summaryrefslogtreecommitdiffstats
path: root/src/usr/isteps/istep15/host_build_stop_image.C
Commit message (Collapse)AuthorAgeFilesLines
* Always position HOMER in HV space for istep 16Dean Sanner2019-11-081-72/+17
| | | | | | | | | | | | | | | | | | | | | | | | P9N/P9C always inits to DD2.x mode for hostboot which doesn't support SMF. This means that the HCODE non secure transition to HCODE secure won't work. Because of that, we now force istep 16 to always place HOMER in non SMF memory (in UV mode if SMF active) and transition into UV there. Then in istep 21 the HOMER is rebuilt correctly for SMF. Note that all the changes are in istep 15 as istep 21 uses the ATTR setup there. Change-Id: I566903dc373667a410ddcc0a1d2cc91bcd94b08d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81202 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com> Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
* SMF: Logic For Creating Non-Secure HOMER Memory SpaceIlya Smirnov2019-04-121-7/+84
| | | | | | | | | | | | | | | | | | | For SMF to be enabled, HOMER requires a small amount of non-SMF (unsecure) memory where the "jump to Ultravisor" instruction can be put (to transition to UV mode). This commit sets up a region of non-secure memory space for that purpose. Change-Id: Ib91ec69f49a4e174e65f3c2aad337a68eaa0803b RTC: 205986 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70699 Reviewed-by: Prem Shanker Jha <premjha2@in.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SMF: Put HOMER Back in SMF MemoryIlya Smirnov2019-04-041-2/+2
| | | | | | | | | | | | | | | | | It's time for HOMER to be put back on top of SMF memory. Note that this will only happen on SMF-enabled systems. Change-Id: I0a7fa5235a5f4dc5876defde340a4ae713f2e43d RTC: 202399 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/75083 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Glenn Miles <milesg@ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SMF: Temporary Put HOMER In Non-Secure MemoryIlya Smirnov2018-12-061-1/+1
| | | | | | | | | | | | | | | | | | | Skiboot is having difficulties reading OCC Common area from secure memory. This commit puts HOMER memory back in non-secure area (at all times) for the time being while the skiboot team figures out what's wrong. Change-Id: Ieda0fbb22a851cc8a5e66cf9c02c1932b29de99f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69416 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matthew Raybuck <mraybuc@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Move HOMER BAR to Secure Memory in SMF ModeIlya Smirnov2018-11-131-47/+6
| | | | | | | | | | | | | | | | | This commits enables HOMER BAR to point to the top of the secure memory on SMF-enabled systems. Consequently, the HOMER image and hostboot reserved memory will be moved to the secure memory if SMF is enabled. Change-Id: I37c7527b06688a41e57f14b4107ff53a507ffae8 RTC: 198825 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66702 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Clear out FIR Init parameters after extra PM ResetsDan Crowell2018-10-311-1/+1
| | | | | | | | | | | | | | | | | | | There are two cases where we do an extra PM reset during boot: - enabling OCC Xstop Handler - mpipl The ATTR_PM_FIRINIT_DONE_ONCE_FLAG value needs to get cleared out to force the later 'real' use of the PM complex is setup correctly. Change-Id: Ibbe8d65bd6668a88a0e933d1144cd2972f0f0340 CQ: SW449953 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68051 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SMF: Store URMOR SPR Value in host_build_stop_imageIlya Smirnov2018-10-111-0/+14
| | | | | | | | | | | | | | | | Recent changes to HCODE no longer allow for hardcoded HRMOR == URMOR, so the value of URMOR needs to be updated to match HRMOR manually in istep 15 (host_build_stop_image). Change-Id: Ia7ed7d98eb5e6b1ffe0c2839b9a6b9d36e3be895 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65759 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support HB running in SMFDean Sanner2018-09-241-1/+65
| | | | | | | | | | | | | | | | | | | | | | Support SMF for P9N/P9C. Lots of minor tweaks to make this work, but the biggest is to run userspace in problem state This is needed because for SMF Hostboot will need to run in S=1, HV=0,PR=1 (and kernel in S=1, HV=1, PR=0) This commit makes P9 HB userpsace run in HV=0 PR=1 and kernel in HV=1, PR=0. Change-Id: Ia4771df5e8858c6b7ae54b0746e62b283afb4bc4 RTC: 197243 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/50530 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set wakeup mode in istep 15 based on SMF setttingsChristian Geddes2018-09-201-3/+19
| | | | | | | | | | | | | Change-Id: I979d20fb8f38e2aa4e8fc29aebc38a7752aed5ce Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64939 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set up core checkstop escalation using HWPElizabeth Liner2018-05-221-26/+0
| | | | | | | | | | | | | | | | This commit creates the hostboot functionality around the p9_core_checkstop_handler HWP. At various points in the IPL when we want to turn off unit checkstops for system checkstops, and then later restore them, we call this HWP. Change-Id: I6f69a9c3a88707f29e4b86e9f4e3b3bd3dfd76b7 RTC: 147565 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56430 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Enable platSpecialWakeup during IPL time and add supportChristian Geddes2018-02-171-1/+1
| | | | | | | | | | | | | | | | | | Previously we only supported platSpecialWakeup at runtime because we were not worried about needed special wakeup as the cores would not go into stop state during the IPL. However, now PM code is expecting bits to be set by the p9 special wakeup hwp so we need to call it during the IPL. This code makes the handleSpecialWakeup.C/H files compatible with IPL time build environment and enables the call on the IPL time path CQ: SW415949 Change-Id: I94cca8a84946bea464b21cb95cdbbb075f766c3d Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/52858 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Story 180760 - Use self restore API to disable ATTN in HID ...Brian Bakke2017-11-071-0/+22
| | | | | | | | | | | | | | | during istep 15/16 of HCODE build/execution Change-Id: I63f54cdc35b3ff7e68120a07c142b6a557257854 RTC: 180760 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49070 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Parser for SBE and HCODE build levelMarty Gloff2017-11-061-2/+2
| | | | | | | | | | | | | | | | | Add ERRL_UDT_BUILD and associated parser for XIP image build information user detail in an error log. Change-Id: I7ef7eaa1eedd51a882d0b1a2159d2b89569ade02 RTC: 177362 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48586 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Enable Resonant ClockDean Sanner2017-09-271-4/+0
| | | | | | | | | | | | | | | | -Was manually disabled in Hostboot due to issue -This commit removes the manual disable and allows XML to control Change-Id: I991fd7619e957f0c663a025960ed447d9bbde7bf RTC:176627 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46682 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Log build level for SBE and HCODE customizationMarty Gloff2017-07-171-0/+17
| | | | | | | | | | | | | | | | | | Extract build information from the XIP header for the SBE and HCODE images. Trace the information. Also use it as FFDC for related error logs. Save the SBE build information in the SB keyword of MVPD. Change-Id: I600a71ae6cbf342643261da14f6b3b2e6bf3cbf1 RTC: 168827 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42951 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* xip_customize: GPTR/overlays stage 1 supportClaus Michael Olsen2017-07-141-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updated to poll Nimbus DD level and whether there's support for overlays in the XIP interface. Further, updated to add three extra args in xip_customize API, two of which are to support a third ring work buffer for the overlays handling. This has necessitated making changes to hcode_image_build (HIB) API as well. Note that the calling codes of xip_customize and HIB need to be updated to supply the additional args in their APIs. Note that this code stage 1 will work for Nimbus DD2 with Gptr rings in Mvpd, and no Gptr rings in the HW image. It will, however, not work if there's content in .overlays or if there's Gptr rings already in the .rings section. Thus, the stage 1 code here will work with a DD2 image (i.e., that does NOT have Gptr rings in .rings in HW image) as long as noone has put any real Gptr initfiles in for processing (which would result in ring content in .overlays). We must ensure that the stage 2 code of xip_customize gets merged on the HB side to enable processing of .overlays content before we actually add any Gptr initfiles for the .overlays section into EKB. Change-Id: I3d6ab8a9add239c92819613dcae21ef5faf0a1c5 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40591 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Sumit Kumar <sumit_kumar@in.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40898 Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Tested-by: Dean Sanner <dsanner@us.ibm.com>
