Initial creation of sourceware repository

1 files changed, 0 insertions, 293 deletions

diff --git a/gdb/config/h8500/tm-h8500.h b/gdb/config/h8500/tm-h8500.h
deleted file mode 100644
index 8f7d9664ef..0000000000
--- a/gdb/config/h8500/tm-h8500.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/* Parameters for execution on a H8/500 series machine.
-   Copyright (C) 1993, 1995 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Contributed by Steve Chamberlain sac@cygnus.com */
-
-#define GDB_TARGET_IS_H8500
-
-#define IEEE_FLOAT 1
-
-/* Define the bit, byte, and word ordering of the machine.  */
-
-#define TARGET_BYTE_ORDER BIG_ENDIAN
-
-/* Define the sizes of integers and pointers.  */
-
-#define TARGET_INT_BIT 16
-
-#define TARGET_LONG_BIT 32
-
-#define TARGET_PTR_BIT (minimum_mode ? 16 : 32)
-
-/* Offset from address of function to start of its code.
-   Zero on most machines.  */
-
-#define FUNCTION_START_OFFSET 0
-
-/* Advance PC across any function entry prologue instructions
-   to reach some "real" code.  */
-
-#define SKIP_PROLOGUE(ip)   { (ip) = h8500_skip_prologue(ip); }
-extern CORE_ADDR h8500_skip_prologue PARAMS ((CORE_ADDR));
-
-/* Immediately after a function call, return the saved pc.
-   Can't always go through the frames for this because on some machines
-   the new frame is not set up until the new function executes
-   some instructions.  */
-
-#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call()
-extern CORE_ADDR saved_pc_after_call PARAMS ((void));
-
-/* Stack grows downward.  */
-
-#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
-
-/* Illegal instruction - used by the simulator for breakpoint
-   detection */
-
-#define BREAKPOINT {0x0b}
-
-/* If your kernel resets the pc after the trap happens you may need to
-   define this before including this file.  */
-
-#define DECR_PC_AFTER_BREAK 0
-
-/* Say how long registers are.  */
-
-#define REGISTER_TYPE  unsigned long
-
-/* Say how much memory is needed to store a copy of the register set */
-
-#define REGISTER_BYTES    (NUM_REGS * 4) 
-
-/* Index within `registers' of the first byte of the space for
-   register N.  */
-
-#define REGISTER_BYTE(N)  ((N)*4)
-
-/* Number of bytes of storage in the actual machine representation
-   for register N.  */
-
-#define REGISTER_RAW_SIZE(N) h8500_register_size(N)
-extern int h8500_register_size PARAMS ((int regno));
-
-#define REGISTER_SIZE 4
-
-#define REGISTER_VIRTUAL_SIZE(N) h8500_register_size(N)
-
-/* Largest value REGISTER_RAW_SIZE can have.  */
-
-#define MAX_REGISTER_RAW_SIZE 4
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 4
-
-/* Return the GDB type object for the "standard" data type
-   of data in register N.  */
-
-#define REGISTER_VIRTUAL_TYPE(N) h8500_register_virtual_type(N)
-extern struct type *h8500_register_virtual_type PARAMS ((int regno));
-
-/* Initializer for an array of names of registers.
-   Entries beyond the first NUM_REGS are ignored.  */
-
-#define REGISTER_NAMES \
-  { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
-   "pr0","pr1","pr2","pr3","pr4","pr5","pr6","pr7", \
-    "cp", "dp", "ep", "tp", "sr", "pc"}
-
-/* Register numbers of various important registers.  Note that some of
-   these values are "real" register numbers, and correspond to the
-   general registers of the machine, and some are "phony" register
-   numbers which are too large to be actual register numbers as far as
-   the user is concerned but do serve to get the desired values when
-   passed to read_register.  */
-
-#define R0_REGNUM	0
-#define R1_REGNUM	1
-#define R2_REGNUM	2
-#define R3_REGNUM	3
-#define R4_REGNUM	4
-#define R5_REGNUM	5
-#define R6_REGNUM	6
-#define R7_REGNUM	7
-
-#define PR0_REGNUM	8
-#define PR1_REGNUM	9
-#define PR2_REGNUM	10
-#define PR3_REGNUM	11
-#define PR4_REGNUM	12
-#define PR5_REGNUM	13
-#define PR6_REGNUM	14
-#define PR7_REGNUM	15
-
-#define SEG_C_REGNUM	16	/* Segment registers */
-#define SEG_D_REGNUM	17
-#define SEG_E_REGNUM	18
-#define SEG_T_REGNUM	19
-
-#define CCR_REGNUM      20	/* Contains processor status */
-#define PC_REGNUM       21	/* Contains program counter */
-
-#define NUM_REGS 	22
-
-#define SP_REGNUM       PR7_REGNUM /* Contains address of top of stack */
-#define FP_REGNUM       PR6_REGNUM /* Contains address of executing stack frame */
-
-#define PTR_SIZE (minimum_mode ? 2 : 4)
-#define PTR_MASK (minimum_mode ? 0x0000ffff : 0x00ffffff)
-
-/* Store the address of the place in which to copy the structure the
-   subroutine will return.  This is called from call_function. */
-
-/*#define STORE_STRUCT_RETURN(ADDR, SP) \
