Regenerate using autoconf 2.13.

2 files changed, 105 insertions, 29 deletions

diff --git a/sim/testsuite/d30v-elf/ChangeLog b/sim/testsuite/d30v-elf/ChangeLog
index 98e5877e96..863dc23bdb 100644
--- a/sim/testsuite/d30v-elf/ChangeLog
+++ b/sim/testsuite/d30v-elf/ChangeLog
@@ -1,3 +1,7 @@
+2001-07-18  Andrew Cagney  <ac131313@redhat.com>
+
+	* configure: Re-generate using autoconf 2.13.
+
 1999-03-17  Frank Ch. Eigler  <fche@cygnus.com>
 
 	* do-flags.S: Added new test for non-lkr status of MVTSYS.
diff --git a/sim/testsuite/d30v-elf/configure b/sim/testsuite/d30v-elf/configure
index 94518a0c16..25c27936dc 100755
--- a/sim/testsuite/d30v-elf/configure
+++ b/sim/testsuite/d30v-elf/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.10 
+# Generated automatically using autoconf version 2.13 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -49,6 +49,9 @@ mandir='${prefix}/man'
 # Initialize some other variables.
 subdirs=
 MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
 
 ac_prev=
 for ac_option
@@ -330,7 +333,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.10"
+    echo "configure generated by autoconf version 2.13"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -432,11 +435,14 @@ do
 done
 
 # NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
 if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
 rm -rf conftest* confdefs.h
@@ -497,8 +503,11 @@ ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
 
+ac_exeext=
+ac_objext=o
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
   if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
@@ -557,31 +566,33 @@ esac
 
 
 # Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:575: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
 NONE)
   case $nonopt in
   NONE)
-    if host_alias=`$ac_config_guess`; then :
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
   *) host_alias=$nonopt ;;
   esac ;;
 esac
 
-host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:596: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -592,13 +603,14 @@ NONE)
   esac ;;
 esac
 
-target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:614: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -609,10 +621,10 @@ NONE)
   esac ;;
 esac
 
-build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$build" 1>&6
 
 test "$host_alias" != "$target_alias" &&
@@ -623,6 +635,7 @@ test "$host_alias" != "$target_alias" &&
 
 
 
+
 trap '' 1 2 15
 cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
@@ -640,11 +653,25 @@ cat > confcache <<\EOF
 # --recheck option to rerun configure.
 #
 EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
-  >> confcache
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
 if cmp -s $cache_file confcache; then
   :
 else
@@ -711,7 +738,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.10"
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -730,9 +757,11 @@ sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
  s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
 $ac_vpsub
 $extrasub
+s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
 s%@DEFS@%$DEFS%g
 s%@LDFLAGS@%$LDFLAGS%g
 s%@LIBS@%$LIBS%g
@@ -770,20 +799,56 @@ s%@build_os@%$build_os%g
 
 CEOF
 EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
 cat >> $CONFIG_STATUS <<EOF
 
 CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
 EOF
 cat >> $CONFIG_STATUS <<\EOF
 for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile]", defaulting infile="outfile.in".
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
        ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
   *) ac_file_in="${ac_file}.in" ;;
   esac
 
-  # Adjust relative srcdir, etc. for subdirectories.
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
 
   # Remove last slash and all that follows it.  Not all systems have dirname.
   ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
@@ -807,6 +872,7 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
     top_srcdir="$ac_dots$ac_given_srcdir" ;;
   esac
 
+
   echo creating "$ac_file"
   rm -f "$ac_file"
   configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
@@ -815,15 +881,21 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
 # $configure_input" ;;
   *) ac_comsub= ;;
   esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
   sed -e "$ac_comsub
 s%@configure_input@%$configure_input%g
 s%@srcdir@%$srcdir%g
 s%@top_srcdir@%$top_srcdir%g
-" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
 fi; done
-rm -f conftest.subs
+rm -f conftest.s*
 
+EOF
+cat >> $CONFIG_STATUS <<EOF
 
+EOF
+cat >> $CONFIG_STATUS <<\EOF
 
 exit 0
 EOF