diff options
Diffstat (limited to 'src/usr/fapi2/test/p9_sample_procedure.C')
| -rw-r--r-- | src/usr/fapi2/test/p9_sample_procedure.C | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/src/usr/fapi2/test/p9_sample_procedure.C b/src/usr/fapi2/test/p9_sample_procedure.C new file mode 100644 index 000000000..1d4cf32e9 --- /dev/null +++ b/src/usr/fapi2/test/p9_sample_procedure.C @@ -0,0 +1,386 @@ +/* IBM_PROLOG_BEGIN_TAG */ +/* This is an automatically generated prolog. */ +/* */ +/* $Source: src/usr/fapi2/test/p9_sample_procedure.C $ */ +/* */ +/* OpenPOWER HostBoot Project */ +/* */ +/* Contributors Listed Below - COPYRIGHT 2015,2016 */ +/* [+] International Business Machines Corp. */ +/* */ +/* */ +/* Licensed under the Apache License, Version 2.0 (the "License"); */ +/* you may not use this file except in compliance with the License. */ +/* You may obtain a copy of the License at */ +/* */ +/* http://www.apache.org/licenses/LICENSE-2.0 */ +/* */ +/* Unless required by applicable law or agreed to in writing, software */ +/* distributed under the License is distributed on an "AS IS" BASIS, */ +/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ +/* implied. See the License for the specific language governing */ +/* permissions and limitations under the License. */ +/* */ +/* IBM_PROLOG_END_TAG */ +#include <cxxtest/TestSuite.H> +#include <p9_sample_procedure.H> +#include <fapi2.H> +#include <plat_attribute_service.H> + + +//------------------------------------------------------------------------------ +/// @file p9_sample_procedure.C +/// +/// @brief These procedures test FAPI_ATTR_GET, FAPI_ATTR_SET, +/// and FAPI_TRY and FAPI_ERR. This is primarily here to +/// to make sure these compile okay. +//------------------------------------------------------------------------------ + + +fapi2::ReturnCode p9_sample_procedure_proc( + fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on PROC Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, + i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on PROC Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, + i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", + l_attr_scratch, + expectedValue); + + + fapi_try_exit: + + FAPI_ERR("Exiting ..."); + + return fapi2::current_err; + +} + + +fapi2::ReturnCode p9_sample_procedure_ex( + fapi2::Target<fapi2::TARGET_TYPE_EX>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on EX Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on EX Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_eq( + fapi2::Target<fapi2::TARGET_TYPE_EQ>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on EQ Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on EQ Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_core( + fapi2::Target<fapi2::TARGET_TYPE_CORE>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on CORE Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on CORE Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + + + +fapi2::ReturnCode p9_sample_procedure_mcs( + fapi2::Target<fapi2::TARGET_TYPE_MCS>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on MCS Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on MCS Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_mca( + fapi2::Target<fapi2::TARGET_TYPE_MCA>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on MCA Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on MCA Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_mcbist( + fapi2::Target<fapi2::TARGET_TYPE_MCBIST>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on MCBIST Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on MCBIST Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_xbus( + fapi2::Target<fapi2::TARGET_TYPE_XBUS>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on XBUS Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on XBUS Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_capp( + fapi2::Target<fapi2::TARGET_TYPE_CAPP>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on CAPP Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on CAPP Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_obus( + fapi2::Target<fapi2::TARGET_TYPE_OBUS>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on OBUS Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on OBUS Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_nv( + fapi2::Target<fapi2::TARGET_TYPE_NV>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on NV Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on NV Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_sbe( + fapi2::Target<fapi2::TARGET_TYPE_SBE>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on SBE Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on SBE Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_ppe( + fapi2::Target<fapi2::TARGET_TYPE_PPE>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on PPE Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on PPE Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_perv( + fapi2::Target<fapi2::TARGET_TYPE_PERV>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on PERV Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on PERV Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_phb( + fapi2::Target<fapi2::TARGET_TYPE_PHB>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on PHB Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on PHB Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + +fapi2::ReturnCode p9_sample_procedure_pec( + fapi2::Target<fapi2::TARGET_TYPE_PEC>& i_target, + uint8_t expectedValue) +{ + uint8_t l_attr_scratch = 0; + FAPI_ERR("Entering ..."); + FAPI_ERR("Set Scratch Attr on PEC Target"); + FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + expectedValue)); + + FAPI_ERR("Get Scratch Attr on PEC Target"); + FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_SCRATCH_UINT8_1, i_target, + l_attr_scratch)); + FAPI_ERR("Read scratch value : %d , expected it to be %d", l_attr_scratch, expectedValue); + +fapi_try_exit: + FAPI_ERR("Exiting ..."); + return fapi2::current_err; + +} + |
