path: root/opcodes/ChangeLog

2005-09-06  Chao-ying Fu  <fu@mips.com>

	* mips-opc.c (MT32): New define.
	(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the
	bottom to avoid opcode collision with "mftr" and "mttr".
	Add MT instructions.
	* mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2.
	(print_insn_args): Add supports for +t, +T, !, $, *, &, g operand
	formats.

2005-09-02  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (coprocessor_opcodes): Add null terminator.

2005-09-02  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (coprocessor_opcodes): New.
	(arm_opcodes, thumb32_opcodes): Remove coprocessor insns.
	(print_insn_coprocessor): New function.
	(print_insn_arm): Use print_insn_coprocessor.  Remove coprocessor
	format characters.
	(print_insn_thumb32): Use print_insn_coprocessor.

2005-08-30  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (thumb_opcodes): Disassemble sub(3) as subs.

2005-08-26  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (intel_operand_size): New, broken out from OP_E for
	re-use.
	(OP_E): Call intel_operand_size, move call site out of mode
	dependent code.
	(OP_OFF): Call intel_operand_size if suffix_always. Remove
	ATTRIBUTE_UNUSED from parameters.
	(OP_OFF64): Likewise.
	(OP_ESreg): Call intel_operand_size.
	(OP_DSreg): Likewise.
	(OP_DIR): Use colon rather than semicolon as separator of far
	jump/call operands.

2005-08-25  Chao-ying Fu  <fu@mips.com>

	* mips-opc.c (WR_a, RD_a, MOD_a, DSP_VOLA, D32): New define.
	(mips_builtin_opcodes): Add DSP instructions.
	* mips-dis.c (mips_arch_choices): Enable INSN_DSP for mips32, mips32r2,
	mips64, mips64r2.
	(print_insn_args): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, :, ', @
	operand formats.

2005-08-23  David Ung  <davidu@mips.com>

	* mips16-opc.c (mips16_opcodes): Add the MIPS16e jalrc/jrc
	instructions to the table. 

2005-08-18  Alan Modra  <amodra@bigpond.net.au>

	* a29k-dis.c: Delete.
	* Makefile.am: Remove a29k support.
	* configure.in: Likewise.
	* disassemble.c: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2005-08-15  Daniel Jacobowitz  <dan@codesourcery.com>

	* ppc-dis.c (powerpc_dialect): Handle e300.
	(print_ppc_disassembler_options): Likewise.
	* ppc-opc.c (PPCE300): Define.
	(powerpc_opcodes): Mark icbt as available for the e300.

2005-08-13  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* hppa-dis.c (print_insn_hppa): Don't print '%' before register names.
	Use "rp" instead of "%r2" in "b,l" insns.

2005-08-12 Martin Schwidefsky  <schwidefsky@de.ibm.com>

	* s390-dis.c (print_insn_s390): Print unsigned operands with %u.
	* s390-mkopc.c (s390_opcode_cpu_val): Add support for cpu type z9-109.
	(main): Likewise.
	* s390-opc.c (I32_16, U32_16, M_16): Add defines 32 bit immediates
	and 4 bit optional masks.
	(INSTR_RIL_RI, INSTR_RIL_RU, INSTR_RRF_M0RR, INSTR_RSE_CCRD,
	INSTR_RSY_CCRD, INSTR_SSF_RRDRD): Add new instruction formats.
	(MASK_RIL_RI, MASK_RIL_RU, MASK_RRF_M0RR, MASK_RSE_CCRD,
	MASK_RSY_CCRD, MASK_SSF_RRDRD): Likewise.
	(s390_opformats): Likewise.
	* s390-opc.txt: Add new instructions for cpu type z9-109.

2005-08-05  John David Anglin  <dave.anglin@nrc-crnc.gc.ca>

	* hppa-dis.c (print_insn_hppa): Prefix 21-bit values with "L%".

2005-07-29  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c: Fix disassebly of thumb2 writeback addressing modes.

2005-07-29  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (thumb32_opc): Fix addressing mode for tbh.
	(print_insn_thumb32): Fix decoding of thumb2 'I' operands.

2005-07-25  DJ Delorie  <dj@redhat.com>

	* m32c-asm.c Regenerate.
	* m32c-dis.c Regenerate.

2005-07-20  DJ Delorie  <dj@redhat.com>

	* disassemble.c (disassemble_init_for_target): M32C ISAs are
	enums, so convert them to bit masks, which attributes are.

2005-07-18  Nick Clifton  <nickc@redhat.com>

	* configure.in: Restore alpha ordering to list of arches.
	* configure: Regenerate.
	* disassemble.c: Restore alpha ordering to list of arches.

2005-07-18  Nick Clifton  <nickc@redhat.com>

	* m32c-asm.c: Regenerate.
	* m32c-desc.c: Regenerate.
	* m32c-desc.h: Regenerate.
	* m32c-dis.c: Regenerate.
	* m32c-ibld.h: Regenerate.
	* m32c-opc.c: Regenerate.
	* m32c-opc.h: Regenerate.

2005-07-18  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (PNI_Fixup): Update comment.
	(VMX_Fixup): Properly handle the suffix check.

2005-07-16  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* hppa-dis.c (print_insn_hppa): Add space after 'w' in wide-mode
	mfctl disassembly.

2005-07-16  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	(stamp-m32c): Fix cpu dependencies.
	* Makefile.in: Regenerate.
	* ip2k-dis.c: Regenerate.

2007-07-15  H.J. Lu <hongjiu.lu@intel.com>

	* i386-dis.c (OP_VMX): New. Handle Intel VMX Instructions.
	(VMX_Fixup): New. Fix up Intel VMX Instructions.
	(Em): New.
	(Gm): New.
	(VM): New.
	(dis386_twobyte): Updated entries 0x78 and 0x79.
	(twobyte_has_modrm): Likewise.
	(grps): Use OP_VMX in the "sgdtIQ" entry. Updated GRP9.
	(OP_G): Handle m_mode.

2005-07-14  Jim Blandy  <jimb@redhat.com>

	Add support for the Renesas M32C and M16C.
	* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
	* m32c-desc.h, m32c-opc.h: New.
	* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
	(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
	m32c-opc.c.
	(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
	m32c-ibld.lo, m32c-opc.lo.
	(CLEANFILES): List stamp-m32c.
	(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
	(CGEN_CPUS): Add m32c.
	(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
	(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
	(m32c_opc_h): New variable.
	(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
	(m32c-opc.lo): New rules.
	* Makefile.in: Regenerated.
	* configure.in: Add case for bfd_m32c_arch.
	* configure: Regenerated.
	* disassemble.c (ARCH_m32c): New.
	[ARCH_m32c]: #include "m32c-desc.h".
	(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
	(disassemble_init_for_target) [ARCH_m32c]: Same.

	* cgen-ops.h, cgen-types.h: New files.
	* Makefile.am (HFILES): List them.
	* Makefile.in: Regenerated.
	
2005-07-07  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

	* arc-dis.c, arm-dis.c, cris-dis.c, crx-dis.c, d10v-dis.c,
	d30v-dis.c, fr30-dis.c, h8300-dis.c, h8500-dis.c, i860-dis.c,
	ia64-dis.c, ip2k-dis.c, m10200-dis.c, m10300-dis.c,
	m88k-dis.c, mcore-dis.c, mips-dis.c, ms1-dis.c, or32-dis.c,
	ppc-dis.c, sh64-dis.c, sparc-dis.c, tic4x-dis.c, tic80-dis.c,
	v850-dis.c: Fix format bugs.
	* ia64-gen.c (fail, warn): Add format attribute.
	* or32-opc.c (debug): Likewise.

2005-07-07  Khem Raj  <kraj@mvista.com>

	* arm-dis.c (opcode32 arm_opcodes): Fix ARM VFP fadds instruction
	disassembly pattern.

