diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/i2c/twl.h | 73 | ||||
| -rw-r--r-- | include/linux/input/ti_am335x_tsc.h | 23 | ||||
| -rw-r--r-- | include/linux/input/ti_tscadc.h | 17 | ||||
| -rw-r--r-- | include/linux/mfd/arizona/registers.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/as3711.h | 126 | ||||
| -rw-r--r-- | include/linux/mfd/da9052/da9052.h | 10 | ||||
| -rw-r--r-- | include/linux/mfd/da9055/core.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/da9055/pdata.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/da9055/reg.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/rc5t583.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/retu.h | 22 | ||||
| -rw-r--r-- | include/linux/mfd/sta2x11-mfd.h | 198 | ||||
| -rw-r--r-- | include/linux/mfd/stmpe.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/ti_am335x_tscadc.h | 152 | ||||
| -rw-r--r-- | include/linux/mfd/tps65090.h | 73 | ||||
| -rw-r--r-- | include/linux/mfd/tps6586x.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/tps65910.h | 145 | ||||
| -rw-r--r-- | include/linux/mfd/tps80031.h | 637 | ||||
| -rw-r--r-- | include/linux/mfd/twl6040.h | 10 | ||||
| -rw-r--r-- | include/linux/mfd/viperboard.h | 110 | ||||
| -rw-r--r-- | include/linux/platform_data/ti_am335x_adc.h | 14 |
21 files changed, 1494 insertions, 131 deletions
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 9a5e28462324..1ff54b114efc 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -39,52 +39,51 @@ * address each module uses within a given i2c slave. */ -/* Slave 0 (i2c address 0x48) */ -#define TWL4030_MODULE_USB 0x00 - -/* Slave 1 (i2c address 0x49) */ -#define TWL4030_MODULE_AUDIO_VOICE 0x01 -#define TWL4030_MODULE_GPIO 0x02 -#define TWL4030_MODULE_INTBR 0x03 -#define TWL4030_MODULE_PIH 0x04 -#define TWL4030_MODULE_TEST 0x05 - -/* Slave 2 (i2c address 0x4a) */ -#define TWL4030_MODULE_KEYPAD 0x06 -#define TWL4030_MODULE_MADC 0x07 -#define TWL4030_MODULE_INTERRUPTS 0x08 -#define TWL4030_MODULE_LED 0x09 -#define TWL4030_MODULE_MAIN_CHARGE 0x0A -#define TWL4030_MODULE_PRECHARGE 0x0B -#define TWL4030_MODULE_PWM0 0x0C -#define TWL4030_MODULE_PWM1 0x0D -#define TWL4030_MODULE_PWMA 0x0E -#define TWL4030_MODULE_PWMB 0x0F - -#define TWL5031_MODULE_ACCESSORY 0x10 -#define TWL5031_MODULE_INTERRUPTS 0x11 - -/* Slave 3 (i2c address 0x4b) */ -#define TWL4030_MODULE_BACKUP 0x12 -#define TWL4030_MODULE_INT 0x13 -#define TWL4030_MODULE_PM_MASTER 0x14 -#define TWL4030_MODULE_PM_RECEIVER 0x15 -#define TWL4030_MODULE_RTC 0x16 -#define TWL4030_MODULE_SECURED_REG 0x17 +enum twl4030_module_ids { + TWL4030_MODULE_USB = 0, /* Slave 0 (i2c address 0x48) */ + TWL4030_MODULE_AUDIO_VOICE, /* Slave 1 (i2c address 0x49) */ + TWL4030_MODULE_GPIO, + TWL4030_MODULE_INTBR, + TWL4030_MODULE_PIH, + + TWL4030_MODULE_TEST, + TWL4030_MODULE_KEYPAD, /* Slave 2 (i2c address 0x4a) */ + TWL4030_MODULE_MADC, + TWL4030_MODULE_INTERRUPTS, + TWL4030_MODULE_LED, + + TWL4030_MODULE_MAIN_CHARGE, + TWL4030_MODULE_PRECHARGE, + TWL4030_MODULE_PWM0, + TWL4030_MODULE_PWM1, + TWL4030_MODULE_PWMA, + + TWL4030_MODULE_PWMB, + TWL5031_MODULE_ACCESSORY, + TWL5031_MODULE_INTERRUPTS, + TWL4030_MODULE_BACKUP, /* Slave 3 (i2c address 0x4b) */ + TWL4030_MODULE_INT, + + TWL4030_MODULE_PM_MASTER, + TWL4030_MODULE_PM_RECEIVER, + TWL4030_MODULE_RTC, + TWL4030_MODULE_SECURED_REG, + TWL4030_MODULE_LAST, +}; +/* Similar functionalities implemented in TWL4030/6030 */ #define TWL_MODULE_USB TWL4030_MODULE_USB -#define TWL_MODULE_AUDIO_VOICE TWL4030_MODULE_AUDIO_VOICE #define TWL_MODULE_PIH TWL4030_MODULE_PIH -#define TWL_MODULE_MADC TWL4030_MODULE_MADC #define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE #define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER #define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER #define TWL_MODULE_RTC TWL4030_MODULE_RTC #define TWL_MODULE_PWM TWL4030_MODULE_PWM0 +#define TWL_MODULE_LED TWL4030_MODULE_LED -#define TWL6030_MODULE_ID0 0x0D -#define TWL6030_MODULE_ID1 0x0E -#define TWL6030_MODULE_ID2 0x0F +#define TWL6030_MODULE_ID0 13 +#define TWL6030_MODULE_ID1 14 +#define TWL6030_MODULE_ID2 15 #define GPIO_INTR_OFFSET 0 #define KEYPAD_INTR_OFFSET 1 diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h new file mode 100644 index 000000000000..49269a2aa329 --- /dev/null +++ b/include/linux/input/ti_am335x_tsc.h @@ -0,0 +1,23 @@ +#ifndef __LINUX_TI_AM335X_TSC_H +#define __LINUX_TI_AM335X_TSC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + * @steps_to_configure: The sequencer supports a total of + * 16 programmable steps. + * A step configured to read a single + * co-ordinate value, can be applied + * more number of times for better results. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; + int steps_to_configure; +}; + +#endif diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h deleted file mode 100644 index b10a527a92a4..000000000000 --- a/include/linux/input/ti_tscadc.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __LINUX_TI_TSCADC_H -#define __LINUX_TI_TSCADC_H - -/** - * struct tsc_data Touchscreen wire configuration - * @wires: Wires refer to application modes - * i.e. 4/5/8 wire touchscreen support - * on the platform. - * @x_plate_resistance: X plate resistance. - */ - -struct tsc_data { - int wires; - int x_plate_resistance; -}; - -#endif diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index ba26e99c388d..1f6fe31a4d5c 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -981,6 +981,7 @@ #define ARIZONA_DSP1_CLOCKING_1 0x1101 #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 +#define ARIZONA_DSP1_STATUS_3 0x1106 #define ARIZONA_DSP2_CONTROL_1 0x1200 #define ARIZONA_DSP2_CLOCKING_1 0x1201 #define ARIZONA_DSP2_STATUS_1 0x1204 diff --git a/include/linux/mfd/as3711.h b/include/linux/mfd/as3711.h new file mode 100644 index 000000000000..38452ce1e892 --- /dev/null +++ b/include/linux/mfd/as3711.h @@ -0,0 +1,126 @@ +/* + * AS3711 PMIC MFC driver header + * + * Copyright (C) 2012 Renesas Electronics Corporation + * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License as + * published by the Free Software Foundation + */ + +#ifndef MFD_AS3711_H +#define MFD_AS3711_H + +/* + * Client data + */ + +/* Register addresses */ +#define AS3711_SD_1_VOLTAGE 0 /* Digital Step-Down */ +#define AS3711_SD_2_VOLTAGE 1 +#define AS3711_SD_3_VOLTAGE 2 +#define AS3711_SD_4_VOLTAGE 3 +#define AS3711_LDO_1_VOLTAGE 4 /* Analog LDO */ +#define AS3711_LDO_2_VOLTAGE 5 +#define AS3711_LDO_3_VOLTAGE 6 /* Digital LDO */ +#define AS3711_LDO_4_VOLTAGE 7 +#define AS3711_LDO_5_VOLTAGE 8 +#define AS3711_LDO_6_VOLTAGE 9 +#define AS3711_LDO_7_VOLTAGE 0xa +#define AS3711_LDO_8_VOLTAGE 0xb +#define AS3711_SD_CONTROL 0x10 +#define AS3711_GPIO_SIGNAL_OUT 0x20 +#define AS3711_GPIO_SIGNAL_IN 0x21 +#define AS3711_SD_CONTROL_1 0x30 +#define AS3711_SD_CONTROL_2 0x31 +#define AS3711_CURR_CONTROL 0x40 +#define AS3711_CURR1_VALUE 0x43 +#define AS3711_CURR2_VALUE 0x44 +#define AS3711_CURR3_VALUE 0x45 +#define AS3711_STEPUP_CONTROL_1 0x50 +#define AS3711_STEPUP_CONTROL_2 0x51 +#define AS3711_STEPUP_CONTROL_4 0x53 +#define AS3711_STEPUP_CONTROL_5 0x54 +#define AS3711_REG_STATUS 0x73 +#define AS3711_INTERRUPT_STATUS_1 0x77 +#define AS3711_INTERRUPT_STATUS_2 0x78 +#define AS3711_INTERRUPT_STATUS_3 0x79 +#define AS3711_CHARGER_STATUS_1 0x86 +#define AS3711_CHARGER_STATUS_2 0x87 +#define AS3711_ASIC_ID_1 0x90 +#define AS3711_ASIC_ID_2 0x91 + +#define AS3711_MAX_REGS 0x92 + +/* Regulators */ +enum { + AS3711_REGULATOR_SD_1, + AS3711_REGULATOR_SD_2, + AS3711_REGULATOR_SD_3, + AS3711_REGULATOR_SD_4, + AS3711_REGULATOR_LDO_1, + AS3711_REGULATOR_LDO_2, + AS3711_REGULATOR_LDO_3, + AS3711_REGULATOR_LDO_4, + AS3711_REGULATOR_LDO_5, + AS3711_REGULATOR_LDO_6, + AS3711_REGULATOR_LDO_7, + AS3711_REGULATOR_LDO_8, + + AS3711_REGULATOR_MAX, +}; + +struct device; +struct regmap; + +struct as3711 { + struct device *dev; + struct regmap *regmap; +}; + +#define AS3711_MAX_STEPDOWN 4 +#define AS3711_MAX_STEPUP 2 +#define AS3711_MAX_LDO 8 + +enum as3711_su2_feedback { + AS3711_SU2_VOLTAGE, + AS3711_SU2_CURR1, + AS3711_SU2_CURR2, + AS3711_SU2_CURR3, + AS3711_SU2_CURR_AUTO, +}; + +enum as3711_su2_fbprot { + AS3711_SU2_LX_SD4, + AS3711_SU2_GPIO2, + AS3711_SU2_GPIO3, + AS3711_SU2_GPIO4, +}; + +/* + * Platform data + */ + +struct as3711_regulator_pdata { + struct regulator_init_data *init_data[AS3711_REGULATOR_MAX]; +}; + +struct as3711_bl_pdata { + const char *su1_fb; + int su1_max_uA; + const char *su2_fb; + int su2_max_uA; + enum as3711_su2_feedback su2_feedback; + enum as3711_su2_fbprot su2_fbprot; + bool su2_auto_curr1; + bool su2_auto_curr2; + bool su2_auto_curr3; +}; + +struct as3711_platform_data { + struct as3711_regulator_pdata regulator; + struct as3711_bl_pdata backlight; +}; + +#endif diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 0507c4c21a7d..86dd93de6ff2 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -146,4 +146,14 @@ void da9052_device_exit(struct da9052 *da9052); extern struct regmap_config da9052_regmap_config; +int da9052_irq_init(struct da9052 *da9052); +int da9052_irq_exit(struct da9052 *da9052); +int da9052_request_irq(struct da9052 *da9052, int irq, char *name, + irq_handler_t handler, void *data); +void da9052_free_irq(struct da9052 *da9052, int irq, void *data); + +int da9052_enable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq_nosync(struct da9052 *da9052, int irq); + #endif /* __MFD_DA9052_DA9052_H */ diff --git a/include/linux/mfd/da9055/core.h b/include/linux/mfd/da9055/core.h index c96ad682c59e..956afa445998 100644 --- a/include/linux/mfd/da9055/core.h +++ b/include/linux/mfd/da9055/core.h @@ -1,4 +1,4 @@ -/* +/* * da9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index f87a6c172a91..04e092be4b07 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Dialog Semiconductor Ltd. +/* Copyright (C) 2012 Dialog Semiconductor Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/linux/mfd/da9055/reg.h b/include/linux/mfd/da9055/reg.h index df237ee54803..2b592e072dbf 100644 --- a/include/linux/mfd/da9055/reg.h +++ b/include/linux/mfd/da9055/reg.h @@ -1,4 +1,4 @@ -/* +/* * DA9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index 36c242e52ef1..fd413ccab915 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h @@ -33,6 +33,7 @@ /* Maximum number of main interrupts */ #define MAX_MAIN_INTERRUPT 5 #define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_EN_REGS 8 #define RC5T583_MAX_INTERRUPT_MASK_REGS 9 /* Interrupt enable register */ @@ -304,7 +305,7 @@ struct rc5t583 { uint8_t intc_inten_reg; /* For group interrupt bits and address */ - uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_EN_REGS]; /* For gpio edge */ uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; diff --git a/include/linux/mfd/retu.h b/include/linux/mfd/retu.h new file mode 100644 index 000000000000..1e2715d5b836 --- /dev/null +++ b/include/linux/mfd/retu.h @@ -0,0 +1,22 @@ +/* + * Retu MFD driver interface + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#ifndef __LINUX_MFD_RETU_H +#define __LINUX_MFD_RETU_H + +struct retu_dev; + +int retu_read(struct retu_dev *, u8); +int retu_write(struct retu_dev *, u8, u16); + +/* Registers */ +#define RETU_REG_WATCHDOG 0x17 /* Watchdog */ +#define RETU_REG_CC1 0x0d /* Common control register 1 */ +#define RETU_REG_STATUS 0x16 /* Status register */ + +#endif /* __LINUX_MFD_RETU_H */ diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h index d179227e866f..9a855ac11cbf 100644 --- a/include/linux/mfd/sta2x11-mfd.h +++ b/include/linux/mfd/sta2x11-mfd.h @@ -26,6 +26,28 @@ #include <linux/types.h> #include <linux/pci.h> +enum sta2x11_mfd_plat_dev { + sta2x11_sctl = 0, + sta2x11_gpio, + sta2x11_scr, + sta2x11_time, + sta2x11_apbreg, + sta2x11_apb_soc_regs, + sta2x11_vic, + sta2x11_n_mfd_plat_devs, +}; + +#define STA2X11_MFD_SCTL_NAME "sta2x11-sctl" +#define STA2X11_MFD_GPIO_NAME "sta2x11-gpio" +#define STA2X11_MFD_SCR_NAME "sta2x11-scr" +#define STA2X11_MFD_TIME_NAME "sta2x11-time" +#define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg" +#define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs" +#define STA2X11_MFD_VIC_NAME "sta2x11-vic" + +extern u32 +__sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev); + /* * The MFD PCI block includes the GPIO peripherals and other register blocks. * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".) @@ -182,7 +204,11 @@ struct sta2x11_gpio_pdata { * The APB bridge has its own registers, needed by our users as well. * They are accessed with the following read/mask/write function. */ -u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); +static inline u32 +sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg); +} /* CAN and MLB */ #define APBREG_BSR 0x00 /* Bridge Status Reg */ @@ -211,19 +237,45 @@ u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); * The system controller has its own registers. Some of these are accessed * by out users as well, using the following read/mask/write/function */ -u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); +static inline +u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl); +} #define SCTL_SCCTL 0x00 /* System controller control register */ #define SCTL_ARMCFG 0x04 /* ARM configuration register */ #define SCTL_SCPLLCTL 0x08 /* PLL control status register */ + +#define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1) +#define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3) +#define SCTL_SCPLLCTL_STRB_BYPASS BIT(6) +#define SCTL_SCPLLCTL_STRB_INPUT BIT(8) + #define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */ + +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4 + + #define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */ + +#define SCTL_SCRESFRACT_MASK 0x0000ffff + + #define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */ #define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */ #define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */ #define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */ #define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */ #define SCTL_SCGRST 0x28 /* Peripheral global reset */ +#define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */ #define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */ #define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */ #define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */ @@ -321,4 +373,146 @@ u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); #define SCTL_SCPEREN1_I2C3 (1 << 16) #define SCTL_SCPEREN1_USB_PHY (1 << 17) +/* + * APB-SOC registers + */ +static inline +u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs); +} + +#define PCIE_EP1_FUNC3_0_INTR_REG 0x000 +#define PCIE_EP1_FUNC7_4_INTR_REG 0x004 +#define PCIE_EP2_FUNC3_0_INTR_REG 0x008 +#define PCIE_EP2_FUNC7_4_INTR_REG 0x00c +#define PCIE_EP3_FUNC3_0_INTR_REG 0x010 +#define PCIE_EP3_FUNC7_4_INTR_REG 0x014 +#define PCIE_EP4_FUNC3_0_INTR_REG 0x018 +#define PCIE_EP4_FUNC7_4_INTR_REG 0x01c +#define PCIE_INTR_ENABLE0_REG 0x020 +#define PCIE_INTR_ENABLE1_REG 0x024 +#define PCIE_EP1_FUNC_TC_REG 0x028 +#define PCIE_EP2_FUNC_TC_REG 0x02c +#define PCIE_EP3_FUNC_TC_REG 0x030 +#define PCIE_EP4_FUNC_TC_REG 0x034 +#define PCIE_EP1_FUNC_F_REG 0x038 +#define PCIE_EP2_FUNC_F_REG 0x03c +#define PCIE_EP3_FUNC_F_REG 0x040 +#define PCIE_EP4_FUNC_F_REG 0x044 +#define PCIE_PAB_AMBA_SW_RST_REG 0x048 +#define PCIE_PM_STATUS_0_PORT_0_4 0x04c +#define PCIE_PM_STATUS_7_0_EP1 0x050 +#define PCIE_PM_STATUS_7_0_EP2 0x054 +#define PCIE_PM_STATUS_7_0_EP3 0x058 +#define PCIE_PM_STATUS_7_0_EP4 0x05c +#define PCIE_DEV_ID_0_EP1_REG 0x060 +#define PCIE_CC_REV_ID_0_EP1_REG 0x064 +#define PCIE_DEV_ID_1_EP1_REG 0x068 +#define PCIE_CC_REV_ID_1_EP1_REG 0x06c +#define PCIE_DEV_ID_2_EP1_REG 0x070 +#define PCIE_CC_REV_ID_2_EP1_REG 0x074 +#define PCIE_DEV_ID_3_EP1_REG 0x078 +#define PCIE_CC_REV_ID_3_EP1_REG 0x07c +#define PCIE_DEV_ID_4_EP1_REG 0x080 +#define PCIE_CC_REV_ID_4_EP1_REG 0x084 +#define PCIE_DEV_ID_5_EP1_REG 0x088 +#define PCIE_CC_REV_ID_5_EP1_REG 0x08c +#define PCIE_DEV_ID_6_EP1_REG 0x090 +#define PCIE_CC_REV_ID_6_EP1_REG 0x094 +#define PCIE_DEV_ID_7_EP1_REG 0x098 +#define PCIE_CC_REV_ID_7_EP1_REG 0x09c +#define PCIE_DEV_ID_0_EP2_REG 0x0a0 +#define PCIE_CC_REV_ID_0_EP2_REG 0x0a4 +#define PCIE_DEV_ID_1_EP2_REG 0x0a8 +#define PCIE_CC_REV_ID_1_EP2_REG 0x0ac +#define PCIE_DEV_ID_2_EP2_REG 0x0b0 +#define PCIE_CC_REV_ID_2_EP2_REG 0x0b4 +#define PCIE_DEV_ID_3_EP2_REG 0x0b8 +#define PCIE_CC_REV_ID_3_EP2_REG 0x0bc +#define PCIE_DEV_ID_4_EP2_REG 0x0c0 +#define PCIE_CC_REV_ID_4_EP2_REG 0x0c4 +#define PCIE_DEV_ID_5_EP2_REG 0x0c8 +#define PCIE_CC_REV_ID_5_EP2_REG 0x0cc +#define PCIE_DEV_ID_6_EP2_REG 0x0d0 +#define PCIE_CC_REV_ID_6_EP2_REG 0x0d4 +#define PCIE_DEV_ID_7_EP2_REG 0x0d8 +#define PCIE_CC_REV_ID_7_EP2_REG 0x0dC +#define PCIE_DEV_ID_0_EP3_REG 0x0e0 +#define PCIE_CC_REV_ID_0_EP3_REG 0x0e4 +#define PCIE_DEV_ID_1_EP3_REG 0x0e8 +#define PCIE_CC_REV_ID_1_EP3_REG 0x0ec +#define PCIE_DEV_ID_2_EP3_REG 0x0f0 +#define PCIE_CC_REV_ID_2_EP3_REG 0x0f4 +#define PCIE_DEV_ID_3_EP3_REG 0x0f8 +#define PCIE_CC_REV_ID_3_EP3_REG 0x0fc +#define PCIE_DEV_ID_4_EP3_REG 0x100 +#define PCIE_CC_REV_ID_4_EP3_REG 0x104 +#define PCIE_DEV_ID_5_EP3_REG 0x108 +#define PCIE_CC_REV_ID_5_EP3_REG 0x10c +#define PCIE_DEV_ID_6_EP3_REG 0x110 +#define PCIE_CC_REV_ID_6_EP3_REG 0x114 +#define PCIE_DEV_ID_7_EP3_REG 0x118 +#define PCIE_CC_REV_ID_7_EP3_REG 0x11c +#define PCIE_DEV_ID_0_EP4_REG 0x120 +#define PCIE_CC_REV_ID_0_EP4_REG 0x124 +#define PCIE_DEV_ID_1_EP4_REG 0x128 +#define PCIE_CC_REV_ID_1_EP4_REG 0x12c +#define PCIE_DEV_ID_2_EP4_REG 0x130 +#define PCIE_CC_REV_ID_2_EP4_REG 0x134 +#define PCIE_DEV_ID_3_EP4_REG 0x138 +#define PCIE_CC_REV_ID_3_EP4_REG 0x13c +#define PCIE_DEV_ID_4_EP4_REG 0x140 +#define PCIE_CC_REV_ID_4_EP4_REG 0x144 +#define PCIE_DEV_ID_5_EP4_REG 0x148 +#define PCIE_CC_REV_ID_5_EP4_REG 0x14c +#define PCIE_DEV_ID_6_EP4_REG 0x150 +#define PCIE_CC_REV_ID_6_EP4_REG 0x154 +#define PCIE_DEV_ID_7_EP4_REG 0x158 +#define PCIE_CC_REV_ID_7_EP4_REG 0x15c +#define PCIE_SUBSYS_VEN_ID_REG 0x160 +#define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164 +#define PCIE_MIPHYP_SSC_EN_REG 0x168 +#define PCIE_MIPHYP_ADDR_REG 0x16c +#define PCIE_L1_ASPM_READY_REG 0x170 +#define PCIE_EXT_CFG_RDY_REG 0x174 +#define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178 +#define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c +#define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180 +#define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184 +#define DMA_IP_CTRL_REG 0x324 +#define DISP_BRIDGE_PU_PD_CTRL_REG 0x328 +#define VIP_PU_PD_CTRL_REG 0x32c +#define USB_MLB_PU_PD_CTRL_REG 0x330 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338 +#define UART_PU_PD_CTRL_REG 0x33c +#define ARM_Lock 0x340 +#define SYS_IO_CHAR_REG1 0x344 +#define SYS_IO_CHAR_REG2 0x348 +#define SATA_CORE_ID_REG 0x34c +#define SATA_CTRL_REG 0x350 +#define I2C_HSFIX_MISC_REG 0x354 +#define SPARE2_RESERVED 0x358 +#define SPARE3_RESERVED 0x35c +#define MASTER_LOCK_REG 0x368 +#define SYSTEM_CONFIG_STATUS_REG 0x36c +#define MSP_CLK_CTRL_REG 0x39c +#define COMPENSATION_REG1 0x3c4 +#define COMPENSATION_REG2 0x3c8 +#define COMPENSATION_REG3 0x3cc +#define TEST_CTL_REG 0x3d0 + +/* + * SECR (OTP) registers + */ +#define STA2X11_SECR_CR 0x00 +#define STA2X11_SECR_FVR0 0x10 +#define STA2X11_SECR_FVR1 0x14 + +extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev, + enum sta2x11_mfd_plat_dev index, + void __iomem **regs, + spinlock_t **lock); + #endif /* __STA2X11_MFD_H */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index f8d5b4d5843f..383ac1512a39 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -62,6 +62,7 @@ struct stmpe_client_info; * @lock: lock protecting I/O operations * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() + * @irq_domain: IRQ domain * @client: client - i2c or spi * @ci: client specific information * @partnum: part number @@ -79,6 +80,7 @@ struct stmpe { struct mutex lock; struct mutex irq_lock; struct device *dev; + struct irq_domain *domain; void *client; struct stmpe_client_info *ci; enum stmpe_partnum partnum; @@ -188,7 +190,6 @@ struct stmpe_ts_platform_data { * @id: device id to distinguish between multiple STMPEs on the same board * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) * @irq_trigger: IRQ trigger to use for the interrupt to the host - * @irq_invert_polarity: IRQ line is connected with reversed polarity * @autosleep: bool to enable/disable stmpe autosleep * @autosleep_timeout: inactivity timeout in milliseconds for autosleep * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or @@ -205,7 +206,6 @@ struct stmpe_platform_data { unsigned int blocks; int irq_base; unsigned int irq_trigger; - bool irq_invert_polarity; bool autosleep; bool irq_over_gpio; int irq_gpio; diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h new file mode 100644 index 000000000000..c79ad5d2f271 --- /dev/null +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -0,0 +1,152 @@ +#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H +#define __LINUX_TI_AM335X_TSCADC_MFD_H + +/* + * TI Touch Screen / ADC MFD driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mfd/core.h> + +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQCLR 0x030 +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO0THR 0xE8 +#define REG_FIFO1CNT 0xF0 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +/* IRQ wakeup enable */ +#define IRQWKUP_ENB BIT(0) + +/* Step Enable */ +#define STEPENB_MASK (0x1FFFF << 0) +#define STEPENB(val) ((val) << 0) +#define STPENB_STEPENB STEPENB(0x1FFFF) +#define STPENB_STEPENB_TC STEPENB(0x1FFF) + +/* IRQ enable */ +#define IRQENB_HW_PEN BIT(0) +#define IRQENB_FIFO0THRES BIT(2) +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) + +/* Step Configuration */ +#define STEPCONFIG_MODE_MASK (3 << 0) +#define STEPCONFIG_MODE(val) ((val) << 0) +#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) +#define STEPCONFIG_AVG_MASK (7 << 2) +#define STEPCONFIG_AVG(val) ((val) << 2) +#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) +#define STEPCONFIG_XPP BIT(5) +#define STEPCONFIG_XNN BIT(6) +#define STEPCONFIG_YPP BIT(7) +#define STEPCONFIG_YNN BIT(8) +#define STEPCONFIG_XNP BIT(9) +#define STEPCONFIG_YPN BIT(10) +#define STEPCONFIG_INM_MASK (0xF << 15) +#define STEPCONFIG_INM(val) ((val) << 15) +#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) +#define STEPCONFIG_INP_MASK (0xF << 19) +#define STEPCONFIG_INP(val) ((val) << 19) +#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) +#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) +#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) +#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) +#define STEPCONFIG_FIFO1 BIT(26) + +/* Delay register */ +#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) +#define STEPDELAY_OPEN(val) ((val) << 0) +#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) +#define STEPDELAY_SAMPLE_MASK (0xFF << 24) +#define STEPDELAY_SAMPLE(val) ((val) << 24) +#define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0) + +/* Charge Config */ +#define STEPCHARGE_RFP_MASK (7 << 12) +#define STEPCHARGE_RFP(val) ((val) << 12) +#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) +#define STEPCHARGE_INM_MASK (0xF << 15) +#define STEPCHARGE_INM(val) ((val) << 15) +#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) +#define STEPCHARGE_INP_MASK (0xF << 19) +#define STEPCHARGE_INP(val) ((val) << 19) +#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) +#define STEPCHARGE_RFM_MASK (3 << 23) +#define STEPCHARGE_RFM(val) ((val) << 23) +#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) + +/* Charge delay */ +#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) +#define CHARGEDLY_OPEN(val) ((val) << 0) +#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) + +/* Control register */ +#define CNTRLREG_TSCSSENB BIT(0) +#define CNTRLREG_STEPID BIT(1) +#define CNTRLREG_STEPCONFIGWRT BIT(2) +#define CNTRLREG_POWERDOWN BIT(4) +#define CNTRLREG_AFE_CTRL_MASK (3 << 5) +#define CNTRLREG_AFE_CTRL(val) ((val) << 5) +#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) +#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) +#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) +#define CNTRLREG_TSCENB BIT(7) + +#define ADC_CLK 3000000 +#define MAX_CLK_DIV 7 +#define TOTAL_STEPS 16 +#define TOTAL_CHANNELS 8 + +#define TSCADC_CELLS 2 + +enum tscadc_cells { + TSC_CELL, + ADC_CELL, +}; + +struct mfd_tscadc_board { + struct tsc_data *tsc_init; + struct adc_data *adc_init; +}; + +struct ti_tscadc_dev { + struct device *dev; + struct regmap *regmap_tscadc; + void __iomem *tscadc_base; + int irq; + struct mfd_cell cells[TSCADC_CELLS]; + + /* tsc device */ + struct titsc *tsc; + + /* adc device */ + struct adc_device *adc; +}; + +#endif diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 804e280c1e1d..6694cf43e8b8 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -23,6 +23,26 @@ #define __LINUX_MFD_TPS65090_H #include <linux/irq.h> +#include <linux/regmap.h> + +/* TPS65090 IRQs */ +enum { + TPS65090_IRQ_VAC_STATUS_CHANGE, + TPS65090_IRQ_VSYS_STATUS_CHANGE, + TPS65090_IRQ_BAT_STATUS_CHANGE, + TPS65090_IRQ_CHARGING_STATUS_CHANGE, + TPS65090_IRQ_CHARGING_COMPLETE, + TPS65090_IRQ_OVERLOAD_DCDC1, + TPS65090_IRQ_OVERLOAD_DCDC2, + TPS65090_IRQ_OVERLOAD_DCDC3, + TPS65090_IRQ_OVERLOAD_FET1, + TPS65090_IRQ_OVERLOAD_FET2, + TPS65090_IRQ_OVERLOAD_FET3, + TPS65090_IRQ_OVERLOAD_FET4, + TPS65090_IRQ_OVERLOAD_FET5, + TPS65090_IRQ_OVERLOAD_FET6, + TPS65090_IRQ_OVERLOAD_FET7, +}; /* TPS65090 Regulator ID */ enum { @@ -44,20 +64,9 @@ enum { }; struct tps65090 { - struct mutex lock; struct device *dev; - struct i2c_client *client; struct regmap *rmap; - struct irq_chip irq_chip; - struct mutex irq_lock; - int irq_base; - unsigned int id; -}; - -struct tps65090_subdev_info { - int id; - const char *name; - void *platform_data; + struct regmap_irq_chip_data *irq_data; }; /* @@ -77,8 +86,6 @@ struct tps65090_regulator_plat_data { struct tps65090_platform_data { int irq_base; - int num_subdevs; - struct tps65090_subdev_info *subdevs; struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX]; }; @@ -86,9 +93,39 @@ struct tps65090_platform_data { * NOTE: the functions below are not intended for use outside * of the TPS65090 sub-device drivers */ -extern int tps65090_write(struct device *dev, int reg, uint8_t val); -extern int tps65090_read(struct device *dev, int reg, uint8_t *val); -extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num); -extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num); +static inline int tps65090_write(struct device *dev, int reg, uint8_t val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_write(tps->rmap, reg, val); +} + +static inline int tps65090_read(struct device *dev, int reg, uint8_t *val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + unsigned int temp_val; + int ret; + + ret = regmap_read(tps->rmap, reg, &temp_val); + if (!ret) + *val = temp_val; + return ret; +} + +static inline int tps65090_set_bits(struct device *dev, int reg, + uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), ~0u); +} + +static inline int tps65090_clr_bits(struct device *dev, int reg, + uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), 0u); +} #endif /*__LINUX_MFD_TPS65090_H */ diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index f8da0e152567..87994542573b 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -96,5 +96,6 @@ extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask); +extern int tps6586x_irq_get_virq(struct device *dev, int irq); #endif /*__LINUX_MFD_TPS6586X_H */ diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 02e894f3ff45..20e433e551e3 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -572,6 +572,49 @@ #define SPARE_SPARE_MASK 0xFF #define SPARE_SPARE_SHIFT 0 +#define TPS65910_INT_STS_RTC_PERIOD_IT_MASK 0x80 +#define TPS65910_INT_STS_RTC_PERIOD_IT_SHIFT 7 +#define TPS65910_INT_STS_RTC_ALARM_IT_MASK 0x40 +#define TPS65910_INT_STS_RTC_ALARM_IT_SHIFT 6 +#define TPS65910_INT_STS_HOTDIE_IT_MASK 0x20 +#define TPS65910_INT_STS_HOTDIE_IT_SHIFT 5 +#define TPS65910_INT_STS_PWRHOLD_F_IT_MASK 0x10 +#define TPS65910_INT_STS_PWRHOLD_F_IT_SHIFT 4 +#define TPS65910_INT_STS_PWRON_LP_IT_MASK 0x08 +#define TPS65910_INT_STS_PWRON_LP_IT_SHIFT 3 +#define TPS65910_INT_STS_PWRON_IT_MASK 0x04 +#define TPS65910_INT_STS_PWRON_IT_SHIFT 2 +#define TPS65910_INT_STS_VMBHI_IT_MASK 0x02 +#define TPS65910_INT_STS_VMBHI_IT_SHIFT 1 +#define TPS65910_INT_STS_VMBDCH_IT_MASK 0x01 +#define TPS65910_INT_STS_VMBDCH_IT_SHIFT 0 + +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_MASK 0x80 +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_SHIFT 7 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_MASK 0x40 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_MASK 0x20 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_SHIFT 5 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 +#define TPS65910_INT_MSK_PWRON_IT_MSK_MASK 0x04 +#define TPS65910_INT_MSK_PWRON_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_MASK 