summaryrefslogtreecommitdiffstats
path: root/src/include/usr/isteps/istep_reasoncodes.H
Commit message (Collapse)AuthorAgeFilesLines
* Only compare a proc's omi freq if it has functional OCMB childrenChristian Geddes2019-08-091-4/+2
| | | | | | | | | | | | | | | | | | There are checks we do during the memory intialization where we check to make sure that both processors have the same frequence set for their OMI traffic. If a processor has no OCMB targets then its OMI frequence will not get set so we should ignore those processors for this comparison. Change-Id: Id00f01756b431695e92a15872ebe00fd18306c4f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81462 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
* Handle processor swap between slots to 1-socket systemDan Crowell2019-08-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | If a processor was booted in the second slot, it will be programmed to use the memory for that slot. When it is installed in the first slot it will then get reprogrammed to use the data for slot0. However, if the new system only contains data for that 1 slot, we won't be able to find a match to do the initial part of the boot. This change will force some values into good enough shape to get the boot far enough to do the SBE update to reprogram the memory map. Change-Id: I9b88d4181272104a8c680e9b5e84c4d204fdea05 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80680 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
* Force sbe update loop if a change in OMI freq is detectedChristian Geddes2019-07-171-0/+2
| | | | | | | | | | | | | | After we parse the SPD to determine correct frequency settings we need to check if the optimal settings found differ from the original settings we booted with. This commit adds a check for OMI frequency changes in addition to the existing nest frequency and mc sync mode checks. Change-Id: Icaf64eda225df3aab82a033866663e3103cef55f RTC: 207596 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78739 Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com> Tested-by: Daniel M Crowell <dcrowell@us.ibm.com>
* SMF: Logic For Creating Non-Secure HOMER Memory SpaceIlya Smirnov2019-04-121-0/+2
| | | | | | | | | | | | | | | | | | | For SMF to be enabled, HOMER requires a small amount of non-SMF (unsecure) memory where the "jump to Ultravisor" instruction can be put (to transition to UV mode). This commit sets up a region of non-secure memory space for that purpose. Change-Id: Ib91ec69f49a4e174e65f3c2aad337a68eaa0803b RTC: 205986 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70699 Reviewed-by: Prem Shanker Jha <premjha2@in.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* UCD flash update invokerNick Bofferding2019-03-201-0/+2
| | | | | | | | | | | | | | | | | | Implements the main algorithm for finding applicable UCDs to perform flash update on and walking the UCD flash image table of contents to find the image associated with a UCD. Also adds a check to skip the update if simics is running. RTC: 201991 Change-Id: Ib35abec2f0a2ed22ae8d41a2acecd146f699bc43 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73484 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Enable mss_scrub on MPIPL if NVDIMM is configuredTsung Yeung2019-02-191-0/+1
| | | | | | | | | | | | | | | | NVDIMM restore blows away the scrub settings so it needs to be reinitialized during MPIPL Change-Id: I67f74c71e98b8907351eb7477bf197a941aefb8d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71786 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com> Reviewed-by: TSUNG K. YEUNG <tyeung@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Do not gard cores on the initial core wakeup failureDan Crowell2019-01-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | We have seen rare (but non-zero) errors during slave core wakeup where we never see the new core reporting in. Currently this will result in a visible log and a core gard. However, there is currently no indication this failure is actually due to bad hardware. As a workaround, this commit adds an indicator that keeps track of if a core has failed wakeup previously. The first time we encounter the error there will be a visible log with a FW callout and no deconfig or gard of the core. That will trigger a boot failure and a reboot. If we don't fail on the next boot (which is expected), the counter will be cleared. If we do fail again there will be a visible log (with a new SRC) that calls out the core as the primary cause, plus does a deconfig+gard. Change-Id: I3a25537cf9c9c8e0b679519b67e9ae4e3492736d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70992 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Generate error when pnor is not accessed via ipmiCorey Swenson2019-01-141-1/+2
| | | | | | | | | Change-Id: Ia44001c45dbe5a0f4f51202136d2649bb365d73f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69585 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Enable PCIe slot bifurcation using HX keywordRichard J. Knight2018-12-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | -Update the PCIe config code to check the contents of the HX keyword attribute when determining the lane configuration. The HX keyword was defined to describe the lane configuration for a specific PCIe slot. It is generally stored in the VPD data of a PCIe card where it is read by the FSP. If the HX keyword data is populated, the FSP will then update the PEC_PCIE_HX_KEYWORD_DATA attribute for the PCIe slot the card is installed in. Once hostboot reads the HX keyword it will determine the correct lane configuration and adjust the IOP configuration attributes for the hardware procedure, p9_pcie_scominit, to consume. Change-Id: I10b1fcc84aacf3caf835e3cc9fffd1350cd30935 RTC:189286 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/59113 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support HB running in SMFDean Sanner2018-09-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | Support SMF for P9N/P9C. Lots of minor tweaks to make this work, but the biggest is to run userspace in problem state This is needed because for SMF Hostboot will need to run in S=1, HV=0,PR=1 (and kernel in S=1, HV=1, PR=0) This commit makes P9 HB userpsace run in HV=0 PR=1 and kernel in HV=1, PR=0. Change-Id: Ia4771df5e8858c6b7ae54b0746e62b283afb4bc4 RTC: 197243 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/50530 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* p9_fab_iovalid: process errors returned by this HWPPrachi Gupta2018-08-021-0/+2
| | | | | | | | | | | | | | | | | | | When partial links fail to train, this procedure will return a vector of RCs. This commit adds in code to process those errors and add appropriate BUS callouts CQ:SW439810 Change-Id: Ie3465bbac2736dbcc20c9cf9a71e7c91ee618335 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/63506 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* In non-MNFG, only match SBE keys for the sides that bootJaymes Wilks2018-06-281-1/+3
| | | | | | | | | | | | | | | | | | | FSP was not IPL'ing from SBE side 1 when production key is corrupt in SEEPROM of SBE side 0 (due to the key mismatch check). This change gets around that by only matching SBE keys for the sides that booted in non-MNFG case. Change-Id: I1dfcb5c7f7e281125fdbcfc8b8f3a84747c90f59 CQ:SW420430 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/60571 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* missing memory: istep 7 and 14 changesPrachi Gupta2018-06-061-0/+1
| | | | | | | | | | | | | | | | | | | | | There are two cases where hostboot's attention is required in istep7: - If HRMOR we booted with doesn't fall in the range of proc_mem_to_use's memory, then the SBE is old. HB will do an sbe update and request re-ipl - If HB deconfigured a bunch of dimms in istep7 and ran out of memory, then we will request a reconfig loop Then, in istep14, we added another sanity check to make sure we have memory as expected to prevent unexpected failure after exiting cache contained mode. Change-Id: I018f4ce862cc79b5d7bacbe01cc28d1d2b4fc788 CQ:SW430015 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59696 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Verify frequency attributes across nodes to match with that of master nodeSwathi Madhuri Bhattiprolu2018-05-161-0/+8
| | | | | | | | | | | | | | | | | | | | | -Existing code ensures consistency of frequency data across all modules in istep6.12. -In a multi-drawer config this data needs to be consistent across all drawers. -Master drawer sends the frequency data to all the other via IPC mechanism. -This data is compared and error is returned if there is a mismatch. Change-Id: Ia1daf1f0eeb90fbafb68417b979488b040efe535 RTC:158036 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57542 Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Get Final HDAT Size from PAYLOAD's SPIRA sectionMike Baiocchi2018-05-081-0/+1
| | | | | | | | | | | | | | | | | This commit retrieves the amount of space the PAYLOAD has reserved for the HDAT content in its SPIRA section. It then uses this size when copying the HDAT from the temporary location (where the FSP put it with DMAs-via-TCEs) to its final location. Change-Id: I430a78a1655db85f448b3f5c30e6a83f5be4b1f6 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58261 Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Rediscover I2C Targets after Host I2C ResetMike Baiocchi2018-05-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | It's possible that some targets that use I2C to detect if they are present might not be present after a system re-IPLs and performs a FSI I2C Reset. Therefore, later in the IPL, after a Host I2C Reset sequence an attempt to rediscover any of these targets is made. If any new targets are found, the system will re-IPL. Currently only supporting looking for DIMMs now on OpenPower systems with securemode enabled. Change-Id: I010135231f2f74869529a3dbc3344413b6d19dc9 RTC:178973 Backport:release-op920 CQ:SW427365 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57744 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Improve error handling when slave SBE fails to bootChristian Geddes2018-04-101-0/+1
| | | | | | | | | | | | | | | | If we fail to boot the slave SBE we should mark it in the istep errlog to ensure that we fail the istep and perform a reconfig loop. Change-Id: I70e67b5b3e1e35e0ee76eb1f158435ee44a436ef Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56882 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Revert "Verify frequency attributes across nodes"SWATHI M. BHATTIPROLU2018-04-091-8/+0
| | | | | | | | | | | | This reverts commit 571e1d84dfe50aaa674aa7e33abb75868b432d78. Change-Id: I8720246ef94be07ce0a37151b7209c8080320d59 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56933 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Verify frequency attributes across nodesSwathi Madhuri Bhattiprolu2018-04-051-1/+9
| | | | | | | | | | | | | | | | | | | | | | | -Existing code ensures consistency of frequency data across all modules in istep6.12. -In a multi-drawer config this data needs to be consistent across all drawers. -Master drawer sends the frequency data to all the other via IPC mechanism. -This data is compared and error is returned if there is a mismatch. Change-Id: I922d32456c9d3c4e53dae528f088dbb013c3ded9 RTC:158036 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/54825 CI-Ready: SWATHI M. BHATTIPROLU <bhmadhur@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Richard Ward <rward15@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Add in a check in the PSU error logging for SBE failureElizabeth Liner2017-12-201-13/+0
| | | | | | | | | | | | | If there is an error in the PSU, and there is no FFDC, there is probably something wrong with the SBE. Since there is new support to attempt an SBE reboot if there's an error, we want to add that functionality to the PSU flow as well. Change-Id: I8203193b49caaf640962e181a814df83c0760ff4 RTC:178801 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46641 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support Verifying and Moving PAYLOAD and HDAT when TCEs are EnabledMike Baiocchi2017-12-121-0/+1
| | | | | | | | | | | | | | | | | | | This commit makes changes in istep 16 to set up temporary memory regions that the FSP will use to DMA-via-TCEs the PAYLOAD and HDAT sections into memory in istep 20. Then in istep 21 Hostboot will verify and move these sections to the final memory locations. Change-Id: I3c9e026a8e2c3c40008364c4229915b4a661d0fe RTC:181900 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50624 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Enable ATTN prior to OPAL handoffBrian Bakke2017-11-301-0/+1
| | | | | | | | | | | | | Change-Id: Iadfded90c09b149948348ee462ab34f9c2431982 RTC: 182134 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49865 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Control Host reboots for manufacturingDean Sanner2017-11-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | In a manufacturing environment it is desired to reboot once (and only once) to get the FIRDATA analysis on checkstop. This commit adds functionality to control the auto reboot policy on the BMC. It then "remembers" the state using the HB VOLATILE PNOR partition to enable reboots when in MFG mode. Note that when in this mode, any reboot (even from host) will terminate the boot. Change-Id: If5ce133b59e10c659d7024d1ae08a40988e35190 RTC:180772 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48116 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Remove support for P9N (Nimbus) DD1.0Dean Sanner2017-11-011-0/+2
| | | | | | | | | | | | | | - Will error out during IPL - Gracefully handle removal of DD1.0 inits, tied to hw091517b.910 HCODE image Change-Id: I7b4c53b38863a8251a8c02d7df83a3ff713f52d7 CMVC-Prereq: 1034628 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46356 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Bringup memory remapping for no memory behind master processorMarty Gloff2017-10-101-1/+0
| | | | | | | | | | | | | | | | | | | | Need to remove check in HWAS to ensure there is memory for master processor. An error log was added temporarily after detecting that proc0 lacked memory behind it. This error log is being removed so that the memory remap processing can take place. Change-Id: Ia7a4ed689c8bad9f1de94f63af210a463000ad9c RTC: 149250 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42628 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* SBE failure path updates in timeout and extract RC handlersMarty Gloff2017-09-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | SBE failure paths in sbe_extract_rc_handler.C need to be updated. - Add support for getting out of the timeout loop if the SBE state is changed to DUMPING or if the async FFDC bit is set in the SBE register. - Add support to check the async FFDC bit after returning from the timout handler and detecting that the SBE is not in the RUNNING state. If the async FFDC bit is set, get and handle the SBE FFDC. Change-Id: I460a6dd81f8bbce8e92dcc19f68ec8489f38c19c RTC: 178347 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44827 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Detect lack of proc0 memory and force reboot on new config / RebootMarty Gloff2017-07-281-0/+1
| | | | | | | | | | | | | | | Implement the forced reboot with the new config. Change-Id: Id13d2ec1b280ed3d81acce25bda3b0c1aae415f3 RTC: 176068 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42397 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Block SBE updates during mpiplDzuy Nguyen2017-07-181-0/+2
| | | | | | | | | | | | | Change-Id: Ie59495404ec27d6be865063fc930e895340d9be2 RTC: 169683 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42853 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add in calls to p9_get_sbe_msg_register and handler functions (4/4)Elizabeth Liner2017-06-291-0/+1
| | | | | | | | | | | | | | | This commit adds in an additional hwp needed for the SBE conditions handling, p9_get_sbe_msg_register. This HWP pulls out the SBE register and determines if it got to runtime or not. From there there are handler functions that decide what to do next. Change-Id: I0e17b345bb983ed6373ec36ea2a6eb9b5e1bf3f1 RTC:173809 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41503 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* sbe_extract_rc_handler SBE conditions details (2/4)Elizabeth Liner2017-06-281-1/+2
| | | | | | | | | | | | | | | | This commit finalizes the different steps for each SBE condition, whether that's trying again, increasing the error to a more serious condition, or failing and garding the proc. In most instances we attempt to restart the SBE through the threshold handler. Change-Id: I1bd485557f6999a20a1a52c92f06be3df528ca8c RTC:173809 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41074 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Initial sbe_extract_rc_handler commit - basic structure (1/4)Elizabeth Liner2017-06-281-0/+9
| | | | | | | | | | | | | | | | | | This commit sets up the basic structure for the SBE extract return code handler from the HWP. It sets up attributes, error codes, the inital call to the function, the different paths for the sbe conditions and the basic finite state machine structure for the threshold handling. Change-Id: I47a07226da0d3e5a45606a496795636511d621a8 RTC:173809 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41073 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add check for minimum hardware in proc_exit_cache_containedRoland Veloz2017-06-091-0/+2
| | | | | | | | | | | | | RTC:123500 Change-Id: Iae026349cff1842c37e568059c2565cf98e14aff Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41400 Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Enforce synchronized processor security stateJaymes Wilks2017-05-101-0/+8
| | | | | | | | | | | | | | | Ensure the secure state is consistent across all processors. Change-Id: I671253b99d5d87509909681a2cec2380ca6918b0 RTC:167775 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38764 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add support for selecting WOF tablesCorey Swenson2017-04-291-0/+1
| | | | | | | | | | | Change-Id: I23cfd9b1156d44a0a3277a0c2696d034a741d0ba RTC:158589 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38724 Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Handle SMT4/SMT8 fuse bitsCorey Swenson2017-04-281-0/+1
| | | | | | | | | | | Change-Id: I8fc108877714ff76103510b7801af72a94e5aae3 RTC:160720 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39778 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Terminate IPL if no memory configured behind master procDan Crowell2017-04-211-0/+1
| | | | | | | | | | | | | | | | | | Firmware doesn't currently support booting in a configuration where there is no functional memory behind the master processor (proc0). Added an explicit check to the 'minimum hardware' logic to account for this to avoid confusing CRESP errors when this scenario shows up. Change-Id: Ia9c1e1d1cb135efb58a52edfccffe66174f57a2c CQ: SW384402 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39048 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Integrate p9_update_security_ctrl HWP into Istep 10.3Jaymes Wilks2017-03-031-0/+2
| | | | | | | | | | | | | | | | | | Add handling of TPM deconfig and SBE Secure Seeprom Lock by integrating the hardware procedure p9_update_security_ctrl into Istep 10.3 and retriggering the hardware procedure any time a TPM fails. Change-Id: I36f57dc7aef3de6661357736a525fe25a3828c6e RTC:153891 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/36189 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Verify OCC checkpoint is reached after starting PM complexCorey Swenson2017-02-031-1/+3
| | | | | | | | | | | RTC:165644 Change-Id: Id47ffd1781082d57726507372dd461080bddaecc Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35061 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Martin Gloff <mgloff@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Compute Nest Freq during 6.12 host_voltage_configAndres Lugo-Reyes2016-07-241-0/+4
| | | | | | | | | | | | | Change-Id: I8c6a8aac1a683b1b3c4defefa06ea22e3d8c564e Depends-on:I358109f01732fdb4d75409693d5a1866bcd57866 RTC:151649 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/26269 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Thi N. Tran <thi@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Andrew J. Geissler <andrewg@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Implement PM complex calls in HBRT, no HWPs - Initial InfrastructureMarty Gloff2016-06-061-24/+26
| | | | | | | | | | | | | | | Create src/usr/isteps/pm directory and runtime subdirectory. Add rt_pm.C with functions to support runtime interfaces. Add pm_common files with funtions to support runtime functions. Create and update appropriate makefiles. Change-Id: Ibdbd8890c7f134e5f687708e292543f8ce6f5d89 RTC: 148935 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/24020 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Istep 8.4 L2 procedure integrationAndrew Geissler2016-05-041-0/+2
| | | | | | | | | | | | | This code will start the slave sbe's and look for them to indicate they are at their runtime state. Change-Id: I23b493d22774e35fc1267f9902ac1bb333eed203 RTC: 134078 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/23491 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Integrate L1 HWPs for instruction startMarty Gloff2016-04-271-0/+5
| | | | | | | | | | | | | | | Move thread activate function to istep06. Change thread activate to invoke new P9 versions of HWP code. Change-Id: I556526b60c01bb137b0a6b8a086b87eff4498af8 RTC:134076 CMVC-Prereq: 989911 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/758 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Moving the payload load into istep 20.1Elizabeth Liner2016-04-211-0/+1
| | | | | | | | | | | | | | | | | In our FSP machines, the FSP loads the payload in step 20.1, but in our openpower machines we added that functionality in step 21.3. This is moving that functionality from 21.3 to 20.1 (This is a forwardport from the already-reviewed master-p8 change) Change-Id: Ide679bcda981771aad7806876a1b0c42f6f60d8f RTC:147281 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/22976 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* ISTEP08 HWP enablementMatt Derksen2016-04-041-0/+4
| | | | | | | | | | | Change-Id: Id999da8e97c0bcd5cefabdeb2fe7c80d1efbf5da RTC: 146576 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/21463 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Integrate L1 HWPs for steps 6Bill Schwartz2016-03-211-0/+2
| | | | | | | | | | | | | | | Refactor istep 6 to standard approach. depends-on: I7405fa4480213cec2290ef4e64dc9152bfc7ae1f Change-Id: Ie86c97cd4fdb1cfaeb83fa8cc63b1a34e00f79b3 RTC: 133830 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/20664 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Reviewed-by: Prachi Gupta <pragupta@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Christopher J. Engel <cjengel@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update FAPI Reasoncodes and remove HWPF Reasoncodescrgeddes2016-03-101-4/+29
| | | | | | | | | Change-Id: I7405fa4480213cec2290ef4e64dc9152bfc7ae1f Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/21851 Tested-by: Jenkins Server Reviewed-by: William H. Schwartz <whs@us.ibm.com> Tested-by: FSP CI Jenkins Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* P9 Isteps: Created directory structure for istep 14 wrappersPrachi Gupta2015-12-111-0/+50
Change-Id: Idad8c430afef013a91e0c206d4fff80fc45053c0 RTC:137652 Reviewed-on: http://gfw160.aus.stglabs.ibm.com:8080/gerrit/21501 Tested-by: Jenkins Server Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: A. Patrick Williams III <iawillia@us.ibm.com>
OpenPOWER on IntegriCloud