path: root/src/build/citest/autocitest

#!/bin/bash
# IBM_PROLOG_BEGIN_TAG
# This is an automatically generated prolog.
#
# $Source: src/build/citest/autocitest $
#
# OpenPOWER HostBoot Project
#
# Contributors Listed Below - COPYRIGHT 2011,2018
# [+] International Business Machines Corp.
#
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
# IBM_PROLOG_END_TAG
################################################################################
##  Simics automation using autosim
##  2011-05-23  mww modified to run hostboot in simics
##  2011-06-02  mww check in first working version.
##                  Profuse thanks to Patrick Williams for getting this going
##                  on the Jenkins server!!
##
##  Usage:
##       autocitest [--quiet] <backing_build> <sandbox_name> <hbi_image>
################################################################################
function    waitkb()
{

    ##  wait for kbhit to continue
    ## echo "Hit any key to continue"
    ## read kb
    echo "."
}

function   usage()
{

    echo    "usage:"
    echo    "$0 [--quiet]  backing_tree_dir  sandbox_name  path_to_hbicore_test_img    "
}


function    stopsim()
{
    # Stop simics
    echo "Stopping simics"
    autosim $NOWIN $VERBOSE --stopsim
    if [ $? -ne 0 ] ; then
        echo "WARNING: Unable to stop simics cleanly"
    fi
}


function    stopserver()
{
    # Stop simics server
    echo "Stopping simics server"
    autosim $NOWIN $VERBOSE --stopserver
    if [ $? -ne 0 ] ; then
        echo "WARNING: Unable to stop simics server cleanly"
    fi
}


function    runtraceHB()
{

    echo    "Collect traceHB info..."

    #autosim $NOWIN --simcmd   "run-python-file ${SBXHOME}/src/build/simics/hb-simdebug.py"
    #if [ $? -ne 0 ] ; then
    #    echo "ERROR 3: Unable to run $?"
    #    stopsim
    #    stopserver
    #    exit 1
    #fi

    autosim $NOWIN --simcmd   "pipe hb-trace \"cat > traceHB.log\"" \
            --timeout 300
    if [ $? -ne 0 ] ; then
        echo "ERROR 4 : Unable to run $?"
        stopsim
        stopserver
        exit 1
    fi

    mv ${SANDBOXBASE}/simics/traceHB.log ${SBXHOME}/traceHB.log
}


##  verbose is the default.
VERBOSE=" --verbose"
if [ "$1" = "--quiet" ] ; then
        VERBOSE=""
        shift
fi

##
##  set up
##
DRIVER="$1"                     ##  backing tree
export bb=$DRIVER               ##  simulate a workon
HBICORE_TEST="$2"               ##  path to hbicore_test.img

export SHELL="/bin/bash"        ##  Needed to fool workon to launch a bash
                                ##  shell, which autosim expects.
NOWIN="--nowin"                 ##  remote execution does not have a display

##  jenkins creates a new workspace for every compile.
##     cxxtest-start.sh will verify this and then export WORKSPACE_DIR for us.
SBXHOME=$PROJECT_ROOT

if [ "$DRIVER" = "" ] ; then
        echo "ERROR: you must specify a driver (backing tree) to run the tests with"
        usage
        exit 1
fi

if [ ! -f "${SBXHOME}/${HBICORE_TEST}" ] ; then
        echo "ERROR: you must specify a valid hbicore_test.bin file."
        usage
        exit 1
fi

##  Find the .syms file for the image.  Remove extension, add .syms.
HBICORE_TEST_SYMS="${HBICORE_TEST%%.*}.syms"

## let's get set up
cd $SBXHOME

echo    "$0"
echo    "VERBOSE                    = $VERBOSE"
echo    "NOWIN                      = $NOWIN"
echo    "BACKING_TREE               = $DRIVER"
echo    "HBICORE_TEST               = $HBICORE_TEST"
echo    "HBICORE_TEST_SYMS          = $HBICORE_TEST_SYMS"
echo    "SANDBOXRC                  = $SANDBOXRC"
echo    "SBXHOME                    = $SBXHOME"
echo    "current directory is " `pwd`

waitkb


timestamp=`date +'%H:%M:%S'`
echo "$timestamp Starting autosample test..."