0x01 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_SHIFT 0 + +#define TPS65910_INT_STS2_GPIO0_F_IT_SHIFT 2 +#define TPS65910_INT_STS2_GPIO0_F_IT_MASK 0x02 +#define TPS65910_INT_STS2_GPIO0_R_IT_SHIFT 1 +#define TPS65910_INT_STS2_GPIO0_R_IT_MASK 0x01 + +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_MASK 0x01 /*Register INT_STS (0x80) register.RegisterDescription */ #define INT_STS_RTC_PERIOD_IT_MASK 0x80 @@ -580,16 +623,16 @@ #define INT_STS_RTC_ALARM_IT_SHIFT 6 #define INT_STS_HOTDIE_IT_MASK 0x20 #define INT_STS_HOTDIE_IT_SHIFT 5 -#define INT_STS_PWRHOLD_IT_MASK 0x10 -#define INT_STS_PWRHOLD_IT_SHIFT 4 +#define INT_STS_PWRHOLD_R_IT_MASK 0x10 +#define INT_STS_PWRHOLD_R_IT_SHIFT 4 #define INT_STS_PWRON_LP_IT_MASK 0x08 #define INT_STS_PWRON_LP_IT_SHIFT 3 #define INT_STS_PWRON_IT_MASK 0x04 #define INT_STS_PWRON_IT_SHIFT 2 #define INT_STS_VMBHI_IT_MASK 0x02 #define INT_STS_VMBHI_IT_SHIFT 1 -#define INT_STS_VMBDCH_IT_MASK 0x01 -#define INT_STS_VMBDCH_IT_SHIFT 0 +#define INT_STS_PWRHOLD_F_IT_MASK 0x01 +#define INT_STS_PWRHOLD_F_IT_SHIFT 0 /*Register INT_MSK (0x80) register.RegisterDescription */ @@ -599,16 +642,16 @@ #define INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 #define INT_MSK_HOTDIE_IT_MSK_MASK 0x20 #define INT_MSK_HOTDIE_IT_MSK_SHIFT 5 -#define INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 -#define INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define INT_MSK_PWRHOLD_R_IT_MSK_MASK 0x10 +#define INT_MSK_PWRHOLD_R_IT_MSK_SHIFT 4 #define INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 #define INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 #define INT_MSK_PWRON_IT_MSK_MASK 0x04 #define INT_MSK_PWRON_IT_MSK_SHIFT 2 #define INT_MSK_VMBHI_IT_MSK_MASK 0x02 #define INT_MSK_VMBHI_IT_MSK_SHIFT 1 -#define INT_MSK_VMBDCH_IT_MSK_MASK 0x01 -#define INT_MSK_VMBDCH_IT_MSK_SHIFT 0 +#define INT_MSK_PWRHOLD_F_IT_MSK_MASK 0x01 +#define INT_MSK_PWRHOLD_F_IT_MSK_SHIFT 0 /*Register INT_STS2 (0x80) register.RegisterDescription */ @@ -650,6 +693,14 @@ /*Register INT_STS3 (0x80) register.RegisterDescription */ +#define INT_STS3_PWRDN_IT_MASK 0x80 +#define INT_STS3_PWRDN_IT_SHIFT 7 +#define INT_STS3_VMBCH2_L_IT_MASK 0x40 +#define INT_STS3_VMBCH2_L_IT_SHIFT 6 +#define INT_STS3_VMBCH2_H_IT_MASK 0x20 +#define INT_STS3_VMBCH2_H_IT_SHIFT 5 +#define INT_STS3_WTCHDG_IT_MASK 0x10 +#define INT_STS3_WTCHDG_IT_SHIFT 4 #define INT_STS3_GPIO5_F_IT_MASK 0x08 #define INT_STS3_GPIO5_F_IT_SHIFT 3 #define INT_STS3_GPIO5_R_IT_MASK 0x04 @@ -661,6 +712,14 @@ /*Register INT_MSK3 (0x80) register.RegisterDescription */ +#define INT_MSK3_PWRDN_IT_MSK_MASK 0x80 +#define INT_MSK3_PWRDN_IT_MSK_SHIFT 7 +#define INT_MSK3_VMBCH2_L_IT_MSK_MASK 0x40 +#define INT_MSK3_VMBCH2_L_IT_MSK_SHIFT 6 +#define INT_MSK3_VMBCH2_H_IT_MSK_MASK 0x20 +#define INT_MSK3_VMBCH2_H_IT_MSK_SHIFT 5 +#define INT_MSK3_WTCHDG_IT_MSK_MASK 0x10 +#define INT_MSK3_WTCHDG_IT_MSK_SHIFT 4 #define INT_MSK3_GPIO5_F_IT_MSK_MASK 0x08 #define INT_MSK3_GPIO5_F_IT_MSK_SHIFT 3 #define INT_MSK3_GPIO5_R_IT_MSK_MASK 0x04 @@ -721,34 +780,32 @@ #define TPS65910_IRQ_GPIO_F 9 #define TPS65910_NUM_IRQ 10 -#define TPS65911_IRQ_VBAT_VMBDCH 0 -#define TPS65911_IRQ_VBAT_VMBDCH2L 1 -#define TPS65911_IRQ_VBAT_VMBDCH2H 2 -#define TPS65911_IRQ_VBAT_VMHI 3 -#define TPS65911_IRQ_PWRON 4 -#define TPS65911_IRQ_PWRON_LP 5 -#define TPS65911_IRQ_PWRHOLD_F 6 -#define TPS65911_IRQ_PWRHOLD_R 7 -#define TPS65911_IRQ_HOTDIE 8 -#define TPS65911_IRQ_RTC_ALARM 9 -#define TPS65911_IRQ_RTC_PERIOD 10 -#define TPS65911_IRQ_GPIO0_R 11 -#define TPS65911_IRQ_GPIO0_F 12 -#define TPS65911_IRQ_GPIO1_R 13 -#define TPS65911_IRQ_GPIO1_F 14 -#define TPS65911_IRQ_GPIO2_R 15 -#define TPS65911_IRQ_GPIO2_F 16 -#define TPS65911_IRQ_GPIO3_R 17 -#define TPS65911_IRQ_GPIO3_F 18 -#define TPS65911_IRQ_GPIO4_R 19 -#define TPS65911_IRQ_GPIO4_F 20 -#define TPS65911_IRQ_GPIO5_R 21 -#define TPS65911_IRQ_GPIO5_F 22 -#define TPS65911_IRQ_WTCHDG 23 -#define TPS65911_IRQ_PWRDN 24 - -#define TPS65911_NUM_IRQ 25 - +#define TPS65911_IRQ_PWRHOLD_F 0 +#define TPS65911_IRQ_VBAT_VMHI 1 +#define TPS65911_IRQ_PWRON 2 +#define TPS65911_IRQ_PWRON_LP 3 +#define TPS65911_IRQ_PWRHOLD_R 4 +#define TPS65911_IRQ_HOTDIE 5 +#define TPS65911_IRQ_RTC_ALARM 6 +#define TPS65911_IRQ_RTC_PERIOD 7 +#define TPS65911_IRQ_GPIO0_R 8 +#define TPS65911_IRQ_GPIO0_F 9 +#define TPS65911_IRQ_GPIO1_R 10 +#define TPS65911_IRQ_GPIO1_F 11 +#define TPS65911_IRQ_GPIO2_R 12 +#define TPS65911_IRQ_GPIO2_F 13 +#define TPS65911_IRQ_GPIO3_R 14 +#define TPS65911_IRQ_GPIO3_F 15 +#define TPS65911_IRQ_GPIO4_R 16 +#define TPS65911_IRQ_GPIO4_F 17 +#define TPS65911_IRQ_GPIO5_R 18 +#define TPS65911_IRQ_GPIO5_F 19 +#define TPS65911_IRQ_WTCHDG 20 +#define TPS65911_IRQ_VMBCH2_H 21 +#define TPS65911_IRQ_VMBCH2_L 22 +#define TPS65911_IRQ_PWRDN 23 + +#define TPS65911_NUM_IRQ 24 /* GPIO Register Definitions */ #define TPS65910_GPIO_DEB BIT(2) @@ -836,7 +893,6 @@ struct tps65910 { struct device *dev; struct i2c_client *i2c_client; struct regmap *regmap; - struct mutex io_mutex; unsigned int id; /* Client devices */ @@ -848,12 +904,8 @@ struct tps65910 { struct tps65910_board *of_plat_data; /* IRQ Handling */ - struct mutex irq_lock; int chip_irq; - int irq_base; - int irq_num; - u32 irq_mask; - struct irq_domain *domain; + struct regmap_irq_chip_data *irq_data; }; struct tps65910_platform_data { @@ -861,10 +913,6 @@ struct tps65910_platform_data { int irq_base; }; -int tps65910_irq_init(struct tps65910 *tps65910, int irq, - struct tps65910_platform_data *pdata); -int tps65910_irq_exit(struct tps65910 *tps65910); - static inline int tps65910_chip_id(struct tps65910 *tps65910) { return tps65910->id; @@ -900,4 +948,9 @@ static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg, return regmap_update_bits(tps65910->regmap, reg, mask, val); } +static inline int tps65910_irq_get_virq(struct tps65910 *tps65910, int irq) +{ + return regmap_irq_get_virq(tps65910->irq_data, irq); +} + #endif /* __LINUX_MFD_TPS65910_H */ diff --git a/include/linux/mfd/tps80031.h b/include/linux/mfd/tps80031.h new file mode 100644 index 000000000000..2c75c9c9318f --- /dev/null +++ b/include/linux/mfd/tps80031.h @@ -0,0 +1,637 @@ +/* + * tps80031.h -- TI TPS80031 and TI TPS80032 PMIC driver. + * + * Copyright (c) 2012, NVIDIA Corporation. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ + +#ifndef __LINUX_MFD_TPS80031_H +#define __LINUX_MFD_TPS80031_H + +#include <linux/device.h> +#include <linux/regmap.h> + +/* Pull-ups/Pull-downs */ +#define TPS80031_CFG_INPUT_PUPD1 0xF0 +#define TPS80031_CFG_INPUT_PUPD2 0xF1 +#define TPS80031_CFG_INPUT_PUPD3 0xF2 +#define TPS80031_CFG_INPUT_PUPD4 0xF3 +#define TPS80031_CFG_LDO_PD1 0xF4 +#define TPS80031_CFG_LDO_PD2 0xF5 +#define TPS80031_CFG_SMPS_PD 0xF6 + +/* Real Time Clock */ +#define TPS80031_SECONDS_REG 0x00 +#define TPS80031_MINUTES_REG 0x01 +#define TPS80031_HOURS_REG 0x02 +#define TPS80031_DAYS_REG 0x03 +#define TPS80031_MONTHS_REG 0x04 +#define TPS80031_YEARS_REG 0x05 +#define TPS80031_WEEKS_REG 0x06 +#define TPS80031_ALARM_SECONDS_REG 0x08 +#define TPS80031_ALARM_MINUTES_REG 0x09 +#define TPS80031_ALARM_HOURS_REG 0x0A +#define TPS80031_ALARM_DAYS_REG 0x0B +#define TPS80031_ALARM_MONTHS_REG 0x0C +#define TPS80031_ALARM_YEARS_REG 0x0D +#define TPS80031_RTC_CTRL_REG 0x10 +#define TPS80031_RTC_STATUS_REG 0x11 +#define TPS80031_RTC_INTERRUPTS_REG 0x12 +#define TPS80031_RTC_COMP_LSB_REG 0x13 +#define TPS80031_RTC_COMP_MSB_REG 0x14 +#define TPS80031_RTC_RESET_STATUS_REG 0x16 + +/*PMC Master Module */ +#define TPS80031_PHOENIX_START_CONDITION 0x1F +#define TPS80031_PHOENIX_MSK_TRANSITION 0x20 +#define TPS80031_STS_HW_CONDITIONS 0x21 +#define TPS80031_PHOENIX_LAST_TURNOFF_STS 0x22 +#define TPS80031_VSYSMIN_LO_THRESHOLD 0x23 +#define TPS80031_VSYSMIN_HI_THRESHOLD 0x24 +#define TPS80031_PHOENIX_DEV_ON 0x25 +#define TPS80031_STS_PWR_GRP_STATE 0x27 +#define TPS80031_PH_CFG_VSYSLOW 0x28 +#define TPS80031_PH_STS_BOOT 0x29 +#define TPS80031_PHOENIX_SENS_TRANSITION 0x2A +#define TPS80031_PHOENIX_SEQ_CFG 0x2B +#define TPS80031_PRIMARY_WATCHDOG_CFG 0X2C +#define TPS80031_KEY_PRESS_DUR_CFG 0X2D +#define TPS80031_SMPS_LDO_SHORT_STS 0x2E + +/* PMC Slave Module - Broadcast */ +#define TPS80031_BROADCAST_ADDR_ALL 0x31 +#define TPS80031_BROADCAST_ADDR_REF 0x32 +#define TPS80031_BROADCAST_ADDR_PROV 0x33 +#define TPS80031_BROADCAST_ADDR_CLK_RST 0x34 + +/* PMC Slave Module SMPS Regulators */ +#define TPS80031_SMPS4_CFG_TRANS 0x41 +#define TPS80031_SMPS4_CFG_STATE 0x42 +#define TPS80031_SMPS4_CFG_VOLTAGE 0x44 +#define TPS80031_VIO_CFG_TRANS 0x47 +#define TPS80031_VIO_CFG_STATE 0x48 +#define TPS80031_VIO_CFG_FORCE 0x49 +#define TPS80031_VIO_CFG_VOLTAGE 0x4A +#define TPS80031_VIO_CFG_STEP 0x48 +#define TPS80031_SMPS1_CFG_TRANS 0x53 +#define TPS80031_SMPS1_CFG_STATE 0x54 +#define TPS80031_SMPS1_CFG_FORCE 0x55 +#define TPS80031_SMPS1_CFG_VOLTAGE 0x56 +#define TPS80031_SMPS1_CFG_STEP 0x57 +#define TPS80031_SMPS2_CFG_TRANS 0x59 +#define TPS80031_SMPS2_CFG_STATE 0x5A +#define TPS80031_SMPS2_CFG_FORCE 0x5B +#define TPS80031_SMPS2_CFG_VOLTAGE 0x5C +#define TPS80031_SMPS2_CFG_STEP 0x5D +#define TPS80031_SMPS3_CFG_TRANS 0x65 +#define TPS80031_SMPS3_CFG_STATE 0x66 +#define TPS80031_SMPS3_CFG_VOLTAGE 0x68 + +/* PMC Slave Module LDO Regulators */ +#define TPS80031_VANA_CFG_TRANS 0x81 +#define TPS80031_VANA_CFG_STATE 0x82 +#define TPS80031_VANA_CFG_VOLTAGE 0x83 +#define TPS80031_LDO2_CFG_TRANS 0x85 +#define TPS80031_LDO2_CFG_STATE 0x86 +#define TPS80031_LDO2_CFG_VOLTAGE 0x87 +#define TPS80031_LDO4_CFG_TRANS 0x89 +#define TPS80031_LDO4_CFG_STATE 0x8A +#define TPS80031_LDO4_CFG_VOLTAGE 0x8B +#define TPS80031_LDO3_CFG_TRANS 0x8D +#define TPS80031_LDO3_CFG_STATE 0x8E +#define TPS80031_LDO3_CFG_VOLTAGE 0x8F +#define TPS80031_LDO6_CFG_TRANS 0x91 +#define TPS80031_LDO6_CFG_STATE 0x92 +#define TPS80031_LDO6_CFG_VOLTAGE 0x93 +#define TPS80031_LDOLN_CFG_TRANS 0x95 +#define TPS80031_LDOLN_CFG_STATE 0x96 +#define TPS80031_LDOLN_CFG_VOLTAGE 0x97 +#define TPS80031_LDO5_CFG_TRANS 0x99 +#define TPS80031_LDO5_CFG_STATE 0x9A +#define TPS80031_LDO5_CFG_VOLTAGE 0x9B +#define TPS80031_LDO1_CFG_TRANS 0x9D +#define TPS80031_LDO1_CFG_STATE 0x9E +#define TPS80031_LDO1_CFG_VOLTAGE 0x9F +#define TPS80031_LDOUSB_CFG_TRANS 0xA1 +#define TPS80031_LDOUSB_CFG_STATE 0xA2 +#define TPS80031_LDOUSB_CFG_VOLTAGE 0xA3 +#define TPS80031_LDO7_CFG_TRANS 0xA5 +#define TPS80031_LDO7_CFG_STATE 0xA6 +#define TPS80031_LDO7_CFG_VOLTAGE 0xA7 + +/* PMC Slave Module External Control */ +#define TPS80031_REGEN1_CFG_TRANS 0xAE +#define TPS80031_REGEN1_CFG_STATE 0xAF +#define TPS80031_REGEN2_CFG_TRANS 0xB1 +#define TPS80031_REGEN2_CFG_STATE 0xB2 +#define TPS80031_SYSEN_CFG_TRANS 0xB4 +#define TPS80031_SYSEN_CFG_STATE 0xB5 + +/* PMC Slave Module Internal Control */ +#define TPS80031_NRESPWRON_CFG_TRANS 0xB7 +#define TPS80031_NRESPWRON_CFG_STATE 0xB8 +#define TPS80031_CLK32KAO_CFG_TRANS 0xBA +#define TPS80031_CLK32KAO_CFG_STATE 0xBB +#define TPS80031_CLK32KG_CFG_TRANS 0xBD +#define TPS80031_CLK32KG_CFG_STATE 0xBE +#define TPS80031_CLK32KAUDIO_CFG_TRANS 0xC0 +#define TPS80031_CLK32KAUDIO_CFG_STATE 0xC1 +#define TPS80031_VRTC_CFG_TRANS 0xC3 +#define TPS80031_VRTC_CFG_STATE 0xC4 +#define TPS80031_BIAS_CFG_TRANS 0xC6 +#define TPS80031_BIAS_CFG_STATE 0xC7 +#define TPS80031_VSYSMIN_HI_CFG_TRANS 0xC9 +#define TPS80031_VSYSMIN_HI_CFG_STATE 0xCA +#define TPS80031_RC6MHZ_CFG_TRANS 0xCC +#define TPS80031_RC6MHZ_CFG_STATE 0xCD +#define TPS80031_TMP_CFG_TRANS 0xCF +#define TPS80031_TMP_CFG_STATE 0xD0 + +/* PMC Slave Module resources assignment */ +#define TPS80031_PREQ1_RES_ASS_A 0xD7 +#define TPS80031_PREQ1_RES_ASS_B 0xD8 +#define TPS80031_PREQ1_RES_ASS_C 0xD9 +#define TPS80031_PREQ2_RES_ASS_A 0xDA +#define TPS80031_PREQ2_RES_ASS_B 0xDB +#define TPS80031_PREQ2_RES_ASS_C 0xDC +#define TPS80031_PREQ3_RES_ASS_A 0xDD +#define TPS80031_PREQ3_RES_ASS_B 0xDE +#define TPS80031_PREQ3_RES_ASS_C 0xDF + +/* PMC Slave Module Miscellaneous */ +#define TPS80031_SMPS_OFFSET 0xE0 +#define TPS80031_SMPS_MULT 0xE3 +#define TPS80031_MISC1 0xE4 +#define TPS80031_MISC2 0xE5 +#define TPS80031_BBSPOR_CFG 0xE6 +#define TPS80031_TMP_CFG 0xE7 + +/* Battery Charging Controller and Indicator LED */ +#define TPS80031_CONTROLLER_CTRL2 0xDA +#define TPS80031_CONTROLLER_VSEL_COMP 0xDB +#define TPS80031_CHARGERUSB_VSYSREG 0xDC +#define TPS80031_CHARGERUSB_VICHRG_PC 0xDD +#define TPS80031_LINEAR_CHRG_STS 0xDE +#define TPS80031_CONTROLLER_INT_MASK 0xE0 +#define TPS80031_CONTROLLER_CTRL1 0xE1 +#define TPS80031_CONTROLLER_WDG 0xE2 +#define TPS80031_CONTROLLER_STAT1 0xE3 +#define TPS80031_CHARGERUSB_INT_STATUS 0xE4 +#define TPS80031_CHARGERUSB_INT_MASK 0xE5 +#define TPS80031_CHARGERUSB_STATUS_INT1 0xE6 +#define TPS80031_CHARGERUSB_STATUS_INT2 0xE7 +#define TPS80031_CHARGERUSB_CTRL1 0xE8 +#define TPS80031_CHARGERUSB_CTRL2 0xE9 +#define TPS80031_CHARGERUSB_CTRL3 0xEA +#define TPS80031_CHARGERUSB_STAT1 0xEB +#define TPS80031_CHARGERUSB_VOREG 0xEC +#define TPS80031_CHARGERUSB_VICHRG 0xED +#define TPS80031_CHARGERUSB_CINLIMIT 0xEE +#define TPS80031_CHARGERUSB_CTRLLIMIT1 0xEF +#define TPS80031_CHARGERUSB_CTRLLIMIT2 0xF0 +#define TPS80031_LED_PWM_CTRL1 0xF4 +#define TPS80031_LED_PWM_CTRL2 0xF5 + +/* USB On-The-Go */ +#define TPS80031_BACKUP_REG 0xFA +#define TPS80031_USB_VENDOR_ID_LSB 0x00 +#define TPS80031_USB_VENDOR_ID_MSB 0x01 +#define TPS80031_USB_PRODUCT_ID_LSB 0x02 +#define TPS80031_USB_PRODUCT_ID_MSB 0x03 +#define TPS80031_USB_VBUS_CTRL_SET 0x04 +#define TPS80031_USB_VBUS_CTRL_CLR 0x05 +#define TPS80031_USB_ID_CTRL_SET 0x06 +#define TPS80031_USB_ID_CTRL_CLR 0x07 +#define TPS80031_USB_VBUS_INT_SRC 0x08 +#define TPS80031_USB_VBUS_INT_LATCH_SET 0x09 +#define TPS80031_USB_VBUS_INT_LATCH_CLR 0x0A +#define TPS80031_USB_VBUS_INT_EN_LO_SET 0x0B +#define TPS80031_USB_VBUS_INT_EN_LO_CLR 0x0C +#define TPS80031_USB_VBUS_INT_EN_HI_SET 0x0D +#define TPS80031_USB_VBUS_INT_EN_HI_CLR 0x0E +#define TPS80031_USB_ID_INT_SRC 0x0F +#define TPS80031_USB_ID_INT_LATCH_SET 0x10 +#define TPS80031_USB_ID_INT_LATCH_CLR 0x11 +#define TPS80031_USB_ID_INT_EN_LO_SET 0x12 +#define TPS80031_USB_ID_INT_EN_LO_CLR 0x13 +#define TPS80031_USB_ID_INT_EN_HI_SET 0x14 +#define TPS80031_USB_ID_INT_EN_HI_CLR 0x15 +#define TPS80031_USB_OTG_ADP_CTRL 0x16 +#define TPS80031_USB_OTG_ADP_HIGH 0x17 +#define TPS80031_USB_OTG_ADP_LOW 0x18 +#define TPS80031_USB_OTG_ADP_RISE 0x19 +#define TPS80031_USB_OTG_REVISION 0x1A + +/* Gas Gauge */ +#define TPS80031_FG_REG_00 0xC0 +#define TPS80031_FG_REG_01 0xC1 +#define TPS80031_FG_REG_02 0xC2 +#define TPS80031_FG_REG_03 0xC3 +#define TPS80031_FG_REG_04 0xC4 +#define TPS80031_FG_REG_05 