summaryrefslogtreecommitdiffstats
path: root/net/mac80211/cfg.c
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: use more bits for ack_frame_idJohannes Berg2020-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | It turns out that this wasn't a good idea, I hit a test failure in hwsim due to this. That particular failure was easily worked around, but it raised questions: if an AP needs to, for example, send action frames to each connected station, the current limit is nowhere near enough (especially if those stations are sleeping and the frames are queued for a while.) Shuffle around some bits to make more room for ack_frame_id to allow up to 8192 queued up frames, that's enough for queueing 4 frames to each connected station, even at the maximum of 2007 stations on a single AP. We take the bits from band (which currently only 2 but I leave 3 in case we add another band) and from the hw_queue, which can only need 4 since it has a limit of 16 queues. Fixes: 6912daed05e1 ("mac80211: Shrink the size of ack_frame_id to make room for tx_time_est") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200115122549.b9a4ef9f4980.Ied52ed90150220b83a280009c590b65d125d087c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Fix radar event during another phy CACOrr Mazor2020-01-151-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC. If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there. If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant. To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com [slightly reformat/reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Shrink the size of ack_frame_id to make room for tx_time_estToke Høiland-Jørgensen2019-11-081-1/+1
| | | | | | | | | | | | | | | | | | To implement airtime queue limiting, we need to keep a running account of the estimated airtime of all skbs queued into the device. Do to this correctly, we need to store the airtime estimate into the skb so we can decrease the outstanding balance when the skb is freed. This means that the time estimate must be stored somewhere that will survive for the lifetime of the skb. To get this, decrease the size of the ack_frame_id field to 6 bits, and lower the size of the ID space accordingly. This leaves 10 bits for use for tx_time_est, which is enough to store a maximum of 4096 us, if we shift the values so they become units of 4us. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/157182474063.150713.16132669599100802716.stgit@toke.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2019-09-151-10/+4
|\ | | | | | | | | | | Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: Do not send Layer 2 Update frame before authorizationJouni Malinen2019-09-111-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Layer 2 Update frame is used to update bridges when a station roams to another AP even if that STA does not transmit any frames after the reassociation. This behavior was described in IEEE Std 802.11F-2003 as something that would happen based on MLME-ASSOCIATE.indication, i.e., before completing 4-way handshake. However, this IEEE trial-use recommended practice document was published before RSN (IEEE Std 802.11i-2004) and as such, did not consider RSN use cases. Furthermore, IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been maintained amd should not be used anymore. Sending out the Layer 2 Update frame immediately after association is fine for open networks (and also when using SAE, FT protocol, or FILS authentication when the station is actually authenticated by the time association completes). However, it is not appropriate for cases where RSN is used with PSK or EAP authentication since the station is actually fully authenticated only once the 4-way handshake completes after authentication and attackers might be able to use the unauthenticated triggering of Layer 2 Update frame transmission to disrupt bridge behavior. Fix this by postponing transmission of the Layer 2 Update frame from station entry addition to the point when the station entry is marked authorized. Similarly, send out the VLAN binding update only if the STA entry has already been authorized. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2019-08-271-4/+5
|\ \ | |/ | | | | | | | | | | Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: fix possible sta leakJohannes Berg2019-08-211-4/+5
| | | | | | | | | | | | | | | | | | | | If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: allow setting spatial reuse parameters from bss_confJohn Crispin2019-07-311-1/+4
| | | | | | | | | | | | | | | | | | | | Store the OBSS PD parameters inside bss_conf when bringing up an AP and/or when a station connects to an AP. This allows the driver to configure the HW accordingly. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-3-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: reject zero MAC address in add stationKarthikeyan Periyasamy2019-07-311-1/+1
|/ | | | | | | | | | | This came up in fuzz testing, and really we don't consider all-zeroes to be a valid MAC address in most places, so also reject it here to avoid confusion later on. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Link: https://lore.kernel.org/r/1563959770-21570-1-git-send-email-periyasa@codeaurora.org [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix possible memory leak in ieee80211_assign_beaconLorenzo Bianconi2019-07-201-2/+6
