diff options
Diffstat (limited to 'include/linux/bcma/bcma_driver_chipcommon.h')
| -rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h new file mode 100644 index 000000000000..083c3b6cd5ce --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -0,0 +1,302 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + +/** ChipCommon core registers. **/ +#define BCMA_CC_ID 0x0000 +#define BCMA_CC_ID_ID 0x0000FFFF +#define BCMA_CC_ID_ID_SHIFT 0 +#define BCMA_CC_ID_REV 0x000F0000 +#define BCMA_CC_ID_REV_SHIFT 16 +#define BCMA_CC_ID_PKG 0x00F00000 +#define BCMA_CC_ID_PKG_SHIFT 20 +#define BCMA_CC_ID_NRCORES 0x0F000000 +#define BCMA_CC_ID_NRCORES_SHIFT 24 +#define BCMA_CC_ID_TYPE 0xF0000000 +#define BCMA_CC_ID_TYPE_SHIFT 28 +#define BCMA_CC_CAP 0x0004 /* Capabilities */ +#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ +#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ +#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */ +#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ +#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ +#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */ +#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 +#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ +#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ +#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ +#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ +#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ +#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */ +#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */ +#define BCMA_CC_CAP_OTPS_SHIFT 19 +#define BCMA_CC_CAP_OTPS_BASE 5 +#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */ +#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */ +#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */ +#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ +#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CORECTL 0x0008 +#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ +#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ +#define BCMA_CC_BIST 0x000C +#define BCMA_CC_OTPS 0x0010 /* OTP status */ +#define BCMA_CC_OTPS_PROGFAIL 0x80000000 +#define BCMA_CC_OTPS_PROTECT 0x00000007 +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +#define BCMA_CC_OTPC_PRW_SHIFT 8 +#define BCMA_CC_OTPC_MAXFAIL 0x00000038 +#define BCMA_CC_OTPC_VSEL 0x00000006 +#define BCMA_CC_OTPC_SELVL 0x00000001 +#define BCMA_CC_OTPP 0x0018 /* OTP prog */ +#define BCMA_CC_OTPP_COL 0x000000FF +#define BCMA_CC_OTPP_ROW 0x0000FF00 +#define BCMA_CC_OTPP_ROW_SHIFT 8 +#define BCMA_CC_OTPP_READERR 0x10000000 +#define BCMA_CC_OTPP_VALUE 0x20000000 +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 +#define BCMA_CC_JCMD_PAUSE 0x40000000 +#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000 +#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD0_ACC_DR 0x00001000 +#define BCMA_CC_JCMD0_ACC_IR 0x00002000 +#define BCMA_CC_JCMD0_ACC_RESET 0x00003000 +#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000 +#define BCMA_CC_JCMD0_ACC_PDR 0x00005000 +#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00 +#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ +#define BCMA_CC_JCMD_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD_ACC_DR 0x00010000 +#define BCMA_CC_JCMD_ACC_IR 0x00020000 +#define BCMA_CC_JCMD_ACC_RESET 0x00030000 +#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000 +#define BCMA_CC_JCMD_ACC_PDR 0x00050000 +#define BCMA_CC_JCMD_IRW_MASK 0x00001F00 +#define BCMA_CC_JCMD_IRW_SHIFT 8 +#define BCMA_CC_JCMD_DRW_MASK 0x0000003F +#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */ +#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */ +#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */ +#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */ +#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ +#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ +#define BCMA_CC_FLASHCTL 0x0040 +#define BCMA_CC_FLASHCTL_START 0x80000000 +#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +#define BCMA_CC_FLASHADDR 0x0044 +#define BCMA_CC_FLASHDATA 0x0048 +#define BCMA_CC_BCAST_ADDR 0x0050 +#define BCMA_CC_BCAST_DATA 0x0054 +#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ +#define BCMA_CC_GPIOIN 0x0060 +#define BCMA_CC_GPIOOUT 0x0064 +#define BCMA_CC_GPIOOUTEN 0x0068 +#define BCMA_CC_GPIOCTL 0x006C +#define BCMA_CC_GPIOPOL 0x0070 +#define BCMA_CC_GPIOIRQ 0x0074 +#define BCMA_CC_WATCHDOG 0x0080 +#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF +#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0 +#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000 +#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16 +#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ +#define BCMA_CC_CLOCK_N 0x0090 +#define BCMA_CC_CLOCK_SB 0x0094 +#define BCMA_CC_CLOCK_PCI 0x0098 +#define BCMA_CC_CLOCK_M2 0x009C +#define BCMA_CC_CLOCK_MIPS 0x00A0 +#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */ +#define BCMA_CC_CLKDIV_SFLASH 0x0F000000 +#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24 +#define BCMA_CC_CLKDIV_OTP 0x000F0000 +#define BCMA_CC_CLKDIV_OTP_SHIFT 16 +#define BCMA_CC_CLKDIV_JTAG 0x00000F00 +#define BCMA_CC_CLKDIV_JTAG_SHIFT 8 +#define BCMA_CC_CLKDIV_UART 0x000000FF +#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ +#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ +#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ +#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ +#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ +#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ +#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ +#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ +#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ +#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ +#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ +#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ +#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ +#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */ +#define BCMA_CC_EROM 0x00FC +#define BCMA_CC_PCMCIA_CFG 0x0100 +#define BCMA_CC_PCMCIA_MEMWAIT 0x0104 +#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108 +#define BCMA_CC_PCMCIA_IOWAIT 0x010C +#define BCMA_CC_IDE_CFG 0x0110 +#define BCMA_CC_IDE_MEMWAIT 0x0114 +#define BCMA_CC_IDE_ATTRWAIT 0x0118 +#define BCMA_CC_IDE_IOWAIT 0x011C +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_WAITCNT 0x012C +#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ +#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define BCMA_CC_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define BCMA_CC_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define BCMA_CC_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define BCMA_CC_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 +#define BCMA_CC_UART0_IMR 0x0304 +#define BCMA_CC_UART0_FCR 0x0308 +#define BCMA_CC_UART0_LCR 0x030C +#define BCMA_CC_UART0_MCR 0x0310 +#define BCMA_CC_UART0_LSR 0x0314 +#define BCMA_CC_UART0_MSR 0x0318 +#define BCMA_CC_UART0_SCRATCH 0x031C +#define BCMA_CC_UART1_DATA 0x0400 +#define BCMA_CC_UART1_IMR 0x0404 +#define BCMA_CC_UART1_FCR 0x0408 +#define BCMA_CC_UART1_LCR 0x040C +#define BCMA_CC_UART1_MCR 0x0410 +#define BCMA_CC_UART1_LSR 0x0414 +#define BCMA_CC_UART1_MSR 0x0418 +#define BCMA_CC_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2 +#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ +#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ +#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */ +#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */ +#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define BCMA_CC_CHIPCTL_ADDR 0x0650 +#define BCMA_CC_CHIPCTL_DATA 0x0654 +#define BCMA_CC_REGCTL_ADDR 0x0658 +#define BCMA_CC_REGCTL_DATA 0x065C +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 + +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +struct bcma_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; +}; + +/* Register access */ +#define bcma_cc_read32(cc, offset) \ + bcma_read32((cc)->core, offset) +#define bcma_cc_write32(cc, offset, val) \ + bcma_write32((cc)->core, offset, val) + +#define bcma_cc_mask32(cc, offset, mask) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask)) +#define bcma_cc_set32(cc, offset, set) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set)) +#define bcma_cc_maskset32(cc, offset, mask, set) \ + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + +extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); + +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); + +/* Chipcommon GPIO pin access. */ +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask); +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); + +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ |
