gas/

2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (December, 2008)
	* config/tc-i386.c (build_modrm_byte): Remove 5 operand instruction
	support.  Don't swap REG and NDS for FMA.

gas/testsuite/

2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (December, 2008)
	* gas/i386/arch-10.s: Replace vfmaddpd with vfmadd132pd.
	* gas/i386/x86-64-arch-2.s: Likewise.

	* gas/i386/arch-10.d: Updated.
	* gas/i386/arch-10-1.l: Likewise.
	* gas/i386/arch-10-2.l: Likewise.
	* gas/i386/arch-10-3.l: Likewise.
	* gas/i386/arch-10-4.l: Likewise.
	* gas/i386/avx.d: Likewise.
	* gas/i386/avx-intel.d: Likewise.
	* gas/i386/inval-avx.l: Likewise.
	* gas/i386/x86-64-arch-2.d: Likewise.
	* gas/i386/x86-64-avx.d: Likewise.
	* gas/i386/x86-64-avx-intel.d: Likewise.
	* gas/i386/x86-64-inval-avx.l: Likewise.

	* gas/i386/avx.s: Remove vpermil2ps/vpermil2pd and FMA
	instructions.  Update tests.
	* gas/i386/inval-avx.s: Likewise.
	* gas/i386/x86-64-avx.s: Likewise.
	* gas/i386/x86-64-inval-avx.s: Likewise.

	* gas/i386/fma.d: New.
	* gas/i386/fma.s: Likewise.
	* gas/i386/fma-intel.d: Likewise.
	* gas/i386/x86-64-fma.d: Likewise.
	* gas/i386/x86-64-fma.s: Likewise.
	* gas/i386/x86-64-fma-intel.d: Likewise.

	* gas/i386/i386.exp: Run fma, fma-intel, x86-64-fma and
	x86-64-fma-intel.

opcodes/

2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (December, 2008)
	* i386-dis.c (OP_VEX_FMA): Removed.
	(OP_EX_VexW): Likewise.
	(OP_EX_VexImmW): Likewise.
	(OP_XMM_VexW): Likewise.
	(VEXI4_Fixup): Likewise.
	(VPERMIL2_Fixup): Likewise.
	(VexI4): Likewise.
	(VexFMA): Likewise.
	(Vex128FMA): Likewise.
	(EXVexW): Likewise.
	(EXdVexW): Likewise.
	(EXqVexW): Likewise.
	(EXVexImmW): Likewise.
	(XMVexW): Likewise.
	(VPERMIL2): Likewise.
	(PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
	(PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
	(PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
	(PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
	(VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
	(VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
	(get_vex_imm8): Likewise.
	(OP_EX_VexReg): Likewise.
	vpermil2_op): Likewise.
	(EXVexWdq): New.
	(vex_w_dq_mode): Likewise.
	(PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
	(PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
	(PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
	(es_reg): Updated.
	(PREFIX_VEX_38DB): Likewise.
	(PREFIX_VEX_3A4A): Likewise.
	(PREFIX_VEX_3A60): Likewise.
	(PREFIX_VEX_3ADF): Likewise.
	(VEX_LEN_3ADF_P_2): Likewise.
	(prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
	PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
	PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
	PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
	PREFIX_VEX_3896...PREFIX_VEX_389F,
	PREFIX_VEX_38A6...PREFIX_VEX_38AF and
	PREFIX_VEX_38B6...PREFIX_VEX_38BF.
	(vex_table): Likewise.
	(vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
	and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
	(putop): Support "%XW".
	(intel_operand_size): Handle vex_w_dq_mode.

	* i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.

	* i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
	instructions.  Add new FMA instructions.
	* i386-tbl.h: Regenerated.

1 files changed, 1204 insertions, 0 deletions

diff --git a/opcodes/ChangeLog-2008 b/opcodes/ChangeLog-2008
new file mode 100644
index 0000000000..4b4f7ba642
--- /dev/null
+++ b/opcodes/ChangeLog-2008
@@ -0,0 +1,1204 @@
+2008-12-30  Martin Schwidefsky  <schwidefskyy@de.ibm.com>
+
+	* s390-opc.txt: Add ptff instruction.
+
+2008-12-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
+
+	* Makefile.am (CFILES, ALL_MACHINES): Add LM32 source and object files.
+	* Makefile.in: Regenerate.
+
+2008-12-23  Jon Beniston <jon@beniston.com>
+
+	* Makefile.am: Add LM32 object files and dependencies.
+	* Makefile.in: Regenerate.
+	* configure.in: Add LM32 target.
+	* configure: Regenerate.
+	* disassemble.c: Add LM32 disassembler.
+	* cgen-asm.in: Update copyright year.
+	* cgen-dis.in: Update copyright year.
+	* cgen-ibld.in: Update copyright year.
+	* lm32-asm.c: New file.
+	* lm32-desc.c: New file.
+	* lm32-desc.h: New file.
+	* lm32-dis.c: New file.
+	* lm32-ibld.c: New file.
+	* lm32-opc.c: New file.
+	* lm32-opc.h: New file.
+	* lm32-opinst.c: New file.
+
+2008-12-23  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (EXdS): New.
+	(EXdVexS): Likewise.
+	(EXqVexS): Likewise.
+	(d_swap_mode): Likewise.
+	(q_mode): Updated.
+	(prefix_table): Use EXdS on movss and EXqS on movsd.
+	(vex_len_table): Use EXdVexS on vmovss and EXqVexS on vmovsd.
+	(intel_operand_size): Handle d_swap_mode.
+	(OP_EX): Likewise.
+
+	* i386-opc.h (S): Update comments.
+
+	* i386-opc.tbl: Add S to movss, movsd, vmovss and vmovsd.
+	* i386-tbl.h: Regenerated.
+
+2008-12-23  Nick Clifton  <nickc@redhat.com>
+
+	* po/ga.po: Updated Irish translation.
+
+2008-12-20  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (EbS): New.
+	(EvS): Likewise.
+	(EMS): Likewise.
+	(EXqS): Likewise.
+	(EXxS): Likewise.
+	(b_swap_mode): Likewise.
+	(v_swap_mode): Likewise.
+	(q_swap_mode): Likewise.
+	(x_swap_mode): Likewise.
+	(v_mode): Updated.
+	(w_mode): Likewise.
+	(t_mode): Likewise.
+	(xmm_mode): Likewise.
+	(swap_operand): Likewise.
+	(dis386): Use EbS on movB.  Use EvS on moveS.
+	(dis386_twobyte): Use EXxS on movapX.
+	(prefix_table): Use EXxS on movups, movupd, movdqu, movdqa,
+	vmovups, vmovdqu, vmovdqa. Use EMS and EXqS on movq.
+	(vex_table): Use EXxS on vmovapX.
+	(vex_len_table): Use EXqS on vmovq.
+	(intel_operand_size): Handle b_swap_mode, v_swap_mode,
+	q_swap_mode and x_swap_mode.
+	(OP_E_register): Handle b_swap_mode and v_swap_mode.
+	(OP_EM): Handle v_swap_mode.
+	(OP_EX): x_swap_mode and q_swap_mode.
+
+	* i386-gen.c (opcode_modifiers): Add S.
+
+	* i386-opc.h (S): New.
+	(Modrm): Updated.
+	(i386_opcode_modifier): Add s.
+
+	* i386-opc.tbl: Add S to movapd, movaps, movdqa, movdqu, movq,
+	movupd, movups, vmovapd, vmovaps, vmovdqa, vmovdqu and vmovq.
+	* i386-tbl.h: Regenerated.
+
+2008-12-18  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (mnemonicendp): New.
+	(op): Likewise.
+	(print_insn): Use mnemonicendp.
+	(OP_3DNowSuffix): Likewise.
+	(CMP_Fixup): Likewise.
+	(CMPXCHG8B_Fixup): Likewise.
+	(CRC32_Fixup): Likewise.
+	(OP_DREX_FCMP): Likewise.
+	(OP_DREX_ICMP): Likewise.
+	(VZERO_Fixup): Likewise.
+	(VCMP_Fixup): Likewise.
+	(PCLMUL_Fixup): Likewise.
+	(VPERMIL2_Fixup): Likewise.
+	(MOVBE_Fixup): Likewise.
+	(putop): Update mnemonicendp.
+	(oappend): Use stpcpy.
+	(simd_cmp_op): Changed to struct op.
+	(vex_cmp_op): Likewise.
+	(pclmul_op): Likewise.
+	(vpermil2_op): Likewise.
+
+2008-12-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* configure: Regenerate.
+
+2008-12-15  Richard Earnshaw  <rearnsha@arm.com>
+
+	* arm-dis.c (coprocessor_opcodes): Disassemble VFP instructions using
+	unified syntax.
+
+2008-12-08  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (opcode_modifiers): Move VexNDS before VexNDD.
+
+2008-12-08  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (putop): Remove strayed comments.
+
+2008-12-04  Ben Elliston  <bje@au.ibm.com>
+
+	* ppc-dis.c (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
+	for -Mbooke.
+	(print_ppc_disassembler_options): Update usage.
+	* ppc-opc.c (DE, DES, DEO, DE_MASK): Remove.
+	(BOOKE64): Remove.
+	(PPCCHLK64): Likewise.
+	(powerpc_opcodes): Remove all BOOKE64 instructions.
+
+2008-11-28  Joshua Kinard  <kumba@gentoo.org>
+
+	* mips-dis.c (mips_arch_choices): Add r14000, r16000.
+
+2008-11-27  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
+
+	* cr16-dis.c (match_opcode): Truncate mcode to 32 bit and
+	adjusted the mask for 32-bit branch instruction.
+
+2008-11-27  Alan Modra  <amodra@bigpond.net.au>
+
+	* ppc-opc.c (extract_sprg): Correct operand range check.
+
+2008-11-26  Andreas Schwab  <schwab@suse.de>
+
+	* m68k-dis.c (NEXTBYTE, NEXTWORD, NEXTLONG, NEXTULONG, NEXTSINGLE)
+	(NEXTDOUBLE, NEXTEXTEND, NEXTPACKED): Fix error handling.
+	(save_printer, save_print_address): Remove.
+	(fetch_data): Don't use them.
+	(match_insn_m68k): Always restore printing functions.
+	(print_insn_m68k): Don't save/restore printing functions.
+
+2008-11-25  Nick Clifton  <nickc@redhat.com>
+
+	* m68k-dis.c: Rewrite to remove use of setjmp/longjmp.
+
+2008-11-18  Catherine Moore  <clm@codesourcery.com>
+
+	* arm-dis.c (coprocessor_opcodes): Add half-precision vcvt
+	instructions.
+	(neon_opcodes): Likewise.
+	(print_insn_coprocessor): Print 't' or 'b' for vcvt
+	instructions.
+
+2008-11-14  Tristan Gingold  <gingold@adacore.com>
+
+	* makefile.vms (OBJS): Update list of objects.
+	(DEFS): Update
+	(CFLAGS): Update.
+
+2008-11-06  Chao-ying Fu  <fu@mips.com>
+
+	* mips-opc.c (synciobdma, syncs, syncw, syncws): Move these
+	before sync.
+	(sync): New instruction with 5-bit sync type.
+	* mips-dis.c (print_insn_args): Add case '1' to print 5-bit values.
+
+2008-11-06  Nick Clifton  <nickc@redhat.com>
+
+	* avr-dis.c: Replace uses of sprintf without a format string with
+	calls to strcpy.
+
+2008-11-03  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Add cmovpe and cmovpo.
+	* i386-tbl.h: Regenerated.
+
+2008-10-22  Nick Clifton  <nickc@redhat.com>
+
+	PR 6937
+	* configure.in (SHARED_LIBADD): Revert previous change.
+	Add a comment explaining why.
+	(SHARED_DEPENDENCIES): Revert previous change.
+	* configure: Regenerate.
+
+2008-10-10  Nick Clifton  <nickc@redhat.com>
+
+	PR 6937
+	* configure.in (SHARED_LIBADD): Add libiberty.a.
+	(SHARED_DEPENDENCIES): Add libiberty.a.
+
+2008-09-30  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c: Include "hashtab.h".
+	(next_field): Take a new argument, last.  Check last.
+	(process_i386_cpu_flag): Updated.
+	(process_i386_opcode_modifier): Likewise.
+	(process_i386_operand_type): Likewise.
+	(process_i386_registers): Likewise.
+	(output_i386_opcode): New.
+	(opcode_hash_entry): Likewise.
+	(opcode_hash_table): Likewise.
+	(opcode_hash_hash): Likewise.
+	(opcode_hash_eq): Likewise.
+	(process_i386_opcodes): Use opcode hash table and opcode array.
+
+2008-09-30  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
+
+	* s390-opc.txt (stdy, stey): Fix description
+
+2008-09-30  Alan Modra  <amodra@bigpond.net.au>
+
+	* Makefile.am: Run "make dep-am".
+	* Makefile.in: Regenerate.
+
+2008-09-29  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* aclocal.m4: Regenerated.
+	* configure: Likewise.
+	* Makefile.in: Likewise.
+
+2008-09-29  Nick Clifton  <nickc@redhat.com>
+
+	* po/vi.po: Updated Vietnamese translation.
+	* po/fr.po: Updated French translation.
+
+2008-09-26  Florian Krohm  <fkrohm@us.ibm.com>
+
+	* s390-opc.txt (thder, thdr): Change RRE_RR to RRE_FF.
+	(cfxr, cfdr, cfer, clclu): Add esa flag.
+	(sqd): Instruction added.
+	(qadtr, qaxtr): Change RRF_FFFU to RRF_FUFF.
+	* s390-opc.c: (INSTR_RRF_FFFU, MASK_RRF_FFFU): Removed.
+
+2008-09-14  Arnold Metselaar  <arnold.metselaar@planet.nl>
+
+	* z80-dis.c (prt_rr_nn): Fix register pair for two byte opcodes.
+	(tab_elt opc_ed): Add "ld r,a" and "ld r,a" instructions.
+
+2008-09-11  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Fix memory operand size for cmpXXXs[sd].
+	* i386-tbl.h: Regenerated.
+
+2008-08-28  Jan Beulich  <jbeulich@novell.com>
+
+	* i386-dis.c (dis386): Adjust far return mnemonics.
+	* i386-opc.tbl: Add retf.
+	* i386-tbl.h: Re-generate.
+
+2008-08-28  Jan Beulich  <jbeulich@novell.com>
+
+	* i386-dis.c (dis386_twobyte): Adjust cmovXX mnemonics.
+
+2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* ia64-dis.c (print_insn_ia64): Handle cr.iib0 and cr.iib1.
+	* ia64-gen.c (lookup_specifier): Likewise.
+
+	* ia64-ic.tbl: Add support for cr.iib0 and cr.iib1.
+	* ia64-raw.tbl: Likewise.
+	* ia64-waw.tbl: Likewise.
+	* ia64-asmtab.c: Regenerated.
+
+2008-08-27  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Correct fidivr operand size.
+
+	* i386-tbl.h: Regenerated.
+
+2008-08-24  Alan Modra  <amodra@bigpond.net.au>
+
+	* configure.in: Update a number of obsolete autoconf macros.
+	* aclocal.m4: Regenerate.
+
+2008-08-20  H.J. Lu  <hongjiu.lu@intel.com>
+
+	AVX Programming Reference (August, 2008)
+	* i386-dis.c (PREFIX_VEX_38DB): New.
+	(PREFIX_VEX_38DC): Likewise.
+	(PREFIX_VEX_38DD): Likewise.
+	(PREFIX_VEX_38DE): Likewise.
+	(PREFIX_VEX_38DF): Likewise.
+	(PREFIX_VEX_3ADF): Likewise.
+	(VEX_LEN_38DB_P_2): Likewise.
+	(VEX_LEN_38DC_P_2): Likewise.
+	(VEX_LEN_38DD_P_2): Likewise.
+	(VEX_LEN_38DE_P_2): Likewise.
+	(VEX_LEN_38DF_P_2): Likewise.
+	(VEX_LEN_3ADF_P_2): Likewise.
+	(PREFIX_VEX_3A04): Updated.
+	(VEX_LEN_3A06_P_2): Likewise.
+	(prefix_table): Add PREFIX_VEX_38DB, PREFIX_VEX_38DC,
+	PREFIX_VEX_38DD, PREFIX_VEX_38DE and PREFIX_VEX_3ADF.
+	(x86_64_table): Likewise.
+	(vex_len_table): Add VEX_LEN_38DB_P_2, VEX_LEN_38DC_P_2,
+	VEX_LEN_38DD_P_2, VEX_LEN_38DE_P_2, VEX_LEN_38DF_P_2 and
+	VEX_LEN_3ADF_P_2.
+
+	* i386-opc.tbl: Add AES + AVX instructions.
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-08-15  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
+
+	* s390-opc.c (INSTR_RRF_FFRU, MASK_RRF_FFRU): New instruction format.
+	* s390-opc.txt (lxr, rrdtr, rrxtr): Fix instruction format.
+
+2008-08-15  Alan Modra  <amodra@bigpond.net.au>
+
+	PR 6526
+	* configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
+	* Makefile.in: Regenerate.
+	* aclocal.m4: Regenerate.
+	* config.in: Regenerate.
+	* configure: Regenerate.
+
+2008-08-14  Sebastian Huber  <sebastian.huber@embedded-brains.de>
+
+	PR 6825
+	* ppc-opc.c (powerpc_opcodes): Enable rfci, mfpmr, mtpmr for e300.
+
+2008-08-12  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Add syscall and sysret for Cpu64.
+
+	* i386-tbl.h: Regenerated.
+
+2008-08-04  Alan Modra  <amodra@bigpond.net.au>
+
+	* Makefile.am (POTFILES.in): Set LC_ALL=C.
+	* Makefile.in: Regenerate.
+	* po/POTFILES.in: Regenerate.
+
+2008-08-01  Peter Bergner  <bergner@vnet.ibm.com>
+
+	* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
+	(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
+	(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
+	* ppc-opc.c (insert_xt6): New static function.
+	(extract_xt6): Likewise.
+	(insert_xa6): Likewise.
+	(extract_xa6: Likewise.
+	(insert_xb6): Likewise.
+	(extract_xb6): Likewise.
+	(insert_xb6s): Likewise.
+	(extract_xb6s): Likewise.
+	(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
+	XX3DM_MASK, PPCVSX): New.
+	(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
+	"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
+
+2008-08-01  Pedro Alves  <pedro@codesourcery.com>
+
+	* Makefile.am ($(srcdir)/ia64-asmtab.c): Remove line continuation.
+	* Makefile.in: Regenerate.
+
+2008-08-01  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-reg.tbl: Use Dw2Inval on AVX registers.
+	* i386-tbl.h: Regenerated.
