diff options
Diffstat (limited to 'sound/soc/imx/imx-ssi.c')
| -rw-r--r-- | sound/soc/imx/imx-ssi.c | 13 |
1 files changed, 10 insertions, 3 deletions
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c index 80b4fee2442b..a11daa1e905b 100644 --- a/sound/soc/imx/imx-ssi.c +++ b/sound/soc/imx/imx-ssi.c @@ -23,7 +23,7 @@ * between pcm data and GPIO status data changes. Our FIQ handler is not * able to handle this, hence this driver only works with 48000Hz sampling * rate. - * Reading and writing AC97 registers is another challange. The core + * Reading and writing AC97 registers is another challenge. The core * provides us status bits when the read register is updated with *another* * value. When we read the same register two times (and the register still * contains the same value) these status bits are not set. We work @@ -83,8 +83,6 @@ static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, /* * SSI DAI format configuration. * Should only be called when port is inactive (i.e. SSIEN = 0). - * Note: We don't use the I2S modes but instead manually configure the - * SSI for I2S because the I2S mode is only a register preset. */ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) { @@ -99,6 +97,10 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) /* data on rising edge of bclk, frame low 1clk before data */ strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0; scr |= SSI_SCR_NET; + if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) { + scr &= ~SSI_I2S_MODE_MASK; + scr |= SSI_SCR_I2S_MODE_SLAVE; + } break; case SND_SOC_DAIFMT_LEFT_J: /* data on rising edge of bclk, frame high with data */ @@ -143,6 +145,11 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) strcr |= SSI_STCR_TFEN0; + if (ssi->flags & IMX_SSI_NET) + scr |= SSI_SCR_NET; + if (ssi->flags & IMX_SSI_SYN) + scr |= SSI_SCR_SYN; + writel(strcr, ssi->base + SSI_STCR); writel(strcr, ssi->base + SSI_SRCR); writel(scr, ssi->base + SSI_SCR); |
