1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
|
* Generic PM domains
System on chip designs are often divided into multiple PM domains that can be
used for power gating of selected IP blocks for power saving by reduced leakage
current.
This device tree binding can be used to bind PM domain consumer devices with
their PM domains provided by PM domain providers. A PM domain provider can be
represented by any node in the device tree and can provide one or more PM
domains. A consumer node can refer to the provider by a phandle and a set of
phandle arguments (so called PM domain specifiers) of length specified by the
#power-domain-cells property in the PM domain provider node.
==PM domain providers==
Required properties:
- #power-domain-cells : Number of cells in a PM domain specifier;
Typically 0 for nodes representing a single PM domain and 1 for nodes
providing multiple PM domains (e.g. power controllers), but can be any value
as specified by device tree binding documentation of particular provider.
Optional properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
Some power domains might be powered from another power domain (or have
other hardware specific dependencies). For representing such dependency
a standard PM domain consumer binding is used. When provided, all domains
created by the given provider should be subdomains of the domain
specified by this binding. More details about power domain specifier are
available in the next section.
- domain-idle-states : A phandle of an idle-state that shall be soaked into a
generic domain power state. The idle state definitions are
compatible with domain-idle-state specified in [1]. phandles
that are not compatible with domain-idle-state will be
ignored.
The domain-idle-state property reflects the idle state of this PM domain and
not the idle states of the devices or sub-domains in the PM domain. Devices
and sub-domains have their own idle-states independent of the parent
domain's idle states. In the absence of this property, the domain would be
considered as capable of being powered-on or powered-off.
- operating-points-v2 : Phandles to the OPP tables of power domains provided by
a power domain provider. If the provider provides a single power domain only
or all the power domains provided by the provider have identical OPP tables,
then this shall contain a single phandle. Refer to ../opp/opp.txt for more
information.
Example:
power: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
};
The node above defines a power controller that is a PM domain provider and
expects one cell as its phandle argument.
Example 2:
parent: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
};
child: power-controller@12341000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
#power-domain-cells = <1>;
};
The nodes above define two power controllers: 'parent' and 'child'.
Domains created by the 'child' power controller are subdomains of '0' power
domain provided by the 'parent' power controller.
Example 3:
parent: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <0>;
domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
};
child: power-controller@12341000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent>;
#power-domain-cells = <0>;
domain-idle-states = <&DOMAIN_PWR_DN>;
};
DOMAIN_RET: state@0 {
compatible = "domain-idle-state";
reg = <0x0>;
entry-latency-us = <1000>;
exit-latency-us = <2000>;
min-residency-us = <10000>;
};
DOMAIN_PWR_DN: state@1 {
compatible = "domain-idle-state";
reg = <0x1>;
entry-latency-us = <5000>;
exit-latency-us = <8000>;
min-residency-us = <7000>;
};
==PM domain consumers==
Required properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
Example:
leaky-device@12350000 {
compatible = "foo,i-leak-current";
reg = <0x12350000 0x1000>;
power-domains = <&power 0>;
};
The node above defines a typical PM domain consumer device, which is located
inside a PM domain with index 0 of a power controller represented by a node
with the label "power".
Optional properties:
- required-opps: This contains phandle to an OPP node in another device's OPP
table. It may contain an array of phandles, where each phandle points to an
OPP of a different device. It should not contain multiple phandles to the OPP
nodes in the same OPP table. This specifies the minimum required OPP of the
device(s), whose OPP's phandle is present in this property, for the
functioning of the current device at the current OPP (where this property is
present).
Example:
- OPP table for domain provider that provides two domains.
domain0_opp_table: opp-table0 {
compatible = "operating-points-v2";
domain0_opp_0: opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <975000 970000 985000>;
};
domain0_opp_1: opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1000000 980000 1010000>;
};
};
domain1_opp_table: opp-table1 {
compatible = "operating-points-v2";
domain1_opp_0: opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <975000 970000 985000>;
};
domain1_opp_1: opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1000000 980000 1010000>;
};
};
power: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>;
};
leaky-device0@12350000 {
compatible = "foo,i-leak-current";
reg = <0x12350000 0x1000>;
power-domains = <&power 0>;
required-opps = <&domain0_opp_0>;
};
leaky-device1@12350000 {
compatible = "foo,i-leak-current";
reg = <0x12350000 0x1000>;
power-domains = <&power 1>;
required-opps = <&domain1_opp_1>;
};
[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
|
