diff options
Diffstat (limited to 'include/asm-i386/vm86.h')
| -rw-r--r-- | include/asm-i386/vm86.h | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/include/asm-i386/vm86.h b/include/asm-i386/vm86.h deleted file mode 100644 index a5edf517b992..000000000000 --- a/include/asm-i386/vm86.h +++ /dev/null @@ -1,215 +0,0 @@ -#ifndef _LINUX_VM86_H -#define _LINUX_VM86_H - -/* - * I'm guessing at the VIF/VIP flag usage, but hope that this is how - * the Pentium uses them. Linux will return from vm86 mode when both - * VIF and VIP is set. - * - * On a Pentium, we could probably optimize the virtual flags directly - * in the eflags register instead of doing it "by hand" in vflags... - * - * Linus - */ - -#define TF_MASK 0x00000100 -#define IF_MASK 0x00000200 -#define IOPL_MASK 0x00003000 -#define NT_MASK 0x00004000 -#ifdef CONFIG_VM86 -#define VM_MASK 0x00020000 -#else -#define VM_MASK 0 /* ignored */ -#endif -#define AC_MASK 0x00040000 -#define VIF_MASK 0x00080000 /* virtual interrupt flag */ -#define VIP_MASK 0x00100000 /* virtual interrupt pending */ -#define ID_MASK 0x00200000 - -#define BIOSSEG 0x0f000 - -#define CPU_086 0 -#define CPU_186 1 -#define CPU_286 2 -#define CPU_386 3 -#define CPU_486 4 -#define CPU_586 5 - -/* - * Return values for the 'vm86()' system call - */ -#define VM86_TYPE(retval) ((retval) & 0xff) -#define VM86_ARG(retval) ((retval) >> 8) - -#define VM86_SIGNAL 0 /* return due to signal */ -#define VM86_UNKNOWN 1 /* unhandled GP fault - IO-instruction or similar */ -#define VM86_INTx 2 /* int3/int x instruction (ARG = x) */ -#define VM86_STI 3 /* sti/popf/iret instruction enabled virtual interrupts */ - -/* - * Additional return values when invoking new vm86() - */ -#define VM86_PICRETURN 4 /* return due to pending PIC request */ -#define VM86_TRAP 6 /* return due to DOS-debugger request */ - -/* - * function codes when invoking new vm86() - */ -#define VM86_PLUS_INSTALL_CHECK 0 -#define VM86_ENTER 1 -#define VM86_ENTER_NO_BYPASS 2 -#define VM86_REQUEST_IRQ 3 -#define VM86_FREE_IRQ 4 -#define VM86_GET_IRQ_BITS 5 -#define VM86_GET_AND_RESET_IRQ 6 - -/* - * This is the stack-layout seen by the user space program when we have - * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout - * is 'kernel_vm86_regs' (see below). - */ - -struct vm86_regs { -/* - * normal regs, with special meaning for the segment descriptors.. - */ - long ebx; - long ecx; - long edx; - long esi; - long edi; - long ebp; - long eax; - long __null_ds; - long __null_es; - long __null_fs; - long __null_gs; - long orig_eax; - long eip; - unsigned short cs, __csh; - long eflags; - long esp; - unsigned short ss, __ssh; -/* - * these are specific to v86 mode: - */ - unsigned short es, __esh; - unsigned short ds, __dsh; - unsigned short fs, __fsh; - unsigned short gs, __gsh; -}; - -struct revectored_struct { - unsigned long __map[8]; /* 256 bits */ -}; - -struct vm86_struct { - struct vm86_regs regs; - unsigned long flags; - unsigned long screen_bitmap; - unsigned long cpu_type; - struct revectored_struct int_revectored; - struct revectored_struct int21_revectored; -}; - -/* - * flags masks - */ -#define VM86_SCREEN_BITMAP 0x0001 - -struct vm86plus_info_struct { - unsigned long force_return_for_pic:1; - unsigned long vm86dbg_active:1; /* for debugger */ - unsigned long vm86dbg_TFpendig:1; /* for debugger */ - unsigned long unused:28; - unsigned long is_vm86pus:1; /* for vm86 internal use */ - unsigned char vm86dbg_intxxtab[32]; /* for debugger */ -}; - -struct vm86plus_struct { - struct vm86_regs regs; - unsigned long flags; - unsigned long screen_bitmap; - unsigned long cpu_type; - struct revectored_struct int_revectored; - struct revectored_struct int21_revectored; - struct vm86plus_info_struct vm86plus; -}; - -#ifdef __KERNEL__ -/* - * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86 - * mode - the main change is that the old segment descriptors aren't - * useful any more and are forced to be zero by the kernel (and the - * hardware when a trap occurs), and the real segment descriptors are - * at the end of the structure. Look at ptrace.h to see the "normal" - * setup. For user space layout see 'struct vm86_regs' above. - */ -#include <asm/ptrace.h> - -struct kernel_vm86_regs { -/* - * normal regs, with special meaning for the segment descriptors.. - */ - struct pt_regs pt; -/* - * these are specific to v86 mode: - */ - unsigned short es, __esh; - unsigned short ds, __dsh; - unsigned short fs, __fsh; - unsigned short gs, __gsh; -}; - -struct kernel_vm86_struct { - struct kernel_vm86_regs regs; -/* - * the below part remains on the kernel stack while we are in VM86 mode. - * 'tss.esp0' then contains the address of VM86_TSS_ESP0 below, and when we - * get forced back from VM86, the CPU and "SAVE_ALL" will restore the above - * 'struct kernel_vm86_regs' with the then actual values. - * Therefore, pt_regs in fact points to a complete 'kernel_vm86_struct' - * in kernelspace, hence we need not reget the data from userspace. - */ -#define VM86_TSS_ESP0 flags - unsigned long flags; - unsigned long screen_bitmap; - unsigned long cpu_type; - struct revectored_struct int_revectored; - struct revectored_struct int21_revectored; - struct vm86plus_info_struct vm86plus; - struct pt_regs *regs32; /* here we save the pointer to the old regs */ -/* - * The below is not part of the structure, but the stack layout continues - * this way. In front of 'return-eip' may be some data, depending on - * compilation, so we don't rely on this and save the pointer to 'oldregs' - * in 'regs32' above. - * However, with GCC-2.7.2 and the current CFLAGS you see exactly this: - - long return-eip; from call to vm86() - struct pt_regs oldregs; user space registers as saved by syscall - */ -}; - -#ifdef CONFIG_VM86 - -void handle_vm86_fault(struct kernel_vm86_regs *, long); -int handle_vm86_trap(struct kernel_vm86_regs *, long, int); - -struct task_struct; -void release_vm86_irqs(struct task_struct *); - -#else - -#define handle_vm86_fault(a, b) -#define release_vm86_irqs(a) - -static inline int handle_vm86_trap(struct kernel_vm86_regs *a, long b, int c) { - return 0; -} - -#endif /* CONFIG_VM86 */ - -#endif /* __KERNEL__ */ - -#endif |
