bfd/

2005-02-21  H.J. Lu  <hongjiu.lu@intel.com>

	* coffcode.h (sec_to_styp_flags): Replaced SEC_CLINK with
	SEC_TIC54X_CLINK. Replace SEC_BLOCK with SEC_TIC54X_BLOCK.
	Replace SEC_SHARED with SEC_COFF_SHARED.
	(styp_to_sec_flags): Likewise.

	* elfxx-target.h (TARGET_BIG_SYM): Remove SEC_ARCH_BIT_0.
	(TARGET_LITTLE_SYM): Likewise.

	* section.c (SEC_ARCH_BIT_0): Removed.
	(SEC_LINK_DUPLICATES_SAME_CONTENTS): Defined with
	SEC_LINK_DUPLICATES_ONE_ONLY and SEC_LINK_DUPLICATES_SAME_SIZE.
	(SEC_SHARED): Renamed to ...
	(SEC_COFF_SHARED): This.
	(SEC_BLOCK): Renamed to ...
	(SEC_TIC54X_BLOCK): This.
	(SEC_CLINK): Renamed to ...
	(SEC_TIC54X_CLINK): This.
	(SEC_XXX): Rearranged. Move SEC_COFF_SHARED_LIBRARY,
	SEC_COFF_SHARED, SEC_TIC54X_BLOCK and SEC_TIC54X_CLINK to the
	end.
	* bfd-in2.h: Regenerated.

binutils/

2005-02-21  H.J. Lu  <hongjiu.lu@intel.com>

	* objcopy.c (parse_flags): Replace SEC_SHARED with
	SEC_COFF_SHARED.

	* objdump.c (dump_section_header): Dump SEC_TIC54X_BLOCK and
	SEC_TIC54X_CLINK for TI c54x only. Remove SEC_ARCH_BIT_0. Dump
	SEC_COFF_SHARED for COFF only.

gas/

2005-02-21  H.J. Lu  <hongjiu.lu@intel.com>

	* config/obj-coff.c (obj_coff_section): Replace SEC_SHARED with
	SEC_COFF_SHARED.

	* config/tc-tic54x.c (tic54x_bss): Replace SEC_BLOCK with
	SEC_TIC54X_BLOCK.
	(demand_empty_rest_of_line): Likewise.
	(tic54x_sblock): Likewise.
	(tic54x_clink): Replace with SEC_CLINK with SEC_TIC54X_CLINK.

ld/

2005-02-21  H.J. Lu  <hongjiu.lu@intel.com>

	* ldlang.c (lang_add_section): Check SEC_TIC54X_BLOCK for TI
	tic54x input only.
	(lang_size_sections_1): Check SEC_COFF_SHARED_LIBRARY for COFF
	and ECOFF output only.

1 files changed, 53 insertions, 56 deletions

diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h
index 930c2427ec..65a076d27d 100644
--- a/bfd/bfd-in2.h
+++ b/bfd/bfd-in2.h
@@ -1075,23 +1075,17 @@ typedef struct bfd_section
      some relocation information too.  */
 #define SEC_RELOC      0x004
 
-  /* ELF reserves 4 processor specific bits and 8 operating system
-     specific bits in sh_flags; at present we can get away with just
-     one in communicating between the assembler and BFD, but this
-     isn't a good long-term solution.  */
-#define SEC_ARCH_BIT_0 0x008
-
   /* A signal to the OS that the section contains read only data.  */
-#define SEC_READONLY   0x010
+#define SEC_READONLY   0x008
 
   /* The section contains code only.  */
-#define SEC_CODE       0x020
+#define SEC_CODE       0x010
 
   /* The section contains data only.  */
-#define SEC_DATA       0x040
+#define SEC_DATA       0x020
 
   /* The section will reside in ROM.  */
-#define SEC_ROM        0x080
+#define SEC_ROM        0x040
 
   /* The section contains constructor information. This section
      type is used by the linker to create lists of constructors and
@@ -1103,30 +1097,19 @@ typedef struct bfd_section
      sections called <<__CTOR_LIST__>> and relocate the data
      contained within - exactly the operations it would peform on
      standard data.  */
-#define SEC_CONSTRUCTOR 0x100
+#define SEC_CONSTRUCTOR 0x080
 
   /* The section has contents - a data section could be
      <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
      <<SEC_HAS_CONTENTS>>  */
-#define SEC_HAS_CONTENTS 0x200
+#define SEC_HAS_CONTENTS 0x100
 
   /* An instruction to the linker to not output the section
      even if it has information which would normally be written.  */
-#define SEC_NEVER_LOAD 0x400
-
-  /* The section is a COFF shared library section.  This flag is
-     only for the linker.  If this type of section appears in
-     the input file, the linker must copy it to the output file
-     without changing the vma or size.  FIXME: Although this
-     was originally intended to be general, it really is COFF
-     specific (and the flag was renamed to indicate this).  It
-     might be cleaner to have some more general mechanism to
-     allow the back end to control what the linker does with
-     sections.  */
-#define SEC_COFF_SHARED_LIBRARY 0x800
+#define SEC_NEVER_LOAD 0x200
 
   /* The section contains thread local data.  */
-#define SEC_THREAD_LOCAL 0x1000
+#define SEC_THREAD_LOCAL 0x400
 
   /* The section has GOT references.  This flag is only for the
      linker, and is currently only used by the elf32-hppa back end.
@@ -1134,46 +1117,46 @@ typedef struct bfd_section
      in this section, which indicate to the linker that the section
      contains PIC code, and must be handled specially when doing a
      static link.  */
-#define SEC_HAS_GOT_REF 0x4000
+#define SEC_HAS_GOT_REF 0x800
 
   /* The section contains common symbols (symbols may be defined
      multiple times, the value of a symbol is the amount of
      space it requires, and the largest symbol value is the one
      used).  Most targets have exactly one of these (which we
      translate to bfd_com_section_ptr), but ECOFF has two.  */
-#define SEC_IS_COMMON 0x8000
+#define SEC_IS_COMMON 0x1000
 
   /* The section contains only debugging information.  For
      example, this is set for ELF .debug and .stab sections.
      strip tests this flag to see if a section can be
      discarded.  */
-#define SEC_DEBUGGING 0x10000
+#define SEC_DEBUGGING 0x2000
 
   /* The contents of this section are held in memory pointed to
      by the contents field.  This is checked by bfd_get_section_contents,
      and the data is retrieved from memory if appropriate.  */
-#define SEC_IN_MEMORY 0x20000
+#define SEC_IN_MEMORY 0x4000
 
   /* The contents of this section are to be excluded by the
      linker for executable and shared objects unless those
      objects are to be further relocated.  */
-#define SEC_EXCLUDE 0x40000
+#define SEC_EXCLUDE 0x8000
 
   /* The contents of this section are to be sorted based on the sum of
      the symbol and addend values specified by the associated relocation
      entries.  Entries without associated relocation entries will be
      appended to the end of the section in an unspecified order.  */
-#define SEC_SORT_ENTRIES 0x80000
+#define SEC_SORT_ENTRIES 0x10000
 
   /* When linking, duplicate sections of the same name should be
      discarded, rather than being combined into a single section as
      is usually done.  This is similar to how common symbols are
      handled.  See SEC_LINK_DUPLICATES below.  */
-#define SEC_LINK_ONCE 0x100000
+#define SEC_LINK_ONCE 0x20000
 
   /* If SEC_LINK_ONCE is set, this bitfield describes how the linker
      should handle duplicate sections.  */
-#define SEC_LINK_DUPLICATES 0x600000
+#define SEC_LINK_DUPLICATES 0x40000
 
   /* This value for SEC_LINK_DUPLICATES means that duplicate
      sections with the same name should simply be discarded.  */
@@ -1182,55 +1165,69 @@ typedef struct bfd_section
   /* This value for SEC_LINK_DUPLICATES means that the linker
      should warn if there are any duplicate sections, although
      it should still only link one copy.  */
-#define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000
+#define SEC_LINK_DUPLICATES_ONE_ONLY 0x80000
 
   /* This value for SEC_LINK_DUPLICATES means that the linker
      should warn if any duplicate sections are a different size.  */
-#define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000
+#define SEC_LINK_DUPLICATES_SAME_SIZE 0x100000
 
   /* This value for SEC_LINK_DUPLICATES means that the linker
      should warn if any duplicate sections contain different
      contents.  */
-#define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000
+#define SEC_LINK_DUPLICATES_SAME_CONTENTS \
+  (SEC_LINK_DUPLICATES_ONE_ONLY | SEC_LINK_DUPLICATES_SAME_SIZE)
 
   /* This section was created by the linker as part of dynamic
      relocation or other arcane processing.  It is skipped when
      going through the first-pass output, trusting that someone
      else up the line will take care of it later.  */
-#define SEC_LINKER_CREATED 0x800000
+#define SEC_LINKER_CREATED 0x200000
 
   /* This section should not be subject to garbage collection.  */
-#define SEC_KEEP 0x1000000
+#define SEC_KEEP 0x400000
 
   /* This section contains "short" data, and should be placed
      "near" the GP.  */
-#define SEC_SMALL_DATA 0x2000000
-
-  /* This section contains data which may be shared with other
-     executables or shared objects.  */
-#define SEC_SHARED 0x4000000
-
-  /* When a section with this flag is being linked, then if the size of
-     the input section is less than a page, it should not cross a page
-     boundary.  If the size of the input section is one page or more, it
-     should be aligned on a page boundary.  */
-#define SEC_BLOCK 0x8000000
-
-  /* Conditionally link this section; do not link if there are no
-     references found to any symbol in the section.  */
-#define SEC_CLINK 0x10000000
+#define SEC_SMALL_DATA 0x800000
 
   /* Attempt to merge identical entities in the section.
      Entity size is given in the entsize field.  */
-#define SEC_MERGE 0x20000000
+#define SEC_MERGE 0x1000000
 
   /* If given with SEC_MERGE, entities to merge are zero terminated
      strings where entsize specifies character size instead of fixed
      size entries.  */
-#define SEC_STRINGS 0x40000000
+#define SEC_STRINGS 0x2000000
 
   /* This section contains data about section groups.  */
-#define SEC_GROUP 0x80000000
+#define SEC_GROUP 0x4000000
+
+  /* The section is a COFF shared library section.  This flag is
+     only for the linker.  If this type of section appears in
+     the input file, the linker must copy it to the output file
+     without changing the vma or size.  FIXME: Although this
+     was originally intended to be general, it really is COFF
+     specific (and the flag was renamed to indicate this).  It
+     might be cleaner to have some more general mechanism to
+     allow the back end to control what the linker does with
+     sections.  */
+#define SEC_COFF_SHARED_LIBRARY 0x10000000
+
+  /* This section contains data which may be shared with other
+     executables or shared objects. This is for COFF only.  */
+#define SEC_COFF_SHARED 0x20000000
+
+  /* When a section with this flag is being linked, then if the size of
+     the input section is less than a page, it should not cross a page
+     boundary.  If the size of the input section is one page or more,
+     it should be aligned on a page boundary.  This is for TI
+     TMS320C54X only.  */
+#define SEC_TIC54X_BLOCK 0x40000000
+
+  /* Conditionally link this section; do not link if there are no
+     references found to any symbol in the section.  This is for TI
+     TMS320C54X only.  */
+#define SEC_TIC54X_CLINK 0x80000000
 
   /*  End of section flags.  */