bfd ChangeLog

	* elf32-xtensa.c (elf32xtensa_size_opt): New global variable.
	(xtensa_default_isa): Global variable moved here from xtensa-isa.c.
	(elf32xtensa_no_literal_movement): New global variable.
	(elf_howto_table): Add entries for new relocations.
	(elf_xtensa_reloc_type_lookup): Handle new relocations.
	(property_table_compare): When addresses are equal, compare sizes and
	various property flags.
	(property_table_matches): New.
	(xtensa_read_table_entries): Extend to read new property tables.  Add
	output_addr parameter to indicate that output addresses should be used.
	Use bfd_get_section_limit.
	(elf_xtensa_find_property_entry): New.
	(elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry.
	(elf_xtensa_check_relocs): Handle new relocations.
	(elf_xtensa_do_reloc): Use bfd_get_section_limit.  Handle new
	relocations.  Use new xtensa-isa.h functions.
	(build_encoding_error_message): Remove encode_result parameter.  Add
	new target_address parameter used to detect alignment errors.
	(elf_xtensa_relocate_section): Use bfd_get_section_limit.  Clean up
	error handling.  Use new is_operand_relocation function.
	(elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data):
	Use underbar macro for error messages.  Formatting.
	(get_const16_opcode): New.
	(get_l32r_opcode): Add a separate flag for initialization.
	(get_relocation_opnd): Operand number is no longer explicit in the
	relocation.  Change to decode the opcode and analyze its operands.
	(get_relocation_slot): New.
	(get_relocation_opcode): Add bfd parameter.  Use bfd_get_section_limit.
	Use new xtensa-isa.h functions to handle multislot instructions.
	(is_l32r_relocation): Add bfd parameter.  Use is_operand_relocation.
	(get_asm_simplify_size, is_alt_relocation, is_operand_relocation,
	insn_decode_len, insn_decode_opcode, check_branch_target_aligned,
	check_loop_aligned, check_branch_target_aligned_address, narrowable,
	widenable, narrow_instruction, widen_instruction, op_single_fmt_table,
	get_single_format, init_op_single_format_table): New.
	(elf_xtensa_do_asm_simplify): Add error_message parameter and use it
	instead of calling _bfd_error_handler.  Use new xtensa-isa.h functions.
	(contract_asm_expansion): Add error_message parameter and pass it to
	elf_xtensa_do_asm_simplify.  Replace use of R_XTENSA_OP0 relocation
	with R_XTENSA_SLOT0_OP.
	(get_expanded_call_opcode): Extend to handle either L32R or CONST16
	instructions.  Use new xtensa-isa.h functions.
	(r_reloc struct): Add new virtual_offset field.
	(r_reloc_init): Add contents and content_length parameters.  Set
	virtual_offset field to zero.  Add contents to target_offset field for
	partial_inplace relocations.
	(r_reloc_is_defined): Check for null.
	(print_r_reloc): New debug function.
	(source_reloc struct): Replace xtensa_operand field with pair of the
	opcode and the operand position.  Add is_abs_literal field.
	(init_source_reloc): Specify operand by opcode/position pair.  Set
	is_abs_literal field.
	(source_reloc_compare): When target_offsets are equal, compare other
	fields to make sorting predictable.
	(literal_value struct): Add is_abs_literal field.
	(value_map_hash_table struct): Add has_last_loc and last_loc fields.
	(init_literal_value): New.
	(is_same_value): Replace with ...
	(literal_value_equal): ... this function.  Add comparisons of
	virtual_offset and is_abs_literal fields.
	(value_map_hash_table_init): Use bfd_zmalloc.  Check for allocation
	failure.  Initialize has_last_loc field.
	(value_map_hash_table_delete): New.
	(hash_literal_value): Rename to ...
	(literal_value_hash): ... this.  Include is_abs_literal flag and
	virtual_offset field in the hash value.
	(get_cached_value): Rename to ...
	(value_map_get_cached_value): ... this.  Update calls to
	literal_value_hash and literal_value_equal.
	(add_value_map): Check for allocation failure.  Update calls to
	value_map_get_cached_value and literal_value_hash.
	(text_action, text_action_list, text_action_t): New types.
	(find_fill_action, compute_removed_action_diff, adjust_fill_action,
	text_action_add, text_action_add_literal, offset_with_removed_text,
	offset_with_removed_text_before_fill, find_insn_action,
	print_action_list, print_removed_literals): New.
	(offset_with_removed_literals): Delete.
	(xtensa_relax_info struct): Add is_relaxable_asm_section, action_list,
	fix_array, fix_array_count, allocated_relocs, relocs_count, and
	allocated_relocs_count fields.
	(init_xtensa_relax_info): Initialize new fields.
	(reloc_bfd_fix struct): Add new translated field.
	(reloc_bfd_fix_init): Add translated parameter and use it to set the
	translated field.
	(fix_compare, cache_fix_array): New.
	(get_bfd_fix): Remove fix_list parameter and get all relax_info for the
	section via get_xtensa_relax_info.  Use cache_fix_array to set up
	sorted fix_array and use bsearch instead of linear search.
	(section_cache_t): New struct.
	(init_section_cache, section_cache_section, clear_section_cache): New.
	(ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types.
	(init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds,
	extend_ebb_bounds_forward, extend_ebb_bounds_backward,
	insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action):
	New.
	(retrieve_contents): Use bfd_get_section_limit.
	(elf_xtensa_relax_section): Add relocations_analyzed flag.  Update call
	to compute_removed_literals.  Free value_map_hash_table when no longer
	needed.
	(analyze_relocations): Check is_relaxable_asm_section flag.  Call
	compute_text_actions for all sections.
	(find_relaxable_sections): Mark sections as relaxable if they contain
	ASM_EXPAND relocations that can be optimized.  Adjust r_reloc_init
	call.  Increment relax_info src_count field only for appropriate
	relocation types.  Remove is_literal_section check.
	(collect_source_relocs): Use bfd_get_section_limit.  Adjust calls to
	r_reloc_init and find_associated_l32r_irel.  Check
	is_relaxable_asm_section flag.  Handle L32R instructions with absolute
	literals.  Pass is_abs_literal flag to init_source_reloc.
	(is_resolvable_asm_expansion): Use bfd_get_section_limit.  Check for
	CONST16 instructions.  Adjust calls to r_reloc_init and
	pcrel_reloc_fits.  Handle weak symbols conservatively.
	(find_associated_l32r_irel): Add bfd parameter and pass it to
	is_l32r_relocation.
	(compute_text_actions, compute_ebb_proposed_actions,
	compute_ebb_actions, check_section_ebb_pcrels_fit,
	check_section_ebb_reduces, text_action_add_proposed,
	compute_fill_extra_space): New.
	(remove_literals): Replace with ...
	(compute_removed_literals): ... this function.  Call
	init_section_cache.  Use bfd_get_section_limit.  Sort internal_relocs.
	Call xtensa_read_table_entries to get the property table.  Skip
	relocations other than R_XTENSA_32 and R_XTENSA_PLT.  Use new
	is_removable_literal, remove_dead_literal, and
	identify_literal_placement functions.
	(get_irel_at_offset): Rewrite to use bsearch on sorted relocations
	instead of linear search.
	(is_removable_literal, remove_dead_literal,
	identify_literal_placement): New.
	(relocations_reach): Update check for literal not referenced by any
	PC-relative relocations.  Adjust call to pcrel_reloc_fits.
	(coalesce_shared_literal, move_shared_literal): New.
	(relax_section): Use bfd_get_section_limit.  Call
