* archures.c: Add some more MSP430 machine numbers.

	* config.bfd (msp430): Define targ_selvecs.
	* configure.in: Add bfd_elf32_msp430_ti_vec.
	* cpu-msp430.c: Add some more MSP430 machine numbers.
	* elf32-msp430.c Add support for MSP430X relocations.
	Add support for TI compiler generated relocations.
	Add support for sym_diff relocations.
	Add support for relaxing out of range short branches into long
	branches.
	Add support for MSP430 attribute section.
	* reloc.c: Add MSP430X relocations.
	* targets.c: Add bfd_elf32_msp430_ti_vec.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.

	* readelf.c: Add support for MSP430X architecture.

	* readelf.exp: Expect -wi test to fail for the MSP430.

	* config/tc-msp430.c: Add support for the MSP430X architecture.
	Add code to insert a NOP instruction after any instruction that
	might change the interrupt state.
	Add support for the LARGE memory model.
	Add code to initialise the .MSP430.attributes section.
	* config/tc-msp430.h: Add support for the MSP430X architecture.
	* doc/c-msp430.texi: Document the new -mL and -mN command line
	options.
	* NEWS: Mention support for the MSP430X architecture.

	* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
	Expect the FORWARD test to pass for the MSP430.
	Skip the REDEF tests for the MSP430.
	Expect the 930509A test to fail for the MSP430.
	* gas/all/sleb128-4.d: Skip for the MSP430.
	* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
	Skip the EHOPT0 test for the MSP430.
	Skip the REDEF and EQU-RELOC tests for the MSP430.
	* gas/elf/section2.e-msp430: New file.
	* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
	addresses.
	* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
	* gas/msp430/msp430x.s: New test.
	* gas/msp430/msp430x.d: Expected disassembly.
	* gas/msp430/msp430.exp: Run new test.
	* gas/msp430/opcode.d: Update expected disassembly.

	* msp430.h: Add MSP430X relocs.
	Add some more MSP430 machine numbers.
	Add values used by .MSP430.attributes section.

	* msp430.h: Add patterns for MSP430X instructions.

	* Makefile.am: Add emsp430X.c
	* Makefine.in: Regenerate.
	* configure.tgt (msp430): Add msp430X emulation.
	* ldmain.c (multiple_definition): Only disable relaxation if it
	was enabled by the user.
	* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
	* emulparams/msp430all.sh: Add support for MSP430X.
	* emultempl/generic.em: (before_parse): Enable relaxation for the
	MSP430.
	* scripttempl/msp430.sc: Reorganize sections.  Add .rodata
	section.
	* scripttempl/msp430_3.sc: Likewise.
	* NEWS: Mention support for MSP430X.

	* ld-elf/flags1.d: Expect this test to pass on the MSP430.
	* ld-elf/init-fini-arrays.d: Expect this test to fail on the
	MSP430.
	* ld-elf/merge.d: Expect this test to pass on the MSP430.
	* ld-elf/sec64k.exp: Skip these tests for the MSP430.
	* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
	* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
	* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
	fail on the MSP430.

	* msp430-dis.c: Add support for MSP430X instructions.

2 files changed, 73 insertions, 1 deletions

diff --git a/include/opcode/ChangeLog b/include/opcode/ChangeLog
index 9eed104987..2b76a3643a 100644
--- a/include/opcode/ChangeLog
+++ b/include/opcode/ChangeLog
@@ -1,3 +1,7 @@
+2013-05-02  Nick Clifton  <nickc@redhat.com>
+
+	* msp430.h: Add patterns for MSP430X instructions.
+
 2013-04-06  David S. Miller  <davem@davemloft.net>
 
 	* sparc.h (F_PREFERRED): Define.
diff --git a/include/opcode/msp430.h b/include/opcode/msp430.h
index d3bf130ee0..caddc42db1 100644
--- a/include/opcode/msp430.h
+++ b/include/opcode/msp430.h
@@ -1,6 +1,6 @@
 /* Opcode table for the TI MSP430 microcontrollers
 
-   Copyright 2002, 2004, 2010 Free Software Foundation, Inc.
+   Copyright 2002-2013 Free Software Foundation, Inc.
    Contributed by Dmitry Diky <diwil@mail.ru>
    
    This program is free software; you can redistribute it and/or modify
@@ -119,6 +119,74 @@ static struct msp430_opcode_s msp430_opcodes[] =
   MSP_INSN (bleu,  5, 2, 0, 0xffff),
   MSP_INSN (ble,   5, 3, 0, 0xffff),
 
+  /* MSP430X instructions - these ones use an extension word.
+     A negative format indicates an MSP430X instruction.  */
+  MSP_INSN (addcx, -2, 2, 0x6000, 0xf000),
+  MSP_INSN (addx,  -2, 2, 0x5000, 0xf000),
+  MSP_INSN (andx,  -2, 2, 0xf000, 0xf000),
+  MSP_INSN (bicx,  -2, 2, 0xc000, 0xf000),
+  MSP_INSN (bisx,  -2, 2, 0xd000, 0xf000),
+  MSP_INSN (bitx,  -2, 2, 0xb000, 0xf000),
+  MSP_INSN (cmpx,  -2, 2, 0x9000, 0xf000),
+  MSP_INSN (daddx, -2, 2, 0xa000, 0xf000),
+  MSP_INSN (movx,  -2, 2, 0x4000, 0xf000),
+  MSP_INSN (subcx, -2, 2, 0x7000, 0xf000),
+  MSP_INSN (subx,  -2, 2, 0x8000, 0xf000),
+  MSP_INSN (xorx,  -2, 2, 0xe000, 0xf000),
+
+  /* MSP430X Synthetic instructions.  */
+  MSP_INSN (adcx,  -1, 1, 0x6300, 0xff30),
+  MSP_INSN (clra,  -1, 1, 0x4300, 0xff30),
+  MSP_INSN (clrx,  -1, 1, 0x4300, 0xff30),
+  MSP_INSN (dadcx, -1, 1, 0xa300, 0xff30),
+  MSP_INSN (decx,  -1, 1, 0x8310, 0xff30),  
+  MSP_INSN (decda, -1, 1, 0x8320, 0xff30),
+  MSP_INSN (decdx, -1, 1, 0x8320, 0xff30),
+  MSP_INSN (incx,  -1, 1, 0x5310, 0xff30),  
+  MSP_INSN (incda, -1, 1, 0x5320, 0xff30),
+  MSP_INSN (incdx, -1, 1, 0x5320, 0xff30),
+  MSP_INSN (invx,  -1, 1, 0xe330, 0xfff0),
+  MSP_INSN (popx,  -1, 1, 0x4130, 0xff30),
+  MSP_INSN (rlax,  -1, 2, 0x5000, 0xf000),  
+  MSP_INSN (rlcx,  -1, 2, 0x6000, 0xf000),
+  MSP_INSN (sbcx,  -1, 1, 0x7300, 0xff30),
+  MSP_INSN (tsta,  -1, 1, 0x9300, 0xff30),
+  MSP_INSN (tstx,  -1, 1, 0x9300, 0xff30),
+
+  MSP_INSN (pushx, -3, 1, 0x1200, 0xff80),
+  MSP_INSN (rrax,  -3, 1, 0x1100, 0xff80),
+  MSP_INSN (rrcx,  -3, 1, 0x1000, 0xff80),
+  MSP_INSN (swpbx, -3, 1, 0x1080, 0xffc0),
+  MSP_INSN (sxtx,  -3, 1, 0x1180, 0xffc0),
+
+  /* MSP430X Address instructions - no extension word needed.
+     The insn_opnumb field is used to encode the nature of the
+     instruction for assembly and disassembly purposes.  */
+  MSP_INSN (calla, -1, 4, 0x1300, 0xff00),
+
+  MSP_INSN (popm,  -1, 5, 0x1600, 0xfe00),
+  MSP_INSN (pushm, -1, 5, 0x1400, 0xfe00),
+
+  MSP_INSN (rrcm,  -1, 6, 0x0040, 0xf3e0),
+  MSP_INSN (rram,  -1, 6, 0x0140, 0xf3e0),
+  MSP_INSN (rlam,  -1, 6, 0x0240, 0xf3e0),
+  MSP_INSN (rrum,  -1, 6, 0x0340, 0xf3e0),
+
+  MSP_INSN (rrux,  -1, 7, 0x0340, 0xffe0), /* Synthesized in terms of RRUM.  */
+
+  MSP_INSN (adda,  -1, 8, 0x00a0, 0xf0b0),
+  MSP_INSN (cmpa,  -1, 8, 0x0090, 0xf0b0),
+  MSP_INSN (suba,  -1, 8, 0x00b0, 0xf0b0),
+
+  MSP_INSN (reta,  -1, 9, 0x0110, 0xffff),
+  MSP_INSN (bra,   -1, 9, 0x0000, 0xf0cf),
+  MSP_INSN (mova,  -1, 9, 0x0000, 0xf080),
+  MSP_INSN (mova,  -1, 9, 0x0080, 0xf0b0),
+  MSP_INSN (mova,  -1, 9, 0x00c0, 0xf0f0),
+
+  /* Pseudo instruction to set the repeat field in the extension word.  */
+  MSP_INSN (rpt,   -1, 10, 0x0000, 0x0000),
+
   /* End of instruction set.  */
   { NULL, 0, 0, 0, 0 }
 };