diff options
Diffstat (limited to 'include/linux/soc')
| -rw-r--r-- | include/linux/soc/ti/k3-ringacc.h | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/include/linux/soc/ti/k3-ringacc.h b/include/linux/soc/ti/k3-ringacc.h new file mode 100644 index 000000000000..26f73df0a524 --- /dev/null +++ b/include/linux/soc/ti/k3-ringacc.h @@ -0,0 +1,244 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * K3 Ring Accelerator (RA) subsystem interface + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + */ + +#ifndef __SOC_TI_K3_RINGACC_API_H_ +#define __SOC_TI_K3_RINGACC_API_H_ + +#include <linux/types.h> + +struct device_node; + +/** + * enum k3_ring_mode - &struct k3_ring_cfg mode + * + * RA ring operational modes + * + * @K3_RINGACC_RING_MODE_RING: Exposed Ring mode for SW direct access + * @K3_RINGACC_RING_MODE_MESSAGE: Messaging mode. Messaging mode requires + * that all accesses to the queue must go through this IP so that all + * accesses to the memory are controlled and ordered. This IP then + * controls the entire state of the queue, and SW has no directly control, + * such as through doorbells and cannot access the storage memory directly. + * This is particularly useful when more than one SW or HW entity can be + * the producer and/or consumer at the same time + * @K3_RINGACC_RING_MODE_CREDENTIALS: Credentials mode is message mode plus + * stores credentials with each message, requiring the element size to be + * doubled to fit the credentials. Any exposed memory should be protected + * by a firewall from unwanted access + */ +enum k3_ring_mode { + K3_RINGACC_RING_MODE_RING = 0, + K3_RINGACC_RING_MODE_MESSAGE, + K3_RINGACC_RING_MODE_CREDENTIALS, + K3_RINGACC_RING_MODE_INVALID +}; + +/** + * enum k3_ring_size - &struct k3_ring_cfg elm_size + * + * RA ring element's sizes in bytes. + */ +enum k3_ring_size { + K3_RINGACC_RING_ELSIZE_4 = 0, + K3_RINGACC_RING_ELSIZE_8, + K3_RINGACC_RING_ELSIZE_16, + K3_RINGACC_RING_ELSIZE_32, + K3_RINGACC_RING_ELSIZE_64, + K3_RINGACC_RING_ELSIZE_128, + K3_RINGACC_RING_ELSIZE_256, + K3_RINGACC_RING_ELSIZE_INVALID +}; + +struct k3_ringacc; +struct k3_ring; + +/** + * enum k3_ring_cfg - RA ring configuration structure + * + * @size: Ring size, number of elements + * @elm_size: Ring element size + * @mode: Ring operational mode + * @flags: Ring configuration flags. Possible values: + * @K3_RINGACC_RING_SHARED: when set allows to request the same ring + * few times. It's usable when the same ring is used as Free Host PD ring + * for different flows, for example. + * Note: Locking should be done by consumer if required + */ +struct k3_ring_cfg { + u32 size; + enum k3_ring_size elm_size; + enum k3_ring_mode mode; +#define K3_RINGACC_RING_SHARED BIT(1) + u32 flags; +}; + +#define K3_RINGACC_RING_ID_ANY (-1) + +/** + * of_k3_ringacc_get_by_phandle - find a RA by phandle property + * @np: device node + * @propname: property name containing phandle on RA node + * + * Returns pointer on the RA - struct k3_ringacc + * or -ENODEV if not found, + * or -EPROBE_DEFER if not yet registered + */ +struct k3_ringacc *of_k3_ringacc_get_by_phandle(struct device_node *np, + const char *property); + +#define K3_RINGACC_RING_USE_PROXY BIT(1) + +/** + * k3_ringacc_request_ring - request ring from ringacc + * @ringacc: pointer on ringacc + * @id: ring id or K3_RINGACC_RING_ID_ANY for any general purpose ring + * @flags: + * @K3_RINGACC_RING_USE_PROXY: if set - proxy will be allocated and + * used to access ring memory. Sopported only for rings in + * Message/Credentials/Queue mode. + * + * Returns pointer on the Ring - struct k3_ring + * or NULL in case of failure. + */ +struct k3_ring *k3_ringacc_request_ring(struct k3_ringacc *ringacc, + int id, u32 flags); + +/** + * k3_ringacc_ring_reset - ring reset + * @ring: pointer on Ring + * + * Resets ring internal state ((hw)occ, (hw)idx). + */ +void k3_ringacc_ring_reset(struct k3_ring *ring); +/** + * k3_ringacc_ring_reset - ring reset for DMA rings + * @ring: pointer on Ring + * + * Resets ring internal state ((hw)occ, (hw)idx). Should be used for rings + * which are read by K3 UDMA, like TX or Free Host PD rings. + */ +void k3_ringacc_ring_reset_dma(struct k3_ring *ring, u32 occ); + +/** + * k3_ringacc_ring_free - ring free + * @ring: pointer on Ring + * + * Resets ring and free all alocated resources. + */ +int k3_ringacc_ring_free(struct k3_ring *ring); + +/** + * k3_ringacc_get_ring_id - Get the Ring ID + * @ring: pointer on ring + * + * Returns the Ring ID + */ +u32 k3_ringacc_get_ring_id(struct k3_ring *ring); + +/** + * k3_ringacc_get_ring_irq_num - Get the irq number for the ring + * @ring: pointer on ring + * + * Returns the interrupt number which can be used to request the interrupt + */ +int k3_ringacc_get_ring_irq_num(struct k3_ring *ring); + +/** + * k3_ringacc_ring_cfg - ring configure + * @ring: pointer on ring + * @cfg: Ring configuration parameters (see &struct k3_ring_cfg) + * + * Configures ring, including ring memory allocation. + * Returns 0 on success, errno otherwise. + */ +int k3_ringacc_ring_cfg(struct k3_ring *ring, struct k3_ring_cfg *cfg); + +/** + * k3_ringacc_ring_get_size - get ring size + * @ring: pointer on ring + * + * Returns ring size in number of elements. + */ +u32 k3_ringacc_ring_get_size(struct k3_ring *ring); + +/** + * k3_ringacc_ring_get_free - get free elements + * @ring: pointer on ring + * + * Returns number of free elements in the ring. + */ +u32 k3_ringacc_ring_get_free(struct k3_ring *ring); + +/** + * k3_ringacc_ring_get_occ - get ring occupancy + * @ring: pointer on ring + * + * Returns total number of valid entries on the ring + */ +u32 k3_ringacc_ring_get_occ(struct k3_ring *ring); + +/** + * k3_ringacc_ring_is_full - checks if ring is full + * @ring: pointer on ring + * + * Returns true if the ring is full + */ +u32 k3_ringacc_ring_is_full(struct k3_ring *ring); + +/** + * k3_ringacc_ring_push - push element to the ring tail + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element to the ring tail. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + */ +int k3_ringacc_ring_push(struct k3_ring *ring, void *elem); + +/** + * k3_ringacc_ring_pop - pop element from the ring head + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element from the ring head. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size.. + * + * Returns 0 on success, errno otherwise. + */ +int k3_ringacc_ring_pop(struct k3_ring *ring, void *elem); + +/** + * k3_ringacc_ring_push_head - push element to the ring head + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element to the ring head. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + * Not Supported by ring modes: K3_RINGACC_RING_MODE_RING + */ +int k3_ringacc_ring_push_head(struct k3_ring *ring, void *elem); + +/** + * k3_ringacc_ring_pop_tail - pop element from the ring tail + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element from the ring tail. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + * Not Supported by ring modes: K3_RINGACC_RING_MODE_RING + */ +int k3_ringacc_ring_pop_tail(struct k3_ring *ring, void *elem); + +u32 k3_ringacc_get_tisci_dev_id(struct k3_ring *ring); + +#endif /* __SOC_TI_K3_RINGACC_API_H_ */ |