	translate_section_fixes.  Update calls to r_reloc_init and
	offset_with_removed_text.  Check new is_relaxable_asm_section flag.
	Add call to pin_internal_relocs.  Add special handling for
	R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs.  Use virtual_offset
	info to calculate new addend_displacement variable.  Replace code for
	deleting literals with more general code to perform the actions
	determined by the action_list for the section.
	(translate_section_fixes, translate_reloc_bfd_fix): New.
	(translate_reloc): Check new is_relaxable_asm_section flag.  Call
	find_removed_literal only if is_operand_relocation.  Update call to
	offset_with_removed_text.  Use new target_offset and removed_bytes
	variables.
	(move_literal): New.
	(relax_property_section):  Use bfd_get_section_limit.  Set new
	is_full_prop_section flag and handle new property tables.  Update calls
	to r_reloc_init and offset_with_removed_text.  Check
	is_relaxable_asm_section flag.  Handle expansion of zero-sized
	unreachable entries, with use of offset_with_removed_text_before_fill.
	For relocatable links, combine entries only for literal tables.
	(relax_section_symbols): Check is_relaxable_asm_section flag.  Update
	calls to offset_with_removed_text.  Translate st_size field for
	function symbols.
	(do_fix_for_relocatable_link): Change to return bfd_boolean to indicate
	failure.  Add contents parameter.  Update call to get_bfd_fix.  Update
	call to r_reloc_init.  Call _bfd_error_handler and return FALSE for
	R_XTENSA_ASM_EXPAND relocs.
	(do_fix_for_final_link): Add input_bfd and contents parameters.  Update
	call to get_bfd_fix.  Include offset from contents for partial_inplace
	relocations.
	(is_reloc_sym_weak): New.
	(pcrel_reloc_fits): Use new xtensa-isa.h functions.
	(prop_sec_len): New.
	(xtensa_is_property_section): Handle new property sections.
	(is_literal_section): Delete.
	(internal_reloc_compare): When r_offset matches, compare r_info and
	r_addend to make sorting predictable.
	(internal_reloc_matches): New.
	(xtensa_get_property_section_name): Handle new property sections.
	(xtensa_get_property_predef_flags): New.
	(xtensa_callback_required_dependence): Use bfd_get_section_limit.
	Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init.
	* xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c.
	(xtisa_errno, xtisa_error_msg): New variables.
	(xtensa_isa_errno, xtensa_isa_error_msg): New.
	(xtensa_insnbuf_alloc): Add error handling.
	(xtensa_insnbuf_to_chars): Add num_chars parameter.  Update to
	use xtensa_format_decode.  Add error handling.
	(xtensa_insnbuf_from_chars): Add num_chars parameter.  Decode the
	instruction length to find the number of bytes to copy.
	(xtensa_isa_init): Add error handling.  Replace calls to
	xtensa_load_isa and xtensa_extend_isa with code to initialize lookup
	tables in the xtensa_modules structure.
	(xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa,
	xtensa_extend_isa): Delete.
	(xtensa_isa_free): Change to only free lookup tables.
	(opname_lookup_compare): Replace with ...
	(xtensa_isa_name_compare): ... this function.  Use strcasecmp.
	(xtensa_insn_maxlength): Rename to ...
	(xtensa_isa_maxlength): ... this.
	(xtensa_insn_length): Delete.
	(xtensa_insn_length_from_first_byte): Replace with ...
	(xtensa_isa_length_from_chars): ... this function.
	(xtensa_num_opcodes): Rename to ...
	(xtensa_isa_num_opcodes): ... this.
	(xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
	xtensa_isa_num_regfiles, xtensa_isa_num_stages,
	xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
	xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
	xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
	xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
	xtensa_format_get_slot, xtensa_format_set_slot): New functions.
	(xtensa_opcode_lookup): Add error handling.
	(xtensa_decode_insn): Replace with ...
	(xtensa_opcode_decode): ... this function, with new format and
	slot parameters.  Add error handling.
	(xtensa_encode_insn): Replace with ...
	(xtensa_opcode_encode): ... this function, which does the encoding via
	one of the entries in the "encode_fns" array.  Add error handling.
	(xtensa_opcode_name): Add error handling.
	(xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop,
	xtensa_opcode_is_call): New.
	(xtensa_num_operands): Replace with ...
	(xtensa_opcode_num_operands): ... this function.  Add error handling.
	(xtensa_opcode_num_stateOperands,
	xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
	xtensa_opcode_funcUnit_use, xtensa_operand_name,
	xtensa_operand_is_visible): New.
	(xtensa_get_operand, xtensa_operand_kind): Delete.
	(xtensa_operand_inout): Add error handling and special-case for
	"sout" operands.
	(xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to
	operate on one slot of an instruction.  Added error handling.
	(xtensa_operand_encode): Handle default operands with no encoding
	functions.  Check for success by comparing against decoded value.
	Add error handling.
	(xtensa_operand_decode): Handle default operands.  Return decoded value
	through argument pointer.  Add error handling.
	(xtensa_operand_is_register, xtensa_operand_regfile,
	xtensa_operand_num_regs, xtensa_operand_is_known_reg): New.
	(xtensa_operand_isPCRelative): Rename to ...
	(xtensa_operand_is_PCrelative): ... this.  Add error handling.
	(xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value
	through argument pointer.  Add error handling.
	(xtensa_stateOperand_state, xtensa_stateOperand_inout,
	xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
	xtensa_regfile_lookup_shortname, xtensa_regfile_name,
	xtensa_regfile_shortname, xtensa_regfile_view_parent,
	xtensa_regfile_num_bits, xtensa_regfile_num_entries,
	xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
	xtensa_state_is_exported, xtensa_sysreg_lookup,
	xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
	xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
	xtensa_interface_num_bits, xtensa_interface_inout,
	xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
	xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New.
	* xtensa-modules.c: Rewrite to use new data structures.
	* reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16,
	BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP,
	BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP,
	BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP,
	BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP,
	BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP,
	BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP,
	BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP,
	BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP,
	BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT,
	BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT,
	BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT,
	BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT,
	BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT,
	BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT,
	BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT,
	BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations.
	* Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Likewise.
	* libbfd.h: Likewise.

gas ChangeLog

	* config/tc-xtensa.c (absolute_literals_supported): New global flag.
	(UNREACHABLE_MAX_WIDTH): Define.
	(XTENSA_FETCH_WIDTH): Delete.
	(cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
	prefer_const16, prefer_l32r): New global variables.
	(LIT4_SECTION_NAME): Define.
	(lit4_state struct): Add lit4_seg_name and lit4_seg fields.
	(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
	(frag_flags struct): New.
	(xtensa_block_info struct): Move from tc-xtensa.h.  Add flags field.
	(subseg_map struct): Add cur_total_freq and cur_target_freq fields.
	(bitfield, bit_is_set, set_bit, clear_bit): Define.
	(MAX_FORMATS): Define.
	(op_placement_info struct, op_placement_table): New.
	(O_pltrel, O_hi16, O_lo16): Define.
	(directiveE enum): Rename directive_generics to directive_transform.
	Delete directive_relax.  Add directive_schedule,
	directive_absolute_literals, and directive_last_directive.
	(directive_info): Rename "generics" to "transform".  Delete "relax".
	Add "schedule" and "absolute-literals".
	(directive_state): Adjust entries to match changes in directive_info.
	(xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
	(xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
	xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
	(xtensa_j_opcode, xtensa_rsr_opcode): Delete.
	(align_only_targets, software_a0_b_retw_interlock,
	software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
	software_avoid_short_loop, software_avoid_close_loop_end,
	software_avoid_all_short_loops, specific_opcode): Delete.
	(warn_unaligned_branch_targets): New.
	(workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
	workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
	(option_[no_]link_relax, option_[no_]transform,
	option_[no_]absolute_literals, option_warn_unaligned_targets,
	option_prefer_l32r, option_prefer_const16, option_target_hardware):
	New enum values.
	(option_[no_]align_only_targets, option_literal_section_name,
	option_text_section_name, option_data_section_name,
	option_bss_section_name, option_eb, option_el): Delete.
	(md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
	warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
	and target-hardware.  Delete entries for [no-]target-align-only,
	literal-section-name, text-section-name, data-section-name, and
	bss-section-name.
	(md_parse_option): Handle new options and remove old ones.  Accept but
	ignore [no-]density options.  Warn for [no-]generics and [no-]relax
	and treat them as [no-]transform.
	(md_show_usage): Add new options and remove old ones.
	(xtensa_setup_hw_workarounds): New.
	(md_pseudo_table): Change "word" entry to use xtensa_elf_cons.  Add
	"long", "short", "loc" and "frequency" entries.
	(use_generics): Rename to ...
	(use_transform): ... this function.  Add past_xtensa_end check.
	(use_longcalls): Add past_xtensa_end check.
	(code_density_available, can_relax): Delete.
	(do_align_targets): New.
	(get_directive): Accept dashes in directive names.  Warn about
	[no-]generics and [no-]relax directives and treat them as
	[no-]transform.
	(xtensa_begin_directive): Call md_flush_pending_output only for some
	directives.  Check for directives inside instruction bundles.  Warn
	about deprecated ".begin literal" usage.  Warn and ignore [no-]density
	directives.  Handle new directives.  Check generating_literals flag
	for literal_prefix.
	(xtensa_end_directive): Check for directives inside instruction
	bundles.  Warn and ignore [no-]density directives.  Handle new
	directives.  Call xtensa_set_frag_assembly_state.
	(xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
	xtensa_dwarf2_emit_insn): New.
	(xtensa_literal_position): Call md_flush_pending_output.  Do not check
	use_literal_section flag.
	(xtensa_literal_pseudo): Call md_flush_pending_output.  Handle absolute
	literals.  Use xtensa_elf_cons to parse the expression.
	(xtensa_literal_prefix): Do not check use_literal_section.  Support
	".lit4" sections for absolute literals.  Change prefix convention to
	replace ".text" (or ".t" in a linkonce section).  No need to call
	subseg_set.
	(xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
	(expression_end): Handle closing braces and colons.
	(PLT_SUFFIX, plt_suffix): Delete.
	(expression_maybe_register): Use new xtensa-isa.h functions.  Use
	xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
	and O_hi16 expressions as well.
	(tokenize_arguments): Handle closing braces and colons.
	(parse_arguments): Use new xtensa-isa.h functions.  Handle "invisible"
	operands and paired register syntax.
	(get_invisible_operands): New.
	(xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax.  Use
	new xtensa-isa.h functions.
	(xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
	(xg_translate_idioms): Check if inside bundle.  Use use_transform.
	Handle new Xtensa LX RSR/WSR/XSR syntax.  Remove code to widen density
	instructions.  Use xtensa_translate_zero_immed.
	(operand_is_immed, operand_is_pcrel_label): Delete.
	(get_relaxable_immed): Use new xtensa-isa.h functions.
	(get_opcode_from_buf): Add slot parameter.  Use new xtensa-isa.h
	functions.
	(xtensa_print_insn_table, print_vliw_insn): New.
	(is_direct_call_opcode): Use new xtensa-isa.h functions.
	(is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
	is_branch_or_jump_opcode): Delete.
	(is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
	(opnum_to_reloc, reloc_to_opnum): Delete.
	(xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
	xtensa-isa.h functions.  Operate on one slot of an instruction.
	(xtensa_insnbuf_set_immediate_field, is_negatable_branch,
	xg_get_insn_size): Delete.
	(xg_get_build_instr_size): Use xg_get_single_size.
	(xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
	xg_build_widen_table.  Use xg_get_single_size.
	(xg_get_max_narrow_insn_size): Delete.
	(xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
	xg_is_relaxable_insn): Update calls to xg_build_widen_table.  Use
	xg_get_single_size.
	(xg_build_to_insn): Record the loc field.  Handle OP_OPERAND_HI16U and
	OP_OPERAND_LOW16U.  Check xg_valid_literal_expression.
	(xg_expand_to_stack, xg_expand_narrow): Update calls to
	xg_build_widen_table.  Use xg_get_single_size.
	(xg_immeds_fit): Use new xtensa-isa.h functions.  Update call to
	xg_check_operand.
	(xg_symbolic_immeds_fit): Likewise.  Also handle O_lo16 and O_hi16, and
	treat weak symbols conservatively.
	(xg_check_operand): Use new xtensa-isa.h functions.
	(is_dnrange): Delete.
	(xg_assembly_relax): Inline previous calls to tinsn_copy.
	(xg_finish_frag): Specify separate relax states for the frag and slot0.
	(is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
	xtensa-isa.h functions.
	(xg_instruction_matches_option_term, xg_instruction_matches_or_options,
	xg_instruction_matches_options): New.
	(xg_instruction_matches_rule): Handle O_register expressions.  Call
	xg_instruction_matches_options.
	(transition_rule_cmp): New.
	(xg_instruction_match): Update call to xg_build_simplify_table.
	(xg_build_token_insn): Record loc fields.
	(xg_simplify_insn): Check is_specific_opcode field and
	density_supported flag.
	(xg_expand_assembly_insn): Skip checking code_density_available.  Use
	new xtensa-isa.h functions.  Call use_transform instead of can_relax.
	(xg_assemble_literal): Add error handling for O_big.  Call
	record_alignment.  Handle O_pltrel.
	(xg_valid_literal_expression): New.
	(xg_assemble_literal_space): Add slot parameter.  Remove call to
	set_expr_symbol_offset.  Add call to record_alignment.  Update call to
	xg_finish_frag.
	(xg_emit_insn): Delete.
	(xg_emit_insn_to_buf): Add format parameter.  Update calls to
	xg_add_opcode_fix and xtensa_insnbuf_to_chars.
	(xg_add_opcode_fix): Change opcode parameter to tinsn and add format
	and slot parameters.  Handle new "alternate" relocations for absolute
	literals and CONST16 instructions.  Check for bad uses of O_lo16 and
	O_hi16.  Use new xtensa-isa.h functions.
	(xg_assemble_tokens): Delete.
	(is_register_writer): Use new xtensa-isa.h functions.
	(is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
	old-style RSR from LCOUNT.
	(next_frag_opcode): Delete.
	(next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
	update_next_frag_state): New.
	(update_next_frag_nop_state): Delete.
	(next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
	(xtensa_mark_literal_pool_location): Check use_literal_section flag and
	the state of the absolute-literals directive.  Add calls to
	record_alignment and xtensa_set_frag_assembly_state.  Call
	xtensa_switch_to_non_abs_literal_fragment instead of
	xtensa_switch_to_literal_fragment.
	(build_nop): New.
	(assemble_nop): Use build_nop.  Update call to xtensa_insnbuf_to_chars.
	(get_expanded_loop_offset): Change check for undefined opcode to an
	assertion.
	(xtensa_set_frag_assembly_state, relaxable_section,
	xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
	xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
	(md_begin): Update call to xtensa_isa_init.  Initialize linkrelax to 1.
	Set lit4_seg_name.  Call xg_init_vinsn.  Initialize new global opcodes.
	Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
	(xtensa_init_fix_data): New.
	(xtensa_frob_label): Reset label symbol to the current frag.  Check
	do_align_targets and generating_literals flag.  Propagate frequency
	info to new alignment frag.  Call xtensa_set_frag_assembly_state.
	(xtensa_unrecognized_line): New.
	(xtensa_flush_pending_output): Check if inside a bundle.  Add a call
	to xtensa_set_frag_assembly_state.
	(error_reset_cur_vinsn): New.
	(md_assemble): Remove check for literal frag.  Remove call to
	istack_init.  Call use_transform instead of use_generics.  Parse
	explicit instruction format specifiers.  Move code for
	a0_b_retw_interlock workaround to xg_assemble_vliw_tokens.  Call
	error_reset_cur_vinsn on errors.  Add call to get_invisible_operands.
	Add dwarf2_where call.  Remote automatic alignment for ENTRY
	instructions.  Move call to xtensa_clear_insn_labels to the end.
	Rearrange to handle bundles.
	(xtensa_cons_fix_new): Delete.
	(xtensa_handle_align): New.
	(xtensa_frag_init): Call xtensa_set_frag_assembly_state.  Remove
	assignment to is_no_density field.
	(md_pcrel_from): Use new xtensa-isa.h functions.  Use decode_reloc
	instead of reloc_to_opnum.  Handle "alternate" relocations.
	(xtensa_force_relocation, xtensa_check_inside_bundle,
	xtensa_elf_section_change_hook): New.
	(xtensa_symbol_new_hook): Delete.
	(xtensa_fix_adjustable): Check for difference of symbols with an
	offset.  Check for external and weak symbols.
	(md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
	(md_estimate_size_before_relax): Return expansion for the first slot.
	(tc_gen_reloc): Handle difference of symbols by producing
	XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
	into the output.  Handle new XTENSA_SLOT*_OP relocs by storing the
	tentative values into the output when linkrelax is set.
	(XTENSA_PROP_SEC_NAME): Define.
	(xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
	Create literal tables only if using literal sections.  Create new
	property tables instead of old instruction tables.  Check for unaligned
	branch targets and loops.
	(finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
	new_resource_table, clear_resource_table, resize_resource_table,
	resources_available, reserve_resources, release_resources,
	opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
	resources_conflict, xg_find_narrowest_format, relaxation_requirements,
	bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
	(xtensa_end): Call xtensa_flush_pending_output.  Set past_xtensa_end
	flag.  Update checks for workaround options.  Call
	xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
	(xtensa_cleanup_align_frags): Add special case for branch targets.
	Check for and mark unreachable frags.
	(xtensa_fix_target_frags): Remove use of align_only_targets flag.
	Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
	end of a zero-overhead loop body.
	(frag_can_negate_branch): Handle instructions with multiple slots.
	Use new xtensa-isa.h functions
	(xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
	xtensa_mark_zcl_first_insns): New.
	(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
	transformations are disabled.
	(next_instrs_are_b_retw): Use new xtensa-isa.h functions.  Handle
	multislot instructions.
	(xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
	Likewise.  Also error if transformations are disabled.
	(unrelaxed_frag_max_size): New.
	(unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
	xtensa-isa.h functions.
	(xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
	xtensa_opcode_is_loop instead of is_loop_opcode.
	(get_text_align_power): Replace as_fatal with assertion.
	(get_text_align_fill_size): Iterate instead of using modulus when
	use_nops is false.
	(get_noop_aligned_address): Assert that this is for a machine-dependent
	RELAX_ALIGN_NEXT_OPCODE frag.  Use next_frag_opcode_is_loop,
	xg_get_single_size, and frag_format_size.
	(get_widen_aligned_address): Rename to ...
	(get_aligned_diff): ... this function.  Add max_diff parameter.
	Remove handling of rs_align/rs_align_code frags.  Use
	next_frag_format_size, get_text_align_power, get_text_align_fill_size,
	next_frag_opcode_is_loop, and xg_get_single_size.  Compute max_diff
	and pass it back to caller.
	(xtensa_relax_frag): Use relax_frag_loop_align.  Add code for new
	RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
	RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types.  Check relax_seen.
	(relax_frag_text_align): Rename to ...
	(relax_frag_loop_align): ... this function.  Assume loops can only be
	in the first slot of an instruction.
	(relax_frag_add_nop): Use assemble_nop instead of constructing an OR
	instruction.  Remove call to frag_wane.
	(relax_frag_narrow): Rename to ...
	(relax_frag_for_align): ... this function.  Extend to handle
	RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
	RELAX_NARROW for the first slot.
	(find_address_of_next_align_frag, bytes_to_stretch): New.
	(future_alignment_required): Use find_address_of_next_align_frag and
	bytes_to_stretch.  Look ahead to subsequent frags to make smarter
	alignment decisions.
	(relax_frag_immed): Add format, slot, and estimate_only parameters.
	Check if transformations are enabled for b_j_loop_end workaround.
	Use new xtensa-isa.h functions and handle multislot instructions.
	Update call to xg_assembly_relax.
	(md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
	RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
	frag types.
	(convert_frag_narrow): Add segP, format and slot parameters.  Call
	convert_frag_immed for branch instructions.  Adjust calls to
	tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf.  Use
	xg_get_single_size and xg_get_single_format.
	(convert_frag_fill_nop): New.
	(convert_frag_immed): Add format and slot parameters.  Handle multislot
