summaryrefslogtreecommitdiffstats
path: root/include/linux/phy.h
Commit message (Collapse)AuthorAgeFilesLines
* net: phy: add new version of phy_do_ioctlHeiner Kallweit2020-01-211-0/+1
| | | | | | | | | | | Add a new version of phy_do_ioctl that doesn't check whether net_device is running. It will typically be used if suitable drivers attach the PHY in probe already. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: rename phy_do_ioctl to phy_do_ioctl_runningHeiner Kallweit2020-01-211-1/+1
| | | | | | | | | | | We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: add generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit2020-01-201-0/+1
| | | | | | | | | A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Maintain MDIO device and bus statisticsFlorian Fainelli2020-01-171-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We maintain global statistics for an entire MDIO bus, as well as broken down, per MDIO bus address statistics. Given that it is possible for MDIO devices such as switches to access MDIO bus addresses for which there is not a mdio_device instance created (therefore not a a corresponding device directory in sysfs either), we also maintain per-address statistics under the statistics folder. The layout looks like this: /sys/class/mdio_bus/../statistics/ transfers errrors writes reads transfers_<addr> errors_<addr> writes_<addr> reads_<addr> When a mdio_device instance is registered, a statistics/ folder is created with the tranfers, errors, writes and reads attributes which point to the appropriate MDIO bus statistics structure. Statistics are 64-bit unsigned quantities and maintained through the u64_stats_sync.h helper functions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: add MACsec ops in phy_deviceAntoine Tenart2020-01-141-0/+7
| | | | | | | | | This patch adds a reference to MACsec ops in the phy_device, to allow PHYs to support offloading MACsec operations. The phydev lock will be held while calling those helpers. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: introduce the macsec_context structureAntoine Tenart2020-01-141-0/+2
| | | | | | | | | | | | This patch introduces the macsec_context structure. It will be used in the kernel to exchange information between the common MACsec implementation (macsec.c) and the MACsec hardware offloading implementations. This structure contains pointers to MACsec specific structures which contain the actual MACsec configuration, and to the underlying device (phydev for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Added IRQ print to phylink_bringup_phy()Florian Fainelli2020-01-141-0/+2
| | | | | | | | | | The information about the PHY attached to the PHYLINK instance is useful but is missing the IRQ prints that phy_attached_info() adds. phy_attached_info() is a bit long and it would not be possible to use phylink_info() anyway. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: add PHY_INTERFACE_MODE_10GBASERRussell King2020-01-051-4/+8
| | | | | | | | | | Recent discussion has revealed that the use of PHY_INTERFACE_MODE_10GKR is incorrect. Add a 10GBASE-R definition, document both the -R and -KR versions, and the fact that 10GKR was used incorrectly. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Introduce a new MII time stamping interface.Richard Cochran2019-12-251-31/+10
| | | | | | | | | | | | | | Currently the stack supports time stamping in PHY devices. However, there are newer, non-PHY devices that can snoop an MII bus and provide time stamps. In order to support such devices, this patch introduces a new interface to be used by both PHY and non-PHY devices. In addition, the one and only user of the old PHY time stamping API is converted to the new interface. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Introduce helper functions for time stamping support.Richard Cochran2019-12-251-0/+60
| | | | | | | | | | | | | | Some parts of the networking stack and at least one driver test fields within the 'struct phy_device' in order to query time stamping capabilities and to invoke time stamping methods. This patch adds a functional interface around the time stamping fields. This will allow insulating the callers from future changes to the details of the time stamping implemenation. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2019-12-221-1/+1
|\ | | | | | | | | | | Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: ensure that phy IDs are correctly typedRussell King2019-12-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | PHY IDs are 32-bit unsigned quantities. Ensure that they are always treated as such, and not passed around as "int"s. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: provide and use genphy_read_status_fixed()Russell King2019-12-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | There are two drivers and generic code which contain exactly the same code to read the status of a PHY operating without autonegotiation enabled. Rather than duplicate this code, provide a helper to read this information. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: add genphy_check_and_restart_aneg()Russell King2019-12-191-0/+1
|/ | | | | | | | | | Add a helper for restarting autonegotiation(), similar to the clause 45 variant. Use it in __genphy_config_aneg() Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: add helpers phy_(un)lock_mdio_busHeiner Kallweit2019-11-251-0/+10
| | | | | | | Add helpers to make locking/unlocking the MDIO bus easier. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: remove phy_ethtool_sset()Russell King2019-11-231-1/+0
| | | | | | | | | | | | | | | There are no users of phy_ethtool_sset() in the kernel anymore, and as of commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"), the implementation is slightly buggy - it doesn't correctly check the masked advertising mask as it used to. Remove it, and update the phy documentation to refer to its replacement function. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* net: phy: add core phylib sfp supportRussell King2019-11-181-0/+11
| | | | | | | | | | Add core phylib help for supporting SFP sockets on PHYs. This provides a mechanism to inform the SFP layer about PHY up/down events, and also unregister the SFP bus when the PHY is going away. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: add support for clause 37 auto-negotiationHeiner Kallweit2019-10-231-0/+4
| | | | | | | | | | This patch adds support for clause 37 1000Base-X auto-negotiation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Tao Ren <taoren@fb.com> Tested-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: extract pause modeRussell King2019-10-041-0/+1
| | | | | | | | | | | Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: extract link partner advertisement readingRussell King2019-10-041-0/+1
| | | | | | | | | | | Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2019-09-021-0/+1
|\ | | | | | | | | | | | | r8152 conflicts are the NAPI fixes in 'net' overlapping with some tasklet stuff in net-next Signed-off-by: David S. Miller <davem@davemloft.net>
| * Add genphy_c45_config_aneg() function to phy-c45.cMarco Hartmann2019-08-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg") introduced a check that aborts phy_config_aneg() if the phy is a C45 phy. This causes phy_state_machine() to call phy_error() so that the phy ends up in PHY_HALTED state. Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg() (analogous to the C22 case) so that the state machine can run correctly. genphy_c45_config_aneg() closely resembles mv3310_config_aneg() in drivers/net/phy/marvell10g.c, excluding vendor specific configurations for 1000BaseT. Fixes: 22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver") Signed-off-by: Marco Hartmann <marco.hartmann@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: remove genphy_config_initHeiner Kallweit2019-08-171-1/+0
| | | | | | | | | | | | | | Now that all users have been removed we can remove genphy_config_init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: let phy_speed_down/up support speeds >1GbpsHeiner Kallweit2019-08-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | So far phy_speed_down/up can be used up to 1Gbps only. Remove this restriction by using new helper __phy_speed_down. New member adv_old in struct phy_device is used by phy_speed_up to restore the advertised modes before calling phy_speed_down. Don't simply advertise what is supported because a user may have intentionally removed modes from advertisement. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* | net: phy: add phy_speed_down_core and phy_resolve_min_speedHeiner Kallweit2019-08-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | phy_speed_down_core provides most of the functionality for phy_speed_down. It makes use of new helper phy_resolve_min_speed that is based on the sorting of the settings[] array. In certain cases it may be helpful to be able to exclude legacy half duplex modes, therefore prepare phy_resolve_min_speed() for it. v2: - rename __phy_speed_down to phy_speed_down_core Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* | net: phy: add phy_modify_paged_changedHeiner Kallweit2019-08-111-0/+2
| | | | | | | | | | | | | | | | | | Add helper function phy_modify_paged_changed, behavios is the same as for phy_modify_changed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: prepare phylib to deal with PHY's extending Clause 22Heiner Kallweit2019-08-111-1/+7
|/ | | | | | | | | | | | | | | | | | | The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me) PHY that uses standard Clause 22 for all modes up to 1Gbps and adds 2.5Gbps control using vendor-specific registers. To use phylib for the standard part little extensions are needed: - Move most of genphy_config_aneg to a new function __genphy_config_aneg that takes a parameter whether restarting auto-negotiation is needed (depending on whether content of vendor-specific advertisement register changed). - Don't clear phydev->lp_advertising in genphy_read_status so that we can set non-C22 mode flags before. Basically both changes mimic the behavior of the equivalent Clause 45 functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: make exported variables non-staticDenis Efremov2019-07-121-0/+3
| | | | | | | | | | | | The variables phy_basic_ports_array, phy_fibre_port_array and phy_all_ports_features_array are declared static and marked EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the variables were decided to be a part of API, this commit removes the static attributes and adds the declarations to the header. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: enable clause 45 mdio supportKweh Hock Leong2019-07-081-0/+2
| | | | | | | | | | | | | | DWMAC4 is capable to support clause 45 mdio communication. This patch enable the feature on stmmac_mdio_write() and stmmac_mdio_read() by following phy_write_mmd() and phy_read_mmd() mdiobus read write implementation format. Reviewed-by: Li, Yifan <yifan2.li@intel.com> Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-06-071-6/+1
|\ | | | | | | | | | | | | Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
| * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | net: phy: remove state PHY_FORCINGHeiner Kallweit2019-06-051-11/+0
| | | | | | | | | | | | | | | | | | | | | | In the early days of phylib we had a functionality that changed to the next lower speed in fixed mode if no link was established after a certain period of time. This functionality has been removed years ago, and state PHY_FORCING isn't needed any longer. Instead we can go from UP to RUNNING or NOLINK directly (same as in autoneg mode). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: export phy_queue_state_machineHeiner Kallweit2019-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We face the issue that link change interrupt and link status may be reported by different PHY layers. As a result the link change interrupt may occur before the link status changes. Export phy_queue_state_machine to allow PHY drivers to specify a delay between link status change interrupt and link status check. v2: - change jiffies parameter type to unsigned long Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: add callback for custom interrupt handler to struct phy_driverHeiner Kallweit2019-05-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The phylib interrupt handler handles link change events only currently. However PHY drivers may want to use other interrupt sources too, e.g. to report temperature monitoring events. Therefore add a callback to struct phy_driver allowing PHY drivers to implement a custom interrupt handler. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Suggested-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: enable interrupts when PHY is attached alreadyHeiner Kallweit2019-05-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a step towards allowing PHY drivers to handle more interrupt sources than just link change. E.g. several PHY's have built-in temperature monitoring and can raise an interrupt if a temperature threshold is exceeded. We may be interested in such interrupts also if the phylib state machine isn't started. Therefore move enabling interrupts to phy_request_interrupt(). v2: - patch added to series Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: add interface mode PHY_INTERFACE_MODE_USXGMIIHeiner Kallweit2019-05-241-0/+3
|/ | | | | | | | Add support for interface mode PHY_INTERFACE_MODE_USXGMII. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: improve resuming from hibernationHeiner Kallweit2019-05-041-8/+1
| | | | | | | | | | | | | | | | I got an interesting report [0] that after resuming from hibernation the link has 100Mbps instead of 1Gbps. Reason is that another OS has been used whilst Linux was hibernated. And this OS speeds down the link due to WoL. Therefore, when resuming, we shouldn't expect that what the PHY advertises is what it did when hibernating. Easiest way to do this is removing state PHY_RESUMING. Instead always go via PHY_UP that configures PHY advertisement. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202851 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: improve pause handlingHeiner Kallweit2019-05-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: improve link partner capability detectionHeiner Kallweit2019-04-081-0/+2
| | | | | | | | | | | | | | | genphy_read_status() so far checks phydev->supported, not the actual PHY capabilities. This can make a difference if the supported speeds have been limited by of_set_phy_supported() or phy_set_max_speed(). It seems that this issue only affects the link partner advertisements as displayed by ethtool. Also this patch wouldn't apply to older kernels because linkmode bitmaps have been introduced recently. Therefore net-next. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: fix autoneg mismatch case in genphy_read_statusHeiner Kallweit2019-04-031-0/+1
| | | | | | | | | | | | | | | | The original patch didn't consider the case that autoneg process finishes successfully but both link partners have no mode in common. In this case there's no link, nevertheless we may be interested in what the link partner advertised. Like phydev->link we set phydev->autoneg_complete in genphy_update_link() and use the stored value in genphy_read_status(). This way we don't have to read register BMSR again. Fixes: b6163f194c69 ("net: phy: improve genphy_read_status") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: add genphy_read_abilitiesHeiner Kallweit2019-04-021-0/+1
| | | | | | | | | Similar to genphy_c45_pma_read_abilities() add a function to dynamically detect the abilities of a Clause 22 PHY. This is mainly copied from genphy_config_init(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: remove gen10g_no_soft_resetHeiner Kallweit2019-03-031-1/+0
| | | | | | | | | genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: don't export gen10g_read_statusHeiner Kallweit2019-03-031-1/+0
| | | | | | | | | gen10g_read_status is deprecated, therefore stop exporting it. We don't want to encourage anybody to use it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: remove gen10g_config_initHeiner Kallweit2019-03-031-1/+0
| | | | | | | | | | ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all users of gen10g_config_init use PHY_10GBIT_FEATURES. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: remove gen10g_suspend and gen10g_resumeHeiner Kallweit2019-03-031-2/+0
| | | | | | | | | phy_suspend() and phy_resume() are no-ops anyway if no callback is defined. Therefore we don't need these stubs. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-02-241-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: realtek: Dummy IRQ calls for RTL8366RBLinus Walleij2019-02-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression introduced by commit 0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7 "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: add genphy_c45_read_statusHeiner Kallweit2019-02-231-0/+1
| | | | | | | | | | | | | | | | Similar to genphy_read_status() for Clause 22 add a generic read_status function for Clause 45. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: add genphy_c45_check_and_restart_anegHeiner Kallweit2019-02-211-0/+1
| | | | | | | | | | | | | | | | This function will be used by config_aneg callback implementations of PHY drivers and allows to reduce boilerplate code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: export genphy_config_eee_advertHeiner Kallweit2019-02-211-0/+1
| | | | | | | | | | | | | | We want to use this function in phy-c45.c too, therefore export it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud