summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_init.c
Commit message (Collapse)AuthorAgeFilesLines
* scsi: lpfc: Fix driver release of fw-logging buffersJames Smart2018-12-071-6/+5
| | | | | | | | | | | | | | | | | | | | | On driver termination, after the driver stops fw logging by writing a register on the chip, the driver immediately unmaps and frees the logging buffer, without confirming in any way that the chip has received the write and terminated the logging. As termination on the chip is not immediate, the chip may issue a dma request to the now unmapped dma buffer, resulting in a iommu fault. Change the driver to receive a confirmation that logging ahs been terminated. As the driver always issues an SLI reset with the device as part of shutdown, and as part of that is receiving confirmation that the reset is complete - the driver was modified to perform the write to disable fw logging prior to the SLI reset and only free the fw log buffer after the SLI reset is complete. That guarantees use of the fw log buffer is fully terminated when it is unmapped. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Cap NPIV vports to 256James Smart2018-12-071-0/+3
| | | | | | | | | | | | | Depending on the chipset, the number of NPIV vports may vary and be in excess of what most switches support (256). To avoid confusion with the users, limit the reported NPIV vports to 256. Additionally correct the 16G adapter which is reporting a bogus NPIV vport number if the link is down. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix kernel Oops due to null pring pointersJames Smart2018-12-071-1/+6
| | | | | | | | | | | | | | | Driver is hitting null pring pointers in lpfc_do_work(). Pointer assignment occurs based on SLI-revision. If recovering after an error, its possible the sli revision for the port was cleared, making the lpfc_phba_elsring() not return a ring pointer, thus the null pointer. Add SLI revision checking to lpfc_phba_elsring() and status checking to all callers. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: refactor mailbox structure context fieldsJames Smart2018-12-071-3/+3
| | | | | | | | | | | | | | | The driver data structure for managing a mailbox command contained two context fields. Unfortunately, the context were considered "generic" to be used at the whim of the command code. Of course, one section of code used fields this way, while another did it that way, and eventually there were mixups. Refactored the structure so that the generic contexts become a node context and a buffer context and all code standardizes on their use. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix panic when FW-log buffsize is not initializedJames Smart2018-12-071-1/+2
| | | | | | | | | | | | | | | | | | | | | While trying to get adapter fw-log for a function whose buffsize was set to 0, kernel panic occurred. When buffsize is 0, the kernel buffer for the log won't be allocated. When fw log usage was enabled, it failed to check the buffer size, and log usage was started. Eventually the driver referenced the unallocated log buffer. Added checks of the buffer size before allowing fw logging to be enabled and added check for valid buffer if enabling fw log. Performed a couple other minor cleanups while fixing this: - clarified log messages - re-evaluated log message severity - treat any error as an error, not only a couple codes Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: use dma_set_mask_and_coherentChristoph Hellwig2018-11-151-24/+10
| | | | | | | | The driver currently uses pci_set_dma_mask despite otherwise using the generic DMA API. Switch it over to the better generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: add Trunking supportJames Smart2018-11-061-0/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add trunking support to the driver. Trunking is found on more recent asics. In general, trunking appears as a single "port" to the driver and overall behavior doesn't differ. Link speed is reported as an aggregate value, while link speed control is done on a per-physical link basis with all links in the trunk symmetrical. Some commands returning port information are updated to additionally provide trunking information. And new ACQEs are generated to report physical link events relative to the trunk. This patch contains the following modifications: - Added link speed settings of 128GB and 256GB. - Added handling of trunk-related ACQEs, mainly logging and trapping of physical link statuses. - Added additional bsg interface to query trunk state by applications. - Augment link_state sysfs attribtute to display trunk link status Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: fcoe: Fix link down issue after 1000+ link bouncesJames Smart2018-11-061-1/+1
| | | | | | | | | | | | | | | | On FCoE adapters, when running link bounce test in a loop, initiator failed to login with switch switch and required driver reload to recover. Switch reached a point where all subsequent FLOGIs would be LS_RJT'd. Further testing showed the condition to be related to not performing FCF discovery between FLOGI's. Fix by monitoring FLOGI failures and once a repeated error is seen repeat FCF discovery. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix lpfc_sli4_read_config return value checkJames Smart2018-11-061-2/+2