# see simics license usage
tail -n 500 /afs/rch/usr4/dlarson/public/stats/lic_usage.txt | grep hindsight

# Run set up in current shell
echo    "run autosimsetup.."
export AUTOSIM_WORKDIR=$SANDBOXBASE
. autosimsetup

waitkb

# Start the simics server
echo "Starting simics server in sandbox $SANDBOXNAME on machine $MACHINE"
autosim $NOWIN $VERBOSE --startserver --wp --sandbox $SANDBOXNAME --machine $MACHINE
if [ $? -ne 0 ] ; then
        echo "ERROR: Unable to start simics server $?"
        exit 1
fi

waitkb

# If we are running under Jenkins, do "no remote execution" because built in
# /tmp.
if [ -z $RUNNING_UNDER_JENKINS -a -z $SANDBOX_IN_TEMP ];
then
    NRE=""
else
    # Trick autosim into thinking we're running on a vexec system.
    echo "echo \"Running on server $HOSTNAME ---\"" >> \
            ${SANDBOXBASE}/obj/ppc/simu/scripts/hbfw/startup.simics
    NRE="--sim_parms -nre"
fi

# Start simics and wait for it to reach standby
echo "Attempting to start simics"

#autosim $VERBOSE --startsim --chkpt standby <<< chkpt not working yet
max_start_simics_attempts=5
current_attempts=0
while [ $current_attempts -lt $max_start_simics_attempts ]; do
    echo "> Attempt $current_attempts/$max_start_simics_attempts to start simics"
    autosim $NOWIN $VERBOSE --startsim $NRE --notar
    if [ $? -ne 0 ] ; then
        # Do not fail until max attempts tried
        if [ $current_attempts -ge $max_start_simics_attempts ]; then
            echo ">> ERROR: Unable to start simics $?"
            stopserver      ##  kill the server again.
            exit 1
        fi
        echo ">> Failed: trying to start simics again"
        sleep 15
    else
        echo ">> Success: started simics"
        break
    fi
    ((current_attempts++))
done

waitkb

# open simics telnet port
autosim --simtelnet
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to open simics telnet port $?"
    exit 1
fi

waitkb

##  We need to be careful to get hostboot's HRMOR so
##  allow SBE and HBBL to boot and for hostboot to get started
echo "Wait for SBE and Hostboot bootloader to complete."
echo
echo "==================================="
echo
BL_HRMOR=0x8200000
loopcount=1
while true; do
    sleep 5
    HRMOR=`autosim $NOWIN --simcmd   "python \"getHRMOR()\""| tr -d '\n\r'`
    echo "HRMOR = $HRMOR"

    if [[ "$HRMOR" -ne "$BL_HRMOR" ]] && [[ "$HRMOR" -ne 0 ]]; then
        echo "SBE and Hostboot bootloader completed successfully"
        break
    fi

    if [ "$loopcount" -ge 36 ];   then
        echo "ERROR: timed out after 3 minutes waiting for SBE and Hostboot bootloader completion"
        autosim $NOWIN --simcmd "sbe-trace 0"
        autosim $NOWIN --simcmd "hb-bltrace"
        stopsim
        stopserver
        exit 1
    fi
    ((loopcount++))     # increment loopcount
done
echo
echo

# Grab Bootloader trace before it gets destroyed
echo "====> dump hb-bltrace..."
autosim $NOWIN --simcmd   "pipe hb-bltrace \"cat > ${SBXHOME}/hb-bltrace.log \"" --timeout 300
if [ $? -ne 0 ] ; then
echo "ERROR: Unable to run $?"
       stopsim
       stopserver
       exit 1
fi

waitkb

##  grep for totaltests, etc.  These will appear in the hbicore_test.syms file and
## look like the following:
##      V,000292b8,00000000,00000008,CxxTest::totaltests
##      V,000292c0,00000000,00000008,CxxTest::tracecalls
##      V,000292c8,00000000,00000008,CxxTest::warnings
##      V,000292d0,00000000,00000008,CxxTest::failedtests

##  grep for the globals
echo "find totaltests, etc in ${SBXHOME}/${HBICORE_TEST_SYMS}"
totaltests_addr=`grep "CxxTest::g_TotalTests" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`
failedtests_addr=`grep "CxxTest::g_FailedTests" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`
warnings_addr=`grep "CxxTest::g_Warnings" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`
tracecalls_addr=`grep "CxxTest::g_TraceCalls" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`
mods_started_addr=`grep "CxxTest::g_ModulesStarted" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`
mods_completed_addr=`grep "CxxTest::g_ModulesCompleted" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`
shutdown_status=`grep "CpuManager::cv_shutdown_status" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`
imageId_addr=`grep "CpuManager::cv_shutdown_status" \
        ${SBXHOME}/${HBICORE_TEST_SYMS} | awk '{split($0,a,","); print a[2]}'`

#Adjust addresses for HRMOR
HRMOR=`autosim $NOWIN --simcmd   "python \"getHRMOR()\""| tr -d '\n\r'`

temp=$(($HRMOR + 0x$totaltests_addr))
totaltests_addr=`echo "obase=16; $temp" | bc`

temp=$(($HRMOR + 0x$failedtests_addr))
failedtests_addr=`echo "obase=16; $temp" | bc`

temp=$(($HRMOR + 0x$warnings_addr))
warnings_addr=`echo "obase=16; $temp" | bc`

temp=$(($HRMOR + 0x$tracecalls_addr))
tracecalls_addr=`echo "obase=16; $temp" | bc`

temp=$(($HRMOR + 0x$mods_started_addr))
mods_started_addr=`echo "obase=16; $temp" | bc`

temp=$(($HRMOR + 0x$mods_completed_addr))
mods_completed_addr=`echo "obase=16; $temp" | bc`

temp=$(($HRMOR + 0x$shutdown_status))
shutdown_status=`echo "obase=16; $temp" | bc`

temp=$((HRMOR + 0x$imageId_addr))
imageId_addr=`echo "obase=16; $temp" | bc`

##  note, don't use $VERBOSE here or you get all sorts of extra junk in the output file.
echo "Wait for unit test completion."
echo
echo "==================================="
echo
declare -i timeout=0
modsstarted=0
modscompleted=0
loopcount=1
while [ $(($modsstarted)) -lt 1 -o $(($modsstarted)) -ne $(($modscompleted)) ]; do
    sleep 20
    ((loopcount++))     # increment loopcount
    echo "loopcount = $loopcount"

    echo "modscompleted log command"
    echo "autosim $NOWIN --simcmd \"print ((system_cmp0.phys_mem).read 0x$mods_completed_addr 0x08)\"  1> $SBXHOME/modscompleted.log  2> /dev/null"
    autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$mods_completed_addr 0x08)"  1> $SBXHOME/modscompleted.log  2> /dev/null
    echo

    echo "modscompleted command"
    echo "cat $SBXHOME/modscompleted.log | awk '/0x/ {print strtonum($1)}'"
    modscompleted=`cat $SBXHOME/modscompleted.log | awk '/0x/ {print strtonum($1)}'`
    echo

    echo "modsstarted log command"
    echo "autosim $NOWIN --simcmd   \"print ((system_cmp0.phys_mem).read 0x$mods_started_addr 0x08)\"     1> $SBXHOME/modsstarted.log  2> /dev/null"
    autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$mods_started_addr 0x08)"     1> $SBXHOME/modsstarted.log  2> /dev/null
    echo

    echo "modsstarted command"
    echo "cat $SBXHOME/modsstarted.log |  awk '/0x/ {print strtonum($1)}'"
    modsstarted=`cat $SBXHOME/modsstarted.log |  awk '/0x/ {print strtonum($1)}'`
    echo

    echo "ModulesStarted:ModulesCompleted  => $modsstarted:$modscompleted"

    # @TODO RTC:149210 temporary fix for autosim hangs on real code errors. For some reason
    # when we hit an actual bug and simics halts, the autosim commands hang
    # causing this loop to take >8 hours.
    if [ -z $modsstarted ] && [ -z $modscompleted ]; then
        echo "ERROR: autosim hanging on real code errors, temporarily catching early"
        echo "See archived hbTracMerg for more info"
        exit 1
    fi

    if [ "$loopcount" -ge 150 ];   then
        timestamp=`date +'%H:%M:%S'`
        echo    "$timestamp ERROR: timed out after 50 minutes waiting for until test completion"
        autosim $NOWIN --simcmd   "hb-Ps with-backtrace"
        timeout=$(($modsstarted - $modscompleted))
        break
    fi
    echo
    echo "==================================="
    echo
done

echo "====> waiting for shutdown..."
loopcount=0
while [ "$loopcount" -lt 64 ]; do
    autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$shutdown_status 0x08)"     1> $SBXHOME/shutdown_status.log  2> /dev/null
    shutdown_yet=`cat $SBXHOME/shutdown_status.log |  awk '/0x/ {print strtonum($1)}'`
    if [ "$shutdown_yet" -ne 0 ];  then
        break
    fi
    sleep 5
    ((loopcount++))     # increment loopcount
done

