diff options
Diffstat (limited to 'hw/npu2-opencapi.c')
| -rw-r--r-- | hw/npu2-opencapi.c | 50 |
1 files changed, 4 insertions, 46 deletions
diff --git a/hw/npu2-opencapi.c b/hw/npu2-opencapi.c index 905314cc..d32aaa53 100644 --- a/hw/npu2-opencapi.c +++ b/hw/npu2-opencapi.c @@ -48,11 +48,9 @@ #include <npu2.h> #include <npu2-regs.h> #include <phys-map.h> -#include <xive.h> #include <i2c.h> #include <nvram.h> -#define NPU_IRQ_LEVELS 35 #define NPU_IRQ_LEVELS_XSL 23 #define MAX_PE_HANDLE ((1 << 15) - 1) #define TL_MAX_TEMPLATE 63 @@ -1464,7 +1462,7 @@ static int npu2_add_mmio_regs(struct phb *phb, struct pci_device *pd, * Pass the hw irq number for the translation fault irq * irq levels 23 -> 26 are for translation faults, 1 per brick */ - irq = dev->npu->irq_base + NPU_IRQ_LEVELS_XSL; + irq = dev->npu->base_lsi + NPU_IRQ_LEVELS_XSL; if (stacku == NPU2_STACK_STCK_2U) irq += 2; if (block == NPU2_BLOCK_OTL1) @@ -1537,43 +1535,9 @@ static void mask_nvlink_fir(struct npu2 *p) NPU2_MISC_IRQ_ENABLE1, NPU2_MISC_DA_LEN_8B, reg); } -static int setup_irq(struct npu2 *p) +static int enable_xsl_irq(struct npu2 *p) { - uint64_t reg, mmio_addr; - uint32_t base; - - base = xive_alloc_ipi_irqs(p->chip_id, NPU_IRQ_LEVELS, 64); - if (base == XIVE_IRQ_ERROR) { - /** - * @fwts-label OCAPIIRQAllocationFailed - * @fwts-advice OpenCAPI IRQ setup failed. This is probably - * a firmware bug. OpenCAPI functionality will be broken. - */ - prlog(PR_ERR, "OCAPI: Couldn't allocate interrupts for NPU\n"); - return -1; - } - p->irq_base = base; - - xive_register_ipi_source(base, NPU_IRQ_LEVELS, NULL, NULL); - mmio_addr = (uint64_t ) xive_get_trigger_port(base); - prlog(PR_DEBUG, "OCAPI: NPU base irq %d @%llx\n", base, mmio_addr); - reg = (mmio_addr & NPU2_MISC_IRQ_BASE_MASK) << 13; - npu2_scom_write(p->chip_id, p->xscom_base, NPU2_MISC_IRQ_BASE, - NPU2_MISC_DA_LEN_8B, reg); - /* - * setup page size = 64k - * - * OS type is set to AIX: opal also runs with 2 pages per interrupt, - * so to cover the max offset for 35 levels of interrupt, we need - * bits 41 to 46, which is what the AIX setting does. There's no - * other meaning for that AIX setting. - */ - reg = npu2_scom_read(p->chip_id, p->xscom_base, NPU2_MISC_CFG, - NPU2_MISC_DA_LEN_8B); - reg |= NPU2_MISC_CFG_IPI_PS; - reg &= ~NPU2_MISC_CFG_IPI_OS; - npu2_scom_write(p->chip_id, p->xscom_base, NPU2_MISC_CFG, - NPU2_MISC_DA_LEN_8B, reg); + uint64_t reg; /* enable translation interrupts for all bricks */ reg = npu2_scom_read(p->chip_id, p->xscom_base, NPU2_MISC_IRQ_ENABLE2, @@ -1708,7 +1672,6 @@ int npu2_opencapi_init_npu(struct npu2 *npu) { struct npu2_dev *dev; uint64_t reg[2]; - int rc; assert(platform.ocapi); read_nvram_training_state(); @@ -1741,10 +1704,7 @@ int npu2_opencapi_init_npu(struct npu2 *npu) address_translation_config(npu->chip_id, npu->xscom_base, dev->brick_index); } - /* Procedure 13.1.3.10 - Interrupt Configuration */ - rc = setup_irq(npu); - if (rc) - goto failed; + enable_xsl_irq(npu); for (int i = 0; i < npu->total_devices; i++) { dev = &npu->devices[i]; @@ -1754,8 +1714,6 @@ int npu2_opencapi_init_npu(struct npu2 *npu) } return 0; -failed: - return -1; } static const struct phb_ops npu2_opencapi_ops = { |
