diff options
Diffstat (limited to 'gas/config/tc-avr.h')
| -rw-r--r-- | gas/config/tc-avr.h | 138 |
1 files changed, 70 insertions, 68 deletions
diff --git a/gas/config/tc-avr.h b/gas/config/tc-avr.h index 7aff4e2f80..8a1a4eb9e3 100644 --- a/gas/config/tc-avr.h +++ b/gas/config/tc-avr.h @@ -1,5 +1,5 @@ /* This file is tc-avr.h - Copyright 1999, 2000, 2001 Free Software Foundation, Inc. + Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. Contributed by Denis Chertykov <denisc@overta.ru> @@ -24,101 +24,103 @@ #error AVR support requires BFD_ASSEMBLER #endif +/* By convention, you should define this macro in the `.h' file. For + example, `tc-m68k.h' defines `TC_M68K'. You might have to use this + if it is necessary to add CPU specific code to the object format + file. */ #define TC_AVR -/* By convention, you should define this macro in the `.h' file. For - example, `tc-m68k.h' defines `TC_M68K'. You might have to use this - if it is necessary to add CPU specific code to the object format - file. */ +/* This macro is the BFD target name to use when creating the output + file. This will normally depend upon the `OBJ_FMT' macro. */ #define TARGET_FORMAT "elf32-avr" -/* This macro is the BFD target name to use when creating the output - file. This will normally depend upon the `OBJ_FMT' macro. */ +/* This macro is the BFD architecture to pass to `bfd_set_arch_mach'. */ #define TARGET_ARCH bfd_arch_avr -/* This macro is the BFD architecture to pass to `bfd_set_arch_mach'. */ +/* This macro is the BFD machine number to pass to + `bfd_set_arch_mach'. If it is not defined, GAS will use 0. */ #define TARGET_MACH 0 -/* This macro is the BFD machine number to pass to - `bfd_set_arch_mach'. If it is not defined, GAS will use 0. */ +/* You should define this macro to be non-zero if the target is big + endian, and zero if the target is little endian. */ #define TARGET_BYTES_BIG_ENDIAN 0 -/* You should define this macro to be non-zero if the target is big - endian, and zero if the target is little endian. */ +/* If you define this macro, GAS will warn about the use of + nonstandard escape sequences in a string. */ #define ONLY_STANDARD_ESCAPES -/* If you define this macro, GAS will warn about the use of - nonstandard escape sequences in a string. */ +/* GAS will call this function for any expression that can not be + recognized. When the function is called, `input_line_pointer' + will point to the start of the expression. */ #define md_operand(x) -/* GAS will call this function for any expression that can not be - recognized. When the function is called, `input_line_pointer' - will point to the start of the expression. */ - -void avr_parse_cons_expression (expressionS *exp, int nbytes); +/* You may define this macro to parse an expression used in a data + allocation pseudo-op such as `.word'. You can use this to + recognize relocation directives that may appear in such directives. */ #define TC_PARSE_CONS_EXPRESSION(EXPR,N) avr_parse_cons_expression (EXPR,N) -/* - You may define this macro to parse an expression used in a data - allocation pseudo-op such as `.word'. You can use this to - recognize relocation directives that may appear in such directives.*/ - -void avr_cons_fix_new(fragS *frag,int where, int nbytes, expressionS *exp); +void avr_parse_cons_expression (expressionS *exp, int nbytes); +/* You may define this macro to generate a fixup for a data + allocation pseudo-op. */ #define TC_CONS_FIX_NEW(FRAG,WHERE,N,EXP) avr_cons_fix_new(FRAG,WHERE,N,EXP) -/* You may define this macro to generate a fixup for a data - allocation pseudo-op. */ +void avr_cons_fix_new(fragS *frag,int where, int nbytes, expressionS *exp); +/* This should just call either `number_to_chars_bigendian' or + `number_to_chars_littleendian', whichever is appropriate. On + targets like the MIPS which support options to change the + endianness, which function to call is a runtime decision. On + other targets, `md_number_to_chars' can be a simple macro. */ #define md_number_to_chars number_to_chars_littleendian -/* This should just call either `number_to_chars_bigendian' or - `number_to_chars_littleendian', whichever is appropriate. On - targets like the MIPS which support options to change the - endianness, which function to call is a runtime decision. On - other targets, `md_number_to_chars' can be a simple macro. */ +/* `md_short_jump_size' + `md_long_jump_size' + `md_create_short_jump' + `md_create_long_jump' + If `WORKING_DOT_WORD' is defined, GAS will not do broken word + processing (*note Broken words::.). Otherwise, you should set + `md_short_jump_size' to the size of a short jump (a jump that is + just long enough to jump around a long jmp) and + `md_long_jump_size' to the size of a long jump (a jump that can go + anywhere in the function), You should define + `md_create_short_jump' to create a short jump around a long jump, + and define `md_create_long_jump' to create a long jump. */ #define WORKING_DOT_WORD -/* -`md_short_jump_size' -`md_long_jump_size' -`md_create_short_jump' -`md_create_long_jump' - If `WORKING_DOT_WORD' is defined, GAS will not do broken word - processing (*note Broken words::.). Otherwise, you should set - `md_short_jump_size' to the size of a short jump (a jump that is - just long enough to jump around a long jmp) and - `md_long_jump_size' to the size of a long jump (a jump that can go - anywhere in the function), You should define - `md_create_short_jump' to create a short jump around a long jump, - and define `md_create_long_jump' to create a long jump. */ +/* If you define this macro, it means that `tc_gen_reloc' may return + multiple relocation entries for a single fixup. In this case, the + return value of `tc_gen_reloc' is a pointer to a null terminated + array. */ #undef RELOC_EXPANSION_POSSIBLE -/* If you define this macro, it means that `tc_gen_reloc' may return - multiple relocation entries for a single fixup. In this case, the - return value of `tc_gen_reloc' is a pointer to a null terminated - array. */ - -#define MD_PCREL_FROM_SECTION(FIXP, SEC) md_pcrel_from_section(FIXP, SEC) -/* If you define this macro, it should return the offset between the - address of a PC relative fixup and the position from which the PC - relative adjustment should be made. On many processors, the base - of a PC relative instruction is the next instruction, so this - macro would return the length of an instruction. */ +/* No shared lib support, so we don't need to ensure externally + visible symbols can be overridden. */ +#define EXTERN_FORCE_RELOC 0 + +/* Values passed to md_apply_fix3 don't include the symbol value. */ +#define MD_APPLY_SYM_VALUE(FIX) 0 + +/* If you define this macro, it should return the offset between the + address of a PC relative fixup and the position from which the PC + relative adjustment should be made. On many processors, the base + of a PC relative instruction is the next instruction, so this + macro would return the length of an instruction. */ +#define MD_PCREL_FROM_SECTION(FIX, SEC) md_pcrel_from_section(FIX, SEC) extern long md_pcrel_from_section PARAMS ((struct fix *, segT)); +/* The number of bytes to put into a word in a listing. This affects + the way the bytes are clumped together in the listing. For + example, a value of 2 might print `1234 5678' where a value of 1 + would print `12 34 56 78'. The default value is 4. */ #define LISTING_WORD_SIZE 2 -/* The number of bytes to put into a word in a listing. This affects - the way the bytes are clumped together in the listing. For - example, a value of 2 might print `1234 5678' where a value of 1 - would print `12 34 56 78'. The default value is 4. */ -#define LEX_DOLLAR 0 /* AVR port uses `$' as a logical line separator */ +#define LEX_DOLLAR 0 +/* An `.lcomm' directive with no explicit alignment parameter will + use this macro to set P2VAR to the alignment that a request for + SIZE bytes will have. The alignment is expressed as a power of + two. If no alignment should take place, the macro definition + should do nothing. Some targets define a `.bss' directive that is + also affected by this macro. The default definition will set + P2VAR to the truncated power of two of sizes up to eight bytes. */ #define TC_IMPLICIT_LCOMM_ALIGNMENT(SIZE, P2VAR) (P2VAR) = 0 -/* An `.lcomm' directive with no explicit alignment parameter will - use this macro to set P2VAR to the alignment that a request for - SIZE bytes will have. The alignment is expressed as a power of - two. If no alignment should take place, the macro definition - should do nothing. Some targets define a `.bss' directive that is - also affected by this macro. The default definition will set - P2VAR to the truncated power of two of sizes up to eight bytes. */ |
