1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
/*
* Copyright (C) 2016 Marek Vasut <marex@denx.de>
*
* This code is based on drivers/video/fbdev/mxsfb.c :
* Copyright (C) 2010 Juergen Beisert, Pengutronix
* Copyright (C) 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_of.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_simple_kms_helper.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/of_graph.h>
#include <linux/platform_data/simplefb.h>
#include <video/videomode.h>
#include "mxsfb_drv.h"
#include "mxsfb_regs.h"
static u32 set_hsync_pulse_width(struct mxsfb_drm_private *mxsfb, u32 val)
{
return (val & mxsfb->devdata->hs_wdth_mask) <<
mxsfb->devdata->hs_wdth_shift;
}
/* Setup the MXSFB registers for decoding the pixels out of the framebuffer */
static int mxsfb_set_pixel_fmt(struct mxsfb_drm_private *mxsfb)
{
struct drm_crtc *crtc = &mxsfb->pipe.crtc;
struct drm_device *drm = crtc->dev;
const u32 format = crtc->primary->state->fb->pixel_format;
u32 ctrl, ctrl1;
ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER;
/*
* WARNING: The bus width, CTRL_SET_BUS_WIDTH(), is configured to
* match the selected mode here. This differs from the original
* MXSFB driver, which had the option to configure the bus width
* to arbitrary value. This limitation should not pose an issue.
*/
/* CTRL1 contains IRQ config and status bits, preserve those. */
ctrl1 = readl(mxsfb->base + LCDC_CTRL1);
ctrl1 &= CTRL1_CUR_FRAME_DONE_IRQ_EN | CTRL1_CUR_FRAME_DONE_IRQ;
switch (format) {
case DRM_FORMAT_RGB565:
dev_dbg(drm->dev, "Setting up RGB565 mode\n");
ctrl |= CTRL_SET_BUS_WIDTH(STMLCDIF_16BIT);
ctrl |= CTRL_SET_WORD_LENGTH(0);
ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0xf);
break;
case DRM_FORMAT_XRGB8888:
dev_dbg(drm->dev, "Setting up XRGB8888 mode\n");
ctrl |= CTRL_SET_BUS_WIDTH(STMLCDIF_24BIT);
ctrl |= CTRL_SET_WORD_LENGTH(3);
/* Do not use packed pixels = one pixel per word instead. */
ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0x7);
break;
default:
dev_err(drm->dev, "Unhandled pixel format %08x\n", format);
return -EINVAL;
}
writel(ctrl1, mxsfb->base + LCDC_CTRL1);
writel(ctrl, mxsfb->base + LCDC_CTRL);
return 0;
}
static void mxsfb_enable_controller(struct mxsfb_drm_private *mxsfb)
{
u32 reg;
if (mxsfb->clk_disp_axi)
clk_prepare_enable(mxsfb->clk_disp_axi);
clk_prepare_enable(mxsfb->clk);
mxsfb_enable_axi_clk(mxsfb);
/* If it was disabled, re-enable the mode again */
writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_SET);
/* Enable the SYNC signals first, then the DMA engine */
reg = readl(mxsfb->base + LCDC_VDCTRL4);
reg |= VDCTRL4_SYNC_SIGNALS_ON;
writel(reg, mxsfb->base + LCDC_VDCTRL4);
writel(CTRL_RUN, mxsfb->base + LCDC_CTRL + REG_SET);
}
static void mxsfb_disable_controller(struct mxsfb_drm_private *mxsfb)
{
u32 reg;
/*
* Even if we disable the controller here, it will still continue
* until its FIFOs are running out of data
*/
writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_CLR);
readl_poll_timeout(mxsfb->base + LCDC_CTRL, reg, !(reg & CTRL_RUN),
0, 1000);
reg = readl(mxsfb->base + LCDC_VDCTRL4);
reg &= ~VDCTRL4_SYNC_SIGNALS_ON;
writel(reg, mxsfb->base + LCDC_VDCTRL4);
mxsfb_disable_axi_clk(mxsfb);
clk_disable_unprepare(mxsfb->clk);
if (mxsfb->clk_disp_axi)
clk_disable_unprepare(mxsfb->clk_disp_axi);
}
static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
{
struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
int err;
/*
* It seems, you can't re-program the controller if it is still
* running. This may lead to shifted pictures (FIFO issue?), so
* first stop the controller and drain its FIFOs.
*/
mxsfb_enable_axi_clk(mxsfb);
/* Clear the FIFOs */
writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
err = mxsfb_set_pixel_fmt(mxsfb);
if (err)
return;
clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
writel(TRANSFER_COUNT_SET_VCOUNT(m->crtc_vdisplay) |
TRANSFER_COUNT_SET_HCOUNT(m->crtc_hdisplay),
mxsfb->base + mxsfb->devdata->transfer_count);
vsync_pulse_len = m->crtc_vsync_end - m->crtc_vsync_start;
vdctrl0 = VDCTRL0_ENABLE_PRESENT | /* Always in DOTCLOCK mode */
VDCTRL0_VSYNC_PERIOD_UNIT |
VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
VDCTRL0_SET_VSYNC_PULSE_WIDTH(vsync_pulse_len);
if (m->flags & DRM_MODE_FLAG_PHSYNC)
vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
if (m->flags & DRM_MODE_FLAG_PVSYNC)
vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0);
/* Frame length in lines. */
writel(m->crtc_vtotal, mxsfb->base + LCDC_VDCTRL1);
/* Line length in units of clocks or pixels. */
hsync_pulse_len = m->crtc_hsync_end - m->crtc_hsync_start;
writel(set_hsync_pulse_width(mxsfb, hsync_pulse_len) |
VDCTRL2_SET_HSYNC_PERIOD(m->crtc_htotal),
mxsfb->base + LCDC_VDCTRL2);
writel(SET_HOR_WAIT_CNT(m->crtc_hblank_end - m->crtc_hsync_end) |
SET_VERT_WAIT_CNT(m->crtc_vblank_end - m->crtc_vsync_end),
mxsfb->base + LCDC_VDCTRL3);
writel(SET_DOTCLK_H_VALID_DATA_CNT(m->hdisplay),
mxsfb->base + LCDC_VDCTRL4);
mxsfb_disable_axi_clk(mxsfb);
}
void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
{
mxsfb_crtc_mode_set_nofb(mxsfb);
mxsfb_enable_controller(mxsfb);
}
void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
{
mxsfb_disable_controller(mxsfb);
}
void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
struct drm_plane_state *state)
{
struct drm_simple_display_pipe *pipe = &mxsfb->pipe;
struct drm_crtc *crtc = &pipe->crtc;
struct drm_framebuffer *fb = pipe->plane.state->fb;
struct drm_pending_vblank_event *event;
struct drm_gem_cma_object *gem;
if (!crtc)
return;
spin_lock_irq(&crtc->dev->event_lock);
event = crtc->state->event;
if (event) {
crtc->state->event = NULL;
if (drm_crtc_vblank_get(crtc) == 0) {
drm_crtc_arm_vblank_event(crtc, event);
} else {
drm_crtc_send_vblank_event(crtc, event);
}
}
spin_unlock_irq(&crtc->dev->event_lock);
if (!fb)
return;
gem = drm_fb_cma_get_gem_obj(fb, 0);
mxsfb_enable_axi_clk(mxsfb);
writel(gem->paddr, mxsfb->base + mxsfb->devdata->next_buf);
mxsfb_disable_axi_clk(mxsfb);
}
|