	instructions and use new xtensa-isa.h functions.  Update calls to
	tinsn_immed_from_frag and xg_assembly_relax.  Check if transformations
	enabled for b_j_loop_end workaround.  Use build_nop instead of
	assemble_nop.  Check is_specific_opcode flag.  Check for unreachable
	frags.  Use xg_get_single_size.  Handle O_pltrel.
	(fix_new_exp_in_seg): Remove check for old plt flag.
	(convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
	xtensa_insnbuf_to_chars.  Call tinsn_immed_from_frag.  Change check
	for loop opcode to an assertion.  Mark all frags up to the end of the
	loop as not transformable.
	(get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
	(get_subseg_info): New.
	(xtensa_move_literals): Call xtensa_set_frag_assembly_state.  Add null
	check for dest_seg.
	(xtensa_switch_to_literal_fragment): Rewrite to handle absolute
	literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
	(xtensa_switch_to_non_abs_literal_fragment): New.
	(cache_literal_section): Add is_code parameter and pass it through to
	retrieve_literal_seg.
	(retrieve_literal_seg): Add is_code parameter and use it to set the
	flags on the literal section.  Handle case where head parameter is 0.
	(get_frag_is_no_transform, set_frag_is_specific_opcode,
	set_frag_is_no_transform): New.
	(xtensa_create_property_segments): Add end_property_function parameter
	and pass it through to add_xt_block_frags.  Call bfd_get_section_flags
	and skip SEC_DEBUGGING and !SEC_ALLOC sections.
	(xtensa_create_xproperty_segments, section_has_xproperty): New.
	(add_xt_block_frags): Add end_property_function parameter and call it
	if it is non-zero.  Call xtensa_frag_flags_init.
	(xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
	get_frag_property_flags, frag_flags_to_number,
	xtensa_frag_flags_combinable, xt_block_aligned_size,
	xtensa_xt_block_combine, add_xt_prop_frags,
	init_op_placement_info_table, opcode_fits_format_slot,
	xg_get_single_size, xg_get_single_format): New.
	(istack_push): Inline call to tinsn_copy.
	(tinsn_copy): Delete.
	(tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
	CONST16 opcodes.  Handle O_big, O_illegal, and O_absent.
	(tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
	(tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
	functions.  Handle invisible operands.
	(tinsn_to_slotbuf): New.
	(tinsn_check_arguments): Use new xtensa-isa.h functions.
	(tinsn_from_chars): Add slot parameter.  Rewrite using xg_init_vinsn,
	vinsn_from_chars, and xg_free_vinsn.
	(tinsn_from_insnbuf): New.
	(tinsn_immed_from_frag): Add slot parameter and handle multislot
	instructions.  Handle symbol differences.
	(get_num_stack_text_bytes): Use xg_get_single_size.
	(xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
	xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
	get_expr_register, set_expr_symbol_offset_diff): New.
	* config/tc-xtensa.h (MAX_SLOTS): Define.
	(xtensa_relax_statesE): Move from tc-xtensa.c. Add
	RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
	RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
	RELAX_NONE types.
	(RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
	(xtensa_frag_type struct): Add is_assembly_state_set,
	use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
	is_align, is_text_align, alignment, and is_first_loop_insn fields.
	Replace is_generics and is_relax fields by is_no_transform field.
	Delete is_text and is_longcalls fields.  Change text_expansion and
	literal_expansion to arrays of MAX_SLOTS entries.  Add arrays of
	per-slot information: literal_frags, slot_subtypes, slot_symbols,
	slot_sub_symbols, and slot_offsets.  Add fr_prev field.
	(xtensa_fix_data struct): New.
	(xtensa_symfield_type struct): Delete plt field.
	(xtensa_block_info struct): Move definition to tc-xtensa.h.  Add
	forward declaration here.
	(xt_section_type enum): Delete xt_insn_sec.  Add xt_prop_sec.
	(XTENSA_SECTION_RENAME): Undefine.
	(TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
	tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
	HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
	(TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
	(unit_num_copies_func, opcode_num_units_func,
	opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
	(resource_table struct): New.
	* config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
	(TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
	literal_space, symbol, sub_symbol, offset, and literal_frag fields.
	(tinsn_copy): Delete prototype.
	(vliw_insn struct): New.
	* config/xtensa-relax.c (insn_pattern_struct): Add options field.
	(widen_spec_list): Add option conditions for density and boolean
	instructions.  Add expansions using CONST16 and conditions for using
	CONST16 vs. L32R.  Use new Xtensa LX RSR/WSR syntax.  Add entries for
	predicted branches.
	(simplify_spec_list): Add option conditions for density instructions.
	Add entry for NOP instruction.
	(append_transition): Add cmp function pointer parameter and use it to
	insert the new entry in order.
	(operand_function_LOW16U, operand_function_HI16U): New.
	(xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
	OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
	(enter_opname, split_string): Use xstrdup instead of strdup.
	(init_insn_pattern): Initialize new options field.
	(clear_req_or_option_list, clear_req_option_list,
	clone_req_or_option_list, clone_req_option_list, parse_option_cond):
	New.
	(parse_insn_pattern): Parse option conditions.
	(transition_applies): New.
	(build_transition): Use new xtensa-isa.h functions.  Fix incorrectly
	swapped last arguments in calls to append_constant_value_condition.
	Call clone_req_option_list.  Add warning about invalid opcode.
	Handle LOW16U and HI16U function names.
	(build_transition_table): Add cmp parameter and use it in calls to
	append_transition.  Use new xtensa-isa.h functions.  Check
	transition_applies before adding entries.
	(xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
	pass it through to build_transition_table.
	* config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
	ReqOption, transition_cmp_fn): New types.
	(OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
	(transition_rule struct): Add options field.
	* doc/as.texinfo (Overview): Update Xtensa options.
	* doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
	--[no-]relax, and --[no-]generics options.  Update descriptions of
	--text-section-literals and --[no-]longcalls.  Add
	--[no-]absolute-literals and --[no-]transform.
	(Xtensa Syntax): Add description of syntax for FLIX instructions.
	Remove use of "generic" and "specific" terminology for opcodes.
	(Xtensa Registers): Generalize the syntax description to include
	user-defined register files.
	(Xtensa Automatic Alignment): Update.
	(Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
	(Xtensa Call Relaxation): Linker can now remove most of the overhead.
	(Xtensa Directives): Remove confusing rules about precedence.
	(Density Directive, Relax Directive): Delete.
	(Schedule Directive): New.
	(Generics Directive): Rename to ...
	(Transform Directive): ... this node.
	(Literal Directive): Update for absolute literals.  Missing
	literal_position directive is now an error.
	(Literal Position Directive): Update for absolute literals.
	(Freeregs Directive): Delete.
	(Absolute Literals Directive): New.
	(Frame Directive): Minor editing.
	* Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
	Update dependencies.
	* Makefile.in: Regenerate.

gas/testsuite ChangeLog

	* gas/xtensa/all.exp: Adjust expected error message for j_too_far.
	Change entry_align test to expect an error.
	* gas/xtensa/entry_misalign2.s: Use no-transform instead of
	no-generics directives.

include ChangeLog

	* xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS,
	XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New.
	(XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete.
	* xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete.
	(config_sturct struct): Delete.
	(XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE,
	XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN,
	XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP,
	XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL,
	XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define.
	(xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New.
	(xtensa_insn_decode_fn): Rename to ...
	(xtensa_opcode_decode_fn): ... this.
	(xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn,
	xtensa_undo_reloc_fn): Update.
	(xtensa_encoding_template_fn): Delete.
	(xtensa_opcode_encode_fn, xtensa_format_decode_fn,
	xtensa_length_decode_fn): New.
	(xtensa_format_internal, xtensa_slot_internal): New types.
	(xtensa_operand_internal): Delete operand_kind, inout, isPCRelative,
	get_field, and set_field fields.  Add name, field_id, regfile,
	num_regs, and flags fields.
	(xtensa_arg_internal): New type.
	(xtensa_iclass_internal): Change operands field to array of
	xtensa_arg_internal.  Add num_stateOperands, stateOperands,
	num_interfaceOperands, and interfaceOperands fields.
	(xtensa_opcode_internal): Delete length, template, and iclass fields.
	Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses.
	(opname_lookup_entry): Delete.
	(xtensa_regfile_internal, xtensa_interface_internal,
	xtensa_funcUnit_internal, xtensa_state_internal,
	xtensa_sysreg_internal, xtensa_lookup_entry): New.
	(xtensa_isa_internal): Replace opcode_table field with opcodes field.
	Change type of opname_lookup_table.  Delete num_modules,
	module_opcode_base, module_decode_fn, config, and has_density fields.
	Add num_formats, formats, format_decode_fn, length_decode_fn,
	num_slots, slots, num_fields, num_operands, operands, num_iclasses,
	iclasses, num_regfiles, regfiles, num_states, states,
	state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table,
	max_sysreg_num, sysreg_table, num_interfaces, interfaces,
	interface_lookup_table, num_funcUnits, funcUnits and
	funcUnit_lookup_table fields.
	(xtensa_isa_module, xtensa_isa_modules): Delete.
	(xtensa_isa_name_compare): New prototype.
	(xtisa_errno, xtisa_error_msg): New.
	* xtensa-isa.h (XTENSA_ISA_VERSION): Define.
	(xtensa_isa): Change type.
	(xtensa_operand): Delete.
	(xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg,
	xtensa_interface, xtensa_funcUnit, xtensa_isa_status,
	xtensa_funcUnit_use): New types.
	(libisa_module_specifier): Delete.
	(xtensa_isa_errno, xtensa_isa_error_msg): New prototypes.
	(xtensa_insnbuf_free, xtensa_insnbuf_to_chars,
	xtensa_insnbuf_from_chars): Update prototypes.
	(xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa,
	xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn,
	xtensa_encode_insn, xtensa_insn_length,
	xtensa_insn_length_from_first_byte, xtensa_num_operands,
	xtensa_operand_kind, xtensa_encode_result,
	xtensa_operand_isPCRelative): Delete.
	(xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field,
	xtensa_operand_set_field, xtensa_operand_encode,
	xtensa_operand_decode, xtensa_operand_do_reloc,
	xtensa_operand_undo_reloc): Update prototypes.
	(xtensa_isa_maxlength, xtensa_isa_length_from_chars,
	xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
	xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states,
	xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
	xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
	xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
	xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
	xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode,
	xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump,
	xtensa_opcode_is_loop, xtensa_opcode_is_call,
	xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands,
	xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
	xtensa_opcode_funcUnit_use, xtensa_operand_name,
	xtensa_operand_is_visible, xtensa_operand_is_register,
	xtensa_operand_regfile, xtensa_operand_num_regs,
	xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative,
	xtensa_stateOperand_state, xtensa_stateOperand_inout,
	xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
	xtensa_regfile_lookup_shortname, xtensa_regfile_name,
	xtensa_regfile_shortname, xtensa_regfile_view_parent,
	xtensa_regfile_num_bits, xtensa_regfile_num_entries,
	xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
	xtensa_state_is_exported, xtensa_sysreg_lookup,
	xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
	xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
	xtensa_interface_num_bits, xtensa_interface_inout,
	xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
	xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes.
	* elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
	R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
	(XTENSA_PROP_SEC_NAME): Define.
	(property_table_entry): Add flags field.
	(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.

ld ChangeLog

	* ld.texinfo (Xtensa): Describe new linker relaxation to optimize
	assembler-generated longcall sequences.  Describe new --size-opt
	option.
	* emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section.
	* emultempl/xtensaelf.em (remove_section,
	replace_insn_sec_with_prop_sec, replace_instruction_table_sections,
	elf_xtensa_after_open): New.
	(OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT,
	OPTION_NO_LITERAL_MOVEMENT): Define.
	(elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals.
	(PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement.
	(PARSE_AND_LIST_OPTIONS): Add --size-opt.
	(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT,
	OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT.
	(LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open.
	* scripttempl/elfxtensa.sc: Update with changes from elf.sc.
	* Makefile.am (eelf32xtensa.c): Update dependencies.
	* Makefile.in: Regenerate.

ld/testsuite ChangeLog

	* ld-xtensa/lcall1.s: Use .literal directive.
	* ld-xtensa/lcall2.s: Align function entry.
	* ld-xtensa/coalesce2.s: Likewise.

opcodes ChangeLog

	* xtensa-dis.c (state_names): Delete.
	(fetch_data): Use xtensa_isa_maxlength.
	(print_xtensa_operand): Replace operand parameter with opcode/operand
	pair.  Remove print_sr_name parameter.  Use new xtensa-isa.h functions.
	(print_insn_xtensa): Use new xtensa-isa.h functions.  Handle multislot
	instruction bundles.  Use xmalloc instead of malloc.

1 files changed, 297 insertions, 41 deletions

diff --git a/gas/config/tc-xtensa.h b/gas/config/tc-xtensa.h
index cf4a3507b1..3be75c74f3 100644
--- a/gas/config/tc-xtensa.h
+++ b/gas/config/tc-xtensa.h
@@ -1,5 +1,5 @@
 /* tc-xtensa.h -- Header file for tc-xtensa.c.
-   Copyright (C) 2003 Free Software Foundation, Inc.
+   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
 
    This file is part of GAS, the GNU Assembler.
 
@@ -33,61 +33,250 @@ struct fix;
 #error Xtensa support requires ELF object format
 #endif
 
+#include "xtensa-isa.h"
 #include "xtensa-config.h"
 
