Secure memory allocation and setup

p9_mss_eff_grouping.C:
  - determines whether secure mem is requested, reserves smf space
  - always reserve smf at end of range because of end-of-range bit
  - set addr15 when reporting smf base address
  - mask off group_id(0) via chip address extension if smf is enabled
  - updated to set value of attr_smf_enabled
  - enhanced error reporting with smf config/supported values
  - made values reported to attr_mss_mcs_group_32 more clear

p9_mss_setup_bars.C:
  - set MCFGPA/MCFGPMA registers with SMF data
  - fixed scom registers for MCFGPA/MCFGPMA hole setup
  - added note to leave MCFIR_invalid_smf masked for HW451708/HW451711
  - added assert to check for HOLE1 and SMF enable overlaps

p9_query_mssinfo.C:
  - updated to print out SMF reservations
  - print out HTM/OCC/SMF reservations regardless of mirroring enable

p9_fbc_utils.C:
  - prevent group_id(0)=1 from affecting mappable memory ranges

p9_sbe_fabricinit.C:
  - mask off group_id(0) via chip address extension if smf is enabled

p9_setup_sbe_config.C, p9_sbe_attr_setup.C:
  - use scratch_reg6 bit(16) to pass smf_config value

initfiles:
  - removed setup to use other addr bits as secure bit; core only uses addr15
  - added setup for ncu addr15 value in hcode
  - always set addr15 config bit in bridge unit if smf is supported
  - set addr15 bit across all mcs if smf is enabled
  - added in settings to enable smf in nmmu unit
  - hardcode group_id(0) bit in chipext mask for bridge unit if smf is supported

attributes:
  - ATTR_SMF_ENABLE is a system level attribute
  - changed SMF_ENABLE->SMF_CONFIG; smf_enabled will be (config && supported)

CQ:HW451708
CQ:HW451711
Change-Id: I0c35a362d68dab43758e7dfbd78fff702238ef2f
Original-Change-Id: I6cf85600354baa322e959c922f596ecc5c68a458
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57322
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Thi N. Tran <thi@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Dev-Ready: Brent Wieman <bwieman@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Reviewed-by: Joseph J. McGill <jmcgill@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72548
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>

0 files changed, 0 insertions, 0 deletions