-  { write_register (0, (ADDR)); abort(); }*/
-
-/* Extract from an array REGBUF containing the (raw) register state
-   a function return value of type TYPE, and copy that, in virtual format,
-   into VALBUF.  */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
-  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
-
-/* Write into appropriate registers a function return value
-   of type TYPE, given in virtual format.  */
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
-  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
-
-/* Extract from an array REGBUF containing the (raw) register state
-   the address in which a function should return its structure value,
-   as a CORE_ADDR (or an expression that can be used as one).  */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
-
-
-/* Define other aspects of the stack frame.  */
-
-/* A macro that tells us whether the function invocation represented
-   by FI does not have a frame on the stack associated with it.  If it
-   does not, FRAMELESS is set to 1, else 0.  */
-
-#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
-  (FRAMELESS) = frameless_look_for_prologue(FI)
-
-/* Any function with a frame looks like this
-   SECOND ARG
-   FIRST ARG
-   RET PC
-   SAVED R2
-   SAVED R3
-   SAVED FP   <-FP POINTS HERE
-   LOCALS0
-   LOCALS1    <-SP POINTS HERE
-   
-   */
-
-#define INIT_EXTRA_FRAME_INFO(fromleaf, fci)  ;
-/*       (fci)->frame |= read_register(SEG_T_REGNUM) << 16;*/
-
-#define FRAME_CHAIN(FRAME) h8500_frame_chain(FRAME)
-struct frame_info;
-extern CORE_ADDR h8500_frame_chain PARAMS ((struct frame_info *));
-
-#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME)
-extern CORE_ADDR frame_saved_pc PARAMS ((struct frame_info *frame));
-
-#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
-
-#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
-
-/* Set VAL to the number of args passed to frame described by FI.
-   Can set VAL to -1, meaning no way to tell.  */
-
-/* We can't tell how many args there are
-   now that the C compiler delays popping them.  */
-
-#define FRAME_NUM_ARGS(val,fi) (val = -1)
-
-/* Return number of bytes at start of arglist that are not really args.  */
-
-#define FRAME_ARGS_SKIP 0
-
-/* Put here the code to store, into a struct frame_saved_regs,
-   the addresses of the saved registers of frame described by FRAME_INFO.
-   This includes special registers such as pc and fp saved in special
-   ways in the stack frame.  sp is even more special:
-   the address we return for it IS the sp for the next frame.  */
-
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
-   frame_find_saved_regs(frame_info, &(frame_saved_regs))
-struct frame_saved_regs;
-extern void frame_find_saved_regs PARAMS ((struct frame_info *frame_info, struct frame_saved_regs *frame_saved_regs));
-
-
-/* Discard from the stack the innermost frame, restoring all registers.  */
-
-#define POP_FRAME { h8500_pop_frame (); }
-extern void h8500_pop_frame PARAMS ((void));
-
-#define SHORT_INT_MAX 32767
-#define SHORT_INT_MIN -32768
-
-#define NAMES_HAVE_UNDERSCORE
-
-typedef unsigned short INSN_WORD;
-
-extern CORE_ADDR h8500_addr_bits_remove PARAMS ((CORE_ADDR));
-#define ADDR_BITS_REMOVE(addr) h8500_addr_bits_remove (addr)
-
-#define read_memory_short(x)  (read_memory_integer(x,2) & 0xffff)
-
-#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
-extern void print_register_hook PARAMS ((int));
-
-extern int minimum_mode;
-
-#define CALL_DUMMY_LENGTH 10
-
-/* Fake variables to make it easy to use 24 bit register pointers */
-
-#define IS_TRAPPED_INTERNALVAR h8500_is_trapped_internalvar
-extern int h8500_is_trapped_internalvar PARAMS ((char *name));
-
-#define VALUE_OF_TRAPPED_INTERNALVAR h8500_value_of_trapped_internalvar
-extern struct value * h8500_value_of_trapped_internalvar (/* struct internalvar *var */);
-
-#define SET_TRAPPED_INTERNALVAR h8500_set_trapped_internalvar
-extern void h8500_set_trapped_internalvar (/* struct internalvar *var, value newval, int bitpos, int bitsize, int offset */);
-
-extern CORE_ADDR h8500_read_sp PARAMS ((void));
-extern void h8500_write_sp PARAMS ((CORE_ADDR));
-
-extern CORE_ADDR h8500_read_fp PARAMS ((void));
-extern void h8500_write_fp PARAMS ((CORE_ADDR));
-
-extern CORE_ADDR h8500_read_pc PARAMS ((int));
-extern void h8500_write_pc PARAMS ((CORE_ADDR, int));
-
-#define TARGET_READ_SP() h8500_read_sp()
-#define TARGET_WRITE_SP(x) h8500_write_sp(x)
-
-#define TARGET_READ_PC(pid) h8500_read_pc(pid)
-#define TARGET_WRITE_PC(x,pid) h8500_write_pc(x,pid)
-
-#define TARGET_READ_FP() h8500_read_fp()
-#define TARGET_WRITE_FP(x) h8500_write_fp(x)