* Set SYSTEM_RESCLK_DISABLE as workaroundCorey Swenson2017-06-301-0/+4
| | | | | | | | | | Change-Id: I4c8c7b5fd4e9e12919110922a77223bf0eec1696 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42620 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Call pm_init with the RESET flag for all proc during MPIPLcrgeddes2017-05-181-4/+18
| | | | | | | | | | | | | | | | | During istep 15 we set up a bunch of stuff for the PM complex. We ran into issues during MPIPL where the PGPE wasn't getting reset. Adding in this PM_RESET during istep 15 to put the PGPE into a safe state Change-Id: Ifeac1d5be0574cdff13a2ad039b9ce7b27e3b863 CQ: SW388687 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40577 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Sign and Verify the HCODE partitionMike Baiocchi2017-05-151-1/+46
| | | | | | | | | | | | Change-Id: If594c350ed52ee6b40a5aa9e021c8e5ede8fb8aa RTC:51086 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40294 Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* p9_pstate_param_blk: Define VFRT table and initialize the dataPrasad Bg Ranganath2017-04-221-2/+2
| | | | | | | | | | | | | | | | | | | | Change-Id: If517d23014f40bc3f07563fc4009ff25b59f7745 RTC:167141 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/36131 Dev-Ready: Gregory S. Still <stillgs@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Gregory S. Still <stillgs@us.ibm.com> Reviewed-by: AMIT KUMAR <akumar3@us.ibm.com> Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com> Reviewed-by: Matt K. Light <mklight@us.ibm.com> Reviewed-by: Prem Shanker Jha <premjha2@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38209 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
* Set HDAT ranges to match HOMER/OCC attributesCorey Swenson2017-04-101-0/+9
| | | | | | | | | | | Change-Id: Idff2818997488fc6378907c9ddfb56892c2608b3 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38647 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support ring overrides for HCODE imageDan Crowell2017-01-251-6/+21
| | | | | | | | | | | | | | | Allows data from the RINGOVD partition of PNOR to be applied to the HCODE/STOP image that is generated during boot and at runtime. Change-Id: I66665bb89af020fc1a249d89f42d541a06383309 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35128 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* memset the HOMER to 0's before populating it for the MPIPL flowcrgeddes2016-12-211-0/+3
| | | | | | | | | | | | | | | | | During the MPIPL path we were hitting an issue where the HWP was expecting the HOMER to be all zeros. This change zeros out the memory buffer before we pass it into the HWP RTC:166436 Change-Id: If0543d366b3d942c5283ad41e0e250a56692150d Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/34104 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Prem Shanker Jha <premjha2@in.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Fixes for STOP cycle on HWDean Sanner2016-12-121-24/+40
| | | | | | | | | | | | | - Fix cumulative OR'ing of thread into PIR - Make core SPR state save aware of fused mode Change-Id: I3d9dd0a13ecabdc5a0da6267e1741528490d1701 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/32660 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Minor updates to get istep 15/16 working with latest HCODE imageDean Sanner2016-12-121-3/+3
| | | | | | | | | | | | | Bump SBE deadman timer to 1 sec Increase max seeprom buffer Change-Id: Id413830f3e6f6145ef4e36b947543e0b67b3e8e9 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/33431 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Change HOMER logic to use offset instead of addressDan Crowell2016-11-281-4/+3
| | | | | | | | | | | | | | | | | Due to the changes in the P9 memory map, we can no longer assume that address zero exists as we're booting. These changes modify the logic related to assigning memory space for the HOMER to use an offset from the local HRMOR instead of assuming a zero base. Change-Id: If03c236ef9f2ddfee2dfd03337d6b202a5eb347d Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/32317 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* PM: Customization of CME and SGPE rings in HOMER.Prem Shanker Jha2016-11-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Extracts rings from hardware image and VPD and stashes in to a temp buffer using HWP p9_xip_customize. Subsequently, using TOR API creates a fresh and leaner layout of scan rings in HOMER. - Implements a debug infrastructure to verify the scan ring layout in HOMER. - Implemented scan ring overrides for core common and cache common rings. - Introduces size check for various sections of HOMER. Change-Id: I8d7785f632823c31077bd4f320c453129be4ef0c RTC:157954 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/27697 Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Michael S. Floyd <mfloyd@us.ibm.com> Dev-Ready: Michael S. Floyd <mfloyd@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/27699 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Change HCODE image build to use ATTR instead of scomDean Sanner2016-11-011-10/+3
| | | | | | | | | | | | | | | | | | Remove HW dependancy in p9_hcode_image_build and use ATTR instead Change-Id: I97e9641af2e2f73e5691a975ed885496f89b941e Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/31593 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Prem Shanker Jha <premjha2@in.ibm.com> Reviewed-by: Gregory S. Still <stillgs@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/31594 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Changes for P9 SBE - Clean-up work from EKB/HWP MAX_RING_BUF_SIZEMarty Gloff2016-10-171-4/+4
| | | | | | | | | | | | | Stop using FIXED_RING_BUF_SIZE, but instead use MAX_RING_BUF_SIZE. Change-Id: I84022645fcc9d43d5eb0c6a087cd2b6ffd671700 RTC:161050 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/31269 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Richard J. Knight <rjknight@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Multi-Proc Interrupt Support with Remote LSIsBill Hoffa2016-10-071-2/+2
| | | | | | | | | | | Change-Id: I8a981628cd3adc54ba581deb0ce8afb183febef3 RTC: 150562 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/29719 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update pnor section names WINK -> HCODE and PAYLOAD -> POWERVMcrgeddes2016-08-041-1/+1
| | | | | | | | | | | Change-Id: I66cc8a060f0eb7b50275a42970661247d2916035 RTC:154286 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/27228 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Updates for building host stop imageBill Hoffa2016-06-211-18/+18
| | | | | | | | | | | Change-Id: Iff457224696be3f99e44ca7ac896fe3ff1957e3e RTC: 155196 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/25857 Tested-by: Jenkins Server Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Remove usage of Obsolete p9_image_help_base.HBill Hoffa2016-06-091-1/+1
| | | | | | | | | | Change-Id: I927047362cc9077307f5cd79283de89e98a9d7af Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/25452 Tested-by: Jenkins Server Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Martin Peschke <mpeschke@de.ibm.com> Tested-by: FSP CI Jenkins Reviewed-by: Matthew A. Ploetz <maploetz@us.ibm.com>
* Enable hcode_image_build HWPs in istep 15.1crgeddes2016-03-291-56/+18
| | | | | | | | | | | | | | | Note that this requires a back build of b0323b_1614.910 or greater to get the new hw image Change-Id: Ic7b1f2b9c9baa4416d8c2c264be2878b30c610de RTC: 133832 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/22479 Tested-by: Jenkins Server Reviewed-by: Andrew J. Geissler <andrewg@us.ibm.com> Tested-by: FSP CI Jenkins Reviewed-by: Matt Derksen <v2cibmd@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Matthew A. Ploetz <maploetz@us.ibm.com>
* Integrate HWPs for step 15crgeddes2016-03-171-0/+594
This commit includes work to create the call_HWP wrappers for istep15. RTC:133832 Change-Id: Ib0db5ac2b9b5d5f5c2967ff97794493d867fb04b Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/774 Reviewed-by: A. P. Williams III <iawillia@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Richard J. Knight <rjknight@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server Tested-by: FSP CI Jenkins
OpenPOWER on IntegriCloud