diff options
Diffstat (limited to 'freed-ora/current/F-12/linux-2.6-v4l-dvb-add-lgdt3304-support.patch')
-rw-r--r-- | freed-ora/current/F-12/linux-2.6-v4l-dvb-add-lgdt3304-support.patch | 350 |
1 files changed, 350 insertions, 0 deletions
diff --git a/freed-ora/current/F-12/linux-2.6-v4l-dvb-add-lgdt3304-support.patch b/freed-ora/current/F-12/linux-2.6-v4l-dvb-add-lgdt3304-support.patch new file mode 100644 index 000000000..30c50434f --- /dev/null +++ b/freed-ora/current/F-12/linux-2.6-v4l-dvb-add-lgdt3304-support.patch @@ -0,0 +1,350 @@ +From b71e18093e2e7f240797875c50c49552722f8825 Mon Sep 17 00:00:00 2001 +From: Jarod Wilson <jarod@redhat.com> +Date: Mon, 15 Feb 2010 17:13:25 -0500 +Subject: [PATCH 1/2] dvb: add lgdt3304 support to lgdt3305 driver + +There's a currently-unused lgdt3304 demod driver, which leaves a lot to +be desired as far as functionality. The 3304 is unsurprisingly quite +similar to the 3305, and empirical testing yeilds far better results +and more complete functionality by merging 3304 support into the 3305 +driver. (For example, the current lgdt3304 driver lacks support for +signal strength, snr, ucblocks, etc., which we get w/the lgdt3305). + +For the moment, not dropping the lgdt3304 driver, and its still up to +a given device's config setup to choose which demod driver to use, but +I'd suggest dropping the 3304 driver entirely. + +As a follow-up to this patch, I've got another patch that adds support +for the KWorld PlusTV 340U (ATSC) em2870-based tuner stick, driving +its lgdt3304 demod via this lgdt3305 driver, which is what I used to +successfully test this patch with both VSB_8 and QAM_256 signals. + +A few pieces are still a touch crude, but I think its a solid start, +as well as much cleaner and more feature-complete than the existing +lgdt3304 driver. + +Signed-off-by: Jarod Wilson <jarod@redhat.com> +--- + drivers/media/dvb/frontends/lgdt3305.c | 206 ++++++++++++++++++++++++++++++-- + drivers/media/dvb/frontends/lgdt3305.h | 6 + + 2 files changed, 203 insertions(+), 9 deletions(-) + +diff --git a/drivers/media/dvb/frontends/lgdt3305.c b/drivers/media/dvb/frontends/lgdt3305.c +index fde8c59..40695e6 100644 +--- a/drivers/media/dvb/frontends/lgdt3305.c ++++ b/drivers/media/dvb/frontends/lgdt3305.c +@@ -1,5 +1,5 @@ + /* +- * Support for LGDT3305 - VSB/QAM ++ * Support for LG Electronics LGDT3304 and LGDT3305 - VSB/QAM + * + * Copyright (C) 2008, 2009 Michael Krufky <mkrufky@linuxtv.org> + * +@@ -357,7 +357,10 @@ static int lgdt3305_rfagc_loop(struct lgdt3305_state *state, + case QAM_256: + agcdelay = 0x046b; + rfbw = 0x8889; +- ifbw = 0x8888; ++ if (state->cfg->demod_chip == LGDT3305) ++ ifbw = 0x8888; ++ else ++ ifbw = 0x6666; + break; + default: + return -EINVAL; +@@ -409,8 +412,18 @@ static int lgdt3305_agc_setup(struct lgdt3305_state *state, + lg_dbg("lockdten = %d, acqen = %d\n", lockdten, acqen); + + /* control agc function */ +- lgdt3305_write_reg(state, LGDT3305_AGC_CTRL_4, 0xe1 | lockdten << 1); +- lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 2, acqen); ++ switch (state->cfg->demod_chip) { ++ case LGDT3304: ++ lgdt3305_write_reg(state, 0x0314, 0xe1 | lockdten << 1); ++ lgdt3305_set_reg_bit(state, 0x030e, 2, acqen); ++ break; ++ case LGDT3305: ++ lgdt3305_write_reg(state, LGDT3305_AGC_CTRL_4, 0xe1 | lockdten << 1); ++ lgdt3305_set_reg_bit(state, LGDT3305_AGC_CTRL_1, 2, acqen); ++ break; ++ default: ++ return -EINVAL; ++ } + + return lgdt3305_rfagc_loop(state, param); + } +@@ -543,6 +556,11 @@ static int lgdt3305_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) + enable ? 0 : 1); + } + ++static int lgdt3304_sleep(struct dvb_frontend *fe) ++{ ++ return 0; ++} ++ + static int lgdt3305_sleep(struct dvb_frontend *fe) + { + struct lgdt3305_state *state = fe->demodulator_priv; +@@ -571,6 +589,55 @@ static int lgdt3305_sleep(struct dvb_frontend *fe) + return 0; + } + ++static int lgdt3304_init(struct dvb_frontend *fe) ++{ ++ struct lgdt3305_state *state = fe->demodulator_priv; ++ int ret; ++ ++ static struct lgdt3305_reg lgdt3304_init_data[] = { ++ { .reg = LGDT3305_GEN_CTRL_1, .val = 0x03, }, ++ { .reg = 0x000d, .val = 0x02, }, ++ { .reg = 0x000e, .val = 0x02, }, ++ { .reg = LGDT3305_DGTL_AGC_REF_1, .val = 0x32, }, ++ { .reg = LGDT3305_DGTL_AGC_REF_2, .val = 0xc4, }, ++ { .reg = LGDT3305_CR_CTR_FREQ_1, .val = 0x00, }, ++ { .reg = LGDT3305_CR_CTR_FREQ_2, .val = 0x00, }, ++ { .reg = LGDT3305_CR_CTR_FREQ_3, .val = 0x00, }, ++ { .reg = LGDT3305_CR_CTR_FREQ_4, .val = 0x00, }, ++ { .reg = LGDT3305_CR_CTRL_7, .val = 0xf9, }, ++ { .reg = 0x0112, .val = 0x17, }, ++ { .reg = 0x0113, .val = 0x15, }, ++ { .reg = 0x0114, .val = 0x18, }, ++ { .reg = 0x0115, .val = 0xff, }, ++ { .reg = 0x0116, .val = 0x3c, }, ++ { .reg = 0x0214, .val = 0x67, }, ++ { .reg = 0x0424, .val = 0x8d, }, ++ { .reg = 0x0427, .val = 0x12, }, ++ { .reg = 0x0428, .val = 0x4f, }, ++ { .reg = LGDT3305_IFBW_1, .val = 0x80, }, ++ { .reg = LGDT3305_IFBW_2, .val = 0x00, }, ++ { .reg = 0x030a, .val = 0x08, }, ++ { .reg = 0x030b, .val = 0x9b, }, ++ { .reg = 0x030d, .val = 0x00, }, ++ { .reg = 0x030e, .val = 0x1c, }, ++ { .reg = 0x0314, .val = 0xe1, }, ++ { .reg = 0x000d, .val = 0x82, }, ++ { .reg = LGDT3305_TP_CTRL_1, .val = 0x5b, }, ++ { .reg = LGDT3305_TP_CTRL_1, .val = 0x5b, }, ++ }; ++ ++ lg_dbg("\n"); ++ ++ ret = lgdt3305_write_regs(state, lgdt3304_init_data, ++ ARRAY_SIZE(lgdt3304_init_data)); ++ if (lg_fail(ret)) ++ goto fail; ++ ++ ret = lgdt3305_soft_reset(state); ++fail: ++ return ret; ++} ++ + static int lgdt3305_init(struct dvb_frontend *fe) + { + struct lgdt3305_state *state = fe->demodulator_priv; +@@ -639,6 +706,88 @@ fail: + return ret; + } + ++static int lgdt3304_set_parameters(struct dvb_frontend *fe, ++ struct dvb_frontend_parameters *param) ++{ ++ struct lgdt3305_state *state = fe->demodulator_priv; ++ int ret; ++ ++ lg_dbg("(%d, %d)\n", param->frequency, param->u.vsb.modulation); ++ ++ if (fe->ops.tuner_ops.set_params) { ++ ret = fe->ops.tuner_ops.set_params(fe, param); ++ if (fe->ops.i2c_gate_ctrl) ++ fe->ops.i2c_gate_ctrl(fe, 0); ++ if (lg_fail(ret)) ++ goto fail; ++ state->current_frequency = param->frequency; ++ } ++ ++ ret = lgdt3305_set_modulation(state, param); ++ if (lg_fail(ret)) ++ goto fail; ++ ++ ret = lgdt3305_passband_digital_agc(state, param); ++ if (lg_fail(ret)) ++ goto fail; ++ ++ ret = lgdt3305_agc_setup(state, param); ++ if (lg_fail(ret)) ++ goto fail; ++ ++ /* reg 0x030d is 3304-only... seen in vsb and qam usbsnoops... */ ++ switch (param->u.vsb.modulation) { ++ case VSB_8: ++ lgdt3305_write_reg(state, 0x030d, 0x00); ++#if 1 ++ lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_1, 0x4f); ++ lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_2, 0x0c); ++ lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_3, 0xac); ++ lgdt3305_write_reg(state, LGDT3305_CR_CTR_FREQ_4, 0xba); ++#endif ++ break; ++ case QAM_64: ++ case QAM_256: ++ lgdt3305_write_reg(state, 0x030d, 0x14); ++#if 1 ++ ret = lgdt3305_set_if(state, param); ++ if (lg_fail(ret)) ++ goto fail; ++#endif ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++#if 0 ++ /* the set_if vsb formula doesn't work for the 3304, we end up sending ++ * 0x40851e07 instead of 0x4f0cacba (which works back to 94050, rather ++ * than 3250, in the case of the kworld 340u) */ ++ ret = lgdt3305_set_if(state, param); ++ if (lg_fail(ret)) ++ goto fail; ++#endif ++ ++ ret = lgdt3305_spectral_inversion(state, param, ++ state->cfg->spectral_inversion ++ ? 1 : 0); ++ if (lg_fail(ret)) ++ goto fail; ++ ++ state->current_modulation = param->u.vsb.modulation; ++ ++ ret = lgdt3305_mpeg_mode(state, state->cfg->mpeg_mode); ++ if (lg_fail(ret)) ++ goto fail; ++ ++ /* lgdt3305_mpeg_mode_polarity calls lgdt3305_soft_reset */ ++ ret = lgdt3305_mpeg_mode_polarity(state, ++ state->cfg->tpclk_edge, ++ state->cfg->tpvalid_polarity); ++fail: ++ return ret; ++} ++ + static int lgdt3305_set_parameters(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) + { +@@ -847,6 +996,10 @@ static int lgdt3305_read_status(struct dvb_frontend *fe, fe_status_t *status) + switch (state->current_modulation) { + case QAM_256: + case QAM_64: ++#if 0 /* needed w/3304 to set FE_HAS_SIGNAL */ ++ if (cr_lock) ++ *status |= FE_HAS_SIGNAL; ++#endif + ret = lgdt3305_read_fec_lock_status(state, &fec_lock); + if (lg_fail(ret)) + goto fail; +@@ -992,6 +1145,7 @@ static void lgdt3305_release(struct dvb_frontend *fe) + kfree(state); + } + ++static struct dvb_frontend_ops lgdt3304_ops; + static struct dvb_frontend_ops lgdt3305_ops; + + struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config, +@@ -1012,11 +1166,21 @@ struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config, + state->cfg = config; + state->i2c_adap = i2c_adap; + +- memcpy(&state->frontend.ops, &lgdt3305_ops, +- sizeof(struct dvb_frontend_ops)); ++ switch (config->demod_chip) { ++ case LGDT3304: ++ memcpy(&state->frontend.ops, &lgdt3304_ops, ++ sizeof(struct dvb_frontend_ops)); ++ break; ++ case LGDT3305: ++ memcpy(&state->frontend.ops, &lgdt3305_ops, ++ sizeof(struct dvb_frontend_ops)); ++ break; ++ default: ++ goto fail; ++ } + state->frontend.demodulator_priv = state; + +- /* verify that we're talking to a lg dt3305 */ ++ /* verify that we're talking to a lg dt3304/5 */ + ret = lgdt3305_read_reg(state, LGDT3305_GEN_CTRL_2, &val); + if ((lg_fail(ret)) | (val == 0)) + goto fail; +@@ -1035,12 +1199,36 @@ struct dvb_frontend *lgdt3305_attach(const struct lgdt3305_config *config, + + return &state->frontend; + fail: +- lg_warn("unable to detect LGDT3305 hardware\n"); ++ lg_warn("unable to detect %s hardware\n", ++ config->demod_chip ? "LGDT3304" : "LGDT3305"); + kfree(state); + return NULL; + } + EXPORT_SYMBOL(lgdt3305_attach); + ++static struct dvb_frontend_ops lgdt3304_ops = { ++ .info = { ++ .name = "LG Electronics LGDT3304 VSB/QAM Frontend", ++ .type = FE_ATSC, ++ .frequency_min = 54000000, ++ .frequency_max = 858000000, ++ .frequency_stepsize = 62500, ++ .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB ++ }, ++ .i2c_gate_ctrl = lgdt3305_i2c_gate_ctrl, ++ .init = lgdt3304_init, ++ .sleep = lgdt3304_sleep, ++ .set_frontend = lgdt3304_set_parameters, ++ .get_frontend = lgdt3305_get_frontend, ++ .get_tune_settings = lgdt3305_get_tune_settings, ++ .read_status = lgdt3305_read_status, ++ .read_ber = lgdt3305_read_ber, ++ .read_signal_strength = lgdt3305_read_signal_strength, ++ .read_snr = lgdt3305_read_snr, ++ .read_ucblocks = lgdt3305_read_ucblocks, ++ .release = lgdt3305_release, ++}; ++ + static struct dvb_frontend_ops lgdt3305_ops = { + .info = { + .name = "LG Electronics LGDT3305 VSB/QAM Frontend", +@@ -1064,7 +1252,7 @@ static struct dvb_frontend_ops lgdt3305_ops = { + .release = lgdt3305_release, + }; + +-MODULE_DESCRIPTION("LG Electronics LGDT3305 ATSC/QAM-B Demodulator Driver"); ++MODULE_DESCRIPTION("LG Electronics LGDT3304/5 ATSC/QAM-B Demodulator Driver"); + MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); + MODULE_LICENSE("GPL"); + MODULE_VERSION("0.1"); +diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h +index 9cb11c9..a7f30c2 100644 +--- a/drivers/media/dvb/frontends/lgdt3305.h ++++ b/drivers/media/dvb/frontends/lgdt3305.h +@@ -41,6 +41,11 @@ enum lgdt3305_tp_valid_polarity { + LGDT3305_TP_VALID_HIGH = 1, + }; + ++enum lgdt_demod_chip_type { ++ LGDT3305 = 0, ++ LGDT3304 = 1, ++}; ++ + struct lgdt3305_config { + u8 i2c_addr; + +@@ -65,6 +70,7 @@ struct lgdt3305_config { + enum lgdt3305_mpeg_mode mpeg_mode; + enum lgdt3305_tp_clock_edge tpclk_edge; + enum lgdt3305_tp_valid_polarity tpvalid_polarity; ++ enum lgdt_demod_chip_type demod_chip; + }; + + #if defined(CONFIG_DVB_LGDT3305) || (defined(CONFIG_DVB_LGDT3305_MODULE) && \ +-- +1.6.6 + |