diff options
Diffstat (limited to 'sound/hda/hdac_i915.c')
| -rw-r--r-- | sound/hda/hdac_i915.c | 353 |
1 files changed, 34 insertions, 319 deletions
diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c index cbe818eda336..b5282cbbe489 100644 --- a/sound/hda/hdac_i915.c +++ b/sound/hda/hdac_i915.c @@ -15,88 +15,12 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/component.h> -#include <drm/i915_component.h> #include <sound/core.h> #include <sound/hdaudio.h> #include <sound/hda_i915.h> #include <sound/hda_register.h> -static struct i915_audio_component *hdac_acomp; - -/** - * snd_hdac_set_codec_wakeup - Enable / disable HDMI/DP codec wakeup - * @bus: HDA core bus - * @enable: enable or disable the wakeup - * - * This function is supposed to be used only by a HD-audio controller - * driver that needs the interaction with i915 graphics. - * - * This function should be called during the chip reset, also called at - * resume for updating STATESTS register read. - * - * Returns zero for success or a negative error code. - */ -int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable) -{ - struct i915_audio_component *acomp = bus->audio_component; - - if (!acomp || !acomp->ops) - return -ENODEV; - - if (!acomp->ops->codec_wake_override) { - dev_warn(bus->dev, - "Invalid codec wake callback\n"); - return 0; - } - - dev_dbg(bus->dev, "%s codec wakeup\n", - enable ? "enable" : "disable"); - - acomp->ops->codec_wake_override(acomp->dev, enable); - - return 0; -} -EXPORT_SYMBOL_GPL(snd_hdac_set_codec_wakeup); - -/** - * snd_hdac_display_power - Power up / down the power refcount - * @bus: HDA core bus - * @enable: power up or down - * - * This function is supposed to be used only by a HD-audio controller - * driver that needs the interaction with i915 graphics. - * - * This function manages a refcount and calls the i915 get_power() and - * put_power() ops accordingly, toggling the codec wakeup, too. - * - * Returns zero for success or a negative error code. - */ -int snd_hdac_display_power(struct hdac_bus *bus, bool enable) -{ - struct i915_audio_component *acomp = bus->audio_component; - - if (!acomp || !acomp->ops) - return -ENODEV; - - dev_dbg(bus->dev, "display power %s\n", - enable ? "enable" : "disable"); - - if (enable) { - if (!bus->i915_power_refcount++) { - acomp->ops->get_power(acomp->dev); - snd_hdac_set_codec_wakeup(bus, true); - snd_hdac_set_codec_wakeup(bus, false); - } - } else { - WARN_ON(!bus->i915_power_refcount); - if (!--bus->i915_power_refcount) - acomp->ops->put_power(acomp->dev); - } - - return 0; -} -EXPORT_SYMBOL_GPL(snd_hdac_display_power); +static struct completion bind_complete; #define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \ ((pci)->device == 0x0c0c) || \ @@ -119,7 +43,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_display_power); */ void snd_hdac_i915_set_bclk(struct hdac_bus *bus) { - struct i915_audio_component *acomp = bus->audio_component; + struct drm_audio_component *acomp = bus->audio_component; struct pci_dev *pci = to_pci_dev(bus->dev); int cdclk_freq; unsigned int bclk_m, bclk_n; @@ -158,181 +82,11 @@ void snd_hdac_i915_set_bclk(struct hdac_bus *bus) } EXPORT_SYMBOL_GPL(snd_hdac_i915_set_bclk); -/* There is a fixed mapping between audio pin node and display port. - * on SNB, IVY, HSW, BSW, SKL, BXT, KBL: - * Pin Widget 5 - PORT B (port = 1 in i915 driver) - * Pin Widget 6 - PORT C (port = 2 in i915 driver) - * Pin Widget 7 - PORT D (port = 3 in i915 driver) - * - * on VLV, ILK: - * Pin Widget 4 - PORT B (port = 1 in i915 driver) - * Pin Widget 5 - PORT C (port = 2 in i915 driver) - * Pin Widget 6 - PORT D (port = 3 in i915 driver) - */ -static int pin2port(struct hdac_device *codec, hda_nid_t pin_nid) -{ - int base_nid; - - switch (codec->vendor_id) { - case 0x80860054: /* ILK */ - case 0x80862804: /* ILK */ - case 0x80862882: /* VLV */ - base_nid = 3; - break; - default: - base_nid = 4; - break; - } - - if (WARN_ON(pin_nid <= base_nid || pin_nid > base_nid + 3)) - return -1; - return pin_nid - base_nid; -} - -/** - * snd_hdac_sync_audio_rate - Set N/CTS based on the sample rate - * @codec: HDA codec - * @nid: the pin widget NID - * @dev_id: device identifier - * @rate: the sample rate to set - * - * This function is supposed to be used only by a HD-audio controller - * driver that needs the interaction with i915 graphics. - * - * This function sets N/CTS value based on the given sample rate. - * Returns zero for success, or a negative error code. - */ -int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, - int dev_id, int rate) -{ - struct hdac_bus *bus = codec->bus; - struct i915_audio_component *acomp = bus->audio_component; - int port, pipe; - - if (!acomp || !acomp->ops || !acomp->ops->sync_audio_rate) - return -ENODEV; - port = pin2port(codec, nid); - if (port < 0) - return -EINVAL; - pipe = dev_id; - return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate); -} -EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate); - -/** - * snd_hdac_acomp_get_eld - Get the audio state and ELD via component - * @codec: HDA codec - * @nid: the pin widget NID - * @dev_id: device identifier - * @audio_enabled: the pointer to store the current audio state - * @buffer: the buffer pointer to store ELD bytes - * @max_bytes: the max bytes to be stored on @buffer - * - * This function is supposed to be used only by a HD-audio controller - * driver that needs the interaction with i915 graphics. - * - * This function queries the current state of the audio on the given - * digital port and fetches the ELD bytes onto the given buffer. - * It returns the number of bytes for the total ELD data, zero for - * invalid ELD, or a negative error code. - * - * The return size is the total bytes required for the whole ELD bytes, - * thus it may be over @max_bytes. If it's over @max_bytes, it implies - * that only a part of ELD bytes have been fetched. - */ -int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id, - bool *audio_enabled, char *buffer, int max_bytes) -{ - struct hdac_bus *bus = codec->bus; - struct i915_audio_component *acomp = bus->audio_component; - int port, pipe; - - if (!acomp || !acomp->ops || !acomp->ops->get_eld) - return -ENODEV; - - port = pin2port(codec, nid); - if (port < 0) - return -EINVAL; - - pipe = dev_id; - return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled, - buffer, max_bytes); -} -EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld); - -static int hdac_component_master_bind(struct device *dev) -{ - struct i915_audio_component *acomp = hdac_acomp; - int ret; - - ret = component_bind_all(dev, acomp); - if (ret < 0) - return ret; - - if (WARN_ON(!(acomp->dev && acomp->ops && acomp->ops->get_power && - acomp->ops->put_power && acomp->ops->get_cdclk_freq))) { - ret = -EINVAL; - goto out_unbind; - } - - /* - * Atm, we don't support dynamic unbinding initiated by the child - * component, so pin its containing module until we unbind. - */ - if (!try_module_get(acomp->ops->owner)) { - ret = -ENODEV; - goto out_unbind; - } - - return 0; - -out_unbind: - component_unbind_all(dev, acomp); - - return ret; -} - -static void hdac_component_master_unbind(struct device *dev) -{ - struct i915_audio_component *acomp = hdac_acomp; - - module_put(acomp->ops->owner); - component_unbind_all(dev, acomp); - WARN_ON(acomp->ops || acomp->dev); -} - -static const struct component_master_ops hdac_component_master_ops = { - .bind = hdac_component_master_bind, - .unbind = hdac_component_master_unbind, -}; - -static int hdac_component_master_match(struct device *dev, void *data) +static int i915_component_master_match(struct device *dev, void *data) { - /* i915 is