diff options
Diffstat (limited to 'external/pflash/test/results/05-bad-numbers.out')
| -rw-r--r-- | external/pflash/test/results/05-bad-numbers.out | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/external/pflash/test/results/05-bad-numbers.out b/external/pflash/test/results/05-bad-numbers.out new file mode 100644 index 00000000..211bd6a0 --- /dev/null +++ b/external/pflash/test/results/05-bad-numbers.out @@ -0,0 +1,217 @@ +Open-Power Flash tool VERSION +Usage: ./pflash [options] commands... + + Options: + -a address, --address=address + Specify the start address for erasing, reading + or flashing + + -s size, --size=size + Specify the size in bytes for erasing, reading + or flashing + + -P part_name, --partition=part_name + Specify the partition whose content is to be erased + programmed or read. This is an alternative to -a and -s + if both -P and -s are specified, the smallest of the + two will be used + + -f, --force + Don't ask for confirmation before erasing or flashing + + -d, --dummy + Don't write to flash + + --direct + Bypass all safety provided to you by the kernel driver + and use the flash driver built into pflash. + If you have mtd devices and you use this command, the + system may become unstable. + If you are reading this sentence then this flag is not + what you want! Using this feature without knowing + what it does can and likely will result in a bricked + machine + + -b, --bmc + Target BMC flash instead of host flash. + Note: This carries a high chance of bricking your BMC if you + don't know what you're doing. Consider --mtd to be safe(r) + + -F filename, --flash-file filename + Target filename instead of actual flash. + + -S, --side + Side of the flash on which to operate, 0 (default) or 1 + + -T, --toc + libffs TOC on which to operate, defaults to 0. + leading 0x is required for interpretation of a hex value + + -g + Enable verbose libflash debugging + + Commands: + -4, --enable-4B + Switch the flash and controller to 4-bytes address + mode (no confirmation needed). + + -3, --disable-4B + Switch the flash and controller to 3-bytes address + mode (no confirmation needed). + + -r file, --read=file + Read flash content from address into file, use -s + to specify the size to read (or it will use the source + file size if used in conjunction with -p and -s is not + specified). When using -r together with -e or -p, the + read will be performed first + + -E, --erase-all + Erase entire flash chip + (Not supported on all chips/controllers) + + -e, --erase + Erase the specified region. If size or address are not + specified, but '--program' is used, then the file + size will be used (rounded to an erase block) and the + address defaults to 0. + + -p file, --program=file + Will program the file to flash. If the address is not + specified, it will use 0. If the size is not specified + it will use the file size. Otherwise it will limit to + the specified size (whatever is smaller). If used in + conjunction with any erase command, the erase will + take place first. + + -t, --tune + Just tune the flash controller & access size + Must be used in conjuction with --direct + (Implicit for all other operations) + + -c --clear + Used to ECC clear a partition of the flash + Must be used in conjunction with -P. Will erase the + partition and then set all the ECC bits as they should be + + -i, --info + Display some information about the flash. + + --detail + Displays detailed info about a particular partition. + Accepts a numeric partition or can be used in conjuction + with the -P flag. + + -h, --help + This message. + +About to erase 0x00000300..0x00000400 ! +WARNING ! This will modify your HOST flash chip content ! +Enter "yes" to confirm:Erasing... + +[ ] 0% +[= ] 1% +[= ] 2% +[== ] 3% +[== ] 4% +[=== ] 5% +[=== ] 6% +[==== ] 7% +[==== ] 8% +[===== ] 9% +[===== ] 10% +[====== ] 11% +[====== ] 12% +[======= ] 13% +[======= ] 14% +[======== ] 15% +[======== ] 16% +[========= ] 17% +[========= ] 18% +[========== ] 19% +[========== ] 20% +[=========== ] 21% +[=========== ] 22% +[============ ] 23% +[============ ] 24% +[============= ] 25% +[============= ] 26% +[============== ] 27% +[============== ] 28% +[=============== ] 29% +[=============== ] 30% +[================ ] 31% +[================ ] 32% +[================= ] 33% +[================= ] 34% +[================== ] 35% +[================== ] 36% +[=================== ] 37% +[=================== ] 38% +[==================== ] 39% +[==================== ] 40% +[===================== ] 41% +[===================== ] 42% +[====================== ] 43% +[====================== ] 44% +[======================= ] 45% +[======================= ] 46% +[======================== ] 47% +[======================== ] 48% +[========================= ] 49% +[========================= ] 50% +[========================== ] 51% +[========================== ] 52% +[=========================== ] 53% +[=========================== ] 54% +[============================ ] 55% +[============================ ] 56% +[============================= ] 57% +[============================= ] 58% +[============================== ] 59% +[============================== ] 60% +[=============================== ] 61% +[=============================== ] 62% +[================================ ] 63% +[================================ ] 64% +[================================= ] 65% +[================================= ] 66% +[================================== ] 67% +[================================== ] 68% +[=================================== ] 69% +[=================================== ] 70% +[==================================== ] 71% +[==================================== ] 72% +[===================================== ] 73% +[===================================== ] 74% +[====================================== ] 75% +[====================================== ] 76% +[======================================= ] 77% +[======================================= ] 78% +[======================================== ] 79% +[======================================== ] 80% +[========================================= ] 81% +[========================================= ] 82% +[========================================== ] 83% +[========================================== ] 84% +[=========================================== ] 85% +[=========================================== ] 86% +[============================================ ] 87% +[============================================ ] 88% +[============================================= ] 89% +[============================================= ] 90% +[============================================== ] 91% +[============================================== ] 92% +[=============================================== ] 93% +[=============================================== ] 94% +[================================================ ] 95% +[================================================ ] 96% +[================================================= ] 97% +[================================================= ] 98% +[==================================================] 99% +[==================================================] 100% +About to program "FILE" at 0x00000300..0x00000400 ! +Programming & Verifying... + +[ ] 0% +[==================================================] 100% |