+
+2008-07-30  Michael J. Eager  <eager@eagercon.com>
+
+	* ppc-dis.c (print_insn_powerpc): Disassemble FSL/FCR/UDI fields.
+	* ppc-opc.c (powerpc_operands): Add Xilinx APU related operands.
+	(insert_sprg, PPC405): Use PPC_OPCODE_405.
+	(powerpc_opcodes): Add Xilinx APU related opcodes.
+
+2008-07-30  Alan Modra  <amodra@bigpond.net.au>
+
+	* bfin-dis.c, cris-dis.c, i386-dis.c, or32-opc.c: Silence gcc warnings.
+
+2008-07-10  Richard Sandiford  <rdsandiford@googlemail.com>
+
+	* mips-dis.c (_print_insn_mips): Use ELF_ST_IS_MIPS16.
+
+2008-07-07  Adam Nemet  <anemet@caviumnetworks.com>
+
+	* mips-opc.c (CP): New macro.
+	(mips_builtin_opcodes): Mark c0, c2 and c3 as CP.  Add Octeon to the
+	membership of di, dmfc0, dmtc0, ei, mfc0 and mtc0.  Add dmfc2 and
+	dmtc2 Octeon instructions.
+
+2008-07-07  Stan Shebs  <stan@codesourcery.com>
+
+	* dis-init.c (init_disassemble_info): Init endian_code field.
+	* arm-dis.c (print_insn): Disassemble code according to
+	setting of endian_code.
+	(print_insn_big_arm): Detect when BE8 extension flag has been set.
+
+2008-06-30  Richard Sandiford  <rdsandiford@googlemail.com>
+
+	* mips-dis.c (_print_insn_mips): Use bfd_asymbol_flavour to check
+	for ELF symbols.
+
+2008-06-25  Peter Bergner  <bergner@vnet.ibm.com>
+
+	* ppc-dis.c (powerpc_init_dialect): Handle -M464.
+	(print_ppc_disassembler_options): Likewise.
+	* ppc-opc.c (PPC464): Define.
+	(powerpc_opcodes): Add mfdcrux and mtdcrux.
+
+2008-06-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* configure: Regenerate.
+
+2008-06-13  Peter Bergner  <bergner@vnet.ibm.com>
+
+	* ppc-dis.c (print_insn_powerpc): Update prototye to use new
+	ppc_cpu_t typedef.
+	(struct dis_private): New.
+	(POWERPC_DIALECT): New define.
+	(powerpc_dialect): Renamed to...
+	(powerpc_init_dialect): This.  Update to use ppc_cpu_t and
+	struct dis_private.
+	(print_insn_big_powerpc): Update for using structure in
+	info->private_data.
+	(print_insn_little_powerpc): Likewise.
+	(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
+	(skip_optional_operands): Likewise.
+	(print_insn_powerpc): Likewise.  Remove initialization of dialect.
+	* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
+	extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
+	extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
+	extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
+	insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
+	insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
+	insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
+	param to be of type ppc_cpu_t.  Update prototype.
+
+2008-06-12  Adam Nemet  <anemet@caviumnetworks.com>
+
+	* mips-dis.c (print_insn_args): Handle field descriptors +x, +p,
+	+s, +S.
+	* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions
+	baddu, bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs,
+	syncw, syncws, vm3mulu, vm0 and vmulu.
+
+	* mips-dis.c (print_insn_args): Handle field descriptor +Q.
+	* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
+	seqi, sne and snei.
+
+2008-05-30  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Add vmovd with 64bit operand.
+	* i386-tbl.h: Regenerated.
+
+2008-05-27  Martin Schwidefsky  <schwidefsky@de.ibm.com>
+
+	* s390-opc.c (INSTR_RRF_R0RR): Fix RRF_R0RR operand format.
+
+2008-05-22  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Add NoAVX to cvtpd2pi, cvtpi2pd and cvttpd2pi.
+	* i386-tbl.h: Regenerated.
+
+2008-05-22  H.J. Lu  <hongjiu.lu@intel.com>
+
+	PR gas/6517
+	* i386-opc.tbl: Break cvtsi2ss/cvtsi2sd/vcvtsi2sd/vcvtsi2ss
+	into 32bit and 64bit.  Remove Reg64|Qword and add
+	IgnoreSize|No_qSuf on 32bit version.
+	* i386-tbl.h: Regenerated.
+
+2008-05-21  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Add NoAVX to movdq2q and movq2dq.
+	* i386-tbl.h: Regenerated.
+
+2008-05-21  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
+
+	* cr16-dis.c (build_mask): Adjust the mask for 32-bit bcond.
+
+2008-05-14  Alan Modra  <amodra@bigpond.net.au>
+
+	* Makefile.am: Run "make dep-am".
+	* Makefile.in: Regenerate.
+
+2008-05-02  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (MOVBE_Fixup): New.
+	(Mo): Likewise.
+	(PREFIX_0F3880): Likewise.
+	(PREFIX_0F3881): Likewise.
+	(PREFIX_0F38F0): Updated.
+	(prefix_table): Add PREFIX_0F3880 and PREFIX_0F3881.  Update
+	PREFIX_0F38F0 and PREFIX_0F38F1 for movbe.
+	(three_byte_table): Use PREFIX_0F3880 and PREFIX_0F3881.
+
+	* i386-gen.c (cpu_flag_init): Add CPU_MOVBE_FLAGS and
+	CPU_EPT_FLAGS.
+	(cpu_flags): Add CpuMovbe and CpuEPT.
+
+	* i386-opc.h (CpuMovbe): New.
+	(CpuEPT): Likewise.
+	(CpuLM): Updated.
+	(i386_cpu_flags): Add cpumovbe and cpuept.
+
+	* i386-opc.tbl: Add entries for movbe and EPT instructions.
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-04-29  Adam Nemet  <anemet@caviumnetworks.com>
+
+	* mips-opc.c (mips_builtin_opcodes): Set field `match' to 0 for
+	the two drem and the two dremu macros.
+
+2008-04-28  Adam Nemet  <anemet@caviumnetworks.com>
+
+	* mips-opc.c (mips_builtin_opcodes): Mark prefx and c1
+	instructions FP_S.  Mark l.s, li.s, lwc1, swc1, s.s, trunc.w.s and
+	cop1 macros INSN2_M_FP_S.  Mark l.d, li.d, ldc1 and sdc1 macros
+	INSN2_M_FP_D.  Mark trunc.w.d macro INSN2_M_FP_S and INSN2_M_FP_D.
+
+2008-04-25  David S. Miller  <davem@davemloft.net>
+
+	* sparc-dis.c: Emit %stick instead of %sys_tick, and %stick_cmpr
+	instead of %sys_tick_cmpr, as suggested in architecture manuals.
+
+2008-04-23  Paolo Bonzini  <bonzini@gnu.org>
+
+	* aclocal.m4: Regenerate.
+	* configure: Regenerate.
+
+2008-04-23  David S. Miller  <davem@davemloft.net>
+
+	* sparc-opc.c (asi_table): Add UltraSPARC and Niagara
+	extended values.
+	(prefetch_table): Add missing values.
+
+2008-04-22  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (opcode_modifiers): Add NoAVX.
+
+	* i386-opc.h (NoAVX): New.
+	(OldGcc): Updated.
+	(i386_opcode_modifier): Add noavx.
+
+	* i386-opc.tbl: Add NoAVX to SSE, SSE2, SSE3 and SSSE3
+	instructions which don't have AVX equivalent.
+	* i386-tbl.h: Regenerated.
+
+2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (OP_VEX_FMA): New.
+	(OP_EX_VexImmW): Likewise.
+	(VexFMA): Likewise.
+	(Vex128FMA): Likewise.
+	(EXVexImmW): Likewise.
+	(get_vex_imm8): Likewise.
+	(OP_EX_VexReg): Likewise.
+	(vex_i4_done): Renamed to ...
+	(vex_w_done): This.
+	(prefix_table): Replace EXVexW with EXVexImmW on vpermil2ps
+	and vpermil2pd.  Replace Vex/Vex128 with VexFMA/Vex128FMA on
+	FMA instructions.
+	(print_insn): Updated.
+	(OP_EX_VexW): Rewrite to swap register in VEX with EX.
+	(OP_REG_VexI4): Check invalid high registers.
+
+2008-04-16  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
+	    Michael Meissner  <michael.meissner@amd.com>
+
+	* i386-opc.tbl: Fix protX to allow memory in the middle operand.
+	* i386-tbl.h: Regenerate from i386-opc.tbl.
+
+2008-04-14  Edmar Wienskoski  <edmar@freescale.com>
+
+	* ppc-dis.c (powerpc_dialect): Handle "e500mc".  Extend "e500" to
+	accept Power E500MC instructions.
+	(print_ppc_disassembler_options): Document -Me500mc.
+	* ppc-opc.c (DUIS, DUI, T): New.
+	(XRT, XRTRA): Likewise.
+	(E500MC): Likewise.
+	(powerpc_opcodes): Add new Power E500MC instructions.
+
+2008-04-10  Andreas Krebbel  <krebbel1@de.ibm.com>
+
+	* s390-dis.c (init_disasm): Evaluate disassembler_options.
+	(print_s390_disassembler_options): New function.
+	* disassemble.c (disassembler_usage): Invoke
+	print_s390_disassembler_options.
+
+2008-04-10  Andreas Krebbel  <krebbel1@de.ibm.com>
+
+	* s390-mkopc.c (insertExpandedMnemonic): Expand string sizes
+	of local variables used for mnemonic parsing: prefix, suffix and
+	number.
+
+2008-04-10  Andreas Krebbel  <krebbel1@de.ibm.com>
+
+	* s390-mkopc.c (s390_cond_ext_format): Add back the mnemonic
+	extensions for conditional jumps (o, p, m, nz, z, nm, np, no).
+	(s390_crb_extensions): New extensions table.
+	(insertExpandedMnemonic): Handle '$' tag.
+	* s390-opc.txt: Remove conditional jump variants which can now
+	be expanded automatically.
+	Replace '*' tag with '$' in the compare and branch instructions.
+
+2008-04-07  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (PREFIX_VEX_38XX): Add a tab.
+	(PREFIX_VEX_3AXX): Likewis.
+
+2008-04-07  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Remove 4 extra blank lines.
+
+2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
+	with CPU_PCLMUL_FLAGS/CpuPCLMUL.
+	(cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
+	* i386-opc.tbl: Likewise.
+
+	* i386-opc.h (CpuCLMUL): Renamed to ...
+	(CpuPCLMUL): This.
+	(CpuFMA): Updated.
+	(i386_cpu_flags): Replace cpuclmul with cpupclmul.
+
+	* i386-init.h: Regenerated.
+
+2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (OP_E_register): New.
+	(OP_E_memory): Likewise.
+	(OP_VEX): Likewise.
+	(OP_EX_Vex): Likewise.
+	(OP_EX_VexW): Likewise.
+	(OP_XMM_Vex): Likewise.
+	(OP_XMM_VexW): Likewise.
+	(OP_REG_VexI4): Likewise.
+	(PCLMUL_Fixup): Likewise.
+	(VEXI4_Fixup): Likewise.
+	(VZERO_Fixup): Likewise.
+	(VCMP_Fixup): Likewise.
+	(VPERMIL2_Fixup): Likewise.
+	(rex_original): Likewise.
+	(rex_ignored): Likewise.
+	(Mxmm): Likewise.
+	(XMM): Likewise.
+	(EXxmm): Likewise.
+	(EXxmmq): Likewise.
+	(EXymmq): Likewise.
+	(Vex): Likewise.
+	(Vex128): Likewise.
+	(Vex256): Likewise.
+	(VexI4): Likewise.
+	(EXdVex): Likewise.
+	(EXqVex): Likewise.
+	(EXVexW): Likewise.
+	(EXdVexW): Likewise.
+	(EXqVexW): Likewise.
+	(XMVex): Likewise.
+	(XMVexW): Likewise.
+	(XMVexI4): Likewise.
+	(PCLMUL): Likewise.
+	(VZERO): Likewise.
+	(VCMP): Likewise.
+	(VPERMIL2): Likewise.
+	(xmm_mode): Likewise.
+	(xmmq_mode): Likewise.
+	(ymmq_mode): Likewise.
+	(vex_mode): Likewise.
+	(vex128_mode): Likewise.
+	(vex256_mode): Likewise.
+	(USE_VEX_C4_TABLE): Likewise.
+	(USE_VEX_C5_TABLE): Likewise.
+	(USE_VEX_LEN_TABLE): Likewise.
+	(VEX_C4_TABLE): Likewise.
+	(VEX_C5_TABLE): Likewise.
+	(VEX_LEN_TABLE): Likewise.
+	(REG_VEX_XX): Likewise.
+	(MOD_VEX_XXX): Likewise.
+	(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
+	(PREFIX_0F3A44): Likewise.
+	(PREFIX_0F3ADF): Likewise.
+	(PREFIX_VEX_XXX): Likewise.
+	(VEX_OF): Likewise.
+	(VEX_OF38): Likewise.
+	(VEX_OF3A): Likewise.
+	(VEX_LEN_XXX): Likewise.
+	(vex): Likewise.
+	(need_vex): Likewise.
+	(need_vex_reg): Likewise.
+	(vex_i4_done): Likewise.
+	(vex_table): Likewise.
+	(vex_len_table): Likewise.
+	(OP_REG_VexI4): Likewise.
+	(vex_cmp_op): Likewise.
+	(pclmul_op): Likewise.
+	(vpermil2_op): Likewise.
+	(m_mode): Updated.
+	(es_reg): Likewise.
+	(PREFIX_0F38F0): Likewise.
+	(PREFIX_0F3A60): Likewise.
+	(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
+	(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
+	and PREFIX_VEX_XXX entries.
+	(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
+	(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
+	PREFIX_0F3ADF.
+	(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
+	Add MOD_VEX_XXX entries.
+	(ckprefix): Initialize rex_original and rex_ignored.  Store the
+	REX byte in rex_original.
+	(get_valid_dis386): Handle the implicit prefix in VEX prefix
+	bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
+	(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
+	calling get_valid_dis386.  Use rex_original and rex_ignored when
+	printing out REX.
+	(putop): Handle "XY".
+	(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
+	ymmq_mode.
+	(OP_E_extended): Updated to use OP_E_register and
+	OP_E_memory.
+	(OP_XMM): Handle VEX.
+	(OP_EX): Likewise.
+	(XMM_Fixup): Likewise.
+	(CMP_Fixup): Use ARRAY_SIZE.
+
+	* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
+	CPU_FMA_FLAGS and CPU_AVX_FLAGS.
+	(operand_type_init): Add OPERAND_TYPE_REGYMM and
+	OPERAND_TYPE_VEX_IMM4.
+	(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
+	(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
+	VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
+	VexImmExt and SSE2AVX.
+	(operand_types): Add RegYMM, Ymmword and Vex_Imm4.
+
+	* i386-opc.h (CpuAVX): New.
+	(CpuAES): Likewise.
+	(CpuCLMUL): Likewise.
+	(CpuFMA): Likewise.
+	(Vex): Likewise.
+	(Vex256): Likewise.
+	(VexNDS): Likewise.
+	(VexNDD): Likewise.
+	(VexW0): Likewise.
+	(VexW1): Likewise.
+	(Vex0F): Likewise.
+	(Vex0F38): Likewise.
+	(Vex0F3A): Likewise.
+	(Vex3Sources): Likewise.
+	(VexImmExt): Likewise.
+	(SSE2AVX): Likewise.
+	(RegYMM): Likewise.
+	(Ymmword): Likewise.
+	(Vex_Imm4): Likewise.
+	(Implicit1stXmm0): Likewise.
+	(CpuXsave): Updated.
+	(CpuLM): Likewise.
+	(ByteOkIntel): Likewise.
+	(OldGcc): Likewise.
+	(Control): Likewise.
+	(Unspecified): Likewise.
+	(OTMax): Likewise.
+	(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
+	(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
+	vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
+	vex3sources, veximmext and sse2avx.
+	(i386_operand_type): Add regymm, ymmword and vex_imm4.
+
+	* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.
+
+	* i386-reg.tbl: Add AVX registers, ymm0..ymm15.
+
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-03-26  Bernd Schmidt  <bernd.schmidt@analog.com>
+
+	From  Robin Getz  <robin.getz@analog.com>
+	* bfin-dis.c (bu32): Typedef.
+	(enum const_forms_t): Add c_uimm32 and c_huimm32.
+	(constant_formats[]): Add uimm32 and huimm16.
+	(fmtconst_val): New.
+	(uimm32): Define.
+	(huimm32): Define.
+	(imm16_val): Define.
+	(luimm16_val): Define.
+	(struct saved_state): Define.
+	(GREG, DPREG, DREG, PREG, SPREG, FPREG, IREG, MREG, BREG, LREG,
+	A0XREG, A0WREG, A1XREG, A1WREG,CCREG, LC0REG, LT0REG, LB0REG,
+	LC1REG, LT1REG, LB1REG, RETSREG, PCREG): Define.
+	(get_allreg): New.
+	(decode_LDIMMhalf_0): Print out the whole register value.
+
+	From Jie Zhang  <jie.zhang@analog.com>
+	* bfin-dis.c (decode_dsp32mac_0): Decode (IU) option for
+	multiply and multiply-accumulate to data register instruction.
+
+	* bfin-dis.c: (c_uimm4s4d, c_imm5d, c_imm7d, c_imm16d, c_uimm16s4d,
+	c_imm32, c_huimm32e): Define.
+	(constant_formats): Add flags for printing decimal, leading spaces, and
+	exact symbols.
+	(comment, parallel): Add global flags in all disassembly.
+	(fmtconst): Take advantage of new flags, and print default in hex.
+	(fmtconst_val): Likewise.
+	(decode_macfunc): Be consistant with spaces, tabs, comments,
+	capitalization in disassembly, fix minor coding style issues.
+	(reg_names, amod0, amod1, amod0amod2, aligndir, get_allreg): Likewise.
+	(decode_ProgCtrl_0, decode_PushPopMultiple_0, decode_CCflag_0,
+	decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
+	decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0, decode_LOGI2op_0,
+	decode_COMP3op_0, decode_COMPI2opD_0, decode_COMPI2opP_0,
+	decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
+	decode_dspLDST_0, decode_LDST_0, decode_LDSTiiFP_0, decode_LDSTii_0,
+	decode_LoopSetup_0, decode_LDIMMhalf_0, decode_CALLa_0,
+	decode_LDSTidxI_0, decode_linkage_0, decode_dsp32alu_0,
+	decode_dsp32shift_0, decode_dsp32shiftimm_0, decode_pseudodbg_assert_0,
+	_print_insn_bfin, print_insn_bfin): Likewise.
+
+2008-03-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* aclocal.m4: Regenerate.
+	* configure: Likewise.
+	* Makefile.in: Likewise.
+
+2008-03-13  Alan Modra  <amodra@bigpond.net.au>
+
+	* Makefile.am: Run "make dep-am".
+	* Makefile.in: Regenerate.
+	* configure: Regenerate.
+
+2008-03-07  Alan Modra  <amodra@bigpond.net.au>
+
+	* ppc-opc.c (powerpc_opcodes): Order and format.
+
+2008-03-01  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Allow 16-bit near indirect branches for x86-64.
+	* i386-tbl.h: Regenerated.
+
+2008-02-23  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Disallow 16-bit near indirect branches for
+	x86-64.
+	* i386-tbl.h: Regenerated.
+
+2008-02-21  Jan Beulich  <jbeulich@novell.com>
+
+	* i386-opc.tbl: Allow Dword for far indirect call. Allow Dword
+	and Fword for far indirect jmp. Allow Reg16 and Word for near
+	indirect jmp on x86-64. Disallow Fword for lcall.
+	* i386-tbl.h: Re-generate.
+
+2008-02-18  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
+
+	* cr16-opc.c  (cr16_num_optab): Defined
+
+2008-02-16  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c  (operand_type_init): Add OPERAND_TYPE_INOUTPORTREG.
+	* i386-init.h: Regenerated.
+
+2008-02-14  Nick Clifton  <nickc@redhat.com>
+
+	PR binutils/5524
+	* configure.in (SHARED_LIBADD): Select the correct host specific
+	file extension for shared libraries.
+	* configure: Regenerate.
+
+2008-02-13  Jan Beulich  <jbeulich@novell.com>
+
+	* i386-opc.h (RegFlat): New.
+	* i386-reg.tbl (flat): Add.
+	* i386-tbl.h: Re-generate.
+
+2008-02-13  Jan Beulich  <jbeulich@novell.com>
+
+	* i386-dis.c (a_mode): New.
+	(cond_jump_mode): Adjust.
+	(Ma): Change to a_mode.
+	(intel_operand_size): Handle a_mode.
+	* i386-opc.tbl: Allow Dword and Qword for bound.
+	* i386-tbl.h: Re-generate.
+
+2008-02-13  Jan Beulich  <jbeulich@novell.com>
+
+	* i386-gen.c (process_i386_registers): Process new fields.
+	* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
+	unsigned char. Add dw2_regnum and Dw2Inval.
+	* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
+	register names.
+	* i386-tbl.h: Re-generate.
+
+2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flag_init): Add CPU_XSAVE_FLAGS.
+	* i386-init.h: Updated.
+
+2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flags): Add CpuXsave.
+
+	* i386-opc.h (CpuXsave): New.
+	(CpuLM): Updated.
+	(i386_cpu_flags): Add cpuxsave.
+
+	* i386-dis.c (MOD_0FAE_REG_4): New.
+	(RM_0F01_REG_2): Likewise.
+	(MOD_0FAE_REG_5): Updated.
+	(RM_0F01_REG_3): Likewise.
+	(reg_table): Use MOD_0FAE_REG_4.
+	(mod_table): Use RM_0F01_REG_2.  Add MOD_0FAE_REG_4.  Updated
+	for xrstor.
+	(rm_table): Add RM_0F01_REG_2.
+
+	* i386-opc.tbl: Add xsave, xrstor, xgetbv and xsetbv.
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-02-11  Jan Beulich  <jbeulich@novell.com>
+
+	* i386-opc.tbl: Remove Disp32S from CpuNo64 opcodes. Remove
+	Disp16 from Cpu64 non-jump opcodes (including loop and j?cxz).
+	* i386-tbl.h: Re-generate.
+
+2008-02-04  H.J. Lu  <hongjiu.lu@intel.com>
+
+	PR 5715
+	* configure: Regenerated.
+
+2008-02-04  Adam Nemet  <anemet@caviumnetworks.com>
+
+	* mips-dis.c: Update copyright.
+	(mips_arch_choices): Add Octeon.
+	* mips-opc.c: Update copyright.
+	(IOCT): New macro.
+	(mips_builtin_opcodes): Add Octeon instruction synciobdma.
+
+2008-01-29  Alan Modra  <amodra@bigpond.net.au>
+
+	* ppc-opc.c: Support optional L form mtmsr.
+
+2008-01-24  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (OP_E_extended): Handle r12 like rsp.
+
+2008-01-23  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flag_init): Add CpuLM to CPU_GENERIC64_FLAGS.
+	* i386-init.h: Regenerated.
+
+2008-01-23  Tristan Gingold  <gingold@adacore.com>
+
+	* ia64-dis.c (print_insn_ia64): Display symbolic name of ar.fcr,
+	ar.eflag, ar.csd, ar.ssd, ar.cflg, ar.fsr, ar.fir and ar.fdr.
+
+2008-01-22  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flag_init): Remove CpuMMX2.
+	(cpu_flags): Likewise.
+
+	* i386-opc.h (CpuMMX2): Removed.
+	(CpuSSE): Updated.
+
+	* i386-opc.tbl: Replace CpuMMX2 with CpuSSE|Cpu3dnowA.
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-01-22  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flag_init): Add CPU_VMX_FLAGS and
+	CPU_SMX_FLAGS.
+	* i386-init.h: Regenerated.
+
+2008-01-15  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Use Qword on movddup.
+	* i386-tbl.h: Regenerated.
+
+2008-01-15  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Put back 16bit movsx/movzx for AT&T syntax.
+	* i386-tbl.h: Regenerated.
+
+2008-01-15  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (Mx): New.
+	(PREFIX_0FC3): Likewise.
+	(PREFIX_0FC7_REG_6): Updated.
+	(dis386_twobyte): Use PREFIX_0FC3.
+	(prefix_table): Add PREFIX_0FC3.  Use Mq on movntq and movntsd.
+	Use Mx on movntps, movntpd, movntdq and movntdqa.  Use Md on
+	movntss.
+
+2008-01-14  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (opcode_modifiers): Add IntelSyntax.
+	(operand_types): Add Mem.
+
+	* i386-opc.h (IntelSyntax): New.
+	* i386-opc.h (Mem): New.
+	(Byte): Updated.
+	(Opcode_Modifier_Max): Updated.
+	(i386_opcode_modifier): Add intelsyntax.
+	(i386_operand_type): Add mem.
+
+	* i386-opc.tbl: Remove Reg16 from movnti.  Add sizes to more
+	instructions.
+
+	* i386-reg.tbl: Add size for accumulator.
+
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-01-13  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.h (Byte): Fix a typo.
+
+2008-01-12  H.J. Lu  <hongjiu.lu@intel.com>
+
+	PR gas/5534
+	* i386-gen.c (operand_type_init): Add Dword to
+	OPERAND_TYPE_ACC32.  Add Qword to OPERAND_TYPE_ACC64.
+	(opcode_modifiers): Remove CheckSize, Byte, Word, Dword,
+	Qword and Xmmword.
+	(operand_types): Add Byte, Word, Dword, Fword, Qword, Tbyte,
+	Xmmword, Unspecified and Anysize.
+	(set_bitfield): Make Mmword an alias of Qword.  Make Oword
+	an alias of Xmmword.
+
+	* i386-opc.h (CheckSize): Removed.
+	(Byte): Updated.
+	(Word): Likewise.
+	(Dword): Likewise.
+	(Qword): Likewise.
+	(Xmmword): Likewise.
+	(FWait): Updated.
+	(OTMax): Likewise.
+	(i386_opcode_modifier): Remove checksize, byte, word, dword,
+	qword and xmmword.
+	(Fword): New.
+	(TBYTE): Likewise.
+	(Unspecified): Likewise.
+	(Anysize): Likewise.
+	(i386_operand_type): Add byte, word, dword, fword, qword,
+	tbyte xmmword, unspecified and anysize.
+
+	* i386-opc.tbl: Updated to use Byte, Word, Dword, Fword, Qword,
+	Tbyte, Xmmword, Unspecified and Anysize.
+
+	* i386-reg.tbl: Add size for accumulator.
+
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-01-10  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
+	(REG_0F18): Updated.
+	(reg_table): Updated.
+	(dis386_twobyte): Updated.  Use "nopQ" on 0x19 to 0x1e.
+	(twobyte_has_modrm): Set 1 for 0x19 to 0x1e.
+
+2008-01-08  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (set_bitfield): Use fail () on error.
+
+2008-01-08  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (lineno): New.
+	(filename): Likewise.
+	(set_bitfield): Report filename and line numer on error.
+	(process_i386_opcodes): Set filename and update lineno.
+	(process_i386_registers): Likewise.
+
+2008-01-05  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (opcode_modifiers): Rename IntelMnemonic to
+	ATTSyntax.
+
+	* i386-opc.h (IntelMnemonic): Renamed to ..
+	(ATTSyntax): This
+	(Opcode_Modifier_Max): Updated.
+	(i386_opcode_modifier): Remove intelmnemonic. Add attsyntax
+	and intelsyntax.
+
+	* i386-opc.tbl: Remove IntelMnemonic and update with ATTSyntax
+	on fsub, fubp, fsubr, fsubrp, div, fdivp, fdivr and fdivrp.
+	* i386-tbl.h: Regenerated.
+
+2008-01-04  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c: Update copyright to 2008.
+	* i386-opc.h: Likewise.
+	* i386-opc.tbl: Likewise.
+
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-01-04  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.tbl: Add NoRex64 to extractps, movmskpd, movmskps,
+	pextrb, pextrw, pinsrb, pinsrw and pmovmskb.
+	* i386-tbl.h: Regenerated.
+
+2008-01-03  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flag_init): Remove CpuSSE4_1_Or_5 and
+	CpuSSE4_2_Or_ABM.
+	(cpu_flags): Likewise.
+
+	* i386-opc.h (CpuSSE4_1_Or_5): Removed.
+	(CpuSSE4_2_Or_ABM): Likewise.
+	(CpuLM): Updated.
+	(i386_cpu_flags): Remove cpusse4_1_or_5 and cpusse4_2_or_abm.
+
+	* i386-opc.tbl: Replace CpuSSE4_1_Or_5, CpuSSE4_2_Or_ABM and
+	Cpu686|CpuPadLock with CpuSSE4_1|CpuSSE5, CpuABM|CpuSSE4_2
+	and CpuPadLock, respectively.
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-01-03  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (opcode_modifiers): Remove No_xSuf.
+
+	* i386-opc.h (No_xSuf): Removed.
+	(CheckSize): Updated.
+
+	* i386-tbl.h: Regenerated.
+
+2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (cpu_flag_init): Add CpuSSE4_2_Or_ABM to
+	CPU_AMDFAM10_FLAGS, CPU_SSE4_2_FLAGS, CpuABM and
+	CPU_SSE5_FLAGS.
+	(cpu_flags): Add CpuSSE4_2_Or_ABM.
+
+	* i386-opc.h (CpuSSE4_2_Or_ABM): New.
+	(CpuLM): Updated.
+	(i386_cpu_flags): Add cpusse4_2_or_abm.
+
+	* i386-opc.tbl: Use CpuSSE4_2_Or_ABM instead of
+	CpuABM|CpuSSE4_2 on popcnt.
+	* i386-init.h: Regenerated.
+	* i386-tbl.h: Likewise.
+
+2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-opc.h: Update comments.
+
+2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* i386-gen.c (opcode_modifiers): Use Qword instead of QWord.
+	* i386-opc.h: Likewise.
+	* i386-opc.tbl: Likewise.
+
+2008-01-02  H.J. Lu  <hongjiu.lu@intel.com>
+
+	PR gas/5534
+	* i386-gen.c (opcode_modifiers): Add No_xSuf, CheckSize,
+	Byte, Word, Dword, QWord and Xmmword.
+
+	* i386-opc.h (No_xSuf): New.
+	(CheckSize): Likewise.
+	(Byte): Likewise.
+	(Word): Likewise.
+	(Dword): Likewise.
+	(QWord): Likewise.
+	(Xmmword): Likewise.
+	(FWait): Updated.
+	(i386_opcode_modifier): Add No_xSuf, CheckSize, Byte, Word,
+	Dword, QWord and Xmmword.
+
+	* i386-opc.tbl: Add CheckSize|QWord to movq if IgnoreSize is
+	used.
+	* i386-tbl.h: Regenerated.
+
+2008-01-02  Mark Kettenis  <kettenis@gnu.org>
+
+	* m88k-dis.c (instructions): Fix fcvt.* instructions.
+	From Miod Vallat.
+
+For older changes see ChangeLog-2007
+
+Local Variables:
+mode: change-log
+left-margin: 8
+fill-column: 74
+version-control: never
+End: