summaryrefslogtreecommitdiffstats
path: root/drivers/clk/zynqmp
Commit message (Collapse)AuthorAgeFilesLines
* clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flagTejas Patel2020-01-231-5/+31
| | | | | | | | | | | | | | | Existing clock divider functions is not checking for base of divider. So, if any clock divider is power of 2 then clock rate calculation will be wrong. Add support to calculate divider value for the clocks with CLK_DIVIDER_POWER_OF_TWO flag. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-7-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: zynqmp: Fix divider calculationRajan Vaja2020-01-231-0/+46
| | | | | | | | | | | | | | | | | | zynqmp_clk_divider_round_rate() returns actual divider value after calculating from parent rate and desired rate, even though that rate is not supported by single divider of hardware. It is also possible that such divisor value can be achieved through 2 different dividers. As, Linux tries to set such divisor value(out of range) in single divider set divider is getting failed. Fix the same by computing best possible combination of two divisors which provides more accurate clock rate. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-6-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: zynqmp: Add support for get max dividerRajan Vaja2020-01-231-0/+36
| | | | | | | | | | | | | To achieve best possible rate, maximum limit of divider is required while computation. Get maximum supported divisor from firmware. To maintain backward compatibility assign maximum possible value(0xFFFF) if query for max divisor is not successful. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-5-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Remove else return and just return] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: zynqmp: Warn user if clock user are more than allowedRajan Vaja2020-01-231-2/+4
| | | | | | | | | | | | | | | | Warn user if clock is used by more than allowed devices. This check is done by firmware and returns respective error code. Upon receiving error code for excessive user, warn user for the same. This change is done to restrict VPLL use count. It is assumed that VPLL is used by one user only. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-4-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: zynqmp: Extend driver for versalRajan Vaja2020-01-231-1/+2
| | | | | | | | | | | Add Versal compatible string to support Versal binding. Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-3-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2019-05-161-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
| * drivers: Defer probe if firmware is not readyRajan Vaja2019-03-181-2/+2
| | | | | | | | | | | | | | | | | | | | Driver needs ZynqMP firmware interface to call EEMI APIs. In case firmware is not ready, dependent drivers should wait until the firmware is ready. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | clk: zynqmp: use structs for clk query responsesMichael Tretter2019-04-192-77/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver retrieves the clock tree by querying the ATF for the clock names, the clock topology, the parents and other attributes. The driver needs to unmarshal the responses. The definition of the fields in the firmware responses to the queries is inconsistent. Some are specified as a mask, some as a shift, and by the length of the previous field. Define C structs for the entire firmware responses to avoid passing pointers to arrays of an implicit size and make the format of the responses to the queries obvious. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Jolly Shah <jolly.shah@xilinx.com> [sboyd@kernel.org: Drop 0 initializers because sparse complains] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | clk: zynqmp: fix check for fractional clockMichael Tretter2019-04-111-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware sets BIT(13) in clkflag to mark a divider as fractional divider. The clock driver copies the clkflag straight to the flags of the common clock framework. In the common clk framework flags, BIT(13) is defined as CLK_DUTY_CYCLE_PARENT. Add a new field to the zynqmp_clk_divider to specify if a divider is a fractional devider. Set this field based on the clkflag when registering a divider. At the same time, unset BIT(13) from clkflag when copying the flags to the common clk framework flags. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | clk: zynqmp: do not export zynqmp_clk_register_* functionsMichael Tretter2019-04-112-2/+0
| | | | | | | | | | | | | | | | | | | | | | The zynqmp_clk_register_* functions are internal functions of the driver. Only clkc.c uses these functions to register these clocks. Therefore, there is no need to export these functions. The gate and pll already don't export their register_* functions. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | clk: zynqmp: fix kerneldoc of __zynqmp_clock_get_parentsMichael Tretter2019-04-111-1/+1
| | | | | | | | | | | | | | | | | | The kerneldoc refers to __zynqmp_clock_get_topology(), but actually documents __zynqmp_clock_get_parents(). Refer to the correct function name in the kerneldoc. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | drivers: clk: Update clock driver to handle clock attributeRajan Vaja2019-04-111-13/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Versal EEMI APIs uses clock device ID which is combination of class, subclass, type and clock index (e.g. 0x8104006 in which 0-13 bits are for index(6 in given example), 14-19 bits are for clock type (i.e pll, out or ref, 1 in given example), 20-25 bits are for subclass which is nothing but clock type only), 26-32 bits are for device class, which is clock(0x2) for all clocks) while zynqmp firmware uses clock ID which is index only (e.g 0, 1, to n, where n is max_clock id). To use zynqmp clock driver for versal platform also, extend use of QueryAttribute API to fetch device class, subclass and clock type to create clock device ID. In case of zynqmp this attributes would be 0 only, so there won't be any effect on clock id as it would use clock index only. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | drivers: clk: zynqmp: Allow zero divisor valueRajan Vaja2019-04-111-0/+7
|/ | | | | | | | | | Zero divider is valid and default for some of ZynqMP clocks. Allow zero divisor when CLK_DIVIDER_ALLOW_ZERO for the clock is set. Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: zynqmp: Fix memory allocation in zynqmp_clk_setupGustavo A. R. Silva2019-01-091-2/+2
| | | | | | | | | | | | | | Fix memory allocation and use struct_size() in kzalloc(). This also fixes the allocation size to be correct, and smaller, because before we were allocating a bunch of sizeof(struct clk_hw_onecell_data) structures for each struct clk_hw we needed. Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Expand commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: zynqmp: Off by one in zynqmp_is_valid_clock()Dan Carpenter2018-12-031-1/+1
| | | | | | | | | | | | The > comparison should be >= to prevent reading beyond the end of the clock[] array. (The clock[] array is allocated in zynqmp_clk_setup() and has clock_max_idx elements.) Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: zynqmp: handle fixed factor param query errorRajan Vaja2018-11-141-0/+3
| | | | | | | | | | Return proper error code in case query for fixed factor parameter fails. This also fixes build warning for set but not used variable 'ret'. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* drivers: clk: Add ZynqMP clock driverJolly Shah2018-10-098-0/+1635
This patch adds CCF compliant clock driver for ZynqMP. Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Tejas Patel <tejasp@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
OpenPOWER on IntegriCloud