2005-07-06  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am (stamp-m32r): Fix path to cpu files.
	(stamp-m32r, stamp-iq2000): Likewise.
	* Makefile.in: Regenerate.
	* m32r-asm.c: Regenerate.
	* po/POTFILES.in: Remove arm-opc.h.  Add ms1-asm.c, ms1-desc.c,
	ms1-desc.h, ms1-dis.c, ms1-ibld.c, ms1-opc.c, ms1-opc.h.

2005-07-05  Nick Clifton  <nickc@redhat.com>

	* iq2000-asm.c: Regenerate.
	* ms1-asm.c: Regenerate.

2005-07-05  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (SVME_Fixup): New.
	(grps): Use it for the lidt entry.
	(PNI_Fixup): Call OP_M rather than OP_E.
	(INVLPG_Fixup): Likewise.

2005-07-04  H.J. Lu  <hongjiu.lu@intel.com>

	* tic30-dis.c (cnvt_tmsfloat_ieee): Use HUGE_VALF if defined.

2005-07-01  Nick Clifton  <nickc@redhat.com>

	* a29k-dis.c: Update to ISO C90 style function declarations and
	fix formatting.
	* alpha-opc.c: Likewise.
	* arc-dis.c: Likewise.
	* arc-opc.c: Likewise.
	* avr-dis.c: Likewise.
	* cgen-asm.in: Likewise.
	* cgen-dis.in: Likewise.
	* cgen-ibld.in: Likewise.
	* cgen-opc.c: Likewise.
	* cris-dis.c: Likewise.
	* d10v-dis.c: Likewise.
	* d30v-dis.c: Likewise.
	* d30v-opc.c: Likewise.
	* dis-buf.c: Likewise.
	* dlx-dis.c: Likewise.
	* h8300-dis.c: Likewise.
	* h8500-dis.c: Likewise.
	* hppa-dis.c: Likewise.
	* i370-dis.c: Likewise.
	* i370-opc.c: Likewise.
	* m10200-dis.c: Likewise.
	* m10300-dis.c: Likewise.
	* m68k-dis.c: Likewise.
	* m88k-dis.c: Likewise.
	* mips-dis.c: Likewise.
	* mmix-dis.c: Likewise.
	* msp430-dis.c: Likewise.
	* ns32k-dis.c: Likewise.
	* or32-dis.c: Likewise.
	* or32-opc.c: Likewise.
	* pdp11-dis.c: Likewise.
	* pj-dis.c: Likewise.
	* s390-dis.c: Likewise.
	* sh-dis.c: Likewise.
	* sh64-dis.c: Likewise.
	* sparc-dis.c: Likewise.
	* sparc-opc.c: Likewise.
	* sysdep.h: Likewise.
	* tic30-dis.c: Likewise.
	* tic4x-dis.c: Likewise.
	* tic80-dis.c: Likewise.
	* v850-dis.c: Likewise.
	* v850-opc.c: Likewise.
	* vax-dis.c: Likewise.
	* w65-dis.c: Likewise.
	* z8kgen.c: Likewise.
	
	* fr30-*: Regenerate.
	* frv-*: Regenerate.
	* ip2k-*: Regenerate.
	* iq2000-*: Regenerate.
	* m32r-*: Regenerate.
	* ms1-*: Regenerate.
	* openrisc-*: Regenerate.
	* xstormy16-*: Regenerate.

2005-06-23  Ben Elliston  <bje@gnu.org>

	* m68k-dis.c: Use ISC C90.
	* m68k-opc.c: Formatting fixes.

2005-06-16  David Ung  <davidu@mips.com>

        * mips16-opc.c (mips16_opcodes): Add the following MIPS16e
        instructions to the table; seb/seh/sew/zeb/zeh/zew.

2005-06-15  Dave Brolley  <brolley@redhat.com>

	Contribute Morpho ms1 on behalf of Red Hat
	* ms1-asm.c, ms1-desc.c, ms1-dis.c, ms1-ibld.c, ms1-opc.c, 
	ms1-opc.h: New files, Morpho ms1 target.

	2004-05-14  Stan Cox  <scox@redhat.com>

	* disassemble.c (ARCH_ms1): Define.
	(disassembler): Handle bfd_arch_ms1

	2004-05-13  Michael Snyder  <msnyder@redhat.com>

	* Makefile.am, Makefile.in: Add ms1 target.
	* configure.in: Ditto.

2005-06-08  Zack Weinberg  <zack@codesourcery.com>

	* arm-opc.h: Delete; fold contents into ...
	* arm-dis.c: ... here.  Move includes of internal COFF headers
	next to includes of internal ELF headers.
	(streq, WORD_ADDRESS, BDISP, BDISP23): Delete, unused.
	(struct arm_opcode): Rename struct opcode32.  Make 'assembler' const.
	(struct thumb_opcode): Rename struct opcode16.  Make 'assembler' const.
	(arm_conditional, arm_fp_const, arm_shift, arm_regname, regnames)
	(iwmmxt_wwnames, iwmmxt_wwssnames):
	Make const.
	(regnames): Remove iWMMXt coprocessor register sets.
	(iwmmxt_regnames, iwmmxt_cregnames): New statics.
	(get_arm_regnames): Adjust fourth argument to match above changes.
	(set_iwmmxt_regnames): Delete.
	(print_insn_arm): Constify 'c'.  Use ISO syntax for function
	pointer calls.  Expand sole use of BDISP.  Use iwmmxt_regnames
	and iwmmxt_cregnames, not set_iwmmxt_regnames.
	(print_insn_thumb16, print_insn_thumb32): Constify 'c'.  Use
	ISO syntax for function pointer calls.

2005-06-07  Zack Weinberg  <zack@codesourcery.com>

	* arm-dis.c: Split up the comments describing the format codes, so
	that the ARM and 16-bit Thumb opcode tables each have comments
	preceding them that describe all the codes, and only the codes,
	valid in those tables.  (32-bit Thumb table is already like this.)
	Reorder the lists in all three comments to match the order in
	which the codes are implemented.
	Remove all forward declarations of static functions.  Convert all
	function definitions to ISO C format.
	(print_insn_arm, print_insn_thumb16, print_insn_thumb32):
	Return nothing.
	(print_insn_thumb16): Remove unused case 'I'.
	(print_insn): Update for changed calling convention of subroutines.

2005-05-25  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (OP_E): In Intel mode, display 32-bit displacements in
	hex (but retain it being displayed as signed). Remove redundant
	checks. Add handling of displacements for 16-bit addressing in Intel
	mode.

2005-05-25  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (prefix_name): Remove pointless mode_64bit check.
	(OP_E): Remove redundant REX_EXTZ handling. Remove pointless
	masking of 'rm' in 16-bit memory address handling.

2005-05-19  Anton Blanchard  <anton@samba.org>

	* ppc-dis.c (powerpc_dialect): Handle "-Mpower5".
	(print_ppc_disassembler_options): Document it.
	* ppc-opc.c (SVC_LEV): Define.
	(LEV): Allow optional operand.
	(POWER5): Define.
	(powerpc_opcodes): Extend "sc".  Adjust "svc" and "svcl".  Add
	"hrfid", "popcntb", "fsqrtes", "fsqrtes.", "fre" and "fre.".

2005-05-19  Kelley Cook  <kcook@gcc.gnu.org>

	* Makefile.in:  Regenerate.

2005-05-17  Zack Weinberg  <zack@codesourcery.com>

	* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
	instructions.  Adjust disassembly of some opcodes to match
	unified syntax.
	(thumb32_opcodes): New table.
	(print_insn_thumb): Rename print_insn_thumb16; don't handle
	two-halfword branches here.
	(print_insn_thumb32): New function.
	(print_insn): Choose among print_insn_arm, print_insn_thumb16,
	and print_insn_thumb32.  Be consistent about order of
	halfwords when printing 32-bit instructions.

2005-05-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR 843
	* i386-dis.c (branch_v_mode): New.
	(indirEv): Use branch_v_mode instead of v_mode.
	(OP_E): Handle branch_v_mode.

2005-05-07  H.J. Lu  <hongjiu.lu@intel.com>

	* d10v-dis.c (dis_2_short): Support 64bit host.

2005-05-07  Nick Clifton  <nickc@redhat.com>

	* po/nl.po: Updated translation.

2005-05-07  Nick Clifton  <nickc@redhat.com>

	* Update the address and phone number of the FSF organization in
	the GPL notices in the following files:
	a29k-dis.c, aclocal.m4, alpha-dis.c, alpha-opc.c, arc-dis.c,
	arc-dis.h, arc-ext.c, arc-ext.h, arc-opc.c, arm-dis.c, arm-opc.h,
	avr-dis.c, cgen-asm.c, cgen-asm.in, cgen-dis.c, cgen-dis.in,
	cgen-ibld.in, cgen-opc.c, cgen.sh, cris-dis.c, cris-opc.c,
	crx-dis.c, crx-opc.c, d10v-dis.c, d10v-opc.c, d30v-dis.c,
	d30v-opc.c, dis-buf.c, dis-init.c, disassemble.c, dlx-dis.c,
	fr30-asm.c, fr30-desc.c, fr30-desc.h, fr30-dis.c, fr30-ibld.c,
	fr30-opc.c, fr30-opc.h, frv-asm.c, frv-desc.c, frv-desc.h,
	frv-dis.c, frv-ibld.c, frv-opc.c, frv-opc.h, h8300-dis.c,
	h8500-dis.c, h8500-opc.h, hppa-dis.c, i370-dis.c, i370-opc.c,
	i386-dis.c, i860-dis.c, i960-dis.c, ia64-asmtab.h, ia64-dis.c,
	ia64-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c,
	ia64-opc-f.c, ia64-opc-i.c, ia64-opc-m.c, ia64-opc-x.c,
	ia64-opc.c, ia64-opc.h, ip2k-asm.c, ip2k-desc.c, ip2k-desc.h,
	ip2k-dis.c, ip2k-ibld.c, ip2k-opc.c, ip2k-opc.h, iq2000-asm.c,
	iq2000-desc.c, iq2000-desc.h, iq2000-dis.c, iq2000-ibld.c,
	iq2000-opc.c, iq2000-opc.h, m10200-dis.c, m10200-opc.c,
	m10300-dis.c, m10300-opc.c, m32r-asm.c, m32r-desc.c, m32r-desc.h,
	m32r-dis.c, m32r-ibld.c, m32r-opc.c, m32r-opc.h, m32r-opinst.c,
	m68hc11-dis.c, m68hc11-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c,
	maxq-dis.c, mcore-dis.c, mcore-opc.h, mips-dis.c, mips-opc.c,
	mips16-opc.c, mmix-dis.c, mmix-opc.c, msp430-dis.c, ns32k-dis.c,
	openrisc-asm.c, openrisc-desc.c, openrisc-desc.h, openrisc-dis.c,
	openrisc-ibld.c, openrisc-opc.c, openrisc-opc.h, opintl.h,
	or32-dis.c, or32-opc.c, pdp11-dis.c, pdp11-opc.c, pj-dis.c,
	pj-opc.c, ppc-dis.c, ppc-opc.c, s390-dis.c, s390-mkopc.c,
	s390-opc.c, sh-dis.c, sh-opc.h, sh64-dis.c, sh64-opc.c,
	sh64-opc.h, sparc-dis.c, sparc-opc.c, sysdep.h, tic30-dis.c,
	tic4x-dis.c, tic54x-dis.c, tic54x-opc.c, tic80-dis.c, tic80-opc.c,
	v850-dis.c, v850-opc.c, vax-dis.c, w65-dis.c, w65-opc.h,
	xstormy16-asm.c, xstormy16-desc.c, xstormy16-desc.h,
	xstormy16-dis.c, xstormy16-ibld.c, xstormy16-opc.c,
	xstormy16-opc.h, xtensa-dis.c, z8k-dis.c, z8kgen.c

2005-05-05  James E Wilson  <wilson@specifixinc.com>

	* ia64-opc.c: Include sysdep.h before libiberty.h.

2005-05-05  Nick Clifton  <nickc@redhat.com>

	* configure.in (ALL_LINGUAS): Add vi.
	* configure: Regenerate.
	* po/vi.po: New.

2005-04-26  Jerome Guitton  <guitton@gnat.com>

	* configure.in: Fix the check for basename declaration.
	* configure: Regenerate.

2005-04-19  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (RTO): Define.
	(powerpc_opcodes <tlbsx, tlbsx., tlbre>): Combine PPC403 and BOOKE
	entries to suit PPC440.

2005-04-18  Mark Kettenis  <kettenis@gnu.org>

	* i386-dis.c: Insert hyphens into selected VIA PadLock extensions.
	Add xcrypt-ctr.

2005-04-14  Nick Clifton  <nickc@redhat.com>

	* po/fi.po: New translation: Finnish.
	* configure.in (ALL_LINGUAS): Add fi.
	* configure: Regenerate.

2005-04-14  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am (NO_WERROR): Define.
	* configure.in: Invoke AM_BINUTILS_WARNINGS.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2005-04-04  Nick Clifton  <nickc@redhat.com>

	* fr30-asm.c: Regenerate.
	* frv-asm.c: Regenerate.
	* iq2000-asm.c: Regenerate.
	* m32r-asm.c: Regenerate.
	* openrisc-asm.c: Regenerate.

2005-04-01  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (PNI_Fixup): Neither mwait nor monitor have any
	visible operands in Intel mode. The first operand of monitor is
	%rax in 64-bit mode.

2005-04-01  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (INVLPG_Fixup): Decode rdtscp; change code to allow for
	easier future additions.

2005-03-31  Jerome Guitton  <guitton@gnat.com>

	* configure.in: Check for basename.
	* configure: Regenerate.
	* config.in: Ditto.

2005-03-29  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (SEG_Fixup): New.
	(Sv): New.
	(dis386): Use "Sv" for 0x8c and 0x8e.

2005-03-21  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
	    Nick Clifton  <nickc@redhat.com>

	* vax-dis.c: (entry_addr): New varible:  An array of user supplied
	function entry mask addresses.
	(entry_addr_occupied_slots): New variable: The number of occupied
	elements in entry_addr.
	(entry_addr_total_slots): New variable: The total number of
	elements in entry_addr.
	(parse_disassembler_options): New function.  Fills in the entry_addr
	array.
	(free_entry_array): New function.  Release the memory used by the
	entry addr array.  Suppressed because there is no way to call it.
	(is_function_entry): Check if a given address is a function's
	start address by looking at supplied entry mask addresses and
	symbol information, if available.
	(print_insn_vax): Use parse_disassembler_options and is_function_entry.

2005-03-23  H.J. Lu  <hongjiu.lu@intel.com>

	* cris-dis.c (print_with_operands): Use ~31L for long instead
	of ~31.

2005-03-20  H.J. Lu  <hongjiu.lu@intel.com>

	* mmix-opc.c (O): Revert the last change.
	(Z): Likewise.

2005-03-19  H.J. Lu  <hongjiu.lu@intel.com>

	* mmix-opc.c (O): Use 24UL instead of 24 for unsigned long.
	(Z): Likewise.

2005-03-19  Hans-Peter Nilsson  <hp@bitrange.com>

	* mmix-opc.c (O, Z): Force expression as unsigned long.

2005-03-18  Nick Clifton  <nickc@redhat.com>

	* ip2k-asm.c: Regenerate.
	* op/opcodes.pot: Regenerate.

2005-03-16  Nick Clifton  <nickc@redhat.com>
	    Ben Elliston  <bje@au.ibm.com>

	* configure.in (werror): New switch: Add -Werror to the
	compiler command line.  Enabled by default.  Disable via
	--disable-werror.
	* configure: Regenerate.

2005-03-16  Alan Modra  <amodra@bigpond.net.au>

	* ppc-dis.c (powerpc_dialect): Don't set PPC_OPCODE_ALTIVEC when
	BOOKE.

2005-03-15  Alan Modra  <amodra@bigpond.net.au>

	* po/es.po: Commit new Spanish translation.

	* po/fr.po: Commit new French translation.

2005-03-14  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

	* vax-dis.c: Fix spelling error
	(print_insn_vax): Use ".word 0x0012 # Entry mask: r1 r2 >" instead
	of just "Entry mask: < r1 ... >"

2005-03-12  Zack Weinberg  <zack@codesourcery.com>

	* arm-dis.c (arm_opcodes): Document %E and %V.
	Add entries for v6T2 ARM instructions:
	bfc bfi mls strht ldrht ldrsht ldrsbt movw movt rbit ubfx sbfx.
	(print_insn_arm): Add support for %E and %V.
	(thumb_opcodes): Add ARMv6K instructions nop, sev, wfe, wfi, yield.

2005-03-10  Jeff Baker  <jbaker@qnx.com>
	    Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (insert_sprg, extract_sprg): New Functions.
	(powerpc_operands <SPRG>): Call the above.  Bit field is 5 bits.
	(SPRG_MASK): Delete.
	(XSPRG_MASK): Mask off extra bits now part of sprg field.
	(powerpc_opcodes): Asjust mfsprg and mtsprg to suit new mask.  Move
	mfsprg4..7 after msprg and consolidate.

2005-03-09  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

	* vax-dis.c (entry_mask_bit): New array.
	(print_insn_vax): Decode function entry mask.

2005-03-07  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Fix encoding of efscfd.

2005-03-05  Alan Modra  <amodra@bigpond.net.au>

	* po/opcodes.pot: Regenerate.

2005-03-03  Ramana Radhakrishnan  <ramana.radhakrishnan@codito.com>

	* arc-dis.c (a4_decoding_class): New enum.
	(dsmOneArcInst): Use the enum values for the decoding class.
	Remove redundant case in the switch for decodingClass value 11.

2005-03-02  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (print_insn): Suppress lock prefix printing for cr8...15
	accesses.
	(OP_C): Consider lock prefix in non-64-bit modes.

2005-02-24  Alan Modra  <amodra@bigpond.net.au>

	* cris-dis.c (format_hex): Remove ineffective warning fix.
	* crx-dis.c (make_instruction): Warning fix.
	* frv-asm.c: Regenerate.

2005-02-23  Nick Clifton  <nickc@redhat.com>

	* cgen-dis.in: Use bfd_byte for buffers that are passed to
	read_memory.

	* ia64-opc.c (locate_opcode_ent): Initialise opval array.

	* crx-dis.c (make_instruction): Move argument structure into inner
	scope and ensure that all of its fields are initialised before
	they are used.

	* fr30-asm.c: Regenerate.
	* fr30-dis.c: Regenerate.
	* frv-asm.c: Regenerate.
	* frv-dis.c: Regenerate.
	* ip2k-asm.c: Regenerate.
	* ip2k-dis.c: Regenerate.
	* iq2000-asm.c: Regenerate.
	* iq2000-dis.c: Regenerate.
	* m32r-asm.c: Regenerate.
	* m32r-dis.c: Regenerate.
	* openrisc-asm.c: Regenerate.
	* openrisc-dis.c: Regenerate.
	* xstormy16-asm.c: Regenerate.
	* xstormy16-dis.c: Regenerate.

2005-02-22  Alan Modra  <amodra@bigpond.net.au>

	* arc-ext.c: Warning fixes.
	* arc-ext.h: Likewise.
	* cgen-opc.c: Likewise.
	* ia64-gen.c: Likewise.
	* maxq-dis.c: Likewise.
	* ns32k-dis.c: Likewise.
	* w65-dis.c: Likewise.
	* ia64-asmtab.c: Regenerate.

2005-02-22  Alan Modra  <amodra@bigpond.net.au>

	* fr30-desc.c: Regenerate.
	* fr30-desc.h: Regenerate.
	* fr30-opc.c: Regenerate.
	* fr30-opc.h: Regenerate.
	* frv-desc.c: Regenerate.
	* frv-desc.h: Regenerate.
	* frv-opc.c: Regenerate.
	* frv-opc.h: Regenerate.
	* ip2k-desc.c: Regenerate.
	* ip2k-desc.h: Regenerate.
	* ip2k-opc.c: Regenerate.
	* ip2k-opc.h: Regenerate.
	* iq2000-desc.c: Regenerate.
	* iq2000-desc.h: Regenerate.
	* iq2000-opc.c: Regenerate.
	* iq2000-opc.h: Regenerate.
	* m32r-desc.c: Regenerate.
	* m32r-desc.h: Regenerate.
	* m32r-opc.c: Regenerate.
	* m32r-opc.h: Regenerate.
	* m32r-opinst.c: Regenerate.
	* openrisc-desc.c: Regenerate.
	* openrisc-desc.h: Regenerate.
	* openrisc-opc.c: Regenerate.
	* openrisc-opc.h: Regenerate.
	* xstormy16-desc.c: Regenerate.
	* xstormy16-desc.h: Regenerate.
	* xstormy16-opc.c: Regenerate.
	* xstormy16-opc.h: Regenerate.

2005-02-21  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am"
	* Makefile.in: Regenerate.

2005-02-15  Nick Clifton  <nickc@redhat.com>

	* cgen-dis.in (print_address): Add an ATTRIBUTE_UNUSED to prevent
	compile time warnings.
	(print_keyword): Likewise.
	(default_print_insn): Likewise.

	* fr30-desc.c: Regenerated.
	* fr30-desc.h: Regenerated.
	* fr30-dis.c: Regenerated.
	* fr30-opc.c: Regenerated.
	* fr30-opc.h: Regenerated.
	* frv-desc.c: Regenerated.
	* frv-dis.c: Regenerated.
	* frv-opc.c: Regenerated.
	* ip2k-asm.c: Regenerated.
	* ip2k-desc.c: Regenerated.
	* ip2k-desc.h: Regenerated.
	* ip2k-dis.c: Regenerated.
	* ip2k-opc.c: Regenerated.
	* ip2k-opc.h: Regenerated.
	* iq2000-desc.c: Regenerated.
	* iq2000-dis.c: Regenerated.
	* iq2000-opc.c: Regenerated.
	* m32r-asm.c: Regenerated.
	* m32r-desc.c: Regenerated.
	* m32r-desc.h: Regenerated.
	* m32r-dis.c: Regenerated.
	* m32r-opc.c: Regenerated.
	* m32r-opc.h: Regenerated.
	* m32r-opinst.c: Regenerated.
	* openrisc-desc.c: Regenerated.
	* openrisc-desc.h: Regenerated.
	* openrisc-dis.c: Regenerated.
	* openrisc-opc.c: Regenerated.
	* openrisc-opc.h: Regenerated.
	* xstormy16-desc.c: Regenerated.
	* xstormy16-desc.h: Regenerated.
	* xstormy16-dis.c: Regenerated.
	* xstormy16-opc.c: Regenerated.
	* xstormy16-opc.h: Regenerated.

2005-02-14  H.J. Lu  <hongjiu.lu@intel.com>

	* dis-buf.c (perror_memory): Use sprintf_vma to print out
	address.

2005-02-11  Nick Clifton  <nickc@redhat.com>

	* iq2000-asm.c: Regenerate.

	* frv-dis.c: Regenerate.

2005-02-07  Jim Blandy  <jimb@redhat.com>

	* Makefile.am (CGEN): Load guile.scm before calling the main
	application script.
	* Makefile.in: Regenerated.
	* cgen.sh: Be prepared for the 'cgen' argument to contain spaces.
	Simply pass the cgen-opc.scm path to ${cgen} as its first
	argument; ${cgen} itself now contains the '-s', or whatever is
	appropriate for the Scheme being used.

2005-01-31  Andrew Cagney  <cagney@gnu.org>

	* configure: Regenerate to track ../gettext.m4.

2005-01-31  Jan Beulich  <jbeulich@novell.com>

	* ia64-gen.c (NELEMS): Define.
	(shrink): Generate alias with missing second predicate register when
	opcode has two outputs and these are both predicates.
	* ia64-opc-i.c (FULL17): Define.
	(ia64_opcodes_i): Add mov-to-pr alias without second input. Use FULL17
	here to generate output template.
	(TBITCM, TNATCM): Undefine after use.
	* ia64-opc-m.c (ia64_opcodes_i): Add alloc alias without ar.pfs as
	first input. Add ld16 aliases without ar.csd as second output. Add
	st16 aliases without ar.csd as second input. Add cmpxchg aliases
	without ar.ccv as third input. Add cmp8xchg16 aliases without ar.csd/
	ar.ccv as third/fourth inputs. Consolidate through...
	(CMPXCHG_acq, CMPXCHG_rel, CMPXCHG_1, CMPXCHG_2, CMPXCHG_4, CMPXCHG_8,
	CMPXCHGn, CMP8XCHG16, CMPXCHG_ALL): Define.
	* ia64-asmtab.c: Regenerate.

2005-01-27  Andrew Cagney  <cagney@gnu.org>

	* configure: Regenerate to track ../gettext.m4 change.

2005-01-25  Alexandre Oliva  <aoliva@redhat.com>

	2004-11-10  Alexandre Oliva  <aoliva@redhat.com>
	* frv-asm.c: Rebuilt.
	* frv-desc.c: Rebuilt.
	* frv-desc.h: Rebuilt.
	* frv-dis.c: Rebuilt.
	* frv-ibld.c: Rebuilt.
	* frv-opc.c: Rebuilt.
	* frv-opc.h: Rebuilt.

2005-01-24  Andrew Cagney  <cagney@gnu.org>

	* configure: Regenerate, ../gettext.m4 was updated.

2005-01-21  Fred Fish  <fnf@specifixinc.com>

	* mips-opc.c:  Change INSN_ALIAS to INSN2_ALIAS.
	Change INSN_WRITE_MDMX_ACC to INSN2_WRITE_MDMX_ACC.
	Change INSN_READ_MDMX_ACC to INSN2_READ_MDMX_ACC.
	* mips-dis.c: Ditto.

2005-01-20  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (powerpc_opcodes): Add optional 'l' arg to tlbiel.

2005-01-19  Fred Fish  <fnf@specifixinc.com>

	* mips-dis.c (no_aliases): New disassembly option flag.
	(set_default_mips_dis_options): Init no_aliases to zero.
	(parse_mips_dis_option): Handle no-aliases option.
	(print_insn_mips): Ignore table entries that are aliases
	if no_aliases is set.
	(print_insn_mips16): Ditto.
	* mips-opc.c (mips_builtin_opcodes): Add initializer column for
	new pinfo2 member and add INSN_ALIAS initializers as needed.  Also
	move WR_MACC and RD_MACC initializers from pinfo to pinfo2.
	* mips16-opc.c (mips16_opcodes): Ditto.

2005-01-17  Andrew Stubbs  <andrew.stubbs@st.com>

	* sh-opc.h (arch_sh2a_or_sh3e,arch_sh2a_or_sh4): Correct definition.
	(inheritance diagram): Add missing edge.
	(arch_sh1_up): Rename arch_sh_up to match external name to make life
	easier for the testsuite.
	(arch_sh4_nofp_up): Likewise, rename arch_sh4_nofpu_up.
	(arch_sh4a_nofp_up): Likewise, rename arch_sh4a_nofpu_up.
	(arch_sh2a_nofpu_or_sh4_nommu_nofpu_up): Add missing
	arch_sh2a_or_sh4_up child.
	(sh_table): Do renaming as above.
	Correct comment for ldc.l for gas testsuite to read.
	Remove rogue mul.l from sh1 (duplicate of the one for sh2).
	Correct comments for movy.w and movy.l for gas testsuite to read.
	Correct comments for fmov.d and fmov.s for gas testsuite to read.

2005-01-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E): Don't ignore scale in SIB for 64 bit mode.

2005-01-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E): Ignore scale when index == 0x4 in SIB.

2005-01-10  Andreas Schwab  <schwab@suse.de>

	* disassemble.c (disassemble_init_for_target) <case
	bfd_arch_ia64>: Set skip_zeroes to 16.
	<case bfd_arch_tic4x>: Set skip_zeroes to 32.

2004-12-23  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c: Mark 'bcop' instruction as RELAXABLE.

2004-12-14  Svein E. Seldal  <Svein.Seldal@solidas.com>

	* avr-dis.c: Prettyprint. Added printing of symbol names in all
	memory references. Convert avr_operand() to C90 formatting.

2004-12-05  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-dis.c (print_arg): Use 'info->print_address_func' for address printing.

2004-11-29  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c (crx_optab): Mark all rbase_disps* operands as signed.
	(no_op_insn): Initialize array with instructions that have no
	operands.
	* crx-dis.c (make_instruction): Get rid of COP_BRANCH_INS operand swapping.

2004-11-29  Richard Earnshaw  <rearnsha@arm.com>

	* arm-dis.c: Correct top-level comment.

2004-11-27  Richard Earnshaw  <rearnsha@arm.com>

	* arm-opc.h (arm_opcode, thumb_opcode): Add extra field for the
	architecuture defining the insn.
	(arm_opcodes, thumb_opcodes): Delete.  Move to ...
	* arm-dis.c (arm_opcodes, thumb_opcodes): Here.  Add architecutre
	field.
	Also include opcode/arm.h.
	* Makefile.am (arm-dis.lo): Update dependency list.
	* Makefile.in: Regenerate.

2004-11-22  Ravi Ramaseshan  <ravi.ramaseshan@codito.com>

	* opcode/arc-opc.c (insert_base): Modify ls_operand[LS_OFFSET] to
	reflect the change to the short immediate syntax.

2004-11-19  Alan Modra  <amodra@bigpond.net.au>

	* or32-opc.c (debug): Warning fix.
	* po/POTFILES.in: Regenerate.

	* maxq-dis.c: Formatting.
	(print_insn): Warning fix.

2004-11-17  Daniel Jacobowitz  <dan@codesourcery.com>

	* arm-dis.c (WORD_ADDRESS): Define.
	(print_insn): Use it.  Correct big-endian end-of-section handling.

2004-11-08  Inderpreet Singh   <inderpreetb@nioda.hcltech.com>
	    Vineet Sharma      <vineets@noida.hcltech.com>

	* maxq-dis.c: New file.
	* disassemble.c (ARCH_maxq): Define.
	(disassembler): Add 'print_insn_maxq_little' for handling maxq
	instructions..
	* configure.in: Add case for bfd_maxq_arch.
	* configure: Regenerate.
	* Makefile.am: Add support for maxq-dis.c
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.

2004-11-05  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c (crx_optab): Rename 'arg_icr' to 'arg_idxr' for Index register
	mode.
	* crx-dis.c: Likewise.

2004-11-04  Hans-Peter Nilsson  <hp@axis.com>

	Generally, handle CRISv32.
	* cris-dis.c (TRACE_CASE): Define as (disdata->trace_case).
	(struct cris_disasm_data): New type.
	(format_reg, format_hex, cris_constraint, print_flags)
	(get_opcode_entry): Add struct cris_disasm_data * parameter.  All
	callers changed.
	(format_sup_reg, print_insn_crisv32_with_register_prefix)
	(print_insn_crisv32_without_register_prefix)
	(print_insn_crisv10_v32_with_register_prefix)
	(print_insn_crisv10_v32_without_register_prefix)
	(cris_parse_disassembler_options): New functions.
	(bytes_to_skip, cris_spec_reg): Add enum cris_disass_family
	parameter.  All callers changed.
	(get_opcode_entry): Call malloc, not xmalloc.  Return NULL on
	failure.
	(cris_constraint) <case 'Y', 'U'>: New cases.
	(bytes_to_skip): Handle 'Y' and 'N' as 's'.  Skip size is 4 bytes
	for constraint 'n'.
	(print_with_operands) <case 'Y'>: New case.
	(print_with_operands) <case 'T', 'A', '[', ']', 'd', 'n', 'u'>
	<case 'N', 'Y', 'Q'>: New cases.
	(print_insn_cris_generic): Emit "bcc ." for zero and CRISv32.
	(print_insn_cris_with_register_prefix)
	(print_insn_cris_without_register_prefix): Call
	cris_parse_disassembler_options.
	* cris-opc.c (cris_spec_regs): Mention that this table isn't used
	for CRISv32 and the size of immediate operands.  New v32-only
	entries for bz, pid, srs, wz, exs, eda, dz, ebp, erp, nrp, ccs and
	spc.  Add v32-only 4-byte entries for p2, p3, p5 and p6.  Change
	ccr, ibr, irp to be v0..v10.  Change bar, dccr to be v8..v10.
	Change brp to be v3..v10.
	(cris_support_regs): New vector.
	(cris_opcodes): Update head comment.  New format characters '[',
	']', space, 'A', 'd', 'N', 'n', 'Q', 'T', 'u', 'U', 'Y'.
	Add new opcodes for v32 and adjust existing opcodes to accommodate
	differences to earlier variants.
	(cris_cond15s): New vector.

2004-11-04 Jan Beulich <jbeulich@novell.com>

	* i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.
	(indirEb): Remove.
	(Mp): Use f_mode rather than none at all.
	(t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode
	replaces what previously was x_mode; x_mode now means 128-bit SSE
	operands.
	(dis386): Make far jumps and calls have an 'l' prefix only in AT&T
	mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.
	pinsrw's second operand is Edqw.
	(grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's
	operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,
	fldenv, frstor, fsave, fstenv all should also have suffixes in Intel
	mode when an operand size override is present or always suffixing.
	More instructions will need to be added to this group.
	(putop): Handle new macro chars 'C' (short/long suffix selector),
	'I' (Intel mode override for following macro char), and 'J' (for
	adding the 'l' prefix to far branches in AT&T mode). When an
	alternative was specified in the template, honor macro character when
	specified for Intel mode.
	(OP_E): Handle new *_mode values. Correct pointer specifications for
	memory operands. Consolidate output of index register.
	(OP_G): Handle new *_mode values.
	(OP_I): Handle const_1_mode.
	(OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate
	respective opcode prefix bits have been consumed.
	(OP_EM, OP_EX): Provide some default handling for generating pointer
	specifications.

2004-10-28  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c (REV_COP_INST): New macro, reverse operand order of
	COP_INST macro.

2004-10-27  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-dis.c (enum REG_ARG_TYPE): New, replacing COP_ARG_TYPE.
	(getregliststring): Support HI/LO and user registers.
	* crx-opc.c (crx_instruction): Update data structure according to the
	rearrangement done in CRX opcode header file.
	(crx_regtab):  Likewise.
	(crx_optab):  Likewise.
	(crx_instruction): Reorder load/stor instructions, remove unsupported
	formats.
	support new Co-Processor instruction 'cpi'.

2004-10-27  Nick Clifton  <nickc@redhat.com>

	* opcodes/iq2000-asm.c: Regenerate.
	* opcodes/iq2000-desc.c: Regenerate.
	* opcodes/iq2000-desc.h: Regenerate.
	* opcodes/iq2000-dis.c: Regenerate.
	* opcodes/iq2000-ibld.c: Regenerate.
	* opcodes/iq2000-opc.c: Regenerate.
	* opcodes/iq2000-opc.h: Regenerate.

2004-10-21  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c (crx_instruction): Replace i3, i4, i5 with us3,
	us4, us5 (respectively).
	Remove unsupported 'popa' instruction.
	Reverse operands order in store co-processor instructions.

2004-10-15  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am"
	* Makefile.in: Regenerate.

2004-10-12  Bob Wilson  <bob.wilson@acm.org>

	* xtensa-dis.c: Use ISO C90 formatting.

2004-10-09  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c: Revert 2004-09-09 change.

2004-10-07  Bob Wilson  <bob.wilson@acm.org>

	* xtensa-dis.c (state_names): Delete.
	(fetch_data): Use xtensa_isa_maxlength.
	(print_xtensa_operand): Replace operand parameter with opcode/operand
	pair.  Remove print_sr_name parameter.  Use new xtensa-isa.h functions.
	(print_insn_xtensa): Use new xtensa-isa.h functions.  Handle multislot
	instruction bundles.  Use xmalloc instead of malloc.

2004-10-07  David Gibson  <david@gibson.dropbear.id.au>

	* ppc-opc.c: Replace literal "0"s with NULLs in pointer
	initializers.

2004-10-07  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c (crx_instruction): Support Co-processor insns.
	* crx-dis.c (COP_ARG_TYPE): New enum for CO-Processor arguments.
	(getregliststring): Change function to use the above enum.
	(print_arg): Handle CO-Processor insns.
	(crx_cinvs): Add 'b' option to invalidate the branch-target
	cache.

2004-10-06  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add efscfd, efdabs, efdnabs,
	efdneg, efdadd, efdsub, efdmul, efddiv, efdcmpgt, efdcmplt,
	efdcmpeq, efdtstgt, efdtstlt, efdtsteq, efdcfsi, efdcfsid,
	efdcfui, efdcfuid, efdcfsf, efdcfuf, efdctsi, efdctsidz, efdctsiz,
	efdctui, efdctuidz, efdctuiz, efdctsf, efdctuf, efdctuf, efdcfs.

2004-10-01  Bill Farmer  <Bill@the-farmers.freeserve.co.uk>

	* pdp11-dis.c (print_insn_pdp11): Subtract the SOB's displacement
	rather than add it.

2004-09-30  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (print_insn_arm): Handle 'e' for SMI instruction.
	* arm-opc.h: Document %e.  Add ARMv6ZK instructions.

2004-09-17  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am (AUTOMAKE_OPTIONS): Require 1.9.
	(CONFIG_STATUS_DEPENDENCIES): New.
	(Makefile): Removed.
	(config.status): Likewise.
	* Makefile.in: Regenerated.

2004-09-17  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
	* po/opcodes.pot: Regenerate.

2004-09-11  Andreas Schwab  <schwab@suse.de>

	* configure: Rebuild.

2004-09-09  Segher Boessenkool  <segher@kernel.crashing.org>

	* ppc-opc.c (L): Make this field not optional.

2004-09-03  Tomer Levi  <Tomer.Levi@nsc.com>

	* opc-crx.c: Rename 'popma' to 'popa', remove 'pushma'.
	Fix parameter to 'm[t|f]csr' insns.

2004-08-30  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.in: Autoupdate to autoconf 2.59.
	* aclocal.m4: Rebuild with aclocal 1.4p6.
	* configure: Rebuild with autoconf 2.59.
	* Makefile.in: Rebuild with automake 1.4p6 (picking up
	bfd changes for autoconf 2.59 on the way).
	* config.in: Rebuild with autoheader 2.59.

2004-08-27  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.[ch], frv-opc.[ch]: Regenerated.

2004-07-30  Michal Ludvig  <mludvig@suse.cz>

	* i386-dis.c (GRPPADLCK): Renamed to GRPPADLCK1
	(GRPPADLCK2): New define.
	(twobyte_has_modrm): True for 0xA6.
	(grps): GRPPADLCK2 for opcode 0xA6.

2004-07-29  Alexandre Oliva  <aoliva@redhat.com>

	Introduce SH2a support.
	* sh-opc.h (arch_sh2a_base): Renumber.
	(arch_sh2a_nofpu_base): Remove.
	(arch_sh_base_mask): Adjust.
	(arch_opann_mask): New.
	(arch_sh2a, arch_sh2a_nofpu): Adjust.
	(arch_sh2a_up, arch_sh2a_nofpu_up): Likewise.
	(sh_table): Adjust whitespace.
	2004-02-24  Corinna Vinschen  <vinschen@redhat.com>
	* sh-opc.h (arch_sh2a_nofpu_up): New.  Use instead of arch_sh2a_up in
	instruction list throughout.
	(arch_sh2a_up): Redefine to include fpu instruction set.  Use instead
	of arch_sh2a in instruction list throughout.
	(arch_sh2e_up): Accomodate above changes.
	(arch_sh2_up): Ditto.
	2004-02-20  Corinna Vinschen  <vinschen@redhat.com>
	* sh-opc.h: Add arch_sh2a_nofpu to arch_sh2_up.
	2004-02-18  Corinna Vinschen  <vinschen@redhat.com>
	* sh-dis.c (print_insn_sh): Add bfd_mach_sh2a_nofpu handling.
	* sh-opc.h (arch_sh2a_nofpu): New.
	(arch_sh2a_up): New, defines sh2a and sh2a_nofpu.
	(sh_table): Change all arch_sh2a to arch_sh2a_up unless FPU
	instruction.
	2004-01-20  DJ Delorie  <dj@redhat.com>
	* sh-dis.c (print_insn_sh): SH2A does not have 'X' fp regs.
	2003-12-29  DJ Delorie  <dj@redhat.com>
	* sh-opc.c (sh_nibble_type, sh_arg_type, arch_2a, arch_2e_up,
	sh_opcode_info, sh_table): Add sh2a support.
	(arch_op32): New, to tag 32-bit opcodes.
	* sh-dis.c (print_insn_sh): Support sh2a opcodes.
	2003-12-02  Michael Snyder  <msnyder@redhat.com>
	* sh-opc.h (arch_sh2a): Add.
	* sh-dis.c (arch_sh2a): Handle.
	* sh-opc.h (arch_sh2_up): Fix up to include arch_sh2a.

2004-07-27  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c: Add popx,pushx insns. Indent code, fix comments.

2004-07-22  Nick Clifton  <nickc@redhat.com>

	PR/280
	* h8300-dis.c (bfd_h8_disassemble): Do not dump raw bytes for the
	insns - this is done by objdump itself.
	* h8500-dis.c (print_insn_h8500): Likewise.

2004-07-21  Jan Beulich <jbeulich@novell.com>

	* i386-dis.c (OP_E): Show rip-relative addressing in 64-bit mode
	regardless of address size prefix in effect.
	(ptr_reg): Size or address registers does not depend on rex64, but
	on the presence of an address size override.
	(OP_MMX): Use rex.x only for xmm registers.
	(OP_EM): Use rex.z only for xmm registers.

2004-07-20  Maciej W. Rozycki  <macro@linux-mips.org>

	* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2
	move/branch operations to the bottom so that VR5400 multimedia
	instructions take precedence in disassembly.

2004-07-20  Maciej W. Rozycki  <macro@linux-mips.org>

	* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32
	ISA-specific "break" encoding.

2004-07-13  Elvis Chiang  <elvisfb@gmail.com>

	* arm-opc.h: Fix typo in comment.

2004-07-11  Andreas Schwab  <schwab@suse.de>

	* m68k-dis.c (m68k_valid_ea): Fix typos in last change.

2004-07-09  Andreas Schwab  <schwab@suse.de>

	* m68k-dis.c (m68k_valid_ea): Check validity of all codes.

2004-07-07  Tomer Levi  <Tomer.Levi@nsc.com>

	* Makefile.am (CFILES): Add crx-dis.c, crx-opc.c.
	(ALL_MACHINES): Add crx-dis.lo, crx-opc.lo.
	(crx-dis.lo): New target.
	(crx-opc.lo): Likewise.
	* Makefile.in: Regenerate.
	* configure.in: Handle bfd_crx_arch.
	* configure: Regenerate.
	* crx-dis.c: New file.
	* crx-opc.c: New file.
	* disassemble.c (ARCH_crx): Define.
	(disassembler): Handle ARCH_crx.

2004-06-29  James E Wilson  <wilson@specifixinc.com>

	* ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds.
	* ia64-asmtab.c: Regnerate.

2004-06-28  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf.
	(extract_fxm): Don't test dialect.
	(XFXFXM_MASK): Include the power4 bit.
	(XFXM): Add p4 param.
	(powerpc_opcodes): Add mfocrf and mtocrf.  Adjust mtcr.

2004-06-27  Alexandre Oliva  <aoliva@redhat.com>

	2003-07-21  Richard Sandiford  <rsandifo@redhat.com>
	* disassemble.c (disassembler): Handle bfd_mach_h8300sxn.

2004-06-26  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (BH, XLBH_MASK): Define.
	(powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl.

2004-06-24  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (x_mode): Comment.
	(two_source_ops): File scope.
	(float_mem): Correct fisttpll and fistpll.
	(float_mem_mode): New table.
	(dofloat): Use it.
	(OP_E): Correct intel mode PTR output.
	(ptr_reg): Use open_char and close_char.
	(PNI_Fixup): Handle possible suffix on sidt.  Use op1out etc. for
	operands.  Set two_source_ops.

2004-06-15  Alan Modra  <amodra@bigpond.net.au>

	* arc-ext.c (build_ARC_extmap): Use bfd_get_section_size
	instead of _raw_size.

2004-06-08  Jakub Jelinek  <jakub@redhat.com>

	* ia64-gen.c (in_iclass): Handle more postinc st
	and ld variants.
	* ia64-asmtab.c: Rebuilt.

2004-06-01  Martin Schwidefsky  <schwidefsky@de.ibm.com>

	* s390-opc.txt: Correct architecture mask for some opcodes.
	lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available
	in the esa mode as well.

2004-05-28  Andrew Stubbs <andrew.stubbs@superh.com>

	* sh-dis.c (target_arch): Make unsigned.
	(print_insn_sh): Replace (most of) switch with a call to
	sh_get_arch_from_bfd_mach(). Also use new architecture flags system.
	* sh-opc.h: Redefine architecture flags values.
	Add sh3-nommu architecture.
	Reorganise <arch>_up macros so they make more visual sense.
	(SH_MERGE_ARCH_SET): Define new macro.
	(SH_VALID_BASE_ARCH_SET): Likewise.
	(SH_VALID_MMU_ARCH_SET): Likewise.
	(SH_VALID_CO_ARCH_SET): Likewise.
	(SH_VALID_ARCH_SET): Likewise.
	(SH_MERGE_ARCH_SET_VALID): Likewise.
	(SH_ARCH_SET_HAS_FPU): Likewise.
	(SH_ARCH_SET_HAS_DSP): Likewise.
	(SH_ARCH_UNKNOWN_ARCH): Likewise.
	(sh_get_arch_from_bfd_mach): Add prototype.
	(sh_get_arch_up_from_bfd_mach): Likewise.
	(sh_get_bfd_mach_from_arch_set): Likewise.
	(sh_merge_bfd_arc): Likewise.

2004-05-24  Peter Barada  <peter@the-baradas.com>

	* m68k-dis.c(print_insn_m68k): Strip body of diassembly out
	into new match_insn_m68k function.  Loop over canidate
	matches and select first that completely matches.
	* m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit.
	* m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea
	to verify addressing for MAC/EMAC.
	* m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC
	reigster halves since 'fpu' and 'spl' look misleading.
	* m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases.
	* m68k-opc.c: Rearragne mac/emac cases to use longest for
	first, tighten up match masks.
	* m68k-opc.c: Add 'size' field to struct m68k_opcode.  Produce
	'size' from special case code in print_insn_m68k to
	determine decode size of insns.

2004-05-19  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as
	well as when -mpower4.

2004-05-13  Nick Clifton  <nickc@redhat.com>

	* po/fr.po: Updated French translation.

2004-05-05  Peter Barada  <peter@the-baradas.com>

	* m68k-dis.c(print_insn_m68k): Add new chips, use core
	variants in arch_mask.  Only set m68881/68851 for 68k chips.
	* m68k-op.c: Switch from ColdFire chips to core variants.

2004-05-05  Alan Modra  <amodra@bigpond.net.au>

	PR 147.
	* ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC.

2004-04-29  Ben Elliston  <bje@au.ibm.com>

	* ppc-opc.c (XCMPL): Renmame to XOPL. Update users.
	(powerpc_opcodes): Add "dbczl" instruction for PPC970.

2004-04-22  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

	* sh-dis.c (print_insn_sh): Print the value in constant pool
	as a symbol if it looks like a symbol.

2004-04-22  Peter Barada <peter@the-baradas.com>

	* m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on
	appropriate ColdFire architectures.
	(print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC
	mask addressing.
	Add EMAC instructions, fix MAC instructions. Remove
	macmw/macml/msacmw/msacml instructions since mask addressing now
	supported.

2004-04-20  Jakub Jelinek  <jakub@redhat.com>

	* sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define.
	(fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to
	suffix.  Use fmov*x macros, create all 3 fpsize variants in one
	macro.  Adjust all users.

2004-04-15  Anil Paranjpe  <anilp1@kpitcummins.com>

	* h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs"
	separately.

2004-03-30  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

	* m32r-asm.c: Regenerate.

2004-03-29  Stan Shebs  <shebs@apple.com>

	* mpw-config.in, mpw-make.sed: Remove MPW support files, no longer
	used.

2004-03-19  Alan Modra  <amodra@bigpond.net.au>

	* aclocal.m4: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
	* po/opcodes.pot: Regenerate.

2004-03-16  Alan Modra  <amodra@bigpond.net.au>

	* ppc-dis.c (print_insn_powerpc): Don't print tabs.  Handle
	PPC_OPERANDS_GPR_0.
	* ppc-opc.c (RA0): Define.
	(RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.
	(RAOPT): Rename from RAO.  Update all uses.
	(powerpc_opcodes): Use RA0 as appropriate.

2004-03-15  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg.

2004-03-15  Alan Modra  <amodra@bigpond.net.au>

	* sparc-dis.c (print_insn_sparc): Update getword prototype.

2004-03-12  Michal Ludvig  <mludvig@suse.cz>

	* i386-dis.c (GRPPLOCK): Delete.
	(grps): Delete GRPPLOCK entry.

2004-03-12  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions.
	(M, Mp): Use OP_M.
	(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
	(GRPPADLCK): Define.
	(dis386): Use NOP_Fixup on "nop".
	(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
	(twobyte_has_modrm): Set for 0xa7.
	(padlock_table): Delete.  Move to..
	(grps): ..here, using OP_0f07.  Use OP_Ofae on lfence, mfence
	and clflush.
	(print_insn): Revert PADLOCK_SPECIAL code.
	(OP_E): Delete sfence, lfence, mfence checks.

2004-03-12  Jakub Jelinek  <jakub@redhat.com>

	* i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg.
	(INVLPG_Fixup): New function.
	(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.

2004-03-12  Michal Ludvig  <mludvig@suse.cz>

	* i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines.
	(dis386_twobyte): Opcode 0xa7 is PADLOCK_0.
	(padlock_table): New struct with PadLock instructions.
	(print_insn): Handle PADLOCK_SPECIAL.

2004-03-12  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
	(OP_E): Twiddle clflush to sfence here.

2004-03-08  Nick Clifton  <nickc@redhat.com>

	* po/de.po: Updated German translation.

2003-03-03  Andrew Stubbs  <andrew.stubbs@superh.com>

	* sh-dis.c (print_insn_sh): Don't disassemble fp instructions in
	nofpu mode.  Add BFD type bfd_mach_sh4_nommu_nofpu.
	* sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions
	accordingly.

2004-03-01  Richard Sandiford  <rsandifo@redhat.com>

	* frv-asm.c: Regenerate.
	* frv-desc.c: Regenerate.
	* frv-desc.h: Regenerate.
	* frv-dis.c: Regenerate.
	* frv-ibld.c: Regenerate.
	* frv-opc.c: Regenerate.
	* frv-opc.h: Regenerate.

2004-03-01  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.c, frv-opc.c: Regenerate.

2004-03-01  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.c, frv-opc.c, frv-opc.h: Regenerate.

2004-02-26  Andrew Stubbs  <andrew.stubbs@superh.com>

	* sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4.
	Also correct mistake in the comment.

2004-02-26  Andrew Stubbs <andrew.stubbs@superh.com>

	* sh-dis.c (print_insn_sh): Add REG_N_D nibble type to
	ensure that double registers have even numbers.
	Add REG_N_B01 for nn01 (binary 01) nibble to ensure
	that reserved instruction 0xfffd does not decode the same
	as 0xfdfd (ftrv).
	* sh-opc.h: Add REG_N_D nibble type and use it whereever
	REG_N refers to a double register.
	Add REG_N_B01 nibble type and use it instead of REG_NM
	in ftrv.
	Adjust the bit patterns in a few comments.

2004-02-25  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst.

2004-02-20  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat.

2004-02-20  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add m*ivor35.

2004-02-20  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34,
	mtivor32, mtivor33, mtivor34.

2004-02-19  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add mfmcar.

2004-02-10  Petko Manolov  <petkan@nucleusys.com>

	* arm-opc.h Maverick accumulator register opcode fixes.

2004-02-13  Ben Elliston  <bje@wasabisystems.com>

	* m32r-dis.c: Regenerate.

2004-01-27  Michael Snyder  <msnyder@redhat.com>

	* sh-opc.h (sh_table): "fsrra", not "fssra".

2004-01-23  Andrew Over <andrew.over@cs.anu.edu.au>

	* sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten
	contraints.

2004-01-19  Andrew Over  <andrew.over@cs.anu.edu.au>

	* sparc-opc.c (sparc_opcodes) <f[dsq]tox, fxto[dsq]>: Fix args.

2004-01-19  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (OP_E): Print scale factor on intel mode sib when not
	1.  Don't print scale factor on AT&T mode when index missing.

2004-01-16  Alexandre Oliva  <aoliva@redhat.com>

	* m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended
	when loaded into XR registers.

2004-01-14  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.h: Regenerate.
	* frv-desc.c: Regenerate.
	* frv-opc.c: Regenerate.

2004-01-13  Michael Snyder  <msnyder@redhat.com>

	* sh-dis.c (print_insn_sh): Allocate 4 bytes for insn.

2004-01-09  Paul Brook  <paul@codesourcery.com>

	* arm-opc.h (arm_opcodes): Move generic mcrr after known
	specific opcodes.

2004-01-07  Daniel Jacobowitz  <drow@mvista.com>

	* Makefile.am (libopcodes_la_DEPENDENCIES)
	(libopcodes_la_LIBADD): Revert 2003-05-17 change.  Add explanatory
	comment about the problem.
	* Makefile.in: Regenerate.

2004-01-06  Alexandre Oliva  <aoliva@redhat.com>

	2003-12-19  Alexandre Oliva  <aoliva@redhat.com>
	* frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some
	cut&paste errors in shifting/truncating numerical operands.
	2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
	* frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo.
	(parse_uslo16): Likewise.
	(parse_uhi16): Parse gotoffhi and gotofffuncdeschi.
	(parse_d12): Parse gotoff12 and gotofffuncdesc12.
	(parse_s12): Likewise.
	2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
	* frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo.
	(parse_uslo16): Likewise.
	(parse_uhi16): Parse gothi and gotfuncdeschi.
	(parse_d12): Parse got12 and gotfuncdesc12.
	(parse_s12): Likewise.

2004-01-02  Albert Bartoszko  <albar@nt.kegel.com.pl>

	* msp430-dis.c (msp430_doubleoperand): Check for an 'add'
	instruction which looks similar to an 'rla' instruction.

For older changes see ChangeLog-0203

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: