summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/testing/sysfs-bus-usb
Commit message (Collapse)AuthorAgeFilesLines
* usb: Change "wired" to "hardwired" for connect_typeJon Flatley2019-02-041-1/+1
| | | | | | | | | | | | The sysfs documentation for /sys/bus/usb/.../portX/connect_type has one of the possible values listed as "wired" when the actual value should be "hardwired". Changes the ABI documentation for connect_type to match the strings in port.c. Signed-off-by: Jon Flatley <jflat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: export firmware port location in sysfsBjørn Mork2018-10-021-0/+10
| | | | | | | | | | | | | The platform firmware "location" data is used to find port peer relationships. But firmware is an unreliable source, and there are real world examples of errors leading to missing or wrong peer relationships. Debugging this is currently hard. Exporting the location attribute makes it easier to spot mismatches between the firmware data and the real world. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: added uevent for over-currentJon Flatley2018-09-281-1/+8
| | | | | | | | | | | | | | | | After commit 1cbd53c8cd85 ("usb: core: introduce per-port over-current counters") usb ports expose a sysfs value 'over_current_count' to user space. This value on its own is not very useful as it requires manual polling. As a solution, fire a udev event from the usb hub device that specifies the values 'OVER_CURRENT_PORT' and 'OVER_CURRENT_COUNT' that indicate the path of the usb port where the over-current event occurred and the value of 'over_current_count' in sysfs. Additionally, call sysfs_notify() so the sysfs value supports poll(). Signed-off-by: Jon Flatley <jflat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hub: Per-port setting to reduce TRSTRCY to 10 msNicolas Boichat2018-05-311-0/+4
| | | | | | | | | | | | | Currently, the USB hub core waits for 50 ms after enumerating the device. This was added to help "some high speed devices" to enumerate (b789696af8 "[PATCH] USB: relax usbcore reset timings"). On some devices, the time-to-active is important, so we provide a per-port option to reduce the time to what the USB specification requires: 10 ms. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hub: Per-port setting to use old enumeration schemeNicolas Boichat2018-05-311-0/+18
| | | | | | | | | | | | | | | | | | | The "old" enumeration scheme is considerably faster (it takes ~244ms instead of ~356ms to get the descriptor). It is currently only possible to use the old scheme globally (/sys/module/usbcore/parameters/old_scheme_first), which is not desirable as the new scheme was introduced to increase compatibility with more devices. However, in our case, we care about time-to-active for a specific USB device (which we make the firmware for), on a specific port (that is pogo-pin based: not a standard USB port). This new sysfs option makes it possible to use the old scheme on a single port only. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation sysfs-bus-usb: Add rx_lanes and tx_lanes introduced in USB 3.2Mathias Nyman2018-04-221-0/+18
| | | | | | | | | | | | | | rx_lanes and tx_lanes sysfs entries show the number of lanes in use by a device. USB 3.2 adds support for Dual-lane (symmetrical), using 2 rx lanes and 2 tx lanes for normal non Inter-Chip SSIC devices. USB 3.1 and older are all single lane. SSIC devices can have up to 4 lanes per direction in use, with different number of rx and tx lanes. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: introduce per-port over-current countersRichard Leitner2018-03-221-0/+10
| | | | | | | | | | | | | | | | | | | | For some userspace applications information on the number of over-current conditions at specific USB hub ports is relevant. In our case we have a series of USB hardware (using the cp210x driver) which communicates using a proprietary protocol. These devices sometimes trigger an over-current situation on some hubs. In case of such an over-current situation the USB devices offer an interface for reducing the max used power. As these conditions are quite rare and imply performance reductions of the device we don't want to reduce the max power always. Therefore give user-space applications the possibility to react adequately by introducing an over_current_counter in the usb port struct which is exported via sysfs. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: lpm: add sysfs node for usb3 lpm permitLu Baolu2015-12-011-0/+11
| | | | | | | | | | | | | | | | | | | | USB3 LPM is default on in Linux kernel if both xHCI host controller and the USB devices declare to be LPM-capable. Unfortunately, some devices are known to work well with LPM disabled, but to be broken if LPM is enabled, although it declares the LPM capability. Users won't be able to use this kind of devices, until someone puts them in the kernel blacklist and gets the kernel upgraded. This patch adds a sysfs node to permit or forbit USB3 LPM U1 or U2 entry for a port. The settings apply to both before and after device enumeration. Supported values are "0" - neither u1 nor u2 permitted, "u1" - only u1 is permitted, "u2" - only u2 is permitted, "u1_u2" - both u1 and u2 are permitted. With this interface, users can use an LPM-unfriendly USB device on a released Linux kernel. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: lpm: fix usb3_hardware_lpm sysfs nodeLu Baolu2015-12-011-7/+9
| | | | | | | | | | | | | | | | | | Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: interface authorization: Documentation partStefan Koch2015-09-221-0/+20
| | | | | | | This part adds the documentation for the interface authorization. Signed-off-by: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: interface authorization: Documentation part"Greg Kroah-Hartman2015-08-181-22/+0
| | | | | | | | This reverts commit 6ef2bf71764708f7c58ee9300acd8df05dbaa06f as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: interface authorization: Documentation partStefan Koch2015-08-141-0/+22
| | | | | | | This part adds the documentation for the interface authorization. Signed-off-by: Stefan Koch <skoch@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation: sysfs-bus-usb: s/CONFIG_PM_RUNTIME/CONFIG_PM/Valentin Rothberg2015-08-031-6/+6
| | | | | | | | | PM_RUNTIME has been replaced with PM by commit 464ed18ebdb6 ("PM: Eliminate CONFIG_PM_RUNTIME") hence substitute the reference on PM_RUNTIME with PM and re-arrange the text to 80 column break. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbcore: add sysfs support to xHCI usb3 hardware LPMKevin Strasser2015-07-221-0/+14
| | | | | | | | Add a sysfs node to make it easier to verify if LPM is supported and being enabled for USB 3.0 devices. Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB / PM: Drop CONFIG_PM_RUNTIME from the USB coreRafael J. Wysocki2014-12-041-10/+9
| | | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: allow a reference device for new_idWolfram Sang2014-01-101-2/+8
| | | | | | | | | Often, usb drivers need some driver_info to get a device to work. To have access to driver_info when using new_id, allow to pass a reference vendor:product tuple from which new_id will inherit driver_info. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation sysfs-bus-usb: Move files with known users to stableHans de Goede2013-08-301-127/+0
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation sysfs-bus-usb: Document all files used by libusbHans de Goede2013-08-141-0/+38
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation sysfs-bus-usb: Correct use of devnumHans de Goede2013-08-121-1/+1
| | | | | | | | | Correct use of devnum in supports_autosuspend documentation, the sysfs path contains busnum-port.port.port not busnum-devnum (which is the usb bus device address). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: add usb2 Link PM variables to sysfs and usb_deviceMathias Nyman2013-06-051-0/+27
| | | | | | | | | | | Adds abitilty to tune L1 timeout (inactivity timer for usb2 link sleep) and BESL (best effort service latency)via sysfs. This also adds a new usb2_lpm_parameters structure with those variables to struct usb_device. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* USB: remove CONFIG_USB_SUSPEND from DocumentationAlan Stern2013-03-281-3/+3
| | | | | | | | | An earlier patch removed the CONFIG_USB_SUSPEND symbol but forgot to update the Documentation files. This patch (as1676) rectifies that omission. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Add "portX/connect_type" attribute to expose usb port's connect typeLan Tianyu2013-01-201-0/+9
| | | | | | | | | | Some platforms provide usb port connect types through ACPI. This patch is to add this new attribute to expose these information to user space. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb : Add sysfs files to control port power."Greg Kroah-Hartman2012-09-241-24/+0
| | | | | | | | | | | | | This reverts commit ca9c9d0c922e4f1dac80699ebab1269d6dbaff85. Rafael wants more time to work on the user api to handle port power issues, so let's just revert the sysfs changes for now. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Lan Tianyu <tianyu.lan@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb : Add sysfs files to control port power.Lan Tianyu2012-09-101-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds two sysfs files for each usb hub port to allow userspace to control the port power policy. For an upcoming Intel xHCI roothub, this will translate into ACPI calls to completely power off or power on the port. As a reminder, when these ports are completely powered off, the USB host and device will see a physical disconnect. All future USB device connections will be lost, and the device will not be able to signal a remote wakeup. The control sysfs file can be written to with two options: "on" - port power must be on. "off" - port must be off. The state sysfs file reports usb port's power state: "on" - powered on "off" - powered off "error" - can't get power state For now, let userspace dictate the port power off policy. Future patches may add an in-kernel policy. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: make usb port a real deviceLan Tianyu2012-09-101-0/+7
| | | | | | | | | | | | | | | | | | This patch turns each USB port on a hub into a new struct device. This new device has the USB hub interface device as its parent. The port devices are stored in a new structure (usb_port), and an array of usb_ports are dynamically allocated once we know how many ports the USB hub has. Move the port_owner variable out of usb_hub and into this new structure. A new file will be created in the hub interface sysfs directory, so add documentation. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add a sysfs file to show LTM capabilities.Sarah Sharp2012-07-111-0/+12
| | | | | | | | | USB 3.0 devices can optionally support Latency Tolerance Messaging (LTM). Add a new sysfs file in the device directory to show whether a device is LTM capable. This file will be present for both USB 2.0 and USB 3.0 devices. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-05-221-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
| * Documentation: Fix typo in multiple files in DocumentationMasanari Iida2012-04-161-2/+2
| | | | | | | | | | | | | | | | | | Correct multiple spelling typo in Documentation. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Rob Landley <rob@landley.net> Reported-by: Anders Larsen <al@alarsen.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | USB: let both new_id and remove_id show dynamic id listBjørn Mork2012-05-141-0/+15
|/ | | | | | | | This enables the current list of dynamic IDs to be read out through either new_id or remove_id. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Add support for indicating whether a port is removableMatthew Garrett2012-02-091-0/+11
| | | | | | | | | | Userspace may want to make policy decisions based on whether or not a given USB device is removable. Add a per-device member and support for exposing it in sysfs. Information sources to populate it will be added later. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Add optional match for interface class to dynamic ID facilityJosua Dietze2011-11-151-0/+25
| | | | | | | | | | | | | | | | When adding the ID of a composite device dynamically to a driver, all hitherto unbound interfaces are bound to this driver regardless of their class, which may not be intended. The patch adds the option to tell the targeted interface class to a driver via the "new_id" attribute, in addition to the device ID. Also, it appends the ABI documentation accordingly. Example: $ echo "1234 2a2a ff" >/sys/bus/usb-serial/drivers/option1/new_id will bind only vendor-specific interfaces to the 3G driver. Signed-off-by: Josua Dietze <digidietze@draisberghof.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usbcore: add sysfs support to xHCI usb2 hardware LPMAndiry Xu2011-09-261-0/+15
| | | | | | | | | This patch adds sysfs support to xHCI usb2 hardware LPM, so developer can enable and disable usb2 hardware LPM manually for test purpose. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: deprecate the power/level sysfs attributeAlan Stern2010-05-201-28/+0
| | | | | | | | | | | | | This patch (as1367) deprecates USB's power/level sysfs attribute in favor of the power/control attribute provided by the runtime PM core. The two attributes do the same thing. It would be nice to replace power/level with a symlink to power/control, but at the moment sysfs doesn't offer any way to do so. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix documentation for avoid_reset_quirkOliver Neukum2010-03-191-1/+1
| | | | | | | | The name used in the documentation doesn't match reality. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Export QUIRK_RESET_MORPHS through sysfsOliver Neukum2010-03-021-0/+11
| | | | | | | | | | | Some devices which use mode switching revert to their primary mode as they are reset. They must not be reset for error handling. As user spaces makes the switch it also has to tell the kernel that a device is quirky. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: power management documentation updateAlan Stern2009-12-231-8/+10
| | | | | | | | | | This patch (as1313) updates the documentation concerning USB power management. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add remove_id sysfs attr for usb driversCHENG Renquan2009-12-111-0/+13
| | | | | | | | | | | | | | Accroding commit 0994375e, which is adding remove_id sysfs attr for pci drivers, for management tools dynamically bind/unbind a pci/usb devices to a specified drivers; with this patch, the management tools can be simplied. And the original code didn't handle the failure of usb_create_newid_file, fixed in this patch. Signed-off-by: CHENG Renquan <rqcheng@smu.edu.sg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'master' into for-upstreamDavid Vrabel2008-10-201-0/+16
|\ | | | | | | | | | | | | Conflicts: Documentation/ABI/testing/sysfs-bus-usb drivers/Makefile
| * USB: Export if an interface driver supports autosuspend.Sarah Sharp2008-10-171-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new sysfs file per interface named supports_autosuspend. This file returns true if an interface driver's .supports_autosuspend flag is set. It also returns true if the interface is unclaimed (since the USB core will autosuspend a device if an interface is not claimed). This new sysfs file will be useful for user space scripts to test whether a USB device correctly auto-suspends. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | uwb: document UWB and WUSB sysfs filesDavid Vrabel2008-09-171-0/+43
|/ | | | | | Add some brief documentation on the UWB and WUSB related sysfs files. Signed-off-by: David Vrabel <david.vrabel@csr.com>
* USB: Add documentation for USB suspend statistics.Sarah Sharp2008-02-011-0/+33
| | | | | | | | | | | | | This documents two newly created files: /sys/bus/usb/device/.../power/connected_duration /sys/bus/usb/device/.../power/active_duration Documentation was placed in Documentation/ABI/testing, since that's where the documentation is for the other USB sysfs power files. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add power/persist device attributeAlan Stern2007-07-121-0/+13
| | | | | | | | | | | | | | | | | | | | | This patch (as920) adds an extra level of protection to the USB-Persist facility. Now it will apply by default only to hubs; for all other devices the user must enable it explicitly by setting the power/persist device attribute. The disconnect_all_children() routine in hub.c has been removed and its code placed inline. This is the way it was originally as part of hub_pre_reset(); the revised usage in hub_reset_resume() is sufficiently different that the code can no longer be shared. Likewise, mark_children_for_reset() is now inline as part of hub_reset_resume(). The end result looks much cleaner than before. The sysfs interface is updated to add the new attribute file, and there are corresponding documentation updates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add power/level sysfs attributeAlan Stern2007-04-271-0/+26
| | | | | | | | | | | This patch (as874) adds another piece to the user-visible part of the USB autosuspend interface. The new power/level sysfs attribute allows users to force the device on (with autosuspend off), force the device to sleep (with autoresume off), or return to normal automatic operation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Allow autosuspend delay to equal 0Alan Stern2007-04-271-0/+15
This patch (as867) adds an entry for the new power/autosuspend attribute in Documentation/ABI/testing, and it changes the behavior of the delay value. Now a delay of 0 means to autosuspend as soon as possible, and negative values will prevent autosuspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud