1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 2209620..659c1bb 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -7,6 +7,9 @@
*
* Copyright (C) 2001 Russell King.
*
+ * 2005/09/16: Enabled higher baud rates for 16C95x.
+ * (Mathias Adam <a2@adamis.de>)
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -2227,6 +2230,14 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
baud == (port->uartclk/8))
quot = 0x8002;
+ /*
+ * For 16C950s UART_TCR is used in combination with divisor==1
+ * to achieve baud rates up to baud_base*4.
+ */
+ else if ((port->type == PORT_16C950) &&
+ baud > (port->uartclk/16))
+ quot = 1;
+
else
quot = uart_get_divisor(port, baud);
@@ -2240,7 +2251,7 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned char cval, fcr = 0;
unsigned long flags;
- unsigned int baud, quot;
+ unsigned int baud, quot, max_baud;
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -2272,9 +2283,10 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
+ max_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 : port->uartclk/16);
baud = uart_get_baud_rate(port, termios, old,
port->uartclk / 16 / 0xffff,
- port->uartclk / 16);
+ max_baud);
quot = serial8250_get_divisor(port, baud);
/*
@@ -2311,6 +2323,19 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
spin_lock_irqsave(&up->port.lock, flags);
/*
+ * 16C950 supports additional prescaler ratios between 1:16 and 1:4
+ * thus increasing max baud rate to uartclk/4.
+ */
+ if (up->port.type == PORT_16C950) {
+ if (baud == port->uartclk/4)
+ serial_icr_write(up, UART_TCR, 0x4);
+ else if (baud == port->uartclk/8)
+ serial_icr_write(up, UART_TCR, 0x8);
+ else
+ serial_icr_write(up, UART_TCR, 0);
+ }
+
+ /*
* Update the per-port timeout.
*/
uart_update_timeout(port, termios->c_cflag, baud);
|
