diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 158 |
1 files changed, 118 insertions, 40 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 9e1b24c29f0c..63921672bed0 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -68,26 +68,6 @@ struct wiphy; */ /** - * enum ieee80211_band - supported frequency bands - * - * The bands are assigned this way because the supported - * bitrates differ in these bands. - * - * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band - * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) - * @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) - * @IEEE80211_NUM_BANDS: number of defined bands - */ -enum ieee80211_band { - IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, - IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, - IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ, - - /* keep last */ - IEEE80211_NUM_BANDS -}; - -/** * enum ieee80211_channel_flags - channel flags * * Channel flags set by the regulatory control code. @@ -167,7 +147,7 @@ enum ieee80211_channel_flags { * @dfs_cac_ms: DFS CAC time in milliseconds, this is valid for DFS channels. */ struct ieee80211_channel { - enum ieee80211_band band; + enum nl80211_band band; u16 center_freq; u16 hw_value; u32 flags; @@ -324,7 +304,7 @@ struct ieee80211_sta_vht_cap { struct ieee80211_supported_band { struct ieee80211_channel *channels; struct ieee80211_rate *bitrates; - enum ieee80211_band band; + enum nl80211_band band; int n_channels; int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; @@ -816,6 +796,7 @@ enum station_parameters_apply_mask { * @supported_oper_classes_len: number of supported operating classes * @opmode_notif: operating mode field from Operating Mode Notification * @opmode_notif_used: information if operating mode field is used + * @support_p2p_ps: information if station supports P2P PS mechanism */ struct station_parameters { const u8 *supported_rates; @@ -841,6 +822,7 @@ struct station_parameters { u8 supported_oper_classes_len; u8 opmode_notif; bool opmode_notif_used; + int support_p2p_ps; }; /** @@ -1063,11 +1045,12 @@ struct cfg80211_tid_stats { * @rx_beacon: number of beacons received from this peer * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received * from this peer + * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs. */ struct station_info { - u32 filled; + u64 filled; u32 connected_time; u32 inactive_time; u64 rx_bytes; @@ -1106,6 +1089,7 @@ struct station_info { u32 expected_throughput; u64 rx_beacon; + u64 rx_duration; u8 rx_beacon_signal_avg; struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1]; }; @@ -1368,7 +1352,7 @@ struct mesh_setup { bool user_mpm; u8 dtim_period; u16 beacon_interval; - int mcast_rate[IEEE80211_NUM_BANDS]; + int mcast_rate[NUM_NL80211_BANDS]; u32 basic_rates; }; @@ -1455,6 +1439,7 @@ struct cfg80211_ssid { * @mac_addr_mask: MAC address mask used with randomisation, bits that * are 0 in the mask should be randomised, bits that are 1 should * be taken from the @mac_addr + * @bssid: BSSID to scan for (most commonly, the wildcard BSSID) */ struct cfg80211_scan_request { struct cfg80211_ssid *ssids; @@ -1465,12 +1450,13 @@ struct cfg80211_scan_request { size_t ie_len; u32 flags; - u32 rates[IEEE80211_NUM_BANDS]; + u32 rates[NUM_NL80211_BANDS]; struct wireless_dev *wdev; u8 mac_addr[ETH_ALEN] __aligned(2); u8 mac_addr_mask[ETH_ALEN] __aligned(2); + u8 bssid[ETH_ALEN] __aligned(2); /* internal */ struct wiphy *wiphy; @@ -1617,7 +1603,7 @@ struct cfg80211_inform_bss { }; /** - * struct cfg80211_bss_ie_data - BSS entry IE data + * struct cfg80211_bss_ies - BSS entry IE data * @tsf: TSF contained in the frame that carried these IEs * @rcu_head: internal use, for freeing * @len: length of the IEs @@ -1746,7 +1732,12 @@ enum cfg80211_assoc_req_flags { * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association * @crypto: crypto settings - * @prev_bssid: previous BSSID, if not %NULL use reassociate frame + * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used + * to indicate a request to reassociate within the ESS instead of a request + * do the initial association with the ESS. When included, this is set to + * the BSSID of the current association, i.e., to the value that is + * included in the Current AP address field of the Reassociation Request + * frame. * @flags: See &enum cfg80211_assoc_req_flags * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. @@ -1851,12 +1842,39 @@ struct cfg80211_ibss_params { bool privacy; bool control_port; bool userspace_handles_dfs; - int mcast_rate[IEEE80211_NUM_BANDS]; + int mcast_rate[NUM_NL80211_BANDS]; struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; }; /** + * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment. + * + * @band: band of BSS which should match for RSSI level adjustment. + * @delta: value of RSSI level adjustment. + */ +struct cfg80211_bss_select_adjust { + enum nl80211_band band; + s8 delta; +}; + +/** + * struct cfg80211_bss_selection - connection parameters for BSS selection. + * + * @behaviour: requested BSS selection behaviour. + * @param: parameters for requestion behaviour. + * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF. + * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST. + */ +struct cfg80211_bss_selection { + enum nl80211_bss_select_attr behaviour; + union { + enum nl80211_band band_pref; + struct cfg80211_bss_select_adjust adjust; + } param; +}; + +/** * struct cfg80211_connect_params - Connection parameters * * This structure provides information needed to complete IEEE 802.11 @@ -1893,6 +1911,13 @@ struct cfg80211_ibss_params { * @vht_capa_mask: The bits of vht_capa which are to be used. * @pbss: if set, connect to a PCP instead of AP. Valid for DMG * networks. + * @bss_select: criteria to be used for BSS selection. + * @prev_bssid: previous BSSID, if not %NULL use reassociate frame. This is used + * to indicate a request to reassociate within the ESS instead of a request + * do the initial association with the ESS. When included, this is set to + * the BSSID of the current association, i.e., to the value that is + * included in the Current AP address field of the Reassociation Request + * frame. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; @@ -1916,6 +1941,8 @@ struct cfg80211_connect_params { struct ieee80211_vht_cap vht_capa; struct ieee80211_vht_cap vht_capa_mask; bool pbss; + struct cfg80211_bss_selection bss_select; + const u8 *prev_bssid; }; /** @@ -1945,7 +1972,7 @@ struct cfg80211_bitrate_mask { u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN]; u16 vht_mcs[NL80211_VHT_NSS_MAX]; enum nl80211_txrate_gi gi; - } control[IEEE80211_NUM_BANDS]; + } control[NUM_NL80211_BANDS]; }; /** * struct cfg80211_pmksa - PMK Security Association @@ -2342,7 +2369,17 @@ struct cfg80211_qos_map { * @connect: Connect to the ESS with the specified parameters. When connected, * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. * If the connection fails for some reason, call cfg80211_connect_result() - * with the status from the AP. + * with the status from the AP. The driver is allowed to roam to other + * BSSes within the ESS when the other BSS matches the connect parameters. + * When such roaming is initiated by the driver, the driver is expected to + * verify that the target matches the configured security parameters and + * to use Reassociation Request frame instead of Association Request frame. + * The connect function can also be used to request the driver to perform + * a specific roam when connected to an ESS. In that case, the prev_bssid + * parameter is set to the BSSID of the currently associated BSS as an + * indication of requesting reassociation. In both the driver-initiated and + * new connect() call initiated roaming cases, the result of roaming is + * indicated with a call to cfg80211_roamed() or cfg80211_roamed_bss(). * (invoked with the wireless_dev mutex held) * @disconnect: Disconnect from the BSS/ESS. * (invoked with the wireless_dev mutex held) @@ -2622,7 +2659,7 @@ struct cfg80211_ops { int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); int (*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev, - int rate[IEEE80211_NUM_BANDS]); + int rate[NUM_NL80211_BANDS]); int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); @@ -3152,6 +3189,9 @@ struct wiphy_vendor_command { * @vht_capa_mod_mask: Specify what VHT capabilities can be over-ridden. * If null, then none can be over-ridden. * + * @wdev_list: the list of associated (virtual) interfaces; this list must + * not be modified by the driver, but can be read with RTNL/RCU protection. + * * @max_acl_mac_addrs: Maximum number of MAC addresses that the device * supports for ACL. * @@ -3184,6 +3224,9 @@ struct wiphy_vendor_command { * low rssi when a frame is heard on different channel, then it should set * this variable to the maximal offset for which it can compensate. * This value should be set in MHz. + * @bss_select_support: bitmask indicating the BSS selection criteria supported + * by the driver in the .connect() callback. The bit position maps to the + * attribute indices defined in &enum nl80211_bss_select_attr. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -3265,7 +3308,7 @@ struct wiphy { * help determine whether you own this wiphy or not. */ const void *privid; - struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + struct ieee80211_supported_band *bands[NUM_NL80211_BANDS]; /* Lets us get back the wiphy on the callback */ void (*reg_notifier)(struct wiphy *wiphy, @@ -3288,6 +3331,8 @@ struct wiphy { const struct ieee80211_ht_cap *ht_capa_mod_mask; const struct ieee80211_vht_cap *vht_capa_mod_mask; + struct list_head wdev_list; + /* the network namespace this phy lives in currently */ possible_net_t _net; @@ -3306,6 +3351,8 @@ struct wiphy { u8 max_num_csa_counters; u8 max_adj_channel_rssi_comp; + u32 bss_select_support; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -3598,7 +3645,7 @@ static inline void *wdev_priv(struct wireless_dev *wdev) * @band: band, necessary due to channel number overlap * Return: The corresponding frequency (in MHz), or 0 if the conversion failed. */ -int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); +int ieee80211_channel_to_frequency(int chan, enum nl80211_band band); /** * ieee80211_frequency_to_channel - convert frequency to channel number @@ -3851,7 +3898,7 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); * cfg80211_find_vendor_ie - find vendor specific information element in data * * @oui: vendor OUI - * @oui_type: vendor-specific OUI type + * @oui_type: vendor-specific OUI type (must be < 0xff), negative means any * @ies: data consisting of IEs * @len: length of data * @@ -3863,7 +3910,7 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); * Note: There are no checks on the element length other than having to fit into * the given data. */ -const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, +const u8 *cfg80211_find_vendor_ie(unsigned int oui, int oui_type, const u8 *ies, int len); /** @@ -4610,6 +4657,32 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) #endif /** + * cfg80211_connect_bss - notify cfg80211 of connection result + * + * @dev: network device + * @bssid: the BSSID of the AP + * @bss: entry of bss to which STA got connected to, can be obtained + * through cfg80211_get_bss (may be %NULL) + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @status: status code, 0 for successful connection, use + * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you + * the real status code for failures. + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever connect() has + * succeeded. This is similar to cfg80211_connect_result(), but with the + * option of identifying the exact bss entry for the connection. Only one of + * these functions should be called. + */ +void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid, + struct cfg80211_bss *bss, const u8 *req_ie, + size_t req_ie_len, const u8 *resp_ie, + size_t resp_ie_len, u16 status, gfp_t gfp); + +/** * cfg80211_connect_result - notify cfg80211 of connection result * * @dev: network device @@ -4626,10 +4699,15 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp) * It should be called by the underlying driver whenever connect() has * succeeded. */ -void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, - const u8 *req_ie, size_t req_ie_len, - const u8 *resp_ie, size_t resp_ie_len, - u16 status, gfp_t gfp); +static inline void +cfg80211_connect_result(struct net_device *dev, const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, + u16 status, gfp_t gfp) +{ + cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, resp_ie, + resp_ie_len, status, gfp); +} /** * cfg80211_roamed - notify cfg80211 of roaming @@ -5029,7 +5107,7 @@ void cfg80211_ch_switch_started_notify(struct net_device *dev, * Returns %true if the conversion was successful, %false otherwise. */ bool ieee80211_operating_class_to_band(u8 operating_class, - enum ieee80211_band *band); + enum nl80211_band *band); /** * ieee80211_chandef_to_operating_class - convert chandef to operation class |