| | | | | | | | | | | Free new beacon_data in ieee80211_assign_beacon whenever ieee80211_assign_beacon fails Fixes: 8860020e0be1 ("cfg80211: restructure AP/GO mode API") Fixes: bc847970f432 ("mac80211: support FTM responder configuration/statistic") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/770285772543c9fca33777bb4ad4760239e56256.1562105631.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2019-07-111-2/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-06-171-2/+2
| |\ | | | | | | | | | | | | | | | | | | Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | mac80211: use STA info in rate_control_send_low()Johannes Berg2019-06-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if we have a station, we currently call rate_control_send_low() with the NULL station unless further rate control (driver, minstrel) has been initialized. Change this so we can use more information about the station to use a better rate. For example, when we associate with an AP, we will now use the lowest rate it advertised as supported (that we can) rather than the lowest mandatory rate. This aligns our behaviour with most other 802.11 implementations. To make this possible, we need to also ensure that we have non-zero rates at all times, so in case we really have *nothing* pre-fill the supp_rates bitmap with the very lowest mandatory bitmap (11b and 11a on 2.4 and 5 GHz respectively). Additionally, hostapd appears to be giving us an empty supported rates bitmap (it can and should do better, since the STA must have supported for at least the basic rates in the BSS), so ignore any such bitmaps that would actually zero out the supp_rates, and in that case just keep the pre-filled mandatory rates. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: allow turning TWT responder support on and off via netlinkJohn Crispin2019-06-141-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the userland daemon to en/disable TWT support for an AP. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> [simplify parsing code] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | Merge branch 'linus' of ↵Linus Torvalds2019-07-081-2/+2
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
| * | net/mac80211: move WEP handling to ARC4 library interfaceArd Biesheuvel2019-06-201-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The WEP code in the mac80211 subsystem currently uses the crypto API to access the arc4 (RC4) cipher, which is overly complicated, and doesn't really have an upside in this particular case, since ciphers are always synchronous and therefore always implemented in software. Given that we have no accelerated software implementations either, it is much more straightforward to invoke a generic library interface directly. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432Thomas Gleixner2019-06-051-2/+1
|/ | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this file is gplv2 as found in copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.657082701@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mac80211: probe unexercised mesh linksRajkumar Manoharan2019-04-261-0/+1
| | | | | | | | | | | | | | The requirement for mesh link metric refreshing, is that from one mesh point we be able to send some data frames to other mesh points which are not currently selected as a primary traffic path, but which are only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: store tx power value from user to stationAshok Raj Nagarajan2019-04-261-0/+9
| | | | | | | | | | | This patch introduce a new driver callback drv_sta_set_txpwr. This API will copy the transmit power value passed from user space and call the driver callback to set the tx power for the station. Co-developed-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Ashok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: IEEE 802.11 Extended Key ID supportAlexander Wetzel2019-04-261-0/+36
| | | | | | | | | | | | | | | | | Add support for Extended Key ID as defined in IEEE 802.11-2016. - Implement the nl80211 API for Extended Key ID - Extend mac80211 API to allow drivers to support Extended Key ID - Enable Extended Key ID by default for drivers only supporting SW crypto (e.g. mac80211_hwsim) - Allow unicast Tx usage to be supressed (IEEE80211_KEY_FLAG_NO_AUTO_TX) - Select the decryption key based on the MPDU keyid - Enforce existing assumptions in the code that rekeys don't change the cipher Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [remove module parameter] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-02-201-1/+5
|\ | | | | | | | | | | | | Two easily resolvable overlapping change conflicts, one in TCP and one in the eBPF verifier. Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: Restore vif beacon interval if start ap failsRakesh Pillai2019-02-151-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval. The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value. In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval. To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval. Tested on ath10k using WCN3990. Cc: stable@vger.kernel.org Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg2019-02-011-0/+4
|\ \ | |/ | | | | | | | | | | Merge net-next so that we get the changes from net, which would otherwise conflict with the NLA_POLICY_NESTED/_ARRAY changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori2019-01-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: mesh: use average bitrate for link metric calculationJulan Hsu2019-01-191-0/+5
| | | | | | | | | | | | | | | | Use bitrate moving average to smooth out link metric and stablize path selection. Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211/mac80211: mesh: add mesh path change count to mpath infoJulan Hsu2019-01-191-1/+3
| | | | | | | | | | | | | | Expose path change count to destination in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211/mac80211: mesh: add hop count to mpath infoJulan Hsu2019-01-191-1/+3
| | | | | | | | | | | | | | Expose hop count to destination information in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: Add airtime accounting and scheduling to TXQsToke Høiland-Jørgensen2019-01-191-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds airtime accounting and scheduling to the mac80211 TXQ scheduler. A new callback, ieee80211_sta_register_airtime(), is added that drivers can call to report airtime usage for stations. When airtime information is present, mac80211 will schedule TXQs (through ieee80211_next_txq()) in a way that enforces airtime fairness between active stations. This scheduling works the same way as the ath9k in-driver airtime fairness scheduling. If no airtime usage is reported by the driver, the scheduler will default to round-robin scheduling. For drivers that don't control TXQ scheduling in software, a new API function, ieee80211_txq_may_transmit(), is added which the driver can use to check if the TXQ is eligible for transmission, or should be throttled to enforce fairness. Calls to this function must also be enclosed in ieee80211_txq_schedule_{start,end}() calls to ensure proper locking. The API ieee80211_txq_may_transmit() also ensures that TXQ list will be aligned aginst driver's own round-robin scheduler list. i.e it rotates the TXQ list till it makes the requested node becomes the first entry in TXQ list. Thus both the TXQ list and driver's list are in sync. Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Louie Lu <git@louie.lu> [added debugfs write op to reset airtime counter] Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'mac80211-next-for-davem-2018-12-19' of ↵David S. Miller2018-12-191-2/+27
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have too many changes to list, highlights: * virt_wifi - wireless control simulation on top of another network interface * hwsim configurability to test capabilities similar to real hardware * various mesh improvements * various radiotap vendor data fixes in mac80211 * finally the nl_set_extack_cookie_u64() we talked about previously, used for * peer measurement APIs, right now only with FTM (flight time measurement) for location * made nl80211 radio/interface announcements more complete * various new HE (802.11ax) things: updates, TWT support, ... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: ftm responder: remove pointless defensive codingJohannes Berg2018-12-181-2/+2
| | | | | | | | | | | | | | | | The pointer and corresponding length is always set in pairs in cfg80211, so no need to have this strange defensive check that also confuses static checkers. Clean it up. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * {nl,mac}80211: add dot11MeshConnectedToMeshGate to meshconfBob Copeland2018-11-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | When userspace is controlling mesh routing, it may have better knowledge about whether a mesh STA is connected to a mesh gate than the kernel mpath table. Add dot11MeshConnectedToMeshGate to the mesh config so that such applications can explicitly signal that a mesh STA is connected to a gate, which will then be advertised in the beacon. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: allow drivers to use peer measurement APIJohannes Berg2018-11-091-0/+22
| | | | | | | | | | | | | | | | There's nothing much for mac80211 to do, so only pass through the requests with minimal checks and tracing. The driver must call cfg80211's results APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: fix CSA beacon allocation sizeJohannes Berg2018-11-091-3/+4
|/ | | | | | | | | | | | | If the FTM responder settings are changed simultaneously with the CSA beacon, the buffer size allocated isn't sufficient and we'll have a heap overrun. Fix this. While at it, also clean up the ftm_responder assignment, doing it only if ftm_responder is non-zero is valid as it's 0 to start with, but not really useful to understand the code. Fixes: bc847970f432 ("mac80211: support FTM responder configuration/statistics") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu2018-10-121-0/+85
| | | | | | | | | | | | | New bss param ftm_responder is used to notify the driver to enable fine timing request (FTM) responder role in AP mode. Plumb the new cfg80211 API for FTM responder statistics through to the driver API in mac80211. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-10-061-1/+1
|\
| * mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keysFelix Fietkau2018-10-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | key->sta is only valid after ieee80211_key_link, which is called later in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is never set when management frame protection is enabled. Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: in AP mode, set bss_conf::he_supportedShaul Triebitz2018-09-051-0/+3
| | | | | | | | | | | | | | | | | | In AP mode, If AP advertises HE capabilities, set to true bss_conf::he_supported so that the Driver knows about it. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: remove pointless 'params' NULL checksJohannes Berg2018-09-051-4/+2
| | | | | | | | | | | | | | | | These checks aren't necessary, cfg80211 never passes NULL. Some static checkers complain about the missing checks on the next line, but really the NULL checks are unnecessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211/mac80211: make ieee80211_send_layer2_update a public functionDedy Lansky2018-08-281-46/+2
|/ | | | | | | | Make ieee80211_send_layer2_update() a common function so other drivers can re-use it. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: restrict delayed tailroom needed decrementManikanta Pubbisetty2018-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add support for HELuca Coelho2018-06-181-0/+5
| | | | | | | | | | | | | Add support for HE in mac80211 conforming with P802.11ax_D1.4. Johannes: Fix another bug with the buf_size comparison in agg-rx.c. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: support scan features for improved scan privacyJohannes Berg2018-06-151-1/+1
| | | | | | | | | | Support the new random SN and minimal probe request contents scan flags for the case of software scan - for hardware scan the drivers need to opt in, but may need to do only that, depending on their implementation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
* mac80211: allocate and fill tidstats only when neededJohannes Berg2018-05-181-2/+2
| | | | | | | | | This fixes memory leaks in the case where we just have the station info on the stack for internal usage without sending it to cfg80211. Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Support the new cfg80211 TXQ stats APIToke Høiland-Jørgensen2018-05-081-0/+99
| | | | | | | | This adds support to mac80211 to export TXQ stats via the newly added cfg80211 API. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Send control port frames over nl80211Denis Kenzior2018-03-291-0/+6
| | | | | | | | | | | | If userspace requested control port frames to go over 80211, then do so. The control packets are intercepted just prior to delivery of the packet to the underlying network device. Pre-authentication type frames (protocol: 0x88c7) are also forwarded over nl80211. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Add support for tx_control_portDenis Kenzior2018-03-291-0/+1
| | | | | Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: limit wmm params to comply with ETSI requirementsHaim Dreyfuss2018-03-291-0/+3
| | | | | | | | | | | | | | | | | | | ETSI has recently added new requirements that restrict the WMM parameter values for 5GHz frequencies. We need to take care of the following scenarios in order to comply with these new requirements: 1. When using mac80211 default values; 2. When the userspace tries to configure its own values; 3. When associating to an AP which advertises WWM IE. When associating to an AP, the client uses the values in the advertised WMM IE. But the AP may not comply with the new ETSI requirements, so the client needs to check the current regulatory rules and use those limits accordingly. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: notify driver for change in multicast ratesPradeep Kumar Chitrapu2018-03-231-0/+2
| | | | | | | | | | | | With drivers implementing rate control in driver or firmware rate_control_send_low() may not get called, and thus the driver needs to know about changes in the multicast rate. Add and use a new BSS change flag for this. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: support fast-rx with incompatible PS capabilities when PS is disabledFelix Fietkau2018-02-271-0/+1
| | | | | | | | When powersave is disabled for the interface, we can do fast-rx anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name> [fixed indentation on one line] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'mac80211-for-davem-2018-02-22' of ↵David S. Miller2018-02-221-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes across the tree, the shortlog basically says it all: cfg80211: fix cfg80211_beacon_dup -> old bug in this code cfg80211: clear wep keys after disconnection -> certain ways of disconnecting left the keys mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 -> alignment issues with using 14 bytes mac80211: Do not disconnect on invalid operating class -> if the AP has a bogus operating class, let it be mac80211: Fix sending ADDBA response for an ongoing session -> don't send the same frame twice cfg80211: use only 1Mbps for basic rates in mesh -> interop issue with old versions of our code mac80211_hwsim: don't use WQ_MEM_RECLAIM -> it causes splats because it flushes work on a non-reclaim WQ regulatory: add NUL to request alpha2 -> nla_put_string() issue from Kees mac80211: mesh: fix wrong mesh TTL offset calculation -> protocol issue mac80211: fix a possible leak of station stats -> error path might leak memory mac80211: fix calling sleeping function in atomic context -> percpu allocations need to be made with gfp flags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud