Update Explorer FW Command IDs

Updating the code to be in sync the latest version of the Microsemi
Firmware spec (March 2019).

Change-Id: I9189be2abf2551f7e7d286eaf87f2c32558db333
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/75231
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/75356
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>

2 files changed, 35 insertions, 12 deletions

diff --git a/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/exp_draminit_utils.C b/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/exp_draminit_utils.C
index 94d67589d..30683e5bb 100644
--- a/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/exp_draminit_utils.C
+++ b/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/exp_draminit_utils.C
@@ -48,7 +48,7 @@ namespace exp
 void setup_cmd_params(const uint32_t i_cmd_data_crc, host_fw_command_struct& o_cmd)
 {
     // Issue full boot mode cmd though EXP-FW REQ buffer
-    o_cmd.cmd_id = mss::exp::omi::FW_SPD_DATA_SET;
+    o_cmd.cmd_id = mss::exp::omi::EXP_FW_DDR_PHY_INIT;
     o_cmd.cmd_flags = 0;
 
     // TK - Fabricated value need to figure out if we'll be creating req_id tables
diff --git a/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/shared/exp_consts.H b/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/shared/exp_consts.H
index 5bc631f0c..0855fc102 100644
--- a/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/shared/exp_consts.H
+++ b/src/import/chips/ocmb/explorer/procedures/hwp/memory/lib/shared/exp_consts.H
@@ -226,17 +226,40 @@ namespace omi
 ///
 enum cmd_and_response_id
 {
-    FW_DDR_INTERFACE_INIT = 0x01,
-    FW_TEMP_SENSOR_INIT = 0x02,
-    FW_ERR_LOGGING_INTERFACE_INIT = 0x03,
-    FW_GO_COMMAND = 0x04,
-    FW_ADAPTER_PROPERTIES_GET = 0x05,
-    FW_STATUS_GET = 0x06,
-    FW_TEMPERATURE_GET = 0x07,
-    FW_ERROR_LOG_GET = 0x08,
-    FW_SPD_DATA_SET = 0x09,
-    FW_BINARY_UPGRADE = 0x0A,
-    FW_FLASH_LOADER_VERSION_INFO = 0x0B,
+    // initialize the DDR PHY controller when Step-by-Step BOOT mode
+    //  is selected
+    EXP_FW_PHY_STEP_BY_STEP_INIT = 0x01,
+
+    // sent by the Host along with PHY initialization data copied
+    //  into data buffer for FW to use for configuring DDR PHY interface.
+    EXP_FW_DDR_PHY_INIT = 0x02,
+
+    // read temperature sensor
+    EXP_FW_FW_TEMP_SENSOR_PASS_THROUGH_READ = 0x03,
+
+    // configure temperature sensor
+    EXP_FW_FW_TEMP_SENSOR_PASS_THROUGH_WRITE = 0x04,
+
+    // configure interval read mechanism
+    EXP_FW_TEMP_SENSOR_CONFIG_INTERVAL_READ = 0x05,
+
+    // transition the FW into runtime mode when Step-by-Step BOOT mode
+    //  is selected
+    EXP_FW_GO_COMMAND = 0x06,
+
+    // determine various configurations related to controller
+    EXP_FW_ADAPTER_PROPERTIES_GET = 0x07,
+
+    // sent by Host along with latest FW executable code, which is
+    //  copied into data buffer location so that existing FW can
+    //  upgrade the FW image
+    EXP_FW_BINARY_UPGRADE = 0x08,
+
+    // find the flash loader version information
+    EXP_FW_FLASH_LOADER_VERSION_INFO = 0x09,
+
+    // read the error logs from various modules of Explorer block
+    EXP_FW_ERROR_LOG_GET = 0x0A,
 };
 
 ///