path: root/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

// SPDX-License-Identifier: GPL-2.0 OR X11
/*
 * Copyright 2015 Boundary Devices, Inc.
 */
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	chosen {
		stdout-path = &uart2;
	};

	memory@10000000 {
		reg = <0x10000000 0xF0000000>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_1p8v: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "1P8V";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-always-on;
		};

		reg_2p5v: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "2P5V";
			regulator-min-microvolt = <2500000>;
			regulator-max-microvolt = <2500000>;
			regulator-always-on;
		};

		reg_3p3v: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_otg_vbus: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_usb_h1_vbus: regulator@4 {
			compatible = "regulator-fixed";
			reg = <4>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usbh1>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_wlan_vmmc: regulator@5 {
			compatible = "regulator-fixed";
			reg = <5>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_wlan_vmmc>;
			regulator-name = "reg_wlan_vmmc";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
			startup-delay-us = <70000>;
			enable-active-high;
		};

		reg_can_xcvr: regulator@6 {
			compatible = "regulator-fixed";
			reg = <6>;
			regulator-name = "CAN XCVR";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_can_xcvr>;
			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_keys>;

		power {
			label = "Power Button";
			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			wakeup-source;
		};

		menu {
			label = "Menu";
			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_MENU>;
		};

		home {
			label = "Home";
			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_HOME>;
		};

		back {
			label = "Back";
			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_BACK>;
		};

		volume-up {
			label = "Volume Up";
			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
		};

		volume-down {
			label = "Volume Down";
			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEDOWN>;
		};
	};

	i2c2mux {
		compatible = "i2c-mux-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c2mux>;
		#address-cells = <1>;
		#size-cells = <0>;
		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
			     &gpio4 15 GPIO_ACTIVE_HIGH>;
		i2c-parent = <&i2c2>;
		idle-state = <0>;

		i2c2mux@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c2mux@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};

	i2c3mux {
		compatible = "i2c-mux-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c3mux>;
		#address-cells = <1>;
		#size-cells = <0>;
		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
		i2c-parent = <&i2c3>;
		idle-state = <0>;

		i2c3mux@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};

	leds {
		compatible = "gpio-leds";

		speaker-enable {
			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
			retain-state-suspended;
			default-state = "off";
		};

		ttymxc4-rs232 {
			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
			retain-state-suspended;
			default-state = "on";
		};
	};

	backlight_lcd: backlight-lcd {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_3p3v>;
		status = "okay";
	};

	backlight_lvds0: backlight-lvds0 {
		compatible = "pwm-backlight";
		pwms = <&pwm4 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_3p3v>;
		status = "okay";
	};

	backlight_lvds1: backlight-lvds1 {
		compatible = "pwm-backlight";
		pwms = <&pwm2 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_3p3v>;
		status = "okay";
	};

	lcd_display: disp0 {
		compatible = "fsl,imx-parallel-display";
		#address-cells = <1>;
		#size-cells = <0>;
		interface-pix-fmt = "bgr666";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_j15>;
		status = "okay";

		port@0 {
			reg = <0>;

			lcd_display_in: endpoint {
				remote-endpoint = <&ipu1_di0_disp0>;
			};
		};

		port@1 {
			reg = <1>;

			lcd_display_out: endpoint {
				remote-endpoint = <&lcd_panel_in>;
			};
		};
	};

	panel-lcd {
		compatible = "okaya,rs800480t-7x0gp";
		backlight = <&backlight_lcd>;

		port {
			lcd_panel_in: endpoint {
				remote-endpoint = <&lcd_display_out>;
			};
		};
	};

	panel-lvds0 {
		compatible = "hannstar,hsd100pxn1";
		backlight = <&backlight_lvds0>;

		port {
			panel_in_lvds0: endpoint {
				remote-endpoint = <&lvds0_out>;
			};
		};
	};

	panel-lvds1 {
		compatible = "hannstar,hsd100pxn1";
		backlight = <&backlight_lvds1>;

		port {
			panel_in_lvds1: endpoint {
				remote-endpoint = <&lvds1_out>;
			};
		};
	};

	sound {
		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
			     "fsl,imx-audio-sgtl5000";
		model = "imx6q-nitrogen6_max-sgtl5000";
		ssi-controller = <&ssi1>;
		audio-codec = <&codec>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
		mux-int-port = <1>;
		mux-ext-port = <3>;
	};
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can1>;
	xceiver-supply = <&reg_can_xcvr>;
	status = "okay";
};

&clks {
	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};

&ecspi1 {
	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	status = "okay";

	flash: m25p80@0 {
		compatible = "microchip,sst25vf016b";
		spi-max-frequency = <20000000>;
		reg = <0>;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rgmii";
	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
	txen-skew-ps = <0>;
	txc-skew-ps = <3000>;
	rxdv-skew-ps = <0>;
	rxc-skew-ps = <3000>;
	rxd0-skew-ps = <0>;
	rxd1-skew-ps = <0>;
	rxd2-skew-ps = <0>;
	rxd3-skew-ps = <0>;
	txd0-skew-ps = <0>;
	txd1-skew-ps = <0>;
	txd2-skew-ps = <0>;
	txd3-skew-ps = <0>;
	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
	fsl,err006687-workaround-present;
	status = "okay";
};

&hdmi {
	ddc-i2c-bus = <&i2c2>;
	status = "okay";
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	codec: sgtl5000@a {
		compatible = "fsl,sgtl5000";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_sgtl5000>;
		reg = <0x0a>;
		clocks = <&clks IMX6QDL_CLK_CKO>;
		VDDA-supply = <&reg_2p5v>;
		VDDIO-supply = <&reg_3p3v>;
	};

	rtc: rtc@68 {
		compatible = "microcrystal,rv4162";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_rv4162>;
		reg = <0x68>;
		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	touchscreen@4 {
		compatible = "eeti,egalax_ts";
		reg = <0x04>;
		interrupt-parent = <&gpio1>;
		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	};

	touchscreen@38 {
		compatible = "edt,edt-ft5x06";
		reg = <0x38>;
		interrupt-parent = <&gpio1>;
		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
		wakeup-source;
	};
};

&iomuxc {
	imx6q-nitrogen6-max {
		pinctrl_audmux: audmuxgrp {
			fsl,pins = <
				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
			>;
		};

		pinctrl_can1: can1grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
			>;
		};

		pinctrl_can_xcvr: can-xcvrgrp {
			fsl,pins = <
				/* Flexcan XCVR enable */
				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
			>;
		};

		pinctrl_ecspi1: ecspi1grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
			>;
		};

		pinctrl_enet: enetgrp {
			fsl,pins = <
				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
				/* Phy reset */
				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
			>;
		};

		pinctrl_gpio_keys: gpio-keysgrp {
			fsl,pins = <
				/* Power Button */
				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
				/* Menu Button */
				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
				/* Home Button */
				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
				/* Back Button */
				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
				/* Volume Up Button */
				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
				/* Volume Down Button */
				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
			>;
		};

		pinctrl_i2c2mux: i2c2muxgrp {
			fsl,pins = <
				/* ov5642 camera i2c enable */
				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
				/* ov5640_mipi camera i2c enable */
				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
			>;
		};

		pinctrl_i2c3: i2c3grp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
			>;
		};

		pinctrl_i2c3mux: i2c3muxgrp {
			fsl,pins = <
				/* PCIe I2C enable */
				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
			>;
		};

		pinctrl_j15: j15grp {
			fsl,pins = <
				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
			>;
		};

		pinctrl_pcie: pciegrp {
			fsl,pins = <
				/* PCIe reset */
				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
			>;
		};

		pinctrl_pwm1: pwm1grp {
			fsl,pins = <
				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
			>;
		};

		pinctrl_pwm2: pwm2grp {
			fsl,pins = <
				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
			>;
		};

		pinctrl_pwm3: pwm3grp {
			fsl,pins = <
				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
			>;
		};

		pinctrl_pwm4: pwm4grp {
			fsl,pins = <
				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
			>;
		};

		pinctrl_rv4162: rv4162grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
			>;
		};

		pinctrl_sgtl5000: sgtl5000grp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
			>;
		};

		pinctrl_uart1: uart1grp {
			fsl,pins = <
				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_uart2: uart2grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_uart5: uart5grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
				/* RS485 RX Enable: pull up */
				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
				/* RS485 DEN: pull down */
				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
				/* RS485/!RS232 Select: pull down (rs232) */
				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
				/* ON: pull down */
				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
			>;
		};

		pinctrl_usbh1: usbh1grp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
			>;
		};

		pinctrl_usbotg: usbotggrp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
				/* power enable, high active */
				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
			>;
		};

		pinctrl_usdhc2: usdhc2grp {
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
			>;
		};

		pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
			>;
		};

		pinctrl_usdhc4: usdhc4grp {
			fsl,pins = <
				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
			>;
		};

		pinctrl_wlan_vmmc: wlan-vmmcgrp {
			fsl,pins = <
				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
			>;
		};
	};
};

&ipu1_di0_disp0 {
	remote-endpoint = <&lcd_display_in>;
};

&ldb {
	status = "okay";

	lvds-channel@0 {
		status = "okay";

		port@4 {
			reg = <4>;

			lvds0_out: endpoint {
				remote-endpoint = <&panel_in_lvds0>;
			};
		};
	};

	lvds-channel@1 {
		status = "okay";

		port@4 {
			reg = <4>;

			lvds1_out: endpoint {
				remote-endpoint = <&panel_in_lvds1>;
			};
		};
	};
};

&pcie {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pcie>;
	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&pwm2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm2>;
	status = "okay";
};

&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm3>;
	status = "okay";
};

&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm4>;
	status = "okay";
};

&ssi1 {
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart5>;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usb_h1_vbus>;
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	disable-over-current;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2>;
	bus-width = <4>;
	non-removable;
	vmmc-supply = <&reg_wlan_vmmc>;
	cap-power-off-card;
	keep-power-in-suspend;
	status = "okay";

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1271";
		reg = <2>;
		interrupt-parent = <&gpio6>;
		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
		ref-clock-frequency = <38400000>;
	};
};

&usdhc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3>;
	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
	bus-width = <4>;
	vmmc-supply = <&reg_3p3v>;
	status = "okay";
};

&usdhc4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc4>;
	bus-width = <8>;
	non-removable;
	vmmc-supply = <&reg_1p8v>;
	keep-power-in-suspend;
	status = "okay";
};