summaryrefslogtreecommitdiffstats
path: root/src/include
Commit message (Collapse)AuthorAgeFilesLines
...
* Support openpower-specific I2C device calloutsJaymes Wilks2018-11-123-4/+173
| | | | | | | | | | | | | | | | | | | | | This change supports the openpower path for adding I2C device callouts to error logs. The process works as follows: - Create an I2C device lookup table on first use of I2C callout - Use that table to map I2C info to the actual device to callout - Callout any other I2C devices on the bus with lesser priority - If no I2C match found, callout the I2C master instead - If an I2C device was found, callout the I2C master as low Change-Id: Ib7b248ae60e7e834d6165bbdf4bd9b776ea2421b RTC:94872 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64833 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Deconfig parent rollup simplifiedMatt Derksen2018-11-092-2/+45
| | | | | | | | | | | | | | | Create a common deconfiguration rollup to parent. A new attribute was created to indicate when to stop rolling up the parent branch Change-Id: I80954081527f29bc466622d30644115a96be385f RTC:193268 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66444 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support fapi2 MMIO functionsMatt Derksen2018-11-092-0/+167
| | | | | | | | | | | | | | | | | | There will be a new set of interfaces in fapi2 to perform mmio (aka inband) operations directly. This is needed for OCMB access in the memory HWPs, specifically as part of the command/response protocol. Change-Id: If473e8e53fa6f76a05ad897e150b58075c769902 RTC:191344 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66045 Reviewed-by: Richard Ward <rward15@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Inband MMIO access to OCMB (skeleton)Rick Ward2018-11-092-0/+83
| | | | | | | | | | | | | | | | This is a skeleton version of the new MMIO device driver that will give access to the OCMB. It is being pushed to allow related development to progress. Change-Id: Iefec0677e63db6af29d81389c630584ba9dff16c RTC: 189447 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68489 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Extend multicast workaround and add testsCorey Swenson2018-11-092-1/+6
| | | | | | | | | | | | | | | | | - Add support for multicast OR op type - Add xscom and scom multicast tests - Avoid false fails by not setting multicast bit in bad address tests Change-Id: I32ea5b1b68a1a2f0d92c2b82b5ab1b932ddb54af RTC:198114 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65778 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support flag parameter for addBusCalloutAlpana Kumari2018-11-081-0/+18
| | | | | | | | | | | | | | | | | | Adding a new parameter flag_t to indicate the SMP link is down flag_t -> FLAG_LINK_DOWN set this link state as OFF flag_t -> FLAG_NONE no action needed Also, all these parameters of AddBusCallout, making it as structure so that in future if any parameter needs to be added/removed can be done independently. Change-Id: I4b5a4b9266326430a485a914929f0405f9fec623 CQ: SW448379 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68042 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SMF: Port NVRAM Reading Logic From SkibootIlya Smirnov2018-11-076-0/+262
| | | | | | | | | | | | | | | | | | | | As part of SMF secure memory distribution, we need to be able to read the size of secure memory from NVRAM PNOR partition (for OpenPOWER). The functionality to read (index into) NVRAM already exists in skiboot. This commits ports the bare minimum functionality required to read NVRAM from skiboot to hb. Change-Id: I17b9014ec3df590bcd8745ae70e0f96e36580117 RTC: 192411 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67414 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Enable IPMI errl after targeting is initializedCorey Swenson2018-11-051-0/+6
| | | | | | | | | | | | | | | | | A recent change split IPMI into base and extended. Move the enable of IPMI errl from base to extended to avoid targeting errors. Change-Id: Ia833dd8178ff407dff1fa514b32468c5fc70e945 CQ:SW450286 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68265 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: ANDREW R. JEFFERY <andrewrj@au1.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Allow stopIPL to be called before istepdispatcher is loadedMatt Derksen2018-11-022-8/+19
| | | | | | | | | | | | | | | Hostboot was crashing because a graceful shutdown was requested before libistepdisp.so loaded. Change-Id: Id9206961bcbb72094ff359f26db720b92480f5fb CQ: SW445973 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68110 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* PRD: Make room for Axone prf files in HBRTZane Shelley2018-10-311-2/+2
| | | | | | | | | | | | | Change-Id: Id4c742e1fd9d7925d5ee8a7451893e27c5501a4f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68168 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
* Adds NVDIMM IPL Support on ZZTsung Yeung2018-10-304-0/+88
| | | | | | | | | | | | | | | -New NVDIMM functions to support restore and trigger setup -Includes NVDIMM step in call_mss_power_cleanup after mss_power_cleanup HWP -Fixes attribute NV_STATUS_FLAG to match HDAT spec Change-Id: I2d68123ceb0b8e7a33b54f9acad0968670a67ea9 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63948 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Added support for recursive mutexesMatt Raybuck2018-10-291-8/+56
| | | | | | | | | | | | | | | | There was only support for non-recursive mutexes. This commit adds support for recursive mutexes and a new API for using them. Change-Id: I664c181af1633b05b8b2da6b1ff21b93a37cec28 RTC: 196793 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67938 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Send Attn chip list for monitoringMatt Derksen2018-10-232-1/+19
| | | | | | | | | | | | | | | | | Need to let ATTN know that they need to start monitoring non-primary processors and centaurs after we determine they are functional. Change-Id: Ia33ddc87a94c0ca972accb2d6078c2f9f2e7bd2c CQ: SW446697 CMVC-Prereq: 1070543 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66717 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add lib_isteps_mss.so as an istep 15 dependencyNick Bofferding2018-10-191-0/+1
| | | | | | | | | | | | | | | | Added the lib_isteps_mss.so as an istep 15 dependency so that if IPL attention checking finds a DMI channel fail to analyze, that it won't fail when attempting to call mss::c_str in the HWPs. Change-Id: I56594b042f5ff881a1b7b0c7545f1ada2f5f8a60 CQ: SW448718 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67671 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Thi N. Tran <thi@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Elevate log levels for simics during PSU opsChristian Geddes2018-10-181-1/+37
| | | | | | | | | | | | | | | | | | | | This commit introduces some new magic instructions one which will temporarily elevate the log levels for given components and another which will start and stop collection of these simics logs. This was added so we can temporarily increase log levels during PSU operations in hopes of catching a timeout we have been seeing in simics and getting more info for the simics teams. Change-Id: I990a4b5413f7ff14796dee36e39199f785aef458 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67359 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Hieu C. Nguyen <hieu.nguyen@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Serialize all attribute synchronization callsNick Bofferding2018-10-173-26/+78
| | | | | | | | | | | | | | | Forces all FSP attribute synchronizations down to FSP to serialize in the attribute resource provider attribute synchronization daemon thread to avoid concurrenty problems. Change-Id: Ifb355ba6f42872465ea3d6f0d9009cfd6f768d7a CQ: SW448280 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67450 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Wrap TS_ macros in {} to avoid strange IF statement behaviorChristian Geddes2018-10-161-9/+9
| | | | | | | | | | | | | | | | | | | | The TS_ macros will replace the macro with multiple lines of code. So if you put a TS_FAIL in an if statement that was not enclosed in {} you could get strange/unexpected behavior. This addes an extra layer of protection to ensure that the macro is enclosed in its own execution block. Change-Id: I226ccef81095cf8511b30e147e59d1da4904cd5c Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67373 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Thi N. Tran <thi@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* genPnorImages: Add VERSION to signed partitionsSamuel Mendoza-Jonas2018-10-161-0/+19
| | | | | | | | | | | | | | | | | Mark VERSION as a signed partition and also check for it in the IPMI FRU setup. Change-Id: I6e8690c4f34d1f5ce92750960e6c73afcbf0a8e9 CQ:SW416159 Signed-off-by: Samuel Mendoza-Jonas <sjonas@au1.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/61439 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* sio: Add test for availabilityAndrew Jeffery2018-10-151-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some components can continue to operate in the face of the SuperIO controller being unavailable on the LPC bus (specifically, the UART and boot flag processing). Other components require it present (AST-based SFC implementations and the AST mailbox). Components in the latter category can just fail with an errl when they attempt to access the controller, but for those in the former category we add an isAvailable() function in the SIO namespace to sidestep dealing with errors. Specifically, isAvailable() tests for the expected error when the SuperIO controller is disabled, and returns an errlHndl_t if any other error occurs. This way true LPC errors are propagated to the caller to commit as desired. For the moment *all* errors produced by the SIO::isAvailable() LPC bus access will result in the SIO code assuming the device is absent. We should be more precise about this, but the hardware behaviour seen under hostboot currently prevents us from being more specific. This problem is highlighted by a FIXME block in the implementation of SIO::isAvailable(). Change-Id: Id30a09b48586d2054e0cdae625ee23df68ac2aa3 Signed-off-by: Andrew Jeffery <andrewrj@au1.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67460 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Revert "sio: Add test for availability - LPC error tweak"Andrew Jeffery2018-10-152-16/+1
| | | | | | | | | | | | | | | | | | This reverts commit 627379aeaa27e30d66ebb0aecf218708d465162c, which incorrectly attempted to account for LPC errors during testing for SIO absence. The broken patch interprets the OPBM status as LPCHC status and expects an LPCHC SYNC Abnormal error, however as it's the OPBM status that indicates the error we never hit the LPCHC error path to populate the errl with the error RC expected by the SIO driver. Change-Id: Ib993d4a2b9b4e5018d9273a1c82f8b5c21ec9a25 Signed-off-by: Andrew Jeffery <andrewrj@au1.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67459 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add component IDs for PGPE and SGPE/XGPEChris Cain2018-10-141-1/+17
| | | | | | | | | | | | | | Change-Id: I7ab08671e17a6c674eb394515234a28770449859 RTC: 197064 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67375 Reviewed-by: William A. Bryan <wilbryan@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martha Broyles <mbroyles@us.ibm.com> Reviewed-by: Sheldon Bailey <baileysh@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Close windows where Hostboot HRMOR is not available to FSPNick Bofferding2018-10-121-0/+9
| | | | | | | | | | | | | | | | | | | There are certain small time windows where the core scratch register, which holds the Hostboot load address for FSP to read in order to dump Hostboot, is cleared during winkle. This change caches the Hostboot load address in a processor attribute that FSP can read/use in the event it happens to request a dump in the window where the core scratch register is not valid. Change-Id: I776df5e64f4d8ad382392662d08ee349661ba78a CQ: SW444212 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66664 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* sio: Add test for availability - LPC error tweakDan Crowell2018-10-112-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | Some components can continue to operate in the face of the SuperIO controller being unavailable on the LPC bus (specifically, the UART and boot flag processing). Other components require it present (AST-based SFC implementations and the AST mailbox). Components in the latter category can just fail with an errl when they attempt to access the controller, but for those in the former category we add an isAvailable() function in the SIO namespace to sidestep dealing with errors. Specifically, isAvailable() tests for the expected error when the SuperIO controller is disabled, and returns an errlHndl_t if any other error occurs. This way true LPC errors are propagated to the caller to commit as desired. Change-Id: Ib94ceabfd4f4e9c63c114cfe3db3c954dbb6d6e5 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67315 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: ANDREW R. JEFFERY <andrewrj@au1.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* pnor: Introduce an IPMI-based PNOR driver implementationAndrew Jeffery2018-10-102-2/+12
| | | | | | | | | | | | | | | | | | Similar to the AST MBOX implementation, the IPMI PNOR implementation negotiates the layout of the LPC FW space with the BMC, but using IPMI rather than the AST mailbox as a protocol transport. The same protocol is still used and has simply been adapted to the new interface. Note that currently the change of transport has had a 2-3x impact on boot performance. Optimisation is an ongoing effort. Change-Id: I7f838f5b5e88ac877a725386a33df58ee5e7213c Signed-off-by: Andrew Jeffery <andrewrj@au1.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65942 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Cleanup to Runtime SCOM RCsDan Crowell2018-10-091-16/+20
| | | | | | | | | | | | | | | Standardized a few more constants and cleaned up some comments and FFDC to be more obvious Change-Id: Ifd387123573d75002e2194037636a44702b705d2 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66616 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Richard Ward <rward15@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* ipmi: Terminate SEL task via shutdown eventAndrew Jeffery2018-10-092-7/+4
| | | | | | | | | | | | | | | | | | | | The IpmiSEL task will become part of the extended image once the IPMI module is split in two. Once split, if we need to handle an early shutdown we cannot be referencing code from HBI in HBB. To that end, ensure we don't instantiate an IpmiSEL via Singleton in an attempt to shutdown its event loop when it hasn't been loaded, let alone started. Instead, have IpmiSEL register itself in the shutdown handler, and shut down the SEL task before IpmiRP. Change-Id: I358f6cb1f5528a4ad72c93477ad883cad19e2bf6 Signed-off-by: Andrew Jeffery <andrewrj@au1.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67076 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* ipmi: Introduce register_for_event() interfaceAndrew Jeffery2018-10-081-0/+9
| | | | | | | | | | | | | | | register_for_event() allows the IPMI PNOR implementation to indicate interest in SELs from the hiomap protocol used for managing the LPC FW space. Change-Id: I3bf6cb7f860d41a0c46755e23fd54276ae2258ff Signed-off-by: Andrew Jeffery <andrewrj@au1.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65938 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SMP wrap mode - Run host_load_io_ppe earlier in Wrap mode.Thi Tran2018-10-031-0/+1
| | | | | | | | | | | | | | This is done in order to avoid an error if the PPE code isn't loaded when we attempt to start the PPE. CQ:SW446328 Change-Id: I32f5ae0c617cf4d29dd6a6744158febe7b05e9da Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66885 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* assert: Include file name in assert outputAndrew Jeffery2018-10-021-5/+6
| | | | | | | | | | | | | | | Printing the line number without an associated file is almost meaningless; add the file name to improve debug ergonomics. Change-Id: I454876ccc567cb58066362caced7efbaf92cfe62 Signed-off-by: Andrew Jeffery <andrewrj@au1.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66117 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add consistent enter-exit traces for all runtime interfacesDan Crowell2018-10-021-0/+2
| | | | | | | | | | | | | | | | | | Created a new 'HBRT' trace buffer that is exclusively used to bound the external calls into our runtime image. Modified the return code values to be the reasoncode of the error log we commit instead of a generic '-1' value that is not very helpful. Change-Id: Id41288ea1903bf6d11e967fcb10a8184153943c8 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64871 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Shutdown: Move attribute sync to shutdown handlerNick Bofferding2018-10-014-21/+121
| | | | | | | | | | | | | | | Moved synching attributes into an attribute resource provider shutdown path to avoid race conditions along the shutdown path where a normal error path coupled with parallel shutdown leads to FSP attribute sync errors. Change-Id: Ibdb828f8132da1e251f880ef0e7d4fea2e4619a3 CQ: SW443737 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66431 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Trusted Boot: When TPM not detected properly, report errors if TPM is requiredNick Bofferding2018-10-012-9/+34
| | | | | | | | | | | | | | | | | When the MRW for a machine defines a possible enabled TPM, and the "TPM Required" policy is "Required", then it is expected the TPM will be detected as present. If that is not the case, surface the detection failure as a visible error log, and generate another visible log indicating that a TPM expected to be present was not detected correctly. Change-Id: Icbfca04beaa6fdece147cc24f4e0615b5856a830 CQ: SW444532 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66422 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Correctly handle psu FFDC on OpenPower SystemsChristian Geddes2018-09-271-24/+0
| | | | | | | | | | | | | | | | | | | | | | | Prior to this change, there was a switch statement that was saying "if this RC is found in the psu FFDC, then do this recovery action" that is obviously not very easy to maintain because for every error we need to add the proper action. Instead of this, now we will just look if any GARD records were created as part of the error found in the FFDC. If a gard was found , Hostboot will stop trying to recover the SBE and instead enter a reconfig loop to try and IPL w/ the target garded out. Again this only applies to OP system, in the FSP world we will commit the error logs w/ the gard records and then TI telling HWSV they need to look at the SBE Change-Id: I04e03feebf2bbd1eae2d725bee31993062fe7c94 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66374 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Attribute cleanupDan Crowell2018-09-271-9/+0
| | | | | | | | | | | | | | | | | | | | | | | Added mrwHide to a lot of platInit attributes, this will prevent them from showing up in the ServerWiz tool where the value will be hard to change. Instead these will always rely on the default in the xml or explicit platform code to set. Also removed a bunch of unused tags to clean things up. Change-Id: Id237924d737392368c418cc31d6506f1f5598b98 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64233 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Joseph J. McGill <jmcgill@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66015 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* PRD: Updates for PM ffdc parserBenjamin Weisenbeck2018-09-261-4/+5
