summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/max310x.c
Commit message (Expand)AuthorAgeFilesLines
* serial: max310x: Check the clock readinessJan Kundrát2018-06-281-4/+10
* gpio: serial: max310x: Use HW type for gpio_chip's labelJan Kundrát2018-02-281-1/+1
* gpio: serial: max310x: Support open-drain configuration for GPIOsJan Kundrát2018-01-091-0/+22
* serial: max310x: Reduce RX work starvationJan Kundrát2017-12-191-13/+10
* serial: max310x: Use batched reads when reasonably safeJan Kundrát2017-12-191-40/+86
* serial: max310x: use a batch write op for UART transmitJan Kundrát2017-12-191-7/+29
* serial: max310x: Support IRQ sharing with other devicesJan Kundrát2017-12-191-6/+14
* serial: max310x: Do not hard-code the IRQ typeJan Kundrát2017-12-191-5/+3
* serial: max310x: Fix invalid memory access during GPIO initJan Kundrát2017-12-151-17/+17
* tty: serial: Remove redundant license textGreg Kroah-Hartman2017-11-081-5/+0
* tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman2017-11-081-0/+1
* serial: max310x: Add support for newer silicon revisionsAlexander Shiyan2017-01-121-1/+1
* serial: max310x: Set IRQF_TRIGGER_FALLING flag when dev.of_node is not NULLLiu Xiang2016-09-151-1/+1
* serial: max310x: Assign port line automaticallyAlexander Shiyan2016-06-251-9/+32
* serial: max310x: Unregister UARTs on errorAlexander Shiyan2016-06-251-0/+3
* serial: max310x: Remove duplicate bits definitionAlexander Shiyan2016-06-251-9/+4
* serial: max310x: Register UART driver at module_initAlexander Shiyan2016-06-251-31/+48
* serial: max310x: Using resource-managed function for GPIOAlexander Shiyan2016-06-251-12/+5
* serial: max310x: Fix RS485 handlingAlexander Shiyan2016-06-251-14/+27
* serial: max310x: use gpiochip data pointerLinus Walleij2016-04-261-6/+6
* gpio: change member .dev to .parentLinus Walleij2015-11-191-1/+1
* spi: Drop owner assignment from spi_driversAndrew F. Davis2015-10-281-1/+0
* drivers/max310: Use the rs485 functions on serial_coreRicardo Ribalda Delgado2014-11-061-43/+27
* serial/max310x: Remove obsolete #ifset TIOC[SG]RS485Ricardo Ribalda Delgado2014-11-051-2/+0
* max310x: max3109_detect should use indirect addressing in SPI mode for REVID ...Gregory Hermant2014-11-051-1/+4
* driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe2014-09-181-6/+4
* serial: treewide: Remove empty implementations of enable_ms()Alexander Shiyan2014-07-091-1/+0
* serial: Fix IGNBRK handlingPeter Hurley2014-06-191-1/+1
* serial: max310x: Add missing #include <linux/uaccess.h>Geert Uytterhoeven2014-03-171-0/+1
* serial: max310x: Fix sparse warningsAlexander Shiyan2014-02-151-4/+2
* serial: max310x: Fix build errorAlexander Shiyan2014-02-131-4/+6
* Revert "serial: max310x: Fix build error"Greg Kroah-Hartman2014-02-131-2/+1
* serial: max310x: Fix build warningAlexander Shiyan2014-02-131-1/+1
* serial: max310x: Fix build errorAlexander Shiyan2014-02-131-1/+2
* serial: max310x: Add devicetree supportAlexander Shiyan2014-02-131-9/+32
* serial: max310x: Driver cleanupAlexander Shiyan2014-02-131-29/+5
* serial: max310x: Add support for RS-485 modeAlexander Shiyan2014-02-131-21/+56
* serial: max310x: Add missing mutex_destroy() on driver exitAlexander Shiyan2014-02-131-2/+5
* serial: max310x: Always use dynamic GPIO ID assignmentAlexander Shiyan2014-02-131-27/+28
* serial: max310x: Migrate to CLK APIAlexander Shiyan2014-02-131-31/+55
* serial: max310x: Move all SPI-dependent stuff in one placeAlexander Shiyan2014-02-131-32/+24
* serial: max310x: Remove IRQ validationAlexander Shiyan2014-02-131-6/+0
* serial: max310x: Add the loopback mode supportAlexander Shiyan2014-02-131-7/+18
* serial: max310x: Remove excess port configure at startupAlexander Shiyan2014-02-131-6/+0
* serial: max310x: Remove init() and exit() callbacksAlexander Shiyan2014-02-131-7/+0
* serial: max310x: Setup baud rate generator more preciselyAlexander Shiyan2014-02-131-12/+20
* tty: Remove unnecessary semicolonsJoe Perches2013-10-161-1/+1
* serial: max310x: Fix dev_pm_opsAlexander Shiyan2013-07-291-5/+4
* serial: max310x: Add MAX14830 supportAlexander Shiyan2013-07-261-1/+44
* serial: max310x: Add MAX3109 supportAlexander Shiyan2013-07-261-4/+31
OpenPOWER on IntegriCloud