1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
Qualcomm ADSP Peripheral Image Loader
This document defines the binding for a component that loads and boots firmware
on the Qualcomm ADSP Hexagon core.
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,msm8974-adsp-pil"
"qcom,msm8996-adsp-pil"
"qcom,msm8996-slpi-pil"
"qcom,sdm845-adsp-pas"
"qcom,sdm845-cdsp-pas"
- interrupts-extended:
Usage: required
Value type: <prop-encoded-array>
Definition: must list the watchdog, fatal IRQs ready, handover and
stop-ack IRQs
- interrupt-names:
Usage: required
Value type: <stringlist>
Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
- clocks:
Usage: required
Value type: <prop-encoded-array>
Definition: reference to the xo clock and optionally aggre2 clock to be
held on behalf of the booting Hexagon core
- clock-names:
Usage: required
Value type: <stringlist>
Definition: must be "xo" and optionally include "aggre2"
- cx-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulator to be held on behalf of the
booting Hexagon core
- px-supply:
Usage: required
Value type: <phandle>
Definition: reference to the px regulator to be held on behalf of the
booting Hexagon core
- memory-region:
Usage: required
Value type: <phandle>
Definition: reference to the reserved-memory for the ADSP
- qcom,smem-states:
Usage: required
Value type: <phandle>
Definition: reference to the smem state for requesting the ADSP to
shut down
- qcom,smem-state-names:
Usage: required
Value type: <stringlist>
Definition: must be "stop"
= SUBNODES
The adsp node may have an subnode named either "smd-edge" or "glink-edge" that
describes the communication edge, channels and devices related to the ADSP.
See ../soc/qcom/qcom,smd.txt and ../soc/qcom/qcom,glink.txt for details on how
to describe these.
= EXAMPLE
The following example describes the resources needed to boot control the
ADSP, as it is found on MSM8974 boards.
adsp {
compatible = "qcom,msm8974-adsp-pil";
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog",
"fatal",
"ready",
"handover",
"stop-ack";
clocks = <&rpmcc RPM_CXO_CLK>;
clock-names = "xo";
cx-supply = <&pm8841_s2>;
memory-region = <&adsp_region>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
smd-edge {
interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
};
};
The following example describes the resources needed to boot control the
SLPI, as it is found on MSM8996 boards.
slpi {
compatible = "qcom,msm8996-slpi-pil";
interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog",
"fatal",
"ready",
"handover",
"stop-ack";
clocks = <&rpmcc MSM8996_RPM_SMD_XO_CLK_SRC>,
<&rpmcc MSM8996_RPM_SMD_AGGR2_NOC_CLK>;
clock-names = "xo", "aggre2";
cx-supply = <&pm8994_l26>;
px-supply = <&pm8994_lvs2>;
memory-region = <&slpi_region>;
qcom,smem-states = <&slpi_smp2p_out 0>;
qcom,smem-state-names = "stop";
};
|