| | | | | | | | | | | An error is an error - but not to the existing return value check. Revise check to handle any failure, not just EIO. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Correct speeds on SFP swapJames Smart2018-11-061-17/+46
| | | | | | | | | | | | | | | | | | | | | Supported speeds is not updated when SFP is removed or replaced Supported speed is obtained from lmt field in READ_CONFIG mailbox response. Driver updates supported speeds only once from PCI probe path. After that it is never updated. So, supported speeds remains the same till reboot or driver reload. When SFP is removed or inserted, driver gets SLI-Port Event ACQE. If SFP is removed, lmt wil have value 0. If a different SFP is inserted, lmt will have value according to its supported speeds. So, afterr SLI-Port Event ACQE handling path, send READ_CONFIG mailbox and update supported speeds. If READ_CONFIG fails, set supported speeds to unknown and log. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2018-10-251-20/+83
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380, qla2xxx, lpfc, libsas, hisi_sas. In addition there's a set of mostly small updates to the target subsystem a set of conversions to the generic DMA API, which do have some potential for issues in the older drivers but we'll handle those as case by case fixes. A new myrs driver for the DAC960/mylex raid controllers to replace the block based DAC960 which is also being removed by Jens in this merge window. Plus the usual slew of trivial changes" [ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even wonder. There's also a "myrb" driver, where the 'b' stands for 'block'. Truly, somebody has got mad naming skillz. - Linus ] * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits) scsi: myrs: Fix the processor absent message in processor_show() scsi: myrs: Fix a logical vs bitwise bug scsi: hisi_sas: Fix NULL pointer dereference scsi: myrs: fix build failure on 32 bit scsi: fnic: replace gross legacy tag hack with blk-mq hack scsi: mesh: switch to generic DMA API scsi: ips: switch to generic DMA API scsi: smartpqi: fully convert to the generic DMA API scsi: vmw_pscsi: switch to generic DMA API scsi: snic: switch to generic DMA API scsi: qla4xxx: fully convert to the generic DMA API scsi: qla2xxx: fully convert to the generic DMA API scsi: qla1280: switch to generic DMA API scsi: qedi: fully convert to the generic DMA API scsi: qedf: fully convert to the generic DMA API scsi: pm8001: switch to generic DMA API scsi: nsp32: switch to generic DMA API scsi: mvsas: fully convert to the generic DMA API scsi: mvumi: switch to generic DMA API scsi: mpt3sas: switch to generic DMA API ...
| * scsi: lpfc: fix spelling mistake "Resrouce" -> "Resource"Colin Ian King2018-10-161-1/+1
| | | | | | | | | | | | | | Trivial fix to spelling mistake in lpfc_printf_log message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: lpfc: add support to retrieve firmware logsJames Smart2018-09-111-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the ability to read firmware logs from the adapter. The driver registers a buffer with the adapter that is then written to by the adapter. The adapter posts CQEs to indicate content updates in the buffer. While the adapter is writing to the buffer in a circular fashion, an application will poll the driver to read the next amount of log data from the buffer. Driver log buffer size is configurable via the ras_fwlog_buffsize sysfs attribute. Verbosity to be used by firmware when logging to host memory is controlled through the ras_fwlog_level attribute. The ras_fwlog_func attribute enables or disables loggy by firmware. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: lpfc: Correct irq handling via locks when taking adapter offlineJames Smart2018-09-111-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When taking the board offline while performing i/o, unsafe locking errors occurred and irq level isn't properly managed. In lpfc_sli_hba_down, spin_lock_irqsave(&phba->hbalock, flags) does not disable softirqs raised from timer expiry. It is possible that a softirq is raised from the lpfc_els_retry_delay routine and recursively requests the same phba->hbalock spinlock causing deadlock. Address the deadlocks by creating a new port_list lock. The softirq behavior can then be managed a level deeper into the calling sequences. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: lpfc: raise sg count for nvme to use available sg resourcesJames Smart2018-09-111-11/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver allocates a sg list per io struture based on a fixed maximum size. When it registers with the protocol transports and indicates the max sg list size it supports, the driver manipulates the fixed value to report a lesser amount so that it has reserved space for sg elements that are used for DIF. The driver initialization path sets the cfg_sg_seg_cnt field to the manipulated value for scsi. NVME initialization ran afterward and capped it's maximum by the manipulated value for SCSI. This erroneously made NVME report the SCSI-reduce-for-DIF value that reduced the max io size for nvme and wasted sg elements. Rework the driver so that cfg_sg_seg_cnt becomes the overall maximum size and allow the max size to be tunable. A separate (new) scsi sg count is then setup with the scsi-modified reduced value. NVME then initializes based off the overall maximum. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep2018-10-021-8/+0
|/ | | | | | | | | | | | After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* scsi: lpfc: Support duration field in Link Cable Beacon V1 commandJames Smart2018-07-101-0/+1
| | | | | | | | | Current implementation missed setting the duration field. Correct the code to set the field. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Make PBDE optimizations configurableJames Smart2018-07-101-15/+7
| | | | | | | | | | | The PBDE optimizations aren't supported in all firmware revs. Make optimizations configurable in case there's a side effect on old firmware. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix abort error path for NVMETJames Smart2018-07-101-0/+5
| | | | | | | | | | | | | | | | | rmmod of driver hangs As driver instances were being unloaded, the NVME target port was unloaded first. During the unload, the NVME initiator port sent a heartbeat IO. Because of the target port state, that IO was scheduled for an Abort; however, that abort subsequently failed. The failure was not cleaned up properly and lpfc_sli4_xri_exchange_busy_wait silently hung forever. Clean failed abort properly and make lpfc_sli4_xri_exchange_busy_wait not hangs silently while waiting for aborts to complete. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* treewide: kzalloc() -> kcalloc()Kees Cook2018-06-121-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* scsi: lpfc: Fix port initialization failure.James Smart2018-05-281-3/+18
| | | | | | | | | | | | | | | | | | | | | The driver exits port setup after failing the lpfc_sli4_get_parameters command (messages 0356, 2541, & 1412). The older CNA adapters do not support the MBX command. In the past the code was allowed to fail and continue on with initialization. However a nvme change moved a closing bracket and now makes all failures terminal. Revise the logic so that terminal failure only occurs if the command failed on the newer adapters. Additionally, if parameters are set that require information from the command and the command failed, the parameters are erroneous and port set up should fail even on the older adapters. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix 16gb hbas failing cq create.James Smart2018-05-281-8/+1
| | | | | | | | | | | | | | | | The lancer G5 chip family fails the CQ create with 16k page size. The hardware incorrectly reports it supports large page sizes when it is actually limited to 4k pages. A prior patch resolved this for the A0 chip revision only. This patch excludes all revisions of the G5 asic from using large page sizes. As knowing the actual chip revision is unnecessary, the now unused definitions are removed Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: fix spelling mistakes: "mabilbox" and "maibox"Colin Ian King2018-05-081-2/+2
| | | | | | | | | | Trivial fix to spelling mistakes in lpfc_printf_log log message "mabilbox" -> "mailbox" "maibox" -> "mailbox" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Comment cleanup regarding Broadcom copyright headerJames Smart2018-05-081-1/+1
| | | | | | | | Fix small formatting and wording nits in Broadcom copyright header Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Driver NVME load fails when CPU cnt > WQ resource cntJames Smart2018-05-081-0/+34
| | | | | | | | | | | | | | If the cpu count is larger than the number of WQ resources available, adapter attachment eventually failes due to a WQ_CREATE failure. Calculate the number of WQs desired (which initializes to cpu count) after accounting for the number of queues the adapter supports and the number allocated to SCSI and the control/ELS path, and scale down if necessary. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Handle new link fault code returned by adapter firmware.James Smart2018-05-081-17/+14
| | | | | | | | | | | | | | | | | | The driver encounters a link event ACQE with a fault code it doesn't recognize, it logs an "Invalid" fault type and futher treats the unknown value as a mailbox command failure. First off, there is no "invalid" value, only values that are unknown. Secondly, the fault code doesn't indicate status - the rest of the ACQE contains that status so there is no reason to "fail the commands". Change the "Invalid" to "Unknown". There is no "invalid" code value. Separate fault code parsing and message genaration from any mbx handling status. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Correct fw download error messageJames Smart2018-05-081-1/+5
| | | | | | | | | | | | | | | In situations when the firmware image in inappropriate for the chip type, initial validation checks were light, allowing the checks to pass, thus allowing the firmware to be downloaded. Eventually, after the download, the chip rejects the firmware but it is logged as a generic firmware download error. Revise the initial checks to validate the image vs asic type so that the correct message is displayed and the download process is avoided. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix WQ/CQ creation for older asic's.James Smart2018-04-181-0/+15
| | | | | | | | | | | | | | | | The patch to enlarge WQ/CQ creation keys off of an adapter response that indicates support for the larger values. Older adapters return an incorrect response and are limited in size. Thus the adapters fail the WQ creation steps. Augment the WQ sizing checks with a check on the older adapter types and limit them to the restricted sizes. Fixes: c176ffa0841c ("scsi: lpfc: Increase CQ and WQ sizes for SCSI") Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix lingering lpfc_wq resource after driver unloadJames Smart2018-04-181-3/+8
| | | | | | | | | | | | | | After driver unloads, lpfc_wq remains active. The destroy_workqueue calls were not being made in driver unload. Additionally, SLI3 is allocating lpfc_wq resources, but never uses it. Make the destroy_workqueue calls on driver unload. Modify the SLI3 code path no longer allocate lpfc_wq resources. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Add per io channel NVME IO statisticsJames Smart2018-04-181-14/+22
| | | | | | | | | | | | | When debugging various issues, per IO channel IO statistics were useful to understand what was happening. However, many of the stats were on a port basis rather than an io channel basis. Move statistics to an io channel basis. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Memory allocation error during driver start-up on power8James Smart2018-03-121-1/+1
| | | | | | | | | | | | | | | | | | The driver fails to allocate command buffers in the routine lpfc_new_scsi_buf_s4 There is an inconsistency between lpfc_mem_alloc(), where the phba->lpfc_sg_dma_buf_pool is created, and lpfc_new_scsi_buf_s4(), when we allocate a buffer from the pool and check the alignment. The alignment should be on a page boundary, based on LPFC_SLI3_BG_ENABLED in sli3_options, for both cases. Fix by explicitly tracking sli4 vs sli3 and BG options. The result is that phba->cfg_sg_dma_buf_size is now set correctly for SLI-4. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Streamline NVME Targe6t WQE setupJames Smart2018-03-121-0/+1
| | | | | | | | | | | | | | To reduce latency when initializing WQE content, created templates for the most common wqes. This reduces the number of operations taken to set the content. It's not a lot of speed up, but every bit helps. This patch updates the NVME target path. [mkp: fixed typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Streamline NVME Initiator WQE setupJames Smart2018-03-121-0/+1
| | | | | | | | | | | | | | To reduce latency when initializing WQE content, create templates for the most common wqes. This reduces the number of operations taken to set the content. It's not a lot of speed up, but every bit helps. This patch updates the NVME initiator path. [mkp: fixed typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Work around NVME cmd iu SGL typeJames Smart2018-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | The hardware offload for NVME commands was created when the FC-NVME standard was setting SGL Descriptor Type to SGL Data Block Descriptor (0h) and SGL Descriptor Sub Type to Address (0h). A late change in NVMe-over-Fabrics obsoleted these values, creating a transport SGL descriptor type with new values to go into these fields. For initial hardware support, in order to be compliant to the spec, use host-supplied cmd IU buffers instead of the adapter generated values. Later hardware will correct this. Add a module parameter to override this offload disablement if looking for lowest latency. This is reasonable as nothing in FC-NVME uses the SQE SGL values. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Add embedded data pointers for enhanced performanceJames Smart2018-02-221-0/+20
| | | | | | | | | | | | | | The current driver isn't taking advantage of a performance hint whereby the initial data buffer descriptor can be placed in the WQE as well as the SGL. Add the logic to detect support for the feature and to use it when supported. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Enable fw download on if_type=6 devicesJames Smart2018-02-221-13/+31
| | | | | | | | | | | | | | Current code is very explicit in what it allows to be downloaded. The driver checking prevented G7 firmware download. The driver checking is unnecessary as the device will validate what it receives. Revise the firmware download interface checking. Added a little debug support in case there is still a failure. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Add if_type=6 support for cycling valid bitsJames Smart2018-02-221-0/+11
| | | | | | | | | | | | | | | | Traditional SLI4 required the driver to clear Valid bits on EQEs and CQEs after consuming them. The new if_type=6 hardware will cycle the value for what is valid on each queue itteration. The driver no longer has to touch the valid bits. This also means all the cpu cache dirtying and perhaps flush/refill's done by the hardware in accessing the EQ/CQ elements is eliminated. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Add 64G link speed supportJames Smart2018-02-221-2/+15
| | | | | | | | | | | | The G7 adapter supports 64G link speeds. Add support to the driver. In addition, a small cleanup to replace the odd bitmap logic with a switch case. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Add PCI Ids for if_type=6 hardwareJames Smart2018-02-221-0/+3
| | | | | | | | | Add PCI ids for the new G7 adapter Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Add push-to-adapter support to sli4James Smart2018-02-221-0/+18
| | | | | | | | | | | | | | | | | | | | | | | New if_type=6 adapters support an additional BAR that provides apertures to allow direct WQE to adapter push support - termed Direct Packet Push (DPP). WQ creation differs slightly to ask for a WQ to be DPP-ized. When submitting a WQE to a DPP WQ, it is submitted to the host memory for the WQ normally, but is also written by the host cpu directly to a BAR aperture. Write buffer coalescing in hardware is (hopefully) turned on, enabling single pci write operation support. The doorbell is thing rung to indicate the WQE is available and was pushed to the aperture. This patch: - Updates the WQ Create commands for the DPP options - Adds the bar mapping for if_type=6 DPP bar - Adds the WQE pushing to the DDP aperture received from WQ create - Adds a new module parameter to disable DPP operation if desired. Default is enabled. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Add SLI-4 if_type=6 support to the code baseJames Smart2018-02-221-19/+101
| | | | | | | | | | | | | | | | New hardware supports a SLI-4 interface, but with a new if_type variant of 6. If_type=6 has a different PCI BAR map, separate EQ/CQ doorbells, and some changes in doorbell formats. Add the changes for the if_type into headers, adapter initialization and control flows. Add new eq and cq handlers. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Rework sli4 doorbell infrastructureJames Smart2018-02-221-3/+6
| | | | | | | | | | | | | | Up until now, all SLI-4 devices had the same doorbells at the same bar locations. With newer hardware, there are now independent EQ and CQ doorbells and the bar locations differ. Prepare the code for new hardware by separating the eq/cq doorbell into separate components. The components can be set based on if_type. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Rework lpfc to allow different sli4 cq and eq handlersJames Smart2018-02-221-0/+7
| | | | | | | | | | | | | | Up until now, an SLI-4 device had no variance in the way it handled its EQs and CQs. With newer hardware, there are now differences in doorbells and some differences in how entries are valid. Prepare the code for new hardware by creating a sli4-based callout table that can be set based on if_type. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Update 11.4.0.7 modified files for 2018 CopyrightJames Smart2018-02-121-1/+1
| | | | | | | | Updated Copyright in files updated 11.4.0.7 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Validate adapter support for SRIU optionJames Smart2018-02-121-1/+12
| | | | | | | | | | | When using the special option to suppress the response iu, ensure the adapter fully supports the feature by checking feature flags from the adapter and validating the support when formatting the WQE. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix SCSI io host reset causing kernel crashJames Smart2018-02-121-0/+4
| | | | | | | | | | | | | | During SCSI error handling escalation to host reset, the SCSI io routines were moved off the txcmplq, but the individual io's ON_CMPLQ flag wasn't cleared. Thus, a background thread saw the io and attempted to access it as if on the txcmplq. Clear the flag upon removal. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: move placement of target destroy on driver detachJames Smart2018-02-121-7/+7
| | | | | | | | | | | Ensure nvme localports/targetports are torn down before dismantling the adapter sli interface on driver detachment. This aids leaving interfaces live while nvme may be making callbacks to abort it. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Increase CQ and WQ sizes for SCSIJames Smart2018-02-121-11/+25
| | | | | | | | | Increased CQ and WQ sizes for SCSI FCP, matching those used for NVMe development. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Increase SCSI CQ and WQ sizes.James Smart2017-12-201-22/+43
| | | | | | | | | | | | Increased the sizes of the SCSI WQ's and CQ's so that SCSI operation is similar to that used by NVME. However, size increase restricted only to those newer adapters that can support the larger WQE size, thus bigger queue sizes. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Fix random heartbeat timeouts during heavy IOJames Smart2017-12-201-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | NVME targets appear to randomly disconnect from the initiator when running heavy IO. The error is due to the host aggregate (across all controllers) io load was beyond the maximum exchange count for nvme on the adapter. The driver was properly returning a resource busy status, but the io load was so great heartbeat commands would be bounced and not have a successful retry within the fuzz amount for the nvme heartbeat (yes, a very high io load!). Thus the target was terminating the controller due to a keep alive failure. Resolve by reserving a few exchanges (by counters) which can be used when the adapter is out of normal exchanges and the command is a NVME heartbeat command. As counters are used, while the reserved command is outstanding, as soon as any other exchange completes, the counters are adjusted and the reserved count is replenished. The heartbeat completes execution in a normal fashion. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
OpenPOWER on IntegriCloud