diff options
Diffstat (limited to 'support/kconfig/Makefile')
| -rw-r--r-- | support/kconfig/Makefile | 220 |
1 files changed, 121 insertions, 99 deletions
diff --git a/support/kconfig/Makefile b/support/kconfig/Makefile index af62023863..b0bcc2627a 100644 --- a/support/kconfig/Makefile +++ b/support/kconfig/Makefile @@ -1,60 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 # =========================================================================== # Kernel configuration targets # These targets are used from top-level makefile -PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ +PHONY += xconfig gconfig menuconfig config syncconfig update-po-config \ localmodconfig localyesconfig +# Easy method for doing a status message + kecho := : + quiet_kecho := echo +silent_kecho := : +kecho := $($(quiet)kecho) + ifdef KBUILD_KCONFIG Kconfig := $(KBUILD_KCONFIG) else Kconfig := Kconfig endif +ifeq ($(quiet),silent_) +silent := -s +endif + # We need this, in case the user has it in its environment unexport CONFIG_ xconfig: $(obj)/qconf - $< $(Kconfig) + $< $(silent) $(Kconfig) gconfig: $(obj)/gconf - $< $(Kconfig) + $< $(silent) $(Kconfig) menuconfig: $(obj)/mconf - $< $(Kconfig) + $< $(silent) $(Kconfig) config: $(obj)/conf - $< --oldaskconfig $(Kconfig) + $< $(silent) --oldaskconfig $(Kconfig) nconfig: $(obj)/nconf - $< $(Kconfig) + $< $(silent) $(Kconfig) -oldconfig: $(obj)/conf - $< --$@ $(Kconfig) +# This has become an internal implementation detail and is now deprecated +# for external use. +syncconfig: $(obj)/conf + $(Q)mkdir -p include/config include/generated + $< $(silent) --$@ $(Kconfig) -silentoldconfig: $(obj)/conf - $(Q)mkdir -p include/generated - $< --$@ $(Kconfig) - -localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)mkdir -p include/generated - $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config +localyesconfig localmodconfig: $(obj)/conf + $(Q)mkdir -p include/config include/generated + $(Q)perl $(srctree)/$(src)/streamline_config.pl --$@ $(srctree) $(Kconfig) > .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \ mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ + $< $(silent) --oldconfig $(Kconfig); \ mv -f .config.old.1 .config.old) \ else \ mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ + $< $(silent) --oldconfig $(Kconfig); \ fi $(Q)rm -f .tmp.config # Create new linux.pot file # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h - $(Q)echo " GEN config.pot" + $(Q)$(kecho) " GEN config.pot" $(Q)xgettext --default-domain=linux \ --add-comments --keyword=_ --keyword=N_ \ --from-code=UTF-8 \ @@ -65,56 +75,96 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \ $(srctree)/arch/*/um/Kconfig`; \ do \ - echo " GEN $$i"; \ + $(kecho) " GEN $$i"; \ $(obj)/kxgettext $$i \ >> $(obj)/config.pot; \ done ) - $(Q)echo " GEN linux.pot" + $(Q)$(kecho) " GEN linux.pot" $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ --output $(obj)/linux.pot $(Q)rm -f $(obj)/config.pot -PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig - -allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf - $< --$@ $(Kconfig) +# These targets map 1:1 to the commandline options of 'conf' +simple-targets := oldconfig allnoconfig allyesconfig allmodconfig \ + alldefconfig randconfig listnewconfig olddefconfig +PHONY += $(simple-targets) -PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig +$(simple-targets): $(obj)/conf + $< $(silent) --$@ $(Kconfig) -listnewconfig olddefconfig: $(obj)/conf - $< --$@ $(Kconfig) +PHONY += oldnoconfig silentoldconfig savedefconfig defconfig # oldnoconfig is an alias of olddefconfig, because people already are dependent -# on its behavior(sets new symbols to their default value but not 'n') with the +# on its behavior (sets new symbols to their default value but not 'n') with the # counter-intuitive name. -oldnoconfig: $(obj)/conf - $< --olddefconfig $(Kconfig) +oldnoconfig: olddefconfig + @echo " WARNING: \"oldnoconfig\" target will be removed after Linux 4.19" + @echo " Please use \"olddefconfig\" instead, which is an alias." + +# We do not expect manual invokcation of "silentoldcofig" (or "syncconfig"). +silentoldconfig: syncconfig + @echo " WARNING: \"silentoldconfig\" has been renamed to \"syncconfig\"" + @echo " and is now an internal implementation detail." + @echo " What you want is probably \"oldconfig\"." + @echo " \"silentoldconfig\" will be removed after Linux 4.19" savedefconfig: $(obj)/conf - $< --$@=defconfig $(Kconfig) + $< $(silent) --$@=defconfig $(Kconfig) defconfig: $(obj)/conf ifeq ($(KBUILD_DEFCONFIG),) - $< --defconfig $(Kconfig) + $< $(silent) --defconfig $(Kconfig) else - @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)),) + @$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" + $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) +else + @$(kecho) "*** Default configuration is based on target '$(KBUILD_DEFCONFIG)'" + $(Q)$(MAKE) -f $(srctree)/Makefile $(KBUILD_DEFCONFIG) +endif endif %_defconfig: $(obj)/conf - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) + $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) + +configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@) + +%.config: $(obj)/conf + $(if $(call configfiles),, $(error No configuration exists for this target on this architecture)) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(configfiles) + +$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig + +PHONY += kvmconfig +kvmconfig: kvm_guest.config + @: + +PHONY += xenconfig +xenconfig: xen.config + @: + +PHONY += tinyconfig +tinyconfig: + $(Q)$(MAKE) -f $(srctree)/Makefile allnoconfig tiny.config + +# CHECK: -o cache_dir=<path> working? +PHONY += testconfig +testconfig: $(obj)/conf + $(PYTHON3) -B -m pytest $(srctree)/$(src)/tests \ + -o cache_dir=$(abspath $(obj)/tests/.cache) \ + $(if $(findstring 1,$(KBUILD_VERBOSE)),--capture=no) +clean-dirs += tests/.cache # Help text used by make help help: @echo ' config - Update current config utilising a line-oriented program' - @echo ' nconfig - Update current config utilising a ncurses menu based program' + @echo ' nconfig - Update current config utilising a ncurses menu based' + @echo ' program' @echo ' menuconfig - Update current config utilising a menu based program' - @echo ' xconfig - Update current config utilising a QT based front-end' - @echo ' gconfig - Update current config utilising a GTK based front-end' + @echo ' xconfig - Update current config utilising a Qt based front-end' + @echo ' gconfig - Update current config utilising a GTK+ based front-end' @echo ' oldconfig - Update current config utilising a provided .config as base' @echo ' localmodconfig - Update current config disabling modules not loaded' @echo ' localyesconfig - Update current config converting local mods to core' - @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps' @echo ' defconfig - New config with default from ARCH supplied defconfig' @echo ' savedefconfig - Save current config as ./defconfig (minimal config)' @echo ' allnoconfig - New config where all options are answered with no' @@ -123,7 +173,11 @@ help: @echo ' alldefconfig - New config with all symbols set to default' @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' - @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' + @echo ' olddefconfig - Same as oldconfig but sets new symbols to their' + @echo ' default value without prompting' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' + @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh @@ -141,9 +195,9 @@ HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ # mconf: Used for the menuconfig target # Utilizes the lxdialog package # qconf: Used for the xconfig target -# Based on QT which needs to be installed to compile it +# Based on Qt which needs to be installed to compile it # gconf: Used for the gconfig target -# Based on GTK which needs to be installed to compile it +# Based on GTK+ which needs to be installed to compile it # object files used by all kconfig flavours lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o @@ -174,11 +228,11 @@ endif ifeq ($(MAKECMDGOALS),qconf) qconf-target := 1 endif + ifeq ($(MAKECMDGOALS),gconf) gconf-target := 1 endif - ifeq ($(qconf-target),1) hostprogs-y += qconf endif @@ -187,14 +241,14 @@ ifeq ($(gconf-target),1) hostprogs-y += gconf endif +targets += zconf.lex.c clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck -clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf nconf +clean-files += gconf.glade.h clean-files += config.pot linux.pot # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) PHONY += $(obj)/dochecklxdialog -$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog +$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/dochecklxdialog $(obj)/dochecklxdialog: $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) @@ -202,14 +256,12 @@ always := dochecklxdialog # Add environment specific flags HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS)) +HOST_EXTRACXXFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCXX) $(HOSTCXXFLAGS)) # generated files seem to need this to find local include files HOSTCFLAGS_zconf.lex.o := -I$(src) HOSTCFLAGS_zconf.tab.o := -I$(src) -LEX_PREFIX_zconf := zconf -YACC_PREFIX_zconf := zconf - HOSTLOADLIBES_qconf = $(KC_QT_LIBS) HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) @@ -225,67 +277,38 @@ HOSTLOADLIBES_nconf = $(shell \ || echo "-lmenu -lpanel -lncurses" ) $(obj)/qconf.o: $(obj)/.tmp_qtcheck -ifeq ($(qconf-target),1) +ifeq ($(MAKECMDGOALS),qconf) $(obj)/.tmp_qtcheck: $(src)/Makefile -include $(obj)/.tmp_qtcheck -# QT needs some extra effort... +# Qt needs some extra effort... $(obj)/.tmp_qtcheck: - @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - if ! pkg-config --exists QtCore 2> /dev/null; then \ - echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ - else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo >&2 "*"; \ - echo >&2 "* Unable to find any QT installation. Please make sure that"; \ - echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \ - echo >&2 "* either qmake can be found or install pkg-config or set"; \ - echo >&2 "* the QTDIR environment variable to the correct location."; \ - echo >&2 "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ - fi; \ + @set -e; $(kecho) " CHECK qt"; \ + if pkg-config --exists Qt5Core; then \ + cflags="-std=c++11 -fPIC `pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets`"; \ + libs=`pkg-config --libs Qt5Core Qt5Gui Qt5Widgets`; \ + moc=`pkg-config --variable=host_bins Qt5Core`/moc; \ + elif pkg-config --exists QtCore; then \ + cflags=`pkg-config --cflags QtCore QtGui`; \ + libs=`pkg-config --libs QtCore QtGui`; \ + moc=`pkg-config --variable=moc_location QtCore`; \ else \ - cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ - libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ - moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \ - [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \ + echo >&2 "*"; \ + echo >&2 "* Could not find Qt via pkg-config."; \ + echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH"; \ + echo >&2 "*"; \ + exit 1; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ echo "KC_QT_MOC=$$moc" >> $@ endif +ifeq ($(MAKECMDGOALS),gconf) $(obj)/gconf.o: $(obj)/.tmp_gtkcheck - -ifeq ($(gconf-target),1) -include $(obj)/.tmp_gtkcheck -# GTK needs some extra effort, too... +# GTK+ needs some extra effort, too... $(obj)/.tmp_gtkcheck: @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \ if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \ @@ -306,15 +329,14 @@ $(obj)/.tmp_gtkcheck: fi endif -$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c +$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/qconf.o: $(obj)/qconf.moc $(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck $(KC_QT_MOC) -i $< -o $@ -# Extract gconf menu items for I18N support +# Extract gconf menu items for i18n support $(obj)/gconf.glade.h: $(obj)/gconf.glade $(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \ $(obj)/gconf.glade - |