# Start dumping a bunch of informaton about the simics run to various .log files
# these files will create job artifacts in Jenkins that we can use to debug issues

echo "====> dumping image id..."
autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$imageId_addr 0x08)"     1> $SBXHOME/imageId.log  2> /dev/null
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
else
    imageId=`cat $SBXHOME/imageId.log`
    echo "Image id for PNOR that was loaded into simics is: $imageId"
fi

echo "====> dump totaltests..."
    #init totalTests to be 0, which will cause test to fail collection fails
    totaltests=0
autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$totaltests_addr 0x08)"     1> $SBXHOME/totaltests.log  2> /dev/null
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
else
    totaltests=`cat $SBXHOME/totaltests.log |  awk '/0x/ {print strtonum($1)}'`
fi


echo "====> dump failedtests..."
    #init failedtests to be 1, which will cause test to fail collection fails
    failedtests=1
autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$failedtests_addr 0x08)"     1> $SBXHOME/failedtests.log  2> /dev/null
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
else
    failedtests=`cat $SBXHOME/failedtests.log |  awk '/0x/ {print strtonum($1)}'`
fi


echo "====> dump warnings..."
    #init warnings to be 1, which will cause test to fail collection fails
    warnings=1
autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$warnings_addr 0x08)"     1> $SBXHOME/warnings.log  2> /dev/null
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
else
    warnings=`cat $SBXHOME/warnings.log |  awk '/0x/ {print strtonum($1)}'`
fi

echo "====> dump tracecalls..."
autosim $NOWIN --simcmd   "print ((system_cmp0.phys_mem).read 0x$tracecalls_addr 0x08)"     1> $SBXHOME/tracecalls.log  2> /dev/null
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
else
    tracecalls=`cat $SBXHOME/tracecalls.log |  awk '/0x/ {print strtonum($1)}'`
fi


echo "====> dump printk buffer..."
autosim $NOWIN --simcmd   "pipe hb-printk \"cat > ${SBXHOME}/testprintk.log \"" --timeout 300
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
else
    echo    "----------------- Printk Buffer -------------------"
    cat $SBXHOME/testprintk.log
fi

##  run CamVan's python script to dump out the trace logs
echo "====> dump trace buffer(s)..."
runtraceHB
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
else
    echo    "----------------- traceHB Buffer -------------------"
    cat $SBXHOME/traceHB.log
fi

echo "====> dump L3..."
autosim $NOWIN --simcmd   "hb-dump"
if [ $? -ne 0 ] ; then
    echo "ERROR: Unable to run $?"
fi

########################################################
##  done.  Stop the simulation
########################################################
stopsim


## now stop the server.
stopserver


##  print out ending.
timestamp=`date +'%H:%M:%S'`

shutdown_code="$(grep --text 'Shutdown Requested' $SBXHOME/testprintk.log | awk -F '= 0x' '{ print $2 }')"


initfail=0
echo "\nShutdown Code = $shutdown_code"
if [ "${shutdown_code}" != "1230000" ] ; then
    echo "**ERROR : System did not initialize and/or shutdown properly**"
    initfail=1
fi

echo
echo    "==================================================="
if [ $timeout = 0 ] ; then
    echo    "$timestamp Finished autocitest with no Cxx errors."
else
    echo    "$timestamp Failed autocitest, modules timed out."
    echo    "    failed modules:  $timeout"
fi
echo    "    total tests:     $totaltests"
echo    "    failed tests:    $failedtests"
echo    "    warnings:        $warnings"
echo    "    trace calls:     $tracecalls"
echo    "==================================================="
echo

if [ 0 !=  $timeout ] ; then
    echo "Modules started:   $modsstarted"
    echo "Modules completed: $modscompleted"
    exit 1
fi
if [ 0 ==  $(($totaltests)) ] ; then
    echo "**ERROR : No test cases ran, check that the correct pnor image was ran**"
    exit 1
fi
if [ 0 !=  $(($failedtests)) ] ; then
    echo "**ERROR : $failedtests testcases failed, check traces to detemine what failed"
    exit 1
fi
if [ 0 != $(($warnings)) ] ; then
    echo "**ERROR : $warnings testcase warnings found, check traces to detemine what failed"
    exit 1
fi
if [ 0 != $(($initfail)) ] ; then
    echo "**ERROR : Shutdown code is expected to be 1230000 but instead is $shutdown_code, check traces to see what caused the bad shutdown "
    exit 1
fi

exit 0