0xC5 +#define TPS80031_FG_REG_06 0xC6 +#define TPS80031_FG_REG_07 0xC7 +#define TPS80031_FG_REG_08 0xC8 +#define TPS80031_FG_REG_09 0xC9 +#define TPS80031_FG_REG_10 0xCA +#define TPS80031_FG_REG_11 0xCB + +/* General Purpose ADC */ +#define TPS80031_GPADC_CTRL 0x2E +#define TPS80031_GPADC_CTRL2 0x2F +#define TPS80031_RTSELECT_LSB 0x32 +#define TPS80031_RTSELECT_ISB 0x33 +#define TPS80031_RTSELECT_MSB 0x34 +#define TPS80031_GPSELECT_ISB 0x35 +#define TPS80031_CTRL_P1 0x36 +#define TPS80031_RTCH0_LSB 0x37 +#define TPS80031_RTCH0_MSB 0x38 +#define TPS80031_RTCH1_LSB 0x39 +#define TPS80031_RTCH1_MSB 0x3A +#define TPS80031_GPCH0_LSB 0x3B +#define TPS80031_GPCH0_MSB 0x3C + +/* SIM, MMC and Battery Detection */ +#define TPS80031_SIMDEBOUNCING 0xEB +#define TPS80031_SIMCTRL 0xEC +#define TPS80031_MMCDEBOUNCING 0xED +#define TPS80031_MMCCTRL 0xEE +#define TPS80031_BATDEBOUNCING 0xEF + +/* Vibrator Driver and PWMs */ +#define TPS80031_VIBCTRL 0x9B +#define TPS80031_VIBMODE 0x9C +#define TPS80031_PWM1ON 0xBA +#define TPS80031_PWM1OFF 0xBB +#define TPS80031_PWM2ON 0xBD +#define TPS80031_PWM2OFF 0xBE + +/* Control Interface */ +#define TPS80031_INT_STS_A 0xD0 +#define TPS80031_INT_STS_B 0xD1 +#define TPS80031_INT_STS_C 0xD2 +#define TPS80031_INT_MSK_LINE_A 0xD3 +#define TPS80031_INT_MSK_LINE_B 0xD4 +#define TPS80031_INT_MSK_LINE_C 0xD5 +#define TPS80031_INT_MSK_STS_A 0xD6 +#define TPS80031_INT_MSK_STS_B 0xD7 +#define TPS80031_INT_MSK_STS_C 0xD8 +#define TPS80031_TOGGLE1 0x90 +#define TPS80031_TOGGLE2 0x91 +#define TPS80031_TOGGLE3 0x92 +#define TPS80031_PWDNSTATUS1 0x93 +#define TPS80031_PWDNSTATUS2 0x94 +#define TPS80031_VALIDITY0 0x17 +#define TPS80031_VALIDITY1 0x18 +#define TPS80031_VALIDITY2 0x19 +#define TPS80031_VALIDITY3 0x1A +#define TPS80031_VALIDITY4 0x1B +#define TPS80031_VALIDITY5 0x1C +#define TPS80031_VALIDITY6 0x1D +#define TPS80031_VALIDITY7 0x1E + +/* Version number related register */ +#define TPS80031_JTAGVERNUM 0x87 +#define TPS80031_EPROM_REV 0xDF + +/* GPADC Trimming Bits. */ +#define TPS80031_GPADC_TRIM0 0xCC +#define TPS80031_GPADC_TRIM1 0xCD +#define TPS80031_GPADC_TRIM2 0xCE +#define TPS80031_GPADC_TRIM3 0xCF +#define TPS80031_GPADC_TRIM4 0xD0 +#define TPS80031_GPADC_TRIM5 0xD1 +#define TPS80031_GPADC_TRIM6 0xD2 +#define TPS80031_GPADC_TRIM7 0xD3 +#define TPS80031_GPADC_TRIM8 0xD4 +#define TPS80031_GPADC_TRIM9 0xD5 +#define TPS80031_GPADC_TRIM10 0xD6 +#define TPS80031_GPADC_TRIM11 0xD7 +#define TPS80031_GPADC_TRIM12 0xD8 +#define TPS80031_GPADC_TRIM13 0xD9 +#define TPS80031_GPADC_TRIM14 0xDA +#define TPS80031_GPADC_TRIM15 0xDB +#define TPS80031_GPADC_TRIM16 0xDC +#define TPS80031_GPADC_TRIM17 0xDD +#define TPS80031_GPADC_TRIM18 0xDE + +/* TPS80031_CONTROLLER_STAT1 bit fields */ +#define TPS80031_CONTROLLER_STAT1_BAT_TEMP 0 +#define TPS80031_CONTROLLER_STAT1_BAT_REMOVED 1 +#define TPS80031_CONTROLLER_STAT1_VBUS_DET 2 +#define TPS80031_CONTROLLER_STAT1_VAC_DET 3 +#define TPS80031_CONTROLLER_STAT1_FAULT_WDG 4 +#define TPS80031_CONTROLLER_STAT1_LINCH_GATED 6 +/* TPS80031_CONTROLLER_INT_MASK bit filed */ +#define TPS80031_CONTROLLER_INT_MASK_MVAC_DET 0 +#define TPS80031_CONTROLLER_INT_MASK_MVBUS_DET 1 +#define TPS80031_CONTROLLER_INT_MASK_MBAT_TEMP 2 +#define TPS80031_CONTROLLER_INT_MASK_MFAULT_WDG 3 +#define TPS80031_CONTROLLER_INT_MASK_MBAT_REMOVED 4 +#define TPS80031_CONTROLLER_INT_MASK_MLINCH_GATED 5 + +#define TPS80031_CHARGE_CONTROL_SUB_INT_MASK 0x3F + +/* TPS80031_PHOENIX_DEV_ON bit field */ +#define TPS80031_DEVOFF 0x1 + +#define TPS80031_EXT_CONTROL_CFG_TRANS 0 +#define TPS80031_EXT_CONTROL_CFG_STATE 1 + +/* State register field */ +#define TPS80031_STATE_OFF 0x00 +#define TPS80031_STATE_ON 0x01 +#define TPS80031_STATE_MASK 0x03 + +/* Trans register field */ +#define TPS80031_TRANS_ACTIVE_OFF 0x00 +#define TPS80031_TRANS_ACTIVE_ON 0x01 +#define TPS80031_TRANS_ACTIVE_MASK 0x03 +#define TPS80031_TRANS_SLEEP_OFF 0x00 +#define TPS80031_TRANS_SLEEP_ON 0x04 +#define TPS80031_TRANS_SLEEP_MASK 0x0C +#define TPS80031_TRANS_OFF_OFF 0x00 +#define TPS80031_TRANS_OFF_ACTIVE 0x10 +#define TPS80031_TRANS_OFF_MASK 0x30 + +#define TPS80031_EXT_PWR_REQ (TPS80031_PWR_REQ_INPUT_PREQ1 | \ + TPS80031_PWR_REQ_INPUT_PREQ2 | \ + TPS80031_PWR_REQ_INPUT_PREQ3) + +/* TPS80031_BBSPOR_CFG bit field */ +#define TPS80031_BBSPOR_CHG_EN 0x8 +#define TPS80031_MAX_REGISTER 0xFF + +struct i2c_client; + +/* Supported chips */ +enum chips { + TPS80031 = 0x00000001, + TPS80032 = 0x00000002, +}; + +enum { + TPS80031_INT_PWRON, + TPS80031_INT_RPWRON, + TPS80031_INT_SYS_VLOW, + TPS80031_INT_RTC_ALARM, + TPS80031_INT_RTC_PERIOD, + TPS80031_INT_HOT_DIE, + TPS80031_INT_VXX_SHORT, + TPS80031_INT_SPDURATION, + TPS80031_INT_WATCHDOG, + TPS80031_INT_BAT, + TPS80031_INT_SIM, + TPS80031_INT_MMC, + TPS80031_INT_RES, + TPS80031_INT_GPADC_RT, + TPS80031_INT_GPADC_SW2_EOC, + TPS80031_INT_CC_AUTOCAL, + TPS80031_INT_ID_WKUP, + TPS80031_INT_VBUSS_WKUP, + TPS80031_INT_ID, + TPS80031_INT_VBUS, + TPS80031_INT_CHRG_CTRL, + TPS80031_INT_EXT_CHRG, + TPS80031_INT_INT_CHRG, + TPS80031_INT_RES2, + TPS80031_INT_BAT_TEMP_OVRANGE, + TPS80031_INT_BAT_REMOVED, + TPS80031_INT_VBUS_DET, + TPS80031_INT_VAC_DET, + TPS80031_INT_FAULT_WDG, + TPS80031_INT_LINCH_GATED, + + /* Last interrupt id to get the end number */ + TPS80031_INT_NR, +}; + +/* TPS80031 Slave IDs */ +#define TPS80031_NUM_SLAVES 4 +#define TPS80031_SLAVE_ID0 0 +#define TPS80031_SLAVE_ID1 1 +#define TPS80031_SLAVE_ID2 2 +#define TPS80031_SLAVE_ID3 3 + +/* TPS80031 I2C addresses */ +#define TPS80031_I2C_ID0_ADDR 0x12 +#define TPS80031_I2C_ID1_ADDR 0x48 +#define TPS80031_I2C_ID2_ADDR 0x49 +#define TPS80031_I2C_ID3_ADDR 0x4A + +enum { + TPS80031_REGULATOR_VIO, + TPS80031_REGULATOR_SMPS1, + TPS80031_REGULATOR_SMPS2, + TPS80031_REGULATOR_SMPS3, + TPS80031_REGULATOR_SMPS4, + TPS80031_REGULATOR_VANA, + TPS80031_REGULATOR_LDO1, + TPS80031_REGULATOR_LDO2, + TPS80031_REGULATOR_LDO3, + TPS80031_REGULATOR_LDO4, + TPS80031_REGULATOR_LDO5, + TPS80031_REGULATOR_LDO6, + TPS80031_REGULATOR_LDO7, + TPS80031_REGULATOR_LDOLN, + TPS80031_REGULATOR_LDOUSB, + TPS80031_REGULATOR_VBUS, + TPS80031_REGULATOR_REGEN1, + TPS80031_REGULATOR_REGEN2, + TPS80031_REGULATOR_SYSEN, + TPS80031_REGULATOR_MAX, +}; + +/* Different configurations for the rails */ +enum { + /* USBLDO input selection */ + TPS80031_USBLDO_INPUT_VSYS = 0x00000001, + TPS80031_USBLDO_INPUT_PMID = 0x00000002, + + /* LDO3 output mode */ + TPS80031_LDO3_OUTPUT_VIB = 0x00000004, + + /* VBUS configuration */ + TPS80031_VBUS_DISCHRG_EN_PDN = 0x00000004, + TPS80031_VBUS_SW_ONLY = 0x00000008, + TPS80031_VBUS_SW_N_ID = 0x00000010, +}; + +/* External controls requests */ +enum tps80031_ext_control { + TPS80031_PWR_REQ_INPUT_NONE = 0x00000000, + TPS80031_PWR_REQ_INPUT_PREQ1 = 0x00000001, + TPS80031_PWR_REQ_INPUT_PREQ2 = 0x00000002, + TPS80031_PWR_REQ_INPUT_PREQ3 = 0x00000004, + TPS80031_PWR_OFF_ON_SLEEP = 0x00000008, + TPS80031_PWR_ON_ON_SLEEP = 0x00000010, +}; + +enum tps80031_pupd_pins { + TPS80031_PREQ1 = 0, + TPS80031_PREQ2A, + TPS80031_PREQ2B, + TPS80031_PREQ2C, + TPS80031_PREQ3, + TPS80031_NRES_WARM, + TPS80031_PWM_FORCE, + TPS80031_CHRG_EXT_CHRG_STATZ, + TPS80031_SIM, + TPS80031_MMC, + TPS80031_GPADC_START, + TPS80031_DVSI2C_SCL, + TPS80031_DVSI2C_SDA, + TPS80031_CTLI2C_SCL, + TPS80031_CTLI2C_SDA, +}; + +enum