diff options
| -rw-r--r-- | gdb/ChangeLog | 82 | ||||
| -rw-r--r-- | gdb/TODO | 8 | ||||
| -rw-r--r-- | gdb/dcache.c | 41 | ||||
| -rw-r--r-- | gdb/dcache.h | 8 | ||||
| -rw-r--r-- | gdb/monitor.c | 35 | ||||
| -rw-r--r-- | gdb/monitor.h | 1 | ||||
| -rw-r--r-- | gdb/ocd.c | 21 | ||||
| -rw-r--r-- | gdb/remote-bug.c | 15 | ||||
| -rw-r--r-- | gdb/remote-nindy.c | 23 | ||||
| -rw-r--r-- | gdb/remote-sds.c | 19 | ||||
| -rw-r--r-- | gdb/remote-utils.c | 7 | ||||
| -rw-r--r-- | gdb/remote-utils.h | 9 | ||||
| -rw-r--r-- | gdb/remote.c | 30 | ||||
| -rw-r--r-- | gdb/target.c | 97 | ||||
| -rw-r--r-- | gdb/target.h | 21 | ||||
| -rw-r--r-- | gdb/wince.c | 17 |
16 files changed, 241 insertions, 193 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index ca5db2f19b..a3d1933b0f 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,85 @@ +2000-11-01 J.T. Conklin <jtc@redback.com> + + * TODO: Note abstraction layer violation where "ocd reset" command + must invalidate the dcache, and how this might be fixed. + + * monitor.c (#include "dcache.h"): Removed. + (remote_dcache): Removed. + (monitor_open): Removed code that created local dcache. + (flush_monitor_dcache): Removed (unused function). + (monitor_resume): Removed call to dcache_invd(). + (monitor_load): Likewise. + (monitor_xfer_memory): Changed to call monitor_write_memory(), + monitor_write_memory_block(), and monitor_read_memory() instead + of dcache_xfer_memory(). + * monitor.h (flush_monitor_dcache): Removed (unused function). + * ocd.c (#include "dcache.h"): Removed. + (ocd_dcache): Removed. + (ocd_open): Removed code that created local dcache. + (ocd_resume): Removed call to dcache_invd(). + (ocd_xfer_memory): Changed to call ocd_write_bytes() and + ocd_read_bytes() instead of dcache_xfer_memory(). + (bdm_reset_command): Invalidate target dcache. + * remote-bug.c (bug_load): Remove call to dcache_invd(). + (bug_resume): Likewise. + (bug_settings): Remove dcache, readfunc, and writefunc fields + from initializer. + (bug_xfer_memory): Changed to call bug_read_memory() and + bug_write_memory() instead of dcache_xfer_memory(). + * remote-nindy.c (#include "dcache.h"): Removed. + (nindy_dcache): Removed. + (nindy_open): Removed code that created local dcache. + (nindy_resume): Removed call to dcache_invd(). + (nindy_load): Likewise. + (nindy_xfer_inferior_memory): Changed to call ninMemPut() and + ninMemGet() instead of dcache_xfer_memory(). + * remote-sds.c (#include "dcache.h"): Removed. + (sds_dcache): Removed. + (sds_open): Removed code that created local dcache. + (sds_resume): Removed call to dcache_invd(). + (sds_xfer_memory): Changed to call sds_write_bytes() and + sds_read_bytes() instead of dcache_xfer_memory(). + * remote-utils.c (gr_open): Removed code that created local dcache. + * remote-utils.h (#include "dcache.h"): Removed. + (struct gr_settings): Removed dcache, readfunc, and writefunc fields. + (gr_get_dcache, gr_set_dcache): Removed macro definitions. + * remote.c (#include "dcache.h"): Removed. + (remote_dcache): Removed. + (remote_open_1): Removed code that created local dcache. + (remote_async_open_1): Likewise. + (remote_resume): Removed call to dcache_invd(). + (remote_async_resume): Likewise. + (remote_xfer_memory): Changed to call remote_write_bytes() and + remote_read_bytes() instead of dcache_xfer_memory(). + * wince.c (#include "dcache.h"): Removed. + (remote_dcache): Removed. + (child_create_inferior): Removed code that created local dcache. + (child_xfer_memory): Changed to call remote_write_bytes() and + remote_read_bytes() instead of dcache_xfer_memory(). + (child_resume): Removed call to dcache_invd(). + + * target.c (target_dcache): Added. + (target_load): Invalidate target_dcache. + (do_xfer_memory): New function. + (target_xfer_memory): Reimplement in terms of dcache_xfer_memory(). + (target_xfer_memory_partial): Likewise. + (initialize_targets): Create target_dcache. + * target.h (#include "dcache.h"): Added. + (target_open): Invalidate target_dcache. + (target_resume): Likewise. + (do_xfer_memory): New declaration. + + * dcache.c (dcache_init): Removed reading and writing arguments. + (dcache_struct): Removed read_memory and write_memory fields. + (dcache_write_line): Call do_xfer_memory. + (dcache_read_line): Likewise. + (dcache_xfer_memory): Likewise. + (dcache_invalidate): Renamed from dcache_invd. + (dcache_init): Updated. + (dcache_xfer_memory): Updated. + * dcache.h (memxferfunc): Removed definition. + (dcache_init): Removed reading and writing arguments. + 2000-11-03 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> * objfiles.c (objfile_relocate): Relocate ei.entry_point with @@ -649,6 +649,14 @@ FPU. -- +The "ocd reset" command needs to flush the dcache, which requires breaking +the abstraction layer between the target independent and target code. One +way to address this is provide a generic "reset" command and target vector. + +http://sources.redhat.com/ml/gdb-patches/2000-10/msg00011.html + +-- + Thread Support ============== diff --git a/gdb/dcache.c b/gdb/dcache.c index 46255d9c7a..ed30eea14e 100644 --- a/gdb/dcache.c +++ b/gdb/dcache.c @@ -1,7 +1,5 @@ -/* Caching code. Typically used by remote back ends for - caching remote memory. - - Copyright 1992-1993, 1995, 1998-1999 Free Software Foundation, Inc. +/* Caching code. + Copyright 1992-1993, 1995, 1998-1999, 2000 Free Software Foundation, Inc. This file is part of GDB. @@ -25,6 +23,7 @@ #include "gdbcmd.h" #include "gdb_string.h" #include "gdbcore.h" +#include "target.h" /* The data cache could lead to incorrect results because it doesn't know @@ -126,12 +125,6 @@ struct dcache_block struct dcache_struct { - /* Function to actually read the target memory. */ - memxferfunc read_memory; - - /* Function to actually write the target memory */ - memxferfunc write_memory; - /* free list */ struct dcache_block *free_head; struct dcache_block *free_tail; @@ -175,7 +168,7 @@ DCACHE *last_cache; /* Used by info dcache */ /* Free all the data cache blocks, thus discarding all cached data. */ void -dcache_invd (DCACHE *dcache) +dcache_invalidate (DCACHE *dcache) { int i; dcache->valid_head = 0; @@ -250,10 +243,10 @@ dcache_write_line (DCACHE *dcache, register struct dcache_block *db) int done = 0; while (done < len) { - int t = dcache->write_memory (db->addr + s + done, - db->data + s + done, - len - done); - if (t == 0) + int t = do_xfer_memory (db->addr + s + done, + db->data + s + done, + len - done, 1); + if (t <= 0) return 0; done += t; } @@ -267,7 +260,6 @@ dcache_write_line (DCACHE *dcache, register struct dcache_block *db) return 1; } - /* Read cache line */ static int dcache_read_line (DCACHE *dcache, struct dcache_block *db) @@ -291,8 +283,8 @@ dcache_read_line (DCACHE *dcache, struct dcache_block *db) while (len > 0) { - res = (*dcache->read_memory) (memaddr, myaddr, len); - if (res == 0) + res = do_xfer_memory (memaddr, myaddr, len, 0); + if (res <= 0) return 0; memaddr += res; @@ -420,19 +412,17 @@ dcache_poke_byte (DCACHE *dcache, CORE_ADDR addr, char *ptr) /* Initialize the data cache. */ DCACHE * -dcache_init (memxferfunc reading, memxferfunc writing) +dcache_init (void) { int csize = sizeof (struct dcache_block) * DCACHE_SIZE; DCACHE *dcache; dcache = (DCACHE *) xmalloc (sizeof (*dcache)); - dcache->read_memory = reading; - dcache->write_memory = writing; dcache->the_cache = (struct dcache_block *) xmalloc (csize); memset (dcache->the_cache, 0, csize); - dcache_invd (dcache); + dcache_invalidate (dcache); last_cache = dcache; return dcache; @@ -481,13 +471,10 @@ dcache_xfer_memory (DCACHE *dcache, CORE_ADDR memaddr, char *myaddr, int len, } else { - memxferfunc xfunc; - xfunc = should_write ? dcache->write_memory : dcache->read_memory; - if (dcache->cache_has_stuff) - dcache_invd (dcache); + dcache_invalidate (dcache); - len = xfunc (memaddr, myaddr, len); + len = do_xfer_memory(memaddr, myaddr, len, should_write); } return len; } diff --git a/gdb/dcache.h b/gdb/dcache.h index 1615fcebbc..079b03790c 100644 --- a/gdb/dcache.h +++ b/gdb/dcache.h @@ -23,22 +23,20 @@ #ifndef DCACHE_H #define DCACHE_H -typedef int (*memxferfunc) (CORE_ADDR memaddr, char *myaddr, int len); - typedef struct dcache_struct DCACHE; /* Invalidate DCACHE. */ -void dcache_invd (DCACHE * dcache); +void dcache_invalidate (DCACHE *dcache); /* Initialize DCACHE. */ -DCACHE *dcache_init (memxferfunc reading, memxferfunc writing); +DCACHE *dcache_init (void); /* Free a DCACHE */ void dcache_free (DCACHE *); /* Simple to call from <remote>_xfer_memory */ -int dcache_xfer_memory (DCACHE * cache, CORE_ADDR mem, char *my, int len, +int dcache_xfer_memory (DCACHE *cache, CORE_ADDR mem, char *my, int len, int should_write); /* Turn dcache state on or off */ diff --git a/gdb/monitor.c b/gdb/monitor.c index 3206470bbf..dec36da698 100644 --- a/gdb/monitor.c +++ b/gdb/monitor.c @@ -51,7 +51,6 @@ #include "gdbcmd.h" #include "inferior.h" #include "gdb_regex.h" -#include "dcache.h" #include "srec.h" static char *dev_name; @@ -130,7 +129,6 @@ static char getmem_resp_delim_fastmap[256]; static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when monitor_wait wakes up. */ -static DCACHE *remote_dcache; static int first_time = 0; /* is this the first time we're executing after gaving created the child proccess? */ @@ -838,15 +836,6 @@ monitor_open (char *args, struct monitor_ops *mon_ops, int from_tty) monitor_printf (current_monitor->line_term); - if (remote_dcache) - dcache_free (remote_dcache); - - if (current_monitor->flags & MO_HAS_BLOCKWRITES) - remote_dcache = dcache_init (monitor_read_memory, - monitor_write_memory_block); - else - remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory); - start_remote (); } @@ -929,12 +918,6 @@ monitor_supply_register (int regno, char *valstr) /* Tell the remote machine to resume. */ -void -flush_monitor_dcache (void) -{ - dcache_invd (remote_dcache); -} - static void monitor_resume (int pid, int step, enum target_signal sig) { @@ -948,7 +931,6 @@ monitor_resume (int pid, int step, enum target_signal sig) dump_reg_flag = 1; return; } - dcache_invd (remote_dcache); if (step) monitor_printf (current_monitor->step); else @@ -2008,7 +1990,21 @@ static int monitor_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops *target) { - return dcache_xfer_memory (remote_dcache, memaddr, myaddr, len, write); + int res; + + if (write) + { + if (current_monitor->flags & MO_HAS_BLOCKWRITES) + res = monitor_write_memory_block(memaddr, myaddr, len); + else + res = monitor_write_memory(memaddr, myaddr, len); + } + else + { + res = monitor_read_memory(memaddr, myaddr, len); + } + + return res; } static void @@ -2145,7 +2141,6 @@ monitor_wait_srec_ack (void) static void monitor_load (char *file, int from_tty) { - dcache_invd (remote_dcache); monitor_debug ("MON load\n"); if (current_monitor->load_routine) diff --git a/gdb/monitor.h b/gdb/monitor.h index 712a4c58e7..562c19e8dd 100644 --- a/gdb/monitor.h +++ b/gdb/monitor.h @@ -246,4 +246,3 @@ extern int monitor_readchar (void); extern char *monitor_get_dev_name (void); extern void init_monitor_ops (struct target_ops *); extern int monitor_dump_reg_block (char *dump_cmd); -extern void flush_monitor_dcache (void); @@ -31,7 +31,6 @@ #include "gdbcmd.h" #include "objfiles.h" #include "gdb-stabs.h" -#include "dcache.h" #include <sys/types.h> #include <signal.h> #include "serial.h" @@ -273,8 +272,6 @@ ocd_start_remote (PTR dummy) /* Open a connection to a remote debugger. NAME is the filename used for communication. */ -static DCACHE *ocd_dcache; - void ocd_open (char *name, int from_tty, enum ocd_target_type target_type, struct target_ops *ops) @@ -292,11 +289,6 @@ device the OCD device is attached to (e.g. /dev/ttya)."); unpush_target (current_ops); - if (!ocd_dcache) - ocd_dcache = dcache_init (ocd_read_bytes, ocd_write_bytes); - else - dcache_invd (ocd_dcache); - if (strncmp (name, "wiggler", 7) == 0) { ocd_desc = SERIAL_OPEN ("ocd"); @@ -387,8 +379,6 @@ ocd_resume (int pid, int step, enum target_signal siggnal) { int pktlen; - dcache_invd (ocd_dcache); - if (step) ocd_do_command (OCD_STEP, &last_run_status, &pktlen); else @@ -772,7 +762,14 @@ int ocd_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write, struct target_ops *target) { - return dcache_xfer_memory (ocd_dcache, memaddr, myaddr, len, should_write); + int res; + + if (should_write) + res = ocd_write_bytes (memaddr, myaddr, len); + else + res = ocd_read_bytes (memaddr, myaddr, len); + + return res; } void @@ -1315,7 +1312,7 @@ bdm_reset_command (char *args, int from_tty) error ("Not connected to OCD device."); ocd_do_command (OCD_RESET, &status, &pktlen); - dcache_invd (ocd_dcache); + dcache_invalidate (target_dcache); registers_changed (); } diff --git a/gdb/remote-bug.c b/gdb/remote-bug.c index 25b769e3fa..eb18812f6f 100644 --- a/gdb/remote-bug.c +++ b/gdb/remote-bug.c @@ -119,7 +119,6 @@ bug_load (char *args, int fromtty) sr_check_open (); - dcache_invd (gr_get_dcache ()); inferior_pid = 0; abfd = bfd_openr (args, 0); if (!abfd) @@ -198,12 +197,9 @@ get_word (char **p) static struct gr_settings bug_settings = { - NULL, /* dcache */ "Bug>", /* prompt */ &bug_ops, /* ops */ bug_clear_breakpoints, /* clear_all_breakpoints */ - bug_read_memory, /* readfunc */ - bug_write_memory, /* writefunc */ gr_generic_checkin, /* checkin */ }; @@ -242,8 +238,6 @@ bug_open (char *args, int from_tty) void bug_resume (int pid, int step, enum target_signal sig) { - dcache_invd (gr_get_dcache ()); - if (step) { sr_write_cr ("t"); @@ -563,10 +557,17 @@ int bug_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops *target) { + int res; + if (len <= 0) return 0; - return dcache_xfer_memory (gr_get_dcache (), memaddr, myaddr, len, write); + if (write) + res = bug_write_memory (memaddr, myaddr, len); + else + res = bug_read_memory (memaddr, myaddr, len); + + return res; } static void diff --git a/gdb/remote-nindy.c b/gdb/remote-nindy.c index c5e0a4ab09..6428541cec 100644 --- a/gdb/remote-nindy.c +++ b/gdb/remote-nindy.c @@ -115,12 +115,8 @@ #include "serial.h" #include "nindy-share/env.h" #include "nindy-share/stop.h" - -#include "dcache.h" #include "remote-utils.h" -static DCACHE *nindy_dcache; - extern int unlink (); extern char *getenv (); extern char *mktemp (); @@ -188,11 +184,6 @@ nindy_open (char *name, /* "/dev/ttyXX", "ttyXX", or "XX": tty to be opened */ have_regs = regs_changed = 0; - if (!nindy_dcache) - nindy_dcache = dcache_init (ninMemGet, ninMemPut); - else - dcache_invd (nindy_dcache); - /* Allow user to interrupt the following -- we could hang if there's no NINDY at the other end of the remote tty. */ immediate_quit++; @@ -268,7 +259,6 @@ nindy_resume (int pid, int step, enum target_signal siggnal) if (siggnal != TARGET_SIGNAL_0 && siggnal != stop_signal) warning ("Can't send signals to remote NINDY targets."); - dcache_invd (nindy_dcache); if (regs_changed) { nindy_store_registers (-1); @@ -488,10 +478,17 @@ int nindy_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write, struct target_ops *target) { + int res; + if (len <= 0) return 0; - return dcache_xfer_memory (nindy_dcache, memaddr, myaddr, - len, should_write); + + if (should_write) + res = ninMemPut (memaddr, myaddr, len); + else + res = ninMemGet (memaddr, myaddr, len); + + return res; } static void @@ -610,8 +607,6 @@ nindy_load (char *filename, int from_tty) } } bfd_close (file); - - dcache_invd(nindy_dcache); } static int diff --git a/gdb/remote-sds.c b/gdb/remote-sds.c index 15499787da..96fa4a881e 100644 --- a/gdb/remote-sds.c +++ b/gdb/remote-sds.c @@ -37,7 +37,6 @@ #include "gdb-stabs.h" #include "gdbthread.h" #include "gdbcore.h" -#include "dcache.h" #ifdef USG #include <sys/types.h> @@ -190,8 +189,6 @@ sds_start_remote (PTR dummy) /* Open a connection to a remote debugger. NAME is the filename used for communication. */ -static DCACHE *sds_dcache; - static void sds_open (char *name, int from_tty) { @@ -203,11 +200,6 @@ device is attached to the remote system (e.g. /dev/ttya)."); unpush_target (&sds_ops); - if (!sds_dcache) - sds_dcache = dcache_init (sds_read_bytes, sds_write_bytes); - else - dcache_invd (sds_dcache); - sds_desc = SERIAL_OPEN (name); if (!sds_desc) perror_with_name (name); @@ -358,8 +350,6 @@ sds_resume (int pid, int step, enum target_signal siggnal) { unsigned char buf[PBUFSIZ]; - dcache_invd (sds_dcache); - last_sent_signal = siggnal; last_sent_step = step; @@ -669,7 +659,14 @@ static int sds_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write, struct target_ops *target) { - return dcache_xfer_memory (sds_dcache, memaddr, myaddr, len, should_write); + int res; + + if (should_write) + res = sds_write_bytes (memaddr, myaddr, len); + else + res = sds_read_bytes (memaddr, myaddr, len); + + return res; } diff --git a/gdb/remote-utils.c b/gdb/remote-utils.c index c2b833ee52..e723a5612e 100644 --- a/gdb/remote-utils.c +++ b/gdb/remote-utils.c @@ -154,19 +154,12 @@ gr_generic_checkin (void) void gr_open (char *args, int from_tty, struct gr_settings *gr) { - DCACHE *dcache; - target_preopen (from_tty); sr_scan_args (gr->ops->to_shortname, args); unpush_target (gr->ops); gr_settings = gr; - if ((dcache = gr_get_dcache()) == NULL) - gr_set_dcache (dcache_init (gr->readfunc, gr->writefunc)); - else - dcache_invd (dcache); - if (sr_get_desc () != NULL) gr_close (0); diff --git a/gdb/remote-utils.h b/gdb/remote-utils.h index 75e852a7b4..9f57068392 100644 --- a/gdb/remote-utils.h +++ b/gdb/remote-utils.h @@ -24,7 +24,6 @@ #include "serial.h" #include "target.h" -#include "dcache.h" /* Stuff that should be shared (and handled consistently) among the various remote targets. */ @@ -73,22 +72,14 @@ extern struct _sr_settings sr_settings; struct gr_settings { - /* This is our data cache. */ - DCACHE *dcache; char *prompt; struct target_ops *ops; int (*clear_all_breakpoints) (void); - memxferfunc readfunc; - memxferfunc writefunc; void (*checkin) (void); }; extern struct gr_settings *gr_settings; -/* get and set dcache. */ -#define gr_get_dcache() (gr_settings->dcache) -#define gr_set_dcache(newval) (gr_settings->dcache = (newval)) - /* get and set prompt. */ #define gr_get_prompt() (gr_settings->prompt) #define gr_set_prompt(newval) (gr_settings->prompt = (newval)) diff --git a/gdb/remote.c b/gdb/remote.c index 61a730e164..2cd3089b60 100644 --- a/gdb/remote.c +++ b/gdb/remote.c @@ -37,8 +37,6 @@ #include "gdbthread.h" #include "remote.h" -#include "dcache.h" - #include <ctype.h> #include <sys/time.h> #ifdef USG @@ -2027,8 +2025,6 @@ extended_remote_async_open (char *name, int from_tty) /* Generic code for opening a connection to a remote target. */ -static DCACHE *remote_dcache; - static void init_all_packet_configs (void) { @@ -2057,11 +2053,6 @@ serial device is attached to the remote system\n\ unpush_target (target); - if (!remote_dcache) - remote_dcache = dcache_init (remote_read_bytes, remote_write_bytes); - else - dcache_invd (remote_dcache); - remote_desc = SERIAL_OPEN (name); if (!remote_desc) perror_with_name (name); @@ -2140,8 +2131,6 @@ serial device is attached to the remote system\n\ unpush_target (target); - remote_dcache = dcache_init (remote_read_bytes, remote_write_bytes); - remote_desc = SERIAL_OPEN (name); if (!remote_desc) perror_with_name (name); @@ -2309,8 +2298,6 @@ remote_resume (int pid, int step, enum target_signal siggnal) else set_thread (pid, 0); /* run this thread */ - dcache_invd (remote_dcache); - last_sent_signal = siggnal; last_sent_step = step; @@ -2343,8 +2330,6 @@ remote_async_resume (int pid, int step, enum target_signal siggnal) else set_thread (pid, 0); /* run this thread */ - dcache_invd (remote_dcache); - last_sent_signal = siggnal; last_sent_step = step; @@ -3555,12 +3540,18 @@ remote_xfer_memory (CORE_ADDR mem_addr, char *buffer, int mem_len, { CORE_ADDR targ_addr; int targ_len; + int res; + REMOTE_TRANSLATE_XFER_ADDRESS (mem_addr, mem_len, &targ_addr, &targ_len); if (targ_len <= 0) return 0; - return dcache_xfer_memory (remote_dcache, targ_addr, buffer, - targ_len, should_write); + if (should_write) + res = remote_write_bytes (targ_addr, buffer, targ_len); + else + res = remote_read_bytes (targ_addr, buffer, targ_len); + + return res; } @@ -5044,11 +5035,6 @@ device is attached to the remote system (e.g. host:port)."); unpush_target (&remote_cisco_ops); - if (!remote_dcache) - remote_dcache = dcache_init (remote_read_bytes, remote_write_bytes); - else - dcache_invd (remote_dcache); - remote_desc = SERIAL_OPEN (name); if (!remote_desc) perror_with_name (name); diff --git a/gdb/target.c b/gdb/target.c index 4f4f8b042f..668987e6ce 100644 --- a/gdb/target.c +++ b/gdb/target.c @@ -31,6 +31,7 @@ #include "symfile.h" #include "objfiles.h" #include "gdb_wait.h" +#include "dcache.h" #include <signal.h> extern int errno; @@ -177,6 +178,8 @@ static int targetdebug = 0; static void setup_target_debug (void); +DCACHE *target_dcache; + /* The user just typed 'target' without the name of a target. */ /* ARGSUSED */ @@ -229,6 +232,7 @@ target_ignore (void) void target_load (char *arg, int from_tty) { + dcache_invalidate (target_dcache); (*current_target.to_load) (arg, from_tty); } @@ -843,11 +847,11 @@ target_write_memory (CORE_ADDR memaddr, char *myaddr, int len) Result is 0 or errno value. */ -static int -target_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write) +int +do_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write) { - int curlen; int res; + int done = 0; struct target_ops *t; struct target_stack_item *item; @@ -863,22 +867,21 @@ target_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write) res = current_target.to_xfer_memory (memaddr, myaddr, len, write, ¤t_target); if (res == len) - return 0; + return len; if (res > 0) goto bump; /* If res <= 0 then we call it again in the loop. Ah well. */ - for (; len > 0;) + while (len > 0) { - curlen = len; /* Want to do it all */ for (item = target_stack; item; item = item->next) { t = item->target_ops; if (!t->to_has_memory) continue; - res = t->to_xfer_memory (memaddr, myaddr, curlen, write, t); + res = t->to_xfer_memory (memaddr, myaddr, len, write, t); if (res > 0) break; /* Handled all or part of xfer */ if (t->to_has_all_memory) @@ -887,6 +890,34 @@ target_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write) if (res <= 0) { + return -1; + } + bump: + done += res; + memaddr += res; + myaddr += res; + len -= res; + } + + return done; +} + +static int +target_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write) +{ + int res; + + /* Zero length requests are ok and require no work. */ + if (len == 0) + { + return 0; + } + + while (len > 0) + { + res = dcache_xfer_memory(target_dcache, memaddr, myaddr, len, write); + if (res <= 0) + { /* If this address is for nonexistent memory, read zeros if reading, or do nothing if writing. Return error. */ if (!write) @@ -896,11 +927,12 @@ target_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write) else return errno; } - bump: + memaddr += res; - myaddr += res; - len -= res; + myaddr += res; + len -= res; } + return 0; /* We managed to cover it all somehow. */ } @@ -908,7 +940,7 @@ target_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write) /* Perform a partial memory transfer. */ static int -target_xfer_memory_partial (CORE_ADDR memaddr, char *buf, int len, +target_xfer_memory_partial (CORE_ADDR memaddr, char *myaddr, int len, int write_p, int *err) { int res; @@ -924,42 +956,19 @@ target_xfer_memory_partial (CORE_ADDR memaddr, char *buf, int len, return 0; } - /* The quick case is that the top target does it all. */ - res = current_target.to_xfer_memory (memaddr, buf, len, write_p, ¤t_target); - if (res > 0) + res = dcache_xfer_memory (target_dcache, memaddr, myaddr, len, write_p); + if (res <= 0) { - *err = 0; - return res; - } - - /* xfer memory doesn't always reliably set errno. */ - errno = 0; + if (errno != 0) + *err = errno; + else + *err = EIO; - /* Try all levels of the target stack to see one can handle it. */ - for (item = target_stack; item; item = item->next) - { - t = item->target_ops; - if (!t->to_has_memory) - continue; - res = t->to_xfer_memory (memaddr, buf, len, write_p, t); - if (res > 0) - { - /* Handled all or part of xfer */ - *err = 0; - return res; - } - if (t->to_has_all_memory) - break; + return -1; } - /* Total failure. Return error. */ - if (errno != 0) - { - *err = errno; - return -1; - } - *err = EIO; - return -1; + *err = 0; + return 0; } int @@ -2920,6 +2929,8 @@ When non-zero, target debugging is enabled.", &setdebuglist), add_com ("monitor", class_obscure, do_monitor_command, "Send a command to the remote monitor (remote targets only)."); + target_dcache = dcache_init(); + if (!STREQ (signals[TARGET_SIGNAL_LAST].string, "TARGET_SIGNAL_MAGIC")) abort (); } diff --git a/gdb/target.h b/gdb/target.h index 0dc3c8e6a8..98c017b067 100644 --- a/gdb/target.h +++ b/gdb/target.h @@ -43,6 +43,7 @@ #include "bfd.h" #include "symtab.h" +#include "dcache.h" enum strata { @@ -487,8 +488,11 @@ extern struct target_stack_item *target_stack; and (if successful) pushes a new target onto the stack. Targets should supply this routine, if only to provide an error message. */ -#define target_open(name, from_tty) \ - (*current_target.to_open) (name, from_tty) +#define target_open(name, from_tty) \ + do { \ + dcache_invalidate (target_dcache); \ + (*current_target.to_open) (name, from_tty); \ + } while (0) /* Does whatever cleanup is required for a target that we are no longer going to be calling. Argument says whether we are quitting gdb and @@ -560,8 +564,11 @@ extern void target_detach (char *, int); the target, or TARGET_SIGNAL_0 for no signal. The caller may not pass TARGET_SIGNAL_DEFAULT. */ -#define target_resume(pid, step, siggnal) \ - (*current_target.to_resume) (pid, step, siggnal) +#define target_resume(pid, step, siggnal) \ + do { \ + dcache_invalidate(target_dcache); \ + (*current_target.to_resume) (pid, step, siggnal); \ + } while (0) /* Wait for process pid to do something. Pid = -1 to wait for any pid to do something. Return pid of child, or -1 in case of error; @@ -608,11 +615,15 @@ extern void target_detach (char *, int); #define target_prepare_to_store() \ (*current_target.to_prepare_to_store) () +extern DCACHE *target_dcache; + +extern int do_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write); + extern int target_read_string (CORE_ADDR, char **, int, int *); extern int target_read_memory (CORE_ADDR memaddr, char *myaddr, int len); -extern int target_write_memory (CORE_ADDR, char *, int); +extern int target_write_memory (CORE_ADDR memaddr, char *myaddr, int len); extern int xfer_memory (CORE_ADDR, char *, int, int, struct target_ops *); diff --git a/gdb/wince.c b/gdb/wince.c index 7081dd2fd5..381cfdabeb 100644 --- a/gdb/wince.c +++ b/gdb/wince.c @@ -54,7 +54,6 @@ #include "gdbcmd.h" #include <sys/param.h> #include "wince-stub.h" -#include "dcache.h" #include <time.h> /* The ui's event loop. */ @@ -89,8 +88,6 @@ extern int (*ui_loop_hook) (int signo); static int connection_initialized = 0; /* True if we've initialized a RAPI session. */ -static DCACHE *remote_dcache; - /* The directory where the stub and executable files are uploaded. */ static const char *remote_directory = "\\gdb"; @@ -1729,10 +1726,6 @@ child_create_inferior (char *exec_file, char *args, char **env) flags = DEBUG_PROCESS; wince_initialize (); /* Make sure we've got a connection. */ - if (!remote_dcache) - remote_dcache = dcache_init (remote_read_bytes, remote_write_bytes); - else - dcache_invd (remote_dcache); exec_file = upload_to_device (exec_file, exec_file); @@ -1798,7 +1791,13 @@ child_xfer_memory (CORE_ADDR memaddr, char *our, int len, { if (len <= 0) return 0; - return dcache_xfer_memory (remote_dcache, memaddr, our, len, write); + + if (write) + res = remote_write_bytes (memaddr, our, len); + else + res = remote_read_bytes (memaddr, our, len); + + return res; } /* Terminate the process and wait for child to tell us it has completed. */ @@ -1842,8 +1841,6 @@ child_resume (int pid, int step, enum target_signal sig) th->context.ContextFlags = 0; } - dcache_invd (remote_dcache); - /* Allow continuing with the same signal that interrupted us. Otherwise complain. */ if (sig && sig != last_sig) |
