5 files changed, 0 insertions, 91 deletions
diff --git a/board/firefly/firefly-rk3288/extlinux.conf b/board/firefly/firefly-rk3288/extlinux.conf
deleted file mode 100644
index 39ac5b9dac..0000000000
--- a/board/firefly/firefly-rk3288/extlinux.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-default firefly-rk3288
-
-label firefly-rk3288
-kernel /boot/uImage
-devicetree /boot/rk3288-firefly.dtb
-append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
diff --git a/board/firefly/firefly-rk3288/post-build.sh b/board/firefly/firefly-rk3288/post-build.sh
deleted file mode 100755
index 94e89ce6a4..0000000000
--- a/board/firefly/firefly-rk3288/post-build.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/firefly/firefly-rk3288/post-image.sh b/board/firefly/firefly-rk3288/post-image.sh
deleted file mode 100755
index d89bc7e550..0000000000
--- a/board/firefly/firefly-rk3288/post-image.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/sd-image.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage							\
-	--rootpath "${TARGET_DIR}"		\
-	--tmppath "${GENIMAGE_TMP}"		\
-	--inputpath "${BINARIES_DIR}"	\
-	--outputpath "${BINARIES_DIR}"	\
-	--config "${GENIMAGE_CFG}"
-
-exit $?
diff --git a/board/firefly/firefly-rk3288/readme.txt b/board/firefly/firefly-rk3288/readme.txt
deleted file mode 100644
index d6210857f1..0000000000
--- a/board/firefly/firefly-rk3288/readme.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Firefly RK3288
-
-How to build it
-===============
-
-  $ make firefly_rk3288_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build rootfs image:
-
-  $ make
-
-Result of the build
--------------------
-
-After building, you should get a tree like this:
-
-  output/images/
-  ├── rk3288-firefly.dtb
-  ├── rootfs.ext2
-  ├── rootfs.ext4 -> rootfs.ext2
-  ├── sdcard.img
-  ├── u-boot-dtb.img
-  ├── u-boot-spl-dtb.bin
-  ├── u-boot-spl-dtb.img
-  └── uImage
-
-Prepare your SDCard
-===================
-
-Buildroot generates a ready-to-use SD card image that you can flash directly to
-the card. The image will be in output/images/sdcard.img.
-You can write this image directly to an SD card device (i.e. /dev/xxx):
-
-  $ dd if=output/images/sdcard.img of=/dev/xxx
-
-Finally, you can insert the SD card to the Firefly RK3288 board and boot it.
diff --git a/board/firefly/firefly-rk3288/sd-image.cfg b/board/firefly/firefly-rk3288/sd-image.cfg
deleted file mode 100644
index a9eb9f0142..0000000000
--- a/board/firefly/firefly-rk3288/sd-image.cfg
+++ /dev/null
@@ -1,22 +0,0 @@
-image sdcard.img {
-  hdimage {
-  }
-
-  partition u-boot-spl-dtb {
-    in-partition-table = "no"
-    image = "u-boot-spl-dtb.img"
-    offset = 32K
-  }
-
-  partition u-boot-dtb {
-    in-partition-table = "no"
-    image = "u-boot-dtb.img"
-    offset = 128K
-  }
-
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-    size = 512M
-  }
-}