| | | | | | | | | | | | | | | CQ: SW444956 Backport: release-fips922 Change-Id: Ie79eb21ae8173fb4ed699683e5187c51bdd4cb39 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66138 Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66642 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
* Support HB running in SMFDean Sanner2018-09-249-41/+105
| | | | | | | | | | | | | | | | | | | | | | Support SMF for P9N/P9C. Lots of minor tweaks to make this work, but the biggest is to run userspace in problem state This is needed because for SMF Hostboot will need to run in S=1, HV=0,PR=1 (and kernel in S=1, HV=1, PR=0) This commit makes P9 HB userpsace run in HV=0 PR=1 and kernel in HV=1, PR=0. Change-Id: Ia4771df5e8858c6b7ae54b0746e62b283afb4bc4 RTC: 197243 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/50530 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support fapi2 i2c functionsMatt Derksen2018-09-204-21/+185
| | | | | | | | | | | | | | | | | New interface in fapi2 to perform i2c operations directly. This is needed for OCMB access before we get OMI bus running, specifically as part of a cmd/rsp protocol. Change-Id: I8b778f12f8c0c6820ceb51146f1e21d30891c964 RTC:197029 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63919 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Ignore wakeup failures on checkstopped coresDan Crowell2018-09-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | If a core (unit)checkstops, PHYP no longer allows wakeup operations to take place. However, HBRT has generic logic that always does a wakeup before doing any ec/ex/eq scom at runtime. Since PRD needs to do those scoms to analyze the checkstop we have a problem. The change here is for HBRT to handle a new return code from PHYP that indicates this situation. This RC will be treated as a success, thus allowing the subsequent scom operation to pass. Change-Id: I4ac62129399db50f48c938b649994423c99622a5 CQ: SW444076 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66143 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Forcibly clear all previous wakeups when the PM Complex startsDan Crowell2018-09-193-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | The power management logic was designed with the assumption that the external callers would manage the state machine such that the order of operations is always: load->start->reset->load->start->reset->etc. However, we have discovered edge cases where a reset can happen before the first load or after a previous reset. In either case we will end up with our wakeup counter being off by one and thus never releasing wakeup. The solution is to add logic to the start path that will explicitly clear the counter out completely, regardless of its current value. This will ensure that wakeup is released once the complex is alive. Change-Id: Ifb436335090ff910b9ee0f083d9a550b81833287 CQ: SW442639 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65518 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add OCMB_CHIP and MEM_PORT fapi2 test casesChristian Geddes2018-09-181-47/+14
| | | | | | | | | | | | | | | | | | | | This commit adds test cases for new OCMB_CHIP and MEM_PORT target types that are being added to support the new explorer memory buffer used in Axone. Also this commit fixed up the Axone target generation which was missing a break on the inner loop and removed some changes that were made in target.H which was allowing invalid parets to be looked up for dimm targets. RTC: 172970 Change-Id: I7564fbcfcdde2177ece934015fe40c79011f559f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65511 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update fapi2 tests cases with Axone targetsChristian Geddes2018-09-181-20/+0
| | | | | | | | | | | | | | | | | This commit will add new fapi2 tests case to make sure that the new MCC, OMI, and OMIC target types work correctly. Also in this commit I realized how much of a pain adding new targets can be for these tests so I added some macros to reduce the amount of changes required for some of the tests when new targets get added Change-Id: I5879c23dcd756686e369b1f81e58d56b73b1607f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65204 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Clear out HOMER attributes and reset PM in PHYP modeDan Crowell2018-09-181-2/+15
| | | | | | | | | | | | | | | | | | | | During the IPL, Hostboot will initialize part of the PM Complex and setup the HOMER memory spaces. At runtime, PHYP will reinit the complex with its own memory spaces. This change explicitly resets the complex and clears any related HOMER attributes before jumping to PHYP so that the first call at runtime starts completely fresh. Change-Id: I540b79143d5fbba876ffc0ac72721639153a1cfa CQ: SW444669 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65983 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Targeting support for NVDIMM-N P9 on ZZTsung Yeung2018-09-184-2/+161