tps80031_pupd_settings { + TPS80031_PUPD_NORMAL, + TPS80031_PUPD_PULLDOWN, + TPS80031_PUPD_PULLUP, +}; + +struct tps80031 { + struct device *dev; + unsigned long chip_info; + int es_version; + struct i2c_client *clients[TPS80031_NUM_SLAVES]; + struct regmap *regmap[TPS80031_NUM_SLAVES]; + struct regmap_irq_chip_data *irq_data; +}; + +struct tps80031_pupd_init_data { + int input_pin; + int setting; +}; + +/* + * struct tps80031_regulator_platform_data - tps80031 regulator platform data. + * + * @reg_init_data: The regulator init data. + * @ext_ctrl_flag: External control flag for sleep/power request control. + * @config_flags: Configuration flag to configure the rails. + * It should be ORed of config enums. + */ + +struct tps80031_regulator_platform_data { + struct regulator_init_data *reg_init_data; + unsigned int ext_ctrl_flag; + unsigned int config_flags; +}; + +struct tps80031_platform_data { + int irq_base; + bool use_power_off; + struct tps80031_pupd_init_data *pupd_init_data; + int pupd_init_data_size; + struct tps80031_regulator_platform_data + *regulator_pdata[TPS80031_REGULATOR_MAX]; +}; + +static inline int tps80031_write(struct device *dev, int sid, + int reg, uint8_t val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_write(tps80031->regmap[sid], reg, val); +} + +static inline int tps80031_writes(struct device *dev, int sid, int reg, + int len, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_bulk_write(tps80031->regmap[sid], reg, val, len); +} + +static inline int tps80031_read(struct device *dev, int sid, + int reg, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + + ret = regmap_read(tps80031->regmap[sid], reg, &ival); + if (ret < 0) { + dev_err(dev, "failed reading from reg 0x%02x\n", reg); + return ret; + } + + *val = ival; + return ret; +} + +static inline int tps80031_reads(struct device *dev, int sid, + int reg, int len, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_bulk_read(tps80031->regmap[sid], reg, val, len); +} + +static inline int tps80031_set_bits(struct device *dev, int sid, + int reg, uint8_t bit_mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, + bit_mask, bit_mask); +} + +static inline int tps80031_clr_bits(struct device *dev, int sid, + int reg, uint8_t bit_mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, bit_mask, 0); +} + +static inline int tps80031_update(struct device *dev, int sid, + int reg, uint8_t val, uint8_t mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, mask, val); +} + +static inline unsigned long tps80031_get_chip_info(struct device *dev) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return tps80031->chip_info; +} + +static inline int tps80031_get_pmu_version(struct device *dev) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return tps80031->es_version; +} + +static inline int tps80031_irq_get_virq(struct device *dev, int irq) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_irq_get_virq(tps80031->irq_data, irq); +} + +extern int tps80031_ext_power_req_config(struct device *dev, + unsigned long ext_ctrl_flag, int preq_bit, + int state_reg_add, int trans_reg_add); +#endif /*__LINUX_MFD_TPS80031_H */ diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index a8eff4ad9be5..94ac944d12f0 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -207,10 +207,12 @@ struct twl6040_platform_data { }; struct regmap; +struct regmap_irq_chips_data; struct twl6040 { struct device *dev; struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */ struct mutex mutex; struct mutex irq_mutex; @@ -228,9 +230,8 @@ struct twl6040 { unsigned int mclk; unsigned int irq; - unsigned int irq_base; - u8 irq_masks_cur; - u8 irq_masks_cache; + unsigned int irq_ready; + unsigned int irq_th; }; int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg); @@ -245,8 +246,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, unsigned int freq_in, unsigned int freq_out); int twl6040_get_pll(struct twl6040 *twl6040); unsigned int twl6040_get_sysclk(struct twl6040 *twl6040); -int twl6040_irq_init(struct twl6040 *twl6040); -void twl6040_irq_exit(struct twl6040 *twl6040); + /* Get the combined status of the vibra control register */ int twl6040_get_vibralr_status(struct twl6040 *twl6040); diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h new file mode 100644 index 000000000000..193452848c04 --- /dev/null +++ b/include/linux/mfd/viperboard.h @@ -0,0 +1,110 @@ +/* + * include/linux/mfd/viperboard.h + * + * Nano River Technologies viperboard definitions + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel <poeschel@lemonage.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_VIPERBOARD_H__ +#define __MFD_VIPERBOARD_H__ + +#include <linux/types.h> +#include <linux/usb.h> + +#define VPRBRD_EP_OUT 0x02 +#define VPRBRD_EP_IN 0x86 + +#define VPRBRD_I2C_MSG_LEN 512 /* max length of a msg on USB level */ + +#define VPRBRD_I2C_FREQ_6MHZ 1 /* 6 MBit/s */ +#define VPRBRD_I2C_FREQ_3MHZ 2 /* 3 MBit/s */ +#define VPRBRD_I2C_FREQ_1MHZ 3 /* 1 MBit/s */ +#define VPRBRD_I2C_FREQ_FAST 4 /* 400 kbit/s */ +#define VPRBRD_I2C_FREQ_400KHZ VPRBRD_I2C_FREQ_FAST +#define VPRBRD_I2C_FREQ_200KHZ 5 /* 200 kbit/s */ +#define VPRBRD_I2C_FREQ_STD 6 /* 100 kbit/s */ +#define VPRBRD_I2C_FREQ_100KHZ VPRBRD_I2C_FREQ_STD +#define VPRBRD_I2C_FREQ_10KHZ 7 /* 10 kbit/s */ + +#define VPRBRD_I2C_CMD_WRITE 0x00 +#define VPRBRD_I2C_CMD_READ 0x01 +#define VPRBRD_I2C_CMD_ADDR 0x02 + +#define VPRBRD_USB_TYPE_OUT 0x40 +#define VPRBRD_USB_TYPE_IN 0xc0 +#define VPRBRD_USB_TIMEOUT_MS 100 +#define VPRBRD_USB_REQUEST_I2C_FREQ 0xe6 +#define VPRBRD_USB_REQUEST_I2C 0xe9 +#define VPRBRD_USB_REQUEST_MAJOR 0xea +#define VPRBRD_USB_REQUEST_MINOR 0xeb +#define VPRBRD_USB_REQUEST_ADC 0xec +#define VPRBRD_USB_REQUEST_GPIOA 0xed +#define VPRBRD_USB_REQUEST_GPIOB 0xdd + +struct vprbrd_i2c_write_hdr { + u8 cmd; + u16 addr; + u8 len1; + u8 len2; + u8 last; + u8 chan; + u16 spi; +} __packed; + +struct vprbrd_i2c_read_hdr { + u8 cmd; + u16 addr; + u8 len0; + u8 len1; + u8 len2; + u8 len3; + u8 len4; + u8 len5; + u16 tf1; /* transfer 1 length */ + u16 tf2; /* transfer 2 length */ +} __packed; + +struct vprbrd_i2c_status { + u8 unknown[11]; + u8 status; +} __packed; + +struct vprbrd_i2c_write_msg { + struct vprbrd_i2c_write_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_write_hdr)]; +} __packed; + +struct vprbrd_i2c_read_msg { + struct vprbrd_i2c_read_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_read_hdr)]; +} __packed; + +struct vprbrd_i2c_addr_msg { + u8 cmd; + u8 addr; + u8 unknown1; + u16 len; + u8 unknown2; + u8 unknown3; +} __packed; + +/* Structure to hold all device specific stuff */ +struct vprbrd { + struct usb_device *usb_dev; /* the usb device for this device */ + struct mutex lock; + u8 buf[sizeof(struct vprbrd_i2c_write_msg)]; + struct platform_device pdev; +}; + +#endif /* __MFD_VIPERBOARD_H__ */ diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h new file mode 100644 index 000000000000..e41d5834cb84 --- /dev/null +++ b/include/linux/platform_data/ti_am335x_adc.h @@ -0,0 +1,14 @@ +#ifndef __LINUX_TI_AM335X_ADC_H +#define __LINUX_TI_AM335X_ADC_H + +/** + * struct adc_data ADC Input information + * @adc_channels: Number of analog inputs + * available for ADC. + */ + +struct adc_data { + unsigned int adc_channels; +}; + +#endif |
