diff options
Diffstat (limited to 'freed-ora/current/f24/antenna_select.patch')
| -rw-r--r-- | freed-ora/current/f24/antenna_select.patch | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/freed-ora/current/f24/antenna_select.patch b/freed-ora/current/f24/antenna_select.patch new file mode 100644 index 000000000..15763e9bc --- /dev/null +++ b/freed-ora/current/f24/antenna_select.patch @@ -0,0 +1,227 @@ +From c18d8f5095715c56bb3cd9cba64242542632054b Mon Sep 17 00:00:00 2001 +From: Larry Finger <Larry.Finger@lwfinger.net> +Date: Wed, 16 Mar 2016 13:33:34 -0500 +Subject: rtlwifi: rtl8723be: Add antenna select module parameter + +A number of new laptops have been delivered with only a single antenna. +In principle, this is OK; however, a problem arises when the on-board +EEPROM is programmed to use the other antenna connection. The option +of opening the computer and moving the connector is not always possible +as it will void the warranty in some cases. In addition, this solution +breaks the Windows driver when the box dual boots Linux and Windows. + +A fix involving a new module parameter has been developed. This commit +adds the new parameter and implements the changes needed for the driver. + +Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> +Cc: Stable <stable@vger.kernel.org> [V4.0+] +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 5 +++++ + drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c | 3 +++ + drivers/net/wireless/realtek/rtlwifi/wifi.h | 3 +++ + 3 files changed, 11 insertions(+) + +diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c +index c983d2f..5a3df91 100644 +--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c ++++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c +@@ -2684,6 +2684,7 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw, + bool auto_load_fail, u8 *hwinfo) + { + struct rtl_priv *rtlpriv = rtl_priv(hw); ++ struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params; + u8 value; + u32 tmpu_32; + +@@ -2702,6 +2703,10 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw, + rtlpriv->btcoexist.btc_info.ant_num = ANT_X2; + } + ++ /* override ant_num / ant_path */ ++ if (mod_params->ant_sel) ++ rtlpriv->btcoexist.btc_info.ant_num = ++ (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1); + } + + void rtl8723be_bt_reg_init(struct ieee80211_hw *hw) +diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c +index a78eaed..2101793 100644 +--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c ++++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c +@@ -273,6 +273,7 @@ static struct rtl_mod_params rtl8723be_mod_params = { + .msi_support = false, + .disable_watchdog = false, + .debug = DBG_EMERG, ++ .ant_sel = 0, + }; + + static struct rtl_hal_cfg rtl8723be_hal_cfg = { +@@ -394,6 +395,7 @@ module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444); + module_param_named(msi, rtl8723be_mod_params.msi_support, bool, 0444); + module_param_named(disable_watchdog, rtl8723be_mod_params.disable_watchdog, + bool, 0444); ++module_param_named(ant_sel, rtl8723be_mod_params.ant_sel, int, 0444); + MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n"); + MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n"); + MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n"); +@@ -402,6 +404,7 @@ MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n"); + MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)"); + MODULE_PARM_DESC(disable_watchdog, + "Set to 1 to disable the watchdog (default 0)\n"); ++MODULE_PARM_DESC(ant_sel, "Set to 1 or 2 to force antenna number (default 0)\n"); + + static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume); + +diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h +index 554d814..93bd7fc 100644 +--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h ++++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h +@@ -2246,6 +2246,9 @@ struct rtl_mod_params { + + /* default 0: 1 means do not disable interrupts */ + bool int_clear; ++ ++ /* select antenna */ ++ int ant_sel; + }; + + struct rtl_hal_usbint_cfg { +-- +cgit v0.12 + +From baa1702290953295e421f0f433e2b1ff4815827c Mon Sep 17 00:00:00 2001 +From: Larry Finger <Larry.Finger@lwfinger.net> +Date: Wed, 16 Mar 2016 13:33:35 -0500 +Subject: rtlwifi: btcoexist: Implement antenna selection + +The previous patch added an option to rtl8723be to manually select the +antenna for those cases when only a single antenna is present, and the +on-board EEPROM is incorrectly programmed. This patch implements the +necessary changes in the Bluetooth coexistence driver. + +Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> +Cc: Stable <stable@vger.kernel.org> [V4.0+] +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + .../realtek/rtlwifi/btcoexist/halbtc8723b2ant.c | 9 ++++++-- + .../realtek/rtlwifi/btcoexist/halbtcoutsrc.c | 27 +++++++++++++++++++++- + .../realtek/rtlwifi/btcoexist/halbtcoutsrc.h | 2 +- + .../wireless/realtek/rtlwifi/btcoexist/rtl_btc.c | 5 +++- + 4 files changed, 38 insertions(+), 5 deletions(-) + +diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c +index c43ab59..77cbd10 100644 +--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c ++++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c +@@ -1203,7 +1203,6 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist, + + /* Force GNT_BT to low */ + btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0); +- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); + + if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) { + /* tell firmware "no antenna inverse" */ +@@ -1211,19 +1210,25 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist, + h2c_parameter[1] = 1; /* ext switch type */ + btcoexist->btc_fill_h2c(btcoexist, 0x65, 2, + h2c_parameter); ++ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); + } else { + /* tell firmware "antenna inverse" */ + h2c_parameter[0] = 1; + h2c_parameter[1] = 1; /* ext switch type */ + btcoexist->btc_fill_h2c(btcoexist, 0x65, 2, + h2c_parameter); ++ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280); + } + } + + /* ext switch setting */ + if (use_ext_switch) { + /* fixed internal switch S1->WiFi, S0->BT */ +- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); ++ if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) ++ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); ++ else ++ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280); ++ + switch (antpos_type) { + case BTC_ANT_WIFI_AT_MAIN: + /* ext switch main at wifi */ +diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c +index b2791c8..babd149 100644 +--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c ++++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c +@@ -965,13 +965,38 @@ void exhalbtc_set_chip_type(u8 chip_type) + } + } + +-void exhalbtc_set_ant_num(u8 type, u8 ant_num) ++void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num) + { + if (BT_COEX_ANT_TYPE_PG == type) { + gl_bt_coexist.board_info.pg_ant_num = ant_num; + gl_bt_coexist.board_info.btdm_ant_num = ant_num; ++ /* The antenna position: ++ * Main (default) or Aux for pgAntNum=2 && btdmAntNum =1. ++ * The antenna position should be determined by ++ * auto-detect mechanism. ++ * The following is assumed to main, ++ * and those must be modified ++ * if y auto-detect mechanism is ready ++ */ ++ if ((gl_bt_coexist.board_info.pg_ant_num == 2) && ++ (gl_bt_coexist.board_info.btdm_ant_num == 1)) ++ gl_bt_coexist.board_info.btdm_ant_pos = ++ BTC_ANTENNA_AT_MAIN_PORT; ++ else ++ gl_bt_coexist.board_info.btdm_ant_pos = ++ BTC_ANTENNA_AT_MAIN_PORT; + } else if (BT_COEX_ANT_TYPE_ANTDIV == type) { + gl_bt_coexist.board_info.btdm_ant_num = ant_num; ++ gl_bt_coexist.board_info.btdm_ant_pos = ++ BTC_ANTENNA_AT_MAIN_PORT; ++ } else if (type == BT_COEX_ANT_TYPE_DETECTED) { ++ gl_bt_coexist.board_info.btdm_ant_num = ant_num; ++ if (rtlpriv->cfg->mod_params->ant_sel == 1) ++ gl_bt_coexist.board_info.btdm_ant_pos = ++ BTC_ANTENNA_AT_AUX_PORT; ++ else ++ gl_bt_coexist.board_info.btdm_ant_pos = ++ BTC_ANTENNA_AT_MAIN_PORT; + } + } + +diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h +index 0a903ea..f41ca57 100644 +--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h ++++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h +@@ -535,7 +535,7 @@ void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version); + void exhalbtc_update_min_bt_rssi(char bt_rssi); + void exhalbtc_set_bt_exist(bool bt_exist); + void exhalbtc_set_chip_type(u8 chip_type); +-void exhalbtc_set_ant_num(u8 type, u8 ant_num); ++void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num); + void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist); + void exhalbtc_signal_compensation(struct btc_coexist *btcoexist, + u8 *rssi_wifi, u8 *rssi_bt); +diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c +index b9b0cb7..d3fd921 100644 +--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c ++++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c +@@ -72,7 +72,10 @@ void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv) + __func__, bt_type); + exhalbtc_set_chip_type(bt_type); + +- exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num); ++ if (rtlpriv->cfg->mod_params->ant_sel == 1) ++ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_DETECTED, 1); ++ else ++ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_PG, ant_num); + } + + void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv) +-- +cgit v0.12 + |