| | | | | | | | | | | | | | | | | (Redo from previous change https://ralgit01.raleigh.ibm.com/gerrit1/#/c/56096/) -Added interfaces for accessing NVDIMM via I2C -Added attributes to support NV controller on NVDIMM -Moved all attributes to common file Change-Id: Ief68d9d5e0aaadfa017b4fe117bdb3e29739e772 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/59995 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Additional tracing for shutdown eventsMatt Derksen2018-09-121-1/+4
| | | | | | | | | | | | | | | | | Hit an issue where a shutdown was called but all that is traced is a msgQ pointer. These traces should help associate the msgQ pointer to an actual task being shutdown. Change-Id: Ic22fdde1a146eec90f26d557e8af1ddec3c85c4e CQ:SW443508 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65464 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add VERSION to all OpenPOWER error logsMatt Raybuck2018-09-071-0/+8
| | | | | | | | | | | | | | | | | | | When an error log is created for OpenPOWER systems it didn't contain the VERSION info within it. This commit adds a function called AddVersionInfo() that appends the VERSION info to every error log for OpenPOWER. Change-Id: Ic259e10e942f6df0675055823e4945ef9696b659 RTC: 196794 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65506 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Port System and Node Targets Stitching CodeIlya Smirnov2018-09-055-2/+288
| | | | | | | | | | | | | | | | | | | | HBRT's targeting doesn't map the System target to its nodes correctly because the target stitching code, that already exists on FSP, is not present in HBRT. This change ports the abovementioned code to HBRT, so that the system and node targets are correctly associated to each other at the end of targeting init. Note that unstitching is required during MPIPL to break the links between sys <-> node because only one node on which hb is running is visible during the boot. Change-Id: I9731144c480b3357ff7b4aff02d13623a1119dac CQ: SW432119 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65494 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Check capability bit before using wakeup for OPAL in OpenPOWERDan Crowell2018-09-052-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | A recent change switched out special wakeup handling over to use the host interface instead of the internal HWP calls. However, we just discovered that the opal-prd application was not allowing those calls on non-FSP systems. The opal-prd code is being updated, but since that is delivered as part of the Linux distro (not firmware) we need to handle the situation where newer Hostboot is running on top of the older opal-prd. This commit adds a check for a new OPAL-specific capability bit that will ensure we only use the wakeup interface if the opal-prd hosting us supports it. Change-Id: Ib9b99a4549a023d466572c19c2f7208e1c26d8f8 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65208 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Update PG detection for new Axone memory targetsChristian Geddes2018-09-051-2/+7
| | | | | | | | | | | | | | | Add support for presence detection of new OMI, OMIC, and MCC targets. Detection is done by looking at the MC01, and MC23 PG data. Change-Id: I2706bb28f64df653546ce22451e690507be09d8e RTC: 197541 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64966 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Update VPD in correct node at runtimeNick Bofferding2018-09-051-1/+1
| | | | | | | | | | | | | | | Fixes VPD writes in runtime code to include the node HUID of the target whose VPD is to be written in the communication to FSP so that FSP can apply the update to the VPD within the correct node Change-Id: Ic0801450e312714e80f067b4817b4d06d8236f0c CQ: SW444403 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/65615 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
* Deconfig EC/EX/EQ at runtimeRoland Veloz2018-08-302-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Applied the normal parent/child rules for EC/EX/EQ logic to be done in the runtime deconfig logic. After applying the deconfig logic, then reset the PM for the parent proc of the EX/EX/EQ. To facilitate the code changes, modified the return value of the TARGETING::getParent(...) call. It no longer returns a const * Target, considering 5 times out of 7 of it's usage, users were just staic_cast(ing) away the const. Clear out the HB reset attribute in the mpipl path. Modify PRD logic to use runtime deconfig call in malfunction alert path. CMVC-Prereq: 1066157 Change-Id: If81f2f15c6e84bf2adb6fd66c1321b8f1ddf1a86 CQ: SW443157 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64873 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
OpenPOWER on IntegriCloud