[Subtree] Removing import-layers directory

As part of the move to subtrees, need to bring all the import layers
content to the top level.

Change-Id: I4a163d10898cbc6e11c27f776f60e1a470049d8f
Signed-off-by: Dave Cobbley <david.j.cobbley@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

4 files changed, 0 insertions, 130 deletions

diff --git a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/Add-target-to-only-build-tests-not-run-them.patch b/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/Add-target-to-only-build-tests-not-run-them.patch
deleted file mode 100644
index c007060ee..000000000
--- a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/Add-target-to-only-build-tests-not-run-them.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Add target to only build tests (not run them)
-
-Not sending upstream as this is only a start of a solution to
-installable tests: It's useful for us already as is.
-
-Upstream-Status: Inappropriate [not a complete solution]
-
-Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
-Refactored for 3.4
-Signed-off-by: Armin Kuster <akuster@mvista.com>
-
-Index: nettle-3.4/Makefile.in
-===================================================================
---- nettle-3.4.orig/Makefile.in
-+++ nettle-3.4/Makefile.in
-@@ -55,6 +55,9 @@ clean distclean mostlyclean maintainer-c
- 	  echo "Making $@ in $$d" ; (cd $$d && $(MAKE) $@); done
- 	$(MAKE) $@-here
- 
-+buildtest:
-+	echo "Making $@ in testsuite" ; (cd testsuite && $(MAKE) $@)
-+
- check-here:
- 	true
- 
-Index: nettle-3.4/testsuite/Makefile.in
-===================================================================
---- nettle-3.4.orig/testsuite/Makefile.in
-+++ nettle-3.4/testsuite/Makefile.in
-@@ -131,6 +131,8 @@ $(TARGETS) $(EXTRA_TARGETS): testutils.$
- # data.
- VALGRIND = valgrind --error-exitcode=1 --leak-check=full --show-reachable=yes @IF_ASM@ --partial-loads-ok=yes
- 
-+buildtest: $(TS_ALL)
-+
- # The PATH update is for windows dlls, DYLD_LIBRARY_PATH is for OSX.
- check: $(TS_ALL)
- 	LD_LIBRARY_PATH=../.lib PATH="../.lib:$$PATH" DYLD_LIBRARY_PATH=../.lib \
diff --git a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/check-header-files-of-openssl-only-if-enable_.patch b/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/check-header-files-of-openssl-only-if-enable_.patch
deleted file mode 100644
index d5f266681..000000000
--- a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/check-header-files-of-openssl-only-if-enable_.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From ffee6b5f6204a0210f717968ec6ce514d70acca1 Mon Sep 17 00:00:00 2001
-From: Haiqing Bai <Haiqing.Bai@windriver.com>
-Date: Fri, 9 Dec 2016 15:23:17 +0800
-Subject: [PATCH] nettle: check header files of openssl only if
- 'enable_openssl=yes'.
-
-The original configure script checks openssl header files to generate
-config.h even if 'enable_openssl' is not set to yes, this made inconsistent
-building for nettle.
-
-Upstream-Status: Pending
-Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
-
-refactored for 3.4. pending not in as of 3.4
-
-Signed-off-by: Armin Kuster <akuster@mvista.com>
-
-Index: nettle-3.4/configure.ac
-===================================================================
---- nettle-3.4.orig/configure.ac
-+++ nettle-3.4/configure.ac
-@@ -185,9 +185,11 @@ AC_HEADER_TIME
- AC_CHECK_SIZEOF(long)
- AC_CHECK_SIZEOF(size_t)
- 
--AC_CHECK_HEADERS([openssl/evp.h openssl/ecdsa.h],,
--[enable_openssl=no
-- break])
-+if test "x$enable_openssl" = "xyes"; then
-+  AC_CHECK_HEADERS([openssl/evp.h openssl/ecdsa.h],,
-+  [enable_openssl=no
-+   break])
-+fi
- 
- # For use by the testsuite
- AC_CHECK_HEADERS([valgrind/memcheck.h])
diff --git a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/dlopen-test.patch b/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/dlopen-test.patch
deleted file mode 100644
index c4f0b7ea1..000000000
--- a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/dlopen-test.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-Replace relative path of libnettle.so with absolute path so the test
-program can find it.
-Relative paths are not suitable, as the folder strucure for ptest
-is different from the one expected by the nettle testsuite.
-
-Upstream-Status: Inappropriate [embedded specific]
-
-Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
-
---- a/testsuite/dlopen-test.c	2016-10-01 00:28:38.000000000 -0700
-+++ b/testsuite/dlopen-test.c	2017-10-13 11:08:57.227572860 -0700
-@@ -9,7 +9,7 @@
- main (int argc UNUSED, char **argv UNUSED)
- {
- #if HAVE_LIBDL
--  void *handle = dlopen ("../libnettle.so", RTLD_NOW);
-+  void *handle = dlopen ("/usr/lib/libnettle.so", RTLD_NOW);
-   int (*get_version)(void);
-   if (!handle)
-     {
diff --git a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/run-ptest b/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/run-ptest
deleted file mode 100644
index b90bed66d..000000000
--- a/import-layers/yocto-poky/meta/recipes-support/nettle/nettle-3.4/run-ptest
+++ /dev/null
@@ -1,36 +0,0 @@
-#! /bin/sh
-
-cd testsuite
-
-failed=0
-all=0
-
-for f in *-test; do
-    if [ "$f" = "sha1-huge-test" ] ; then
-        echo "SKIP: $f (skipped for ludicrous run time)"
-        continue
-    fi
-
-    "./$f"
-    case "$?" in
-        0)
-            echo "PASS: $f"
-            all=$((all + 1))
-            ;;
-        77)
-            echo "SKIP: $f"
-            ;;
-        *)
-            echo "FAIL: $f"
-            failed=$((failed + 1))
-            all=$((all + 1))
-            ;;
-    esac
-done
-
-if [ "$failed" -eq 0 ] ; then
-  echo "All $all tests passed"
-else
-  echo "$failed of $all tests failed"
-fi
-