diff options
author | Thomas Petazzoni <thomas.petazzoni@bootlin.com> | 2019-02-22 21:44:42 +0100 |
---|---|---|
committer | Peter Korsgaard <peter@korsgaard.com> | 2019-02-22 22:19:19 +0100 |
commit | 6327a8f0d621df6b79e74ad2d1d3d9657099c13b (patch) | |
tree | 6c412292d1dd66031cbac3ff10d7e2eaf5608447 /board | |
parent | 12f644e2c52336579df74ac59089dc2aa0469c2b (diff) | |
download | buildroot-6327a8f0d621df6b79e74ad2d1d3d9657099c13b.tar.gz buildroot-6327a8f0d621df6b79e74ad2d1d3d9657099c13b.zip |
configs/zynq_zybo: remove defconfig
This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.
On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/165766194
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/digilent/zybo/genimage.cfg | 29 | ||||
-rwxr-xr-x | board/digilent/zybo/post-image.sh | 18 | ||||
-rw-r--r-- | board/digilent/zybo/readme.txt | 76 | ||||
-rw-r--r-- | board/digilent/zybo/system.bit | 0 | ||||
-rw-r--r-- | board/digilent/zybo/uEnv.txt | 5 |
5 files changed, 0 insertions, 128 deletions
diff --git a/board/digilent/zybo/genimage.cfg b/board/digilent/zybo/genimage.cfg deleted file mode 100644 index f39186d07b..0000000000 --- a/board/digilent/zybo/genimage.cfg +++ /dev/null @@ -1,29 +0,0 @@ -image boot.vfat { - vfat { - files = { - "BOOT.BIN", - "uEnv.txt", - "system.bit", - "zynq-zybo.dtb", - "u-boot-dtb.img", - "uImage" - } - } - size = 32M -} - -image sdcard.img { - hdimage { - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - } -} diff --git a/board/digilent/zybo/post-image.sh b/board/digilent/zybo/post-image.sh deleted file mode 100755 index 619cb9019e..0000000000 --- a/board/digilent/zybo/post-image.sh +++ /dev/null @@ -1,18 +0,0 @@ -#!/bin/sh - -BOARD_DIR="$(dirname $0)" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" -OUTPUT_DIR="${O}/images" - -rm -rf "${GENIMAGE_TMP}" - -cp board/digilent/zybo/uEnv.txt ${BINARIES_DIR} -cp board/digilent/zybo/system.bit ${BINARIES_DIR} - -genimage \ - --rootpath "${TARGET_DIR}" \ - --tmppath "${GENIMAGE_TMP}" \ - --inputpath "${BINARIES_DIR}" \ - --outputpath "${BINARIES_DIR}" \ - --config "${GENIMAGE_CFG}" diff --git a/board/digilent/zybo/readme.txt b/board/digilent/zybo/readme.txt deleted file mode 100644 index 4e7454c50d..0000000000 --- a/board/digilent/zybo/readme.txt +++ /dev/null @@ -1,76 +0,0 @@ -Digilent Zybo -============= - -This is the Buildroot board support for the Digilent Zybo. The Zybo is -a development board based on the Xilinx Zynq-7000 based All-Programmable -System-On-Chip. - -Zybo information including schematics, reference designs, and manuals are -available from http://store.digilentinc.com/zybo-zynq-7000-arm-fpga-soc-trainer-board/ . - -If you want a custom FPGA bitstream to be loaded by U-Boot, copy it as -system.bit in board/digilent/zybo/. - -Steps to create a working system for Zybo: - -1) make zynq_zybo_defconfig -2) make -3) write your SD Card with the sdcard.img file using dd by doing - $ sudo dd if=output/images/sdcard.img of=/dev/sdX -4) insert the SD Card and power up your Zybo -5) Expect serial console on the second USB serial port exposed by the board - -The expected output: - - U-Boot SPL 2016.05 (May 20 2016 - 16:16:24) - mmc boot - Trying to boot from MMC1 - reading system.dtb - spl_load_image_fat_os: error reading image system.dtb, err - -1 - reading u-boot-dtb.img - reading u-boot-dtb.img - - - U-Boot 2016.05 (May 20 2016 - 16:16:24 +0200) - - Model: Zynq ZYBO Development Board - Board: Xilinx Zynq - I2C: ready - DRAM: ECC disabled 512 MiB - MMC: sdhci@e0100000: 0 - SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB - In: serial@e0001000 - Out: serial@e0001000 - Err: serial@e0001000 - Model: Zynq ZYBO Development Board - Board: Xilinx Zynq - Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id - I2C EEPROM MAC address read failed - - Warning: ethernet@e000b000 (eth0) using random MAC address - 56:64:dd:a7:6d:94 - eth0: ethernet@e000b000 - ... - -Resulting system ----------------- -Once the build process is finished you will have an image called "sdcard.img" -in the output/images/ directory. - -The first partition is a FAT32 partition created at the beginning of the SD Card -that contains the following files : - /BOOT.BIN - /zynq-zybo.dtb - /uEnv.txt - /system.bit - /uImage - /u-boot-dtb.img - -The second partition is an ext4 partition that contains the root filesystem. - -You can alter the booting procedure by modifying the uEnv.txt file -in first partition of the SD card. It is a plain text file in format -<key>=<value> one per line: - -kernel_image=myimage -modeboot=myboot -myboot=... diff --git a/board/digilent/zybo/system.bit b/board/digilent/zybo/system.bit deleted file mode 100644 index e69de29bb2..0000000000 --- a/board/digilent/zybo/system.bit +++ /dev/null diff --git a/board/digilent/zybo/uEnv.txt b/board/digilent/zybo/uEnv.txt deleted file mode 100644 index 1042538a5d..0000000000 --- a/board/digilent/zybo/uEnv.txt +++ /dev/null @@ -1,5 +0,0 @@ -bootargs=root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 -fpga_image=system.bit -fpgaboot=if fatload mmc 0 0x1000000 ${fpga_image}; then echo Booting FPGA from ${fpga_image}; fpga info 0 && fpga loadb 0 0x1000000 $filesize; else echo FPGA image ${fpga_image} was not found, skipping...; fi; -kernel_image=uImage -sdboot=echo Booting from SD...; run fpgaboot; fatload mmc 0 0x1000000 ${kernel_image} && fatload mmc 0 0x2000000 zynq-zybo.dtb && bootm 0x1000000 - 0x2000000 |