_0x000003FE00000000);

fapi_try_exit:
    FAPI_INF("p9_mask_sbe_perv_firs:: End");
    return fapi2::current_err;

}


// HWP entry point
fapi2::ReturnCode
p9_revert_sbe_mcs_setup(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    bool i_maskPervSbeFirs)
{
    FAPI_INF("Start");

    if(i_maskPervSbeFirs)
    {
        p9_mask_sbe_perv_firs(i_target);
    }

    fapi2::ATTR_SYSTEM_IPL_PHASE_Type l_ipl_phase;
    auto l_mcs_chiplets = i_target.getChildren<fapi2::TARGET_TYPE_MCS>(
                              fapi2::TARGET_STATE_PRESENT);
    auto l_mi_chiplets = i_target.getChildren<fapi2::TARGET_TYPE_MI>(
                             fapi2::TARGET_STATE_PRESENT);

    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SYSTEM_IPL_PHASE,
                           fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(),
                           l_ipl_phase),
             "Error from FAPI_ATTR_GET (ATTR_SYSTEM_IPL_PHASE)");

    if (l_ipl_phase == fapi2::ENUM_ATTR_SYSTEM_IPL_PHASE_CHIP_CONTAINED)
    {
        FAPI_INF("Leaving MC BAR configured for chip contained execution");
        goto fapi_try_exit;
    }

    if (l_mcs_chiplets.size())
    {
        FAPI_TRY(revert_mc_hb_dcbz_config<fapi2::TARGET_TYPE_MCS>(
                     i_target,
                     l_mcs_chiplets),
                 "Error from revert_mcs_hb_dcbz_config (MCS)");

    }
    else if (l_mi_chiplets.size())
    {
        FAPI_TRY(revert_mc_hb_dcbz_config<fapi2::TARGET_TYPE_MI>(
                     i_target,
                     l_mi_chiplets),
                 "Error from revert_mi_hb_dcbz_config (MI)");
    }
    else
    {
        FAPI_INF("No MCS/MI targets found! Nothing to do!");
    }

fapi_try_exit:
    FAPI_INF("End");
    return fapi2::current_err;
}