the only supported component */ return !strcmp(dev->driver->name, "i915"); } -/** - * snd_hdac_i915_register_notifier - Register i915 audio component ops - * @aops: i915 audio component ops - * - * This function is supposed to be used only by a HD-audio controller - * driver that needs the interaction with i915 graphics. - * - * This function sets the given ops to be called by the i915 graphics driver. - * - * Returns zero for success or a negative error code. - */ -int snd_hdac_i915_register_notifier(const struct i915_audio_component_audio_ops *aops) -{ - if (!hdac_acomp) - return -ENODEV; - - hdac_acomp->audio_ops = aops; - return 0; -} -EXPORT_SYMBOL_GPL(snd_hdac_i915_register_notifier); - /* check whether intel graphics is present */ static bool i915_gfx_present(void) { @@ -345,6 +99,19 @@ static bool i915_gfx_present(void) return pci_dev_present(ids); } +static int i915_master_bind(struct device *dev, + struct drm_audio_component *acomp) +{ + complete_all(&bind_complete); + /* clear audio_ops here as it was needed only for completion call */ + acomp->audio_ops = NULL; + return 0; +} + +static const struct drm_audio_component_audio_ops i915_init_ops = { + .master_bind = i915_master_bind +}; + /** * snd_hdac_i915_init - Initialize i915 audio component * @bus: HDA core bus @@ -359,83 +126,31 @@ static bool i915_gfx_present(void) */ int snd_hdac_i915_init(struct hdac_bus *bus) { - struct component_match *match = NULL; - struct device *dev = bus->dev; - struct i915_audio_component *acomp; - int ret; - - if (WARN_ON(hdac_acomp)) - return -EBUSY; + struct drm_audio_component *acomp; + int err; if (!i915_gfx_present()) return -ENODEV; - acomp = kzalloc(sizeof(*acomp), GFP_KERNEL); - if (!acomp) - return -ENOMEM; - bus->audio_component = acomp; - hdac_acomp = acomp; - - component_match_add(dev, &match, hdac_component_master_match, bus); - ret = component_master_add_with_match(dev, &hdac_component_master_ops, - match); - if (ret < 0) - goto out_err; - - /* - * Atm, we don't support deferring the component binding, so make sure - * i915 is loaded and that the binding successfully completes. - */ - request_module("i915"); + init_completion(&bind_complete); + err = snd_hdac_acomp_init(bus, &i915_init_ops, + i915_component_master_match, + sizeof(struct i915_audio_component) - sizeof(*acomp)); + if (err < 0) + return err; + acomp = bus->audio_component; + if (!acomp) + return -ENODEV; if (!acomp->ops) { - ret = -ENODEV; - goto out_master_del; + request_module("i915"); + /* 10s timeout */ + wait_for_completion_timeout(&bind_complete, 10 * 1000); + } + if (!acomp->ops) { + snd_hdac_acomp_exit(bus); + return -ENODEV; } - dev_dbg(dev, "bound to i915 component master\n"); - return 0; -out_master_del: - component_master_del(dev, &hdac_component_master_ops); -out_err: - kfree(acomp); - bus->audio_component = NULL; - hdac_acomp = NULL; - dev_info(dev, "failed to add i915 component master (%d)\n", ret); - - return ret; } EXPORT_SYMBOL_GPL(snd_hdac_i915_init); - -/** - * snd_hdac_i915_exit - Finalize i915 audio component - * @bus: HDA core bus - * - * This function is supposed to be used only by a HD-audio controller - * driver that needs the interaction with i915 graphics. - * - * This function releases the i915 audio component that has been used. - * - * Returns zero for success or a negative error code. - */ -int snd_hdac_i915_exit(struct hdac_bus *bus) -{ - struct device *dev = bus->dev; - struct i915_audio_component *acomp = bus->audio_component; - - if (!acomp) - return 0; - - WARN_ON(bus->i915_power_refcount); - if (bus->i915_power_refcount > 0 && acomp->ops) - acomp->ops->put_power(acomp->dev); - - component_master_del(dev, &hdac_component_master_ops); - - kfree(acomp); - bus->audio_component = NULL; - hdac_acomp = NULL; - - return 0; -} -EXPORT_SYMBOL_GPL(snd_hdac_i915_exit); |