 #define TARGET_BYTES_BIG_ENDIAN XCHAL_HAVE_BE
 
 
+/* Maximum number of opcode slots in a VLIW instruction.  */
+#define MAX_SLOTS 31
+
+
+/* For all xtensa relax states except RELAX_DESIRE_ALIGN and
+   RELAX_DESIRE_ALIGN_IF_TARGET, the amount a frag might grow is stored
+   in the fr_var field.  For the two exceptions, fr_var is a float value
+   that records the frequency with which the following instruction is
+   executed as a branch target.  The aligner uses this information to
+   tell which targets are most important to be aligned.  */
+
+enum xtensa_relax_statesE
+{
+  RELAX_ALIGN_NEXT_OPCODE,
+  /* Use the first opcode of the next fragment to determine the
+     alignment requirements.  This is ONLY used for LOOPs currently.  */
+
+  RELAX_CHECK_ALIGN_NEXT_OPCODE,
+  /* The next non-empty frag contains a loop instruction.  Check to see
+     if it is correctly aligned, but do not align it.  */
+
+  RELAX_DESIRE_ALIGN_IF_TARGET,
+  /* These are placed in front of labels and converted to either
+     RELAX_DESIRE_ALIGN / RELAX_LOOP_END or rs_fill of 0 before
+     relaxation begins.  */
+
+  RELAX_ADD_NOP_IF_A0_B_RETW,
+  /* These are placed in front of conditional branches.  Before
+     relaxation begins, they are turned into either NOPs for branches
+     immediately followed by RETW or RETW.N or rs_fills of 0.  This is
+     used to avoid a hardware bug in some early versions of the
+     processor.  */
+
+  RELAX_ADD_NOP_IF_PRE_LOOP_END,
+  /* These are placed after JX instructions.  Before relaxation begins,
+     they are turned into either NOPs, if the JX is one instruction
+     before a loop end label, or rs_fills of 0.  This is used to avoid a
+     hardware interlock issue prior to Xtensa version T1040.  */
+
+  RELAX_ADD_NOP_IF_SHORT_LOOP,
+  /* These are placed after LOOP instructions and turned into NOPs when:
+     (1) there are less than 3 instructions in the loop; we place 2 of
+     these in a row to add up to 2 NOPS in short loops; or (2) the
+     instructions in the loop do not include a branch or jump.
+     Otherwise they are turned into rs_fills of 0 before relaxation
+     begins.  This is used to avoid hardware bug PR3830.  */
+
+  RELAX_ADD_NOP_IF_CLOSE_LOOP_END,
+  /* These are placed after LOOP instructions and turned into NOPs if
+     there are less than 12 bytes to the end of some other loop's end.
+     Otherwise they are turned into rs_fills of 0 before relaxation
+     begins.  This is used to avoid hardware bug PR3830.  */
+
+  RELAX_DESIRE_ALIGN,
+  /* The next fragment would like its first instruction to NOT cross an
+     instruction fetch boundary.  */
+
+  RELAX_MAYBE_DESIRE_ALIGN,
+  /* The next fragment might like its first instruction to NOT cross an
+     instruction fetch boundary.  These are placed after a branch that
+     might be relaxed.  If the branch is relaxed, then this frag will be
+     a branch target and this frag will be changed to RELAX_DESIRE_ALIGN
+     frag.  */
+
+  RELAX_LOOP_END,
+  /* This will be turned into a NOP or NOP.N if the previous instruction
+     is expanded to negate a loop.  */
+
+  RELAX_LOOP_END_ADD_NOP,
+  /* When the code density option is available, this will generate a
+     NOP.N marked RELAX_NARROW.  Otherwise, it will create an rs_fill
+     fragment with a NOP in it.  */
+
+  RELAX_LITERAL,
+  /* Another fragment could generate an expansion here but has not yet.  */
+
+  RELAX_LITERAL_NR,
+  /* Expansion has been generated by an instruction that generates a
+     literal.  However, the stretch has NOT been reported yet in this
+     fragment.  */
+
+  RELAX_LITERAL_FINAL,
+  /* Expansion has been generated by an instruction that generates a
+     literal.  */
+
+  RELAX_LITERAL_POOL_BEGIN,
+  RELAX_LITERAL_POOL_END,
+  /* Technically these are not relaxations at all but mark a location
+     to store literals later.  Note that fr_var stores the frchain for
+     BEGIN frags and fr_var stores now_seg for END frags.  */
+
+  RELAX_NARROW,
+  /* The last instruction in this fragment (at->fr_opcode) can be
+     freely replaced with a single wider instruction if a future
+     alignment desires or needs it.  */
+
+  RELAX_IMMED,
+  /* The last instruction in this fragment (at->fr_opcode) contains
+     the value defined by fr_symbol (fr_offset = 0).  If the value
+     does not fit, use the specified expansion.  This is similar to
+     "NARROW", except that these may not be expanded in order to align
+     code.  */
+  
+  RELAX_IMMED_STEP1,
+  /* The last instruction in this fragment (at->fr_opcode) contains a
+     literal.  It has already been expanded at least 1 step.  */
+
+  RELAX_IMMED_STEP2,
+  /* The last instruction in this fragment (at->fr_opcode) contains a
+     literal.  It has already been expanded at least 2 steps.  */
+
+  RELAX_SLOTS,
+  /* There are instructions within the last VLIW instruction that need
+     relaxation.  Find the relaxation based on the slot info in
+     xtensa_frag_type.  Relaxations that deal with particular opcodes
+     are slot-based (e.g., converting a MOVI to an L32R).  Relaxations
+     that deal with entire instructions, such as alignment, are not
+     slot-based.  */
+
+  RELAX_FILL_NOP,
+  /* This marks the location of a pipeline stall.  We can fill these guys
+     in for alignment of any size.  */
+
+  RELAX_UNREACHABLE,
+  /* This marks the location as unreachable.  The assembler may widen or
+     narrow this area to meet alignment requirements of nearby
+     instructions.  */
+
+  RELAX_MAYBE_UNREACHABLE,
+  /* This marks the location as possibly unreachable.  These are placed
+     after a branch that may be relaxed into a branch and jump. If the
+     branch is relaxed, then this frag will be converted to a 
+     RELAX_UNREACHABLE frag.  */
+
+  RELAX_NONE
+};
+
+/* This is used as a stopper to bound the number of steps that
+   can be taken.  */
+#define RELAX_IMMED_MAXSTEPS (RELAX_IMMED_STEP2 - RELAX_IMMED)
+
 struct xtensa_frag_type
 {
-  unsigned is_literal:1;
-  unsigned is_text:1;
-  unsigned is_loop_target:1;
-  unsigned is_branch_target:1;
-  unsigned is_insn:1;
+  /* Info about the current state of assembly, e.g., transform,
+     absolute_literals, etc.  These need to be passed to the backend and
+     then to the object file.
+
+     When is_assembly_state_set is false, the frag inherits some of the
+     state settings from the previous frag in this segment.  Because it
+     is not possible to intercept all fragment closures (frag_more and
+     frag_append_1_char can close a frag), we use a pass after initial
+     assembly to fill in the assembly states.  */
+
+  unsigned int is_assembly_state_set : 1;
+  unsigned int is_no_density : 1;
+  unsigned int is_no_transform : 1;
+  unsigned int use_absolute_literals : 1;
+
+  /* Inhibits relaxation of machine-dependent alignment frags the
+     first time through a relaxation....  */
+  unsigned int relax_seen : 1;
+
+  /* Infomation that is needed in the object file and set when known.  */
+  unsigned int is_literal : 1;
+  unsigned int is_loop_target : 1;
+  unsigned int is_branch_target : 1;
+  unsigned int is_insn : 1;
+  unsigned int is_unreachable : 1;
 
-  /* Info about the current state of assembly, i.e., density, relax,
-     generics, freeregs, longcalls.  These need to be passed to the
-     backend and then to the linking file.  */
+  unsigned int is_specific_opcode : 1; /* also implies no_transform */
 
-  unsigned is_no_density:1;
-  unsigned is_relax:1;
-  unsigned is_generics:1;
-  unsigned is_longcalls:1;
+  unsigned int is_align : 1;
+  unsigned int is_text_align : 1;
+  unsigned int alignment : 5;
+
+  /* A frag with this bit set is the first in a loop that actually
+     contains an instruction.  */
+  unsigned int is_first_loop_insn : 1;
 
   /* For text fragments that can generate literals at relax time, this
      variable points to the frag where the literal will be stored.  For
      literal frags, this variable points to the nearest literal pool
      location frag.  This literal frag will be moved to after this
      location.  */
-
   fragS *literal_frag;
 
   /* The destination segment for literal frags.  (Note that this is only
      valid after xtensa_move_literals.  */
-
   segT lit_seg;
 
   /* For the relaxation scheme, some literal fragments can have their
      expansions modified by an instruction that relaxes.  */
-
-  unsigned text_expansion;
-  unsigned literal_expansion;
-  unsigned unreported_expansion;
+  int text_expansion[MAX_SLOTS];
+  int literal_expansion[MAX_SLOTS];
+  int unreported_expansion;
+
+  /* For text fragments that can generate literals at relax time:  */
+  fragS *literal_frags[MAX_SLOTS];
+  enum xtensa_relax_statesE slot_subtypes[MAX_SLOTS];
+  symbolS *slot_symbols[MAX_SLOTS];
+  symbolS *slot_sub_symbols[MAX_SLOTS];
+  offsetT slot_offsets[MAX_SLOTS];
+
+  /* The global aligner needs to walk backward through the list of
+     frags.  This field is only valid after xtensa_end.  */
+  fragS *fr_prev;
 };
 
-typedef struct xtensa_block_info_struct
+
+/* For VLIW support, we need to know what slot a fixup applies to.  */
+typedef struct xtensa_fix_data_struct
+{
+  int slot;
+  symbolS *X_add_symbol;
+  offsetT X_add_number;
+} xtensa_fix_data;
+
+
+/* Structure to record xtensa-specific symbol information.  */
+typedef struct xtensa_symfield_type
 {
-  segT sec;
-  bfd_vma offset;
-  size_t size;
-  struct xtensa_block_info_struct *next;
-} xtensa_block_info;
+  unsigned int is_loop_target : 1;
+  unsigned int is_branch_target : 1;
+} xtensa_symfield_type;
+
+
+/* Structure for saving information about a block of property data
+   for frags that have the same flags.   The forward reference is
+   in this header file.  The actual definition is in tc-xtensa.c.  */
+struct xtensa_block_info_struct;
+typedef struct xtensa_block_info_struct xtensa_block_info;
+
 
+/* Property section types.  */
 typedef enum
 {
-  xt_insn_sec,
   xt_literal_sec,
+  xt_prop_sec,
   max_xt_sec
 } xt_section_type;
 
@@ -97,17 +286,9 @@ typedef struct xtensa_segment_info_struct
   xtensa_block_info *blocks[max_xt_sec];
 } xtensa_segment_info;
 
-typedef struct xtensa_symfield_type_struct
-{
-  unsigned int plt : 1;
-  unsigned int is_loop_target : 1;
-  unsigned int is_branch_target : 1;
-} xtensa_symfield_type;
-
 
 /* Section renaming is only supported in Tensilica's version of GAS.  */
-#define XTENSA_SECTION_RENAME 1
-#ifdef  XTENSA_SECTION_RENAME
+#ifdef XTENSA_SECTION_RENAME
 extern const char *xtensa_section_rename
   PARAMS ((const char *));
 #else
@@ -118,10 +299,12 @@ extern const char *xtensa_section_rename
 
 extern const char *xtensa_target_format
   PARAMS ((void));
+extern void xtensa_init_fix_data
+  PARAMS ((struct fix *));
 extern void xtensa_frag_init
   PARAMS ((fragS *));
-extern void xtensa_cons_fix_new
-  PARAMS ((fragS *, int, int, expressionS *));
+extern int xtensa_force_relocation
+  PARAMS ((struct fix *));
 extern void xtensa_frob_label
   PARAMS ((struct symbol *));
 extern void xtensa_end
@@ -138,19 +321,32 @@ extern void xtensa_symbol_new_hook
   PARAMS ((symbolS *));
 extern long xtensa_relax_frag
   PARAMS ((fragS *, long, int *));
+extern void xtensa_elf_section_change_hook
+  PARAMS ((void));
+extern int xtensa_unrecognized_line
+  PARAMS ((int));
+extern bfd_boolean xtensa_check_inside_bundle
+  PARAMS ((void));
+extern void xtensa_handle_align
+  PARAMS ((fragS *));
 
 #define TARGET_FORMAT			xtensa_target_format ()
 #define TARGET_ARCH			bfd_arch_xtensa
 #define TC_SEGMENT_INFO_TYPE		xtensa_segment_info
-#define TC_SYMFIELD_TYPE		xtensa_symfield_type
+#define TC_SYMFIELD_TYPE                struct xtensa_symfield_type
+#define TC_FIX_TYPE			xtensa_fix_data
+#define TC_INIT_FIX_DATA(x)		xtensa_init_fix_data (x)
 #define TC_FRAG_TYPE			struct xtensa_frag_type
 #define TC_FRAG_INIT(frag)		xtensa_frag_init (frag)
-#define TC_CONS_FIX_NEW			xtensa_cons_fix_new
+#define TC_FORCE_RELOCATION(fix)	xtensa_force_relocation (fix)
+#define NO_PSEUDO_DOT			xtensa_check_inside_bundle ()
 #define tc_canonicalize_symbol_name(s)	xtensa_section_rename (s)
 #define tc_init_after_args()		xtensa_file_arch_init (stdoutput)
 #define tc_fix_adjustable(fix)		xtensa_fix_adjustable (fix)
 #define tc_frob_label(sym)		xtensa_frob_label (sym)
-#define tc_symbol_new_hook(s)		xtensa_symbol_new_hook (s)
+#define tc_unrecognized_line(ch)	xtensa_unrecognized_line (ch)
+#define md_do_align(a,b,c,d,e)		xtensa_flush_pending_output ()
+#define md_elf_section_change_hook	xtensa_elf_section_change_hook
 #define md_elf_section_rename(name)	xtensa_section_rename (name)
 #define md_end				xtensa_end
 #define md_flush_pending_output()	xtensa_flush_pending_output ()
@@ -158,6 +354,7 @@ extern long xtensa_relax_frag
 #define TEXT_SECTION_NAME		xtensa_section_rename (".text")
 #define DATA_SECTION_NAME		xtensa_section_rename (".data")
 #define BSS_SECTION_NAME		xtensa_section_rename (".bss")
+#define HANDLE_ALIGN(fragP)		xtensa_handle_align (fragP)
 
 
 /* The renumber_section function must be mapped over all the sections
@@ -188,7 +385,66 @@ extern long xtensa_relax_frag
 #define DOUBLESLASH_LINE_COMMENTS
 #define TC_HANDLES_FX_DONE
 #define TC_FINALIZE_SYMS_BEFORE_SIZE_SEG 0
-
+#define TC_LINKRELAX_FIXUP(SEG) 0
 #define MD_APPLY_SYM_VALUE(FIX) 0
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 0
+
+
+/* Resource reservation info functions.  */
+
+/* Returns the number of copies of a particular unit.  */
+typedef int (*unit_num_copies_func) (void *, xtensa_funcUnit);
+
+/* Returns the number of units the opcode uses.  */
+typedef int (*opcode_num_units_func) (void *, xtensa_opcode);
+
+/* Given an opcode and an index into the opcode's funcUnit list, 
+   returns the unit used for the index.  */
+typedef int (*opcode_funcUnit_use_unit_func) (void *, xtensa_opcode, int);
+
+/* Given an opcode and an index into the opcode's funcUnit list, 
+   returns the cycle during which the unit is used.  */
+typedef int (*opcode_funcUnit_use_stage_func) (void *, xtensa_opcode, int);
+
+/* The above typedefs parameterize the resource_table so that the 
+   optional scheduler doesn't need its own resource reservation system.
+   
+   For simple resource checking, which is all that happens normally, 
+   the functions will be as follows (with some wrapping to make the 
+   interface more convenient): 
+
+   unit_num_copies_func = xtensa_funcUnit_num_copies
+   opcode_num_units_func = xtensa_opcode_num_funcUnit_uses
+   opcode_funcUnit_use_unit_func = xtensa_opcode_funcUnit_use->unit
+   opcode_funcUnit_use_stage_func = xtensa_opcode_funcUnit_use->stage
+
+   Of course the optional scheduler has its own reservation table 
+   and functions.  */
+
+int opcode_funcUnit_use_unit PARAMS ((void *, xtensa_opcode, int));
+int opcode_funcUnit_use_stage PARAMS ((void *, xtensa_opcode, int));
+
+typedef struct
+{
+  void *data;
+  int cycles;
+  int allocated_cycles;
+  int num_units;
+  unit_num_copies_func unit_num_copies;
+  opcode_num_units_func opcode_num_units;
+  opcode_funcUnit_use_unit_func opcode_unit_use;
+  opcode_funcUnit_use_stage_func opcode_unit_stage;
+  char **units;
+} resource_table;
+
+resource_table *new_resource_table 
+  PARAMS ((void *, int, int, unit_num_copies_func, opcode_num_units_func, 
+	   opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func));
+void resize_resource_table PARAMS ((resource_table *, int));
+void clear_resource_table PARAMS ((resource_table *));
+bfd_boolean resources_available
+  PARAMS ((resource_table *, xtensa_opcode, int));
+void reserve_resources PARAMS ((resource_table *, xtensa_opcode, int));
+void release_resources PARAMS ((resource_table *, xtensa_opcode, int));
 
 #endif /* TC_XTENSA */