diff options
Diffstat (limited to 'fs/ntfs/attrib.c')
| -rw-r--r-- | fs/ntfs/attrib.c | 634 |
1 files changed, 634 insertions, 0 deletions
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index 8821e2d088b7..bc25e88ad468 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -1835,6 +1835,640 @@ page_err_out: } /** + * ntfs_attr_extend_allocation - extend the allocated space of an attribute + * @ni: ntfs inode of the attribute whose allocation to extend + * @new_alloc_size: new size in bytes to which to extend the allocation to + * @new_data_size: new size in bytes to which to extend the data to + * @data_start: beginning of region which is required to be non-sparse + * + * Extend the allocated space of an attribute described by the ntfs inode @ni + * to @new_alloc_size bytes. If @data_start is -1, the whole extension may be + * implemented as a hole in the file (as long as both the volume and the ntfs + * inode @ni have sparse support enabled). If @data_start is >= 0, then the + * region between the old allocated size and @data_start - 1 may be made sparse + * but the regions between @data_start and @new_alloc_size must be backed by + * actual clusters. + * + * If @new_data_size is -1, it is ignored. If it is >= 0, then the data size + * of the attribute is extended to @new_data_size. Note that the i_size of the + * vfs inode is not updated. Only the data size in the base attribute record + * is updated. The caller has to update i_size separately if this is required. + * WARNING: It is a BUG() for @new_data_size to be smaller than the old data + * size as well as for @new_data_size to be greater than @new_alloc_size. + * + * For resident attributes this involves resizing the attribute record and if + * necessary moving it and/or other attributes into extent mft records and/or + * converting the attribute to a non-resident attribute which in turn involves + * extending the allocation of a non-resident attribute as described below. + * + * For non-resident attributes this involves allocating clusters in the data + * zone on the volume (except for regions that are being made sparse) and + * extending the run list to describe the allocated clusters as well as + * updating the mapping pairs array of the attribute. This in turn involves + * resizing the attribute record and if necessary moving it and/or other + * attributes into extent mft records and/or splitting the attribute record + * into multiple extent attribute records. + * + * Also, the attribute list attribute is updated if present and in some of the + * above cases (the ones where extent mft records/attributes come into play), + * an attribute list attribute is created if not already present. + * + * Return the new allocated size on success and -errno on error. In the case + * that an error is encountered but a partial extension at least up to + * @data_start (if present) is possible, the allocation is partially extended + * and this is returned. This means the caller must check the returned size to + * determine if the extension was partial. If @data_start is -1 then partial + * allocations are not performed. + * + * WARNING: Do not call ntfs_attr_extend_allocation() for $MFT/$DATA. + * + * Locking: This function takes the runlist lock of @ni for writing as well as + * locking the mft record of the base ntfs inode. These locks are maintained + * throughout execution of the function. These locks are required so that the + * attribute can be resized safely and so that it can for example be converted + * from resident to non-resident safely. + * + * TODO: At present attribute list attribute handling is not implemented. + * + * TODO: At present it is not safe to call this function for anything other + * than the $DATA attribute(s) of an uncompressed and unencrypted file. + */ +s64 ntfs_attr_extend_allocation(ntfs_inode *ni, s64 new_alloc_size, + const s64 new_data_size, const s64 data_start) +{ + VCN vcn; + s64 ll, allocated_size, start = data_start; + struct inode *vi = VFS_I(ni); + ntfs_volume *vol = ni->vol; + ntfs_inode *base_ni; + MFT_RECORD *m; + ATTR_RECORD *a; + ntfs_attr_search_ctx *ctx; + runlist_element *rl, *rl2; + unsigned long flags; + int err, mp_size; + u32 attr_len = 0; /* Silence stupid gcc warning. */ + BOOL mp_rebuilt; + +#ifdef NTFS_DEBUG + read_lock_irqsave(&ni->size_lock, flags); + allocated_size = ni->allocated_size; + read_unlock_irqrestore(&ni->size_lock, flags); + ntfs_debug("Entering for i_ino 0x%lx, attribute type 0x%x, " + "old_allocated_size 0x%llx, " + "new_allocated_size 0x%llx, new_data_size 0x%llx, " + "data_start 0x%llx.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), + (unsigned long long)allocated_size, + (unsigned long long)new_alloc_size, + (unsigned long long)new_data_size, + (unsigned long long)start); +#endif +retry_extend: + /* + * For non-resident attributes, @start and @new_size need to be aligned + * to cluster boundaries for allocation purposes. + */ + if (NInoNonResident(ni)) { + if (start > 0) + start &= ~(s64)vol->cluster_size_mask; + new_alloc_size = (new_alloc_size + vol->cluster_size - 1) & + ~(s64)vol->cluster_size_mask; + } + BUG_ON(new_data_size >= 0 && new_data_size > new_alloc_size); + /* Check if new size is allowed in $AttrDef. */ + err = ntfs_attr_size_bounds_check(vol, ni->type, new_alloc_size); + if (unlikely(err)) { + /* Only emit errors when the write will fail completely. */ + read_lock_irqsave(&ni->size_lock, flags); + allocated_size = ni->allocated_size; + read_unlock_irqrestore(&ni->size_lock, flags); + if (start < 0 || start >= allocated_size) { + if (err == -ERANGE) { + ntfs_error(vol->sb, "Cannot extend allocation " + "of inode 0x%lx, attribute " + "type 0x%x, because the new " + "allocation would exceed the " + "maximum allowed size for " + "this attribute type.", + vi->i_ino, (unsigned) + le32_to_cpu(ni->type)); + } else { + ntfs_error(vol->sb, "Cannot extend allocation " + "of inode 0x%lx, attribute " + "type 0x%x, because this " + "attribute type is not " + "defined on the NTFS volume. " + "Possible corruption! You " + "should run chkdsk!", + vi->i_ino, (unsigned) + le32_to_cpu(ni->type)); + } + } + /* Translate error code to be POSIX conformant for write(2). */ + if (err == -ERANGE) + err = -EFBIG; + else + err = -EIO; + return err; + } + if (!NInoAttr(ni)) + base_ni = ni; + else + base_ni = ni->ext.base_ntfs_ino; + /* + * We will be modifying both the runlist (if non-resident) and the mft + * record so lock them both down. + */ + down_write(&ni->runlist.lock); + m = map_mft_record(base_ni); + if (IS_ERR(m)) { + err = PTR_ERR(m); + m = NULL; + ctx = NULL; + goto err_out; + } + ctx = ntfs_attr_get_search_ctx(base_ni, m); + if (unlikely(!ctx)) { + err = -ENOMEM; + goto err_out; + } + read_lock_irqsave(&ni->size_lock, flags); + allocated_size = ni->allocated_size; + read_unlock_irqrestore(&ni->size_lock, flags); + /* + * If non-resident, seek to the last extent. If resident, there is + * only one extent, so seek to that. + */ + vcn = NInoNonResident(ni) ? allocated_size >> vol->cluster_size_bits : + 0; + /* + * Abort if someone did the work whilst we waited for the locks. If we + * just converted the attribute from resident to non-resident it is + * likely that exactly this has happened already. We cannot quite + * abort if we need to update the data size. + */ + if (unlikely(new_alloc_size <= allocated_size)) { + ntfs_debug("Allocated size already exceeds requested size."); + new_alloc_size = allocated_size; + if (new_data_size < 0) + goto done; + /* + * We want the first attribute extent so that we can update the + * data size. + */ + vcn = 0; + } + err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len, + CASE_SENSITIVE, vcn, NULL, 0, ctx); + if (unlikely(err)) { + if (err == -ENOENT) + err = -EIO; + goto err_out; + } + m = ctx->mrec; + a = ctx->attr; + /* Use goto to reduce indentation. */ + if (a->non_resident) + goto do_non_resident_extend; + BUG_ON(NInoNonResident(ni)); + /* The total length of the attribute value. */ + attr_len = le32_to_cpu(a->data.resident.value_length); + /* + * Extend the attribute record to be able to store the new attribute + * size. ntfs_attr_record_resize() will not do anything if the size is + * not changing. + */ + if (new_alloc_size < vol->mft_record_size && + !ntfs_attr_record_resize(m, a, + le16_to_cpu(a->data.resident.value_offset) + + new_alloc_size)) { + /* The resize succeeded! */ + write_lock_irqsave(&ni->size_lock, flags); + ni->allocated_size = le32_to_cpu(a->length) - + le16_to_cpu(a->data.resident.value_offset); + write_unlock_irqrestore(&ni->size_lock, flags); + if (new_data_size >= 0) { + BUG_ON(new_data_size < attr_len); + a->data.resident.value_length = + cpu_to_le32((u32)new_data_size); + } + goto flush_done; + } + /* + * We have to drop all the locks so we can call + * ntfs_attr_make_non_resident(). This could be optimised by try- + * locking the first page cache page and only if that fails dropping + * the locks, locking the page, and redoing all the locking and + * lookups. While this would be a huge optimisation, it is not worth + * it as this is definitely a slow code path. + */ + ntfs_attr_put_search_ctx(ctx); + unmap_mft_record(base_ni); + up_write(&ni->runlist.lock); + /* + * Not enough space in the mft record, try to make the attribute + * non-resident and if successful restart the extension process. + */ + err = ntfs_attr_make_non_resident(ni, attr_len); + if (likely(!err)) + goto retry_extend; + /* + * Could not make non-resident. If this is due to this not being + * permitted for this attribute type or there not being enough space, + * try to make other attributes non-resident. Otherwise fail. + */ + if (unlikely(err != -EPERM && err != -ENOSPC)) { + /* Only emit errors when the write will fail completely. */ + read_lock_irqsave(&ni->size_lock, flags); + allocated_size = ni->allocated_size; + read_unlock_irqrestore(&ni->size_lock, flags); + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Cannot extend allocation of " + "inode 0x%lx, attribute type 0x%x, " + "because the conversion from resident " + "to non-resident attribute failed " + "with error code %i.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), err); + if (err != -ENOMEM) + err = -EIO; + goto conv_err_out; + } + /* TODO: Not implemented from here, abort. */ + read_lock_irqsave(&ni->size_lock, flags); + allocated_size = ni->allocated_size; + read_unlock_irqrestore(&ni->size_lock, flags); + if (start < 0 || start >= allocated_size) { + if (err == -ENOSPC) + ntfs_error(vol->sb, "Not enough space in the mft " + "record/on disk for the non-resident " + "attribute value. This case is not " + "implemented yet."); + else /* if (err == -EPERM) */ + ntfs_error(vol->sb, "This attribute type may not be " + "non-resident. This case is not " + "implemented yet."); + } + err = -EOPNOTSUPP; + goto conv_err_out; +#if 0 + // TODO: Attempt to make other attributes non-resident. + if (!err) + goto do_resident_extend; + /* + * Both the attribute list attribute and the standard information + * attribute must remain in the base inode. Thus, if this is one of + * these attributes, we have to try to move other attributes out into + * extent mft records instead. + */ + if (ni->type == AT_ATTRIBUTE_LIST || + ni->type == AT_STANDARD_INFORMATION) { + // TODO: Attempt to move other attributes into extent mft + // records. + err = -EOPNOTSUPP; + if (!err) + goto do_resident_extend; + goto err_out; + } + // TODO: Attempt to move this attribute to an extent mft record, but + // only if it is not already the only attribute in an mft record in + // which case there would be nothing to gain. + err = -EOPNOTSUPP; + if (!err) + goto do_resident_extend; + /* There is nothing we can do to make enough space. )-: */ + goto err_out; +#endif +do_non_resident_extend: + BUG_ON(!NInoNonResident(ni)); + if (new_alloc_size == allocated_size) { + BUG_ON(vcn); + goto alloc_done; + } + /* + * If the data starts after the end of the old allocation, this is a + * $DATA attribute and sparse attributes are enabled on the volume and + * for this inode, then create a sparse region between the old + * allocated size and the start of the data. Otherwise simply proceed + * with filling the whole space between the old allocated size and the + * new allocated size with clusters. + */ + if ((start >= 0 && start <= allocated_size) || ni->type != AT_DATA || + !NVolSparseEnabled(vol) || NInoSparseDisabled(ni)) + goto skip_sparse; + // TODO: This is not implemented yet. We just fill in with real + // clusters for now... + ntfs_debug("Inserting holes is not-implemented yet. Falling back to " + "allocating real clusters instead."); +skip_sparse: + rl = ni->runlist.rl; + if (likely(rl)) { + /* Seek to the end of the runlist. */ + while (rl->length) + rl++; + } + /* If this attribute extent is not mapped, map it now. */ + if (unlikely(!rl || rl->lcn == LCN_RL_NOT_MAPPED || + (rl->lcn == LCN_ENOENT && rl > ni->runlist.rl && + (rl-1)->lcn == LCN_RL_NOT_MAPPED))) { + if (!rl && !allocated_size) + goto first_alloc; + rl = ntfs_mapping_pairs_decompress(vol, a, ni->runlist.rl); + if (IS_ERR(rl)) { + err = PTR_ERR(rl); + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Cannot extend allocation " + "of inode 0x%lx, attribute " + "type 0x%x, because the " + "mapping of a runlist " + "fragment failed with error " + "code %i.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), + err); + if (err != -ENOMEM) + err = -EIO; + goto err_out; + } + ni->runlist.rl = rl; + /* Seek to the end of the runlist. */ + while (rl->length) + rl++; + } + /* + * We now know the runlist of the last extent is mapped and @rl is at + * the end of the runlist. We want to begin allocating clusters + * starting at the last allocated cluster to reduce fragmentation. If + * there are no valid LCNs in the attribute we let the cluster + * allocator choose the starting cluster. + */ + /* If the last LCN is a hole or simillar seek back to last real LCN. */ + while (rl->lcn < 0 && rl > ni->runlist.rl) + rl--; +first_alloc: + // FIXME: Need to implement partial allocations so at least part of the + // write can be performed when start >= 0. (Needed for POSIX write(2) + // conformance.) + rl2 = ntfs_cluster_alloc(vol, allocated_size >> vol->cluster_size_bits, + (new_alloc_size - allocated_size) >> + vol->cluster_size_bits, (rl && (rl->lcn >= 0)) ? + rl->lcn + rl->length : -1, DATA_ZONE, TRUE); + if (IS_ERR(rl2)) { + err = PTR_ERR(rl2); + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Cannot extend allocation of " + "inode 0x%lx, attribute type 0x%x, " + "because the allocation of clusters " + "failed with error code %i.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), err); + if (err != -ENOMEM && err != -ENOSPC) + err = -EIO; + goto err_out; + } + rl = ntfs_runlists_merge(ni->runlist.rl, rl2); + if (IS_ERR(rl)) { + err = PTR_ERR(rl); + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Cannot extend allocation of " + "inode 0x%lx, attribute type 0x%x, " + "because the runlist merge failed " + "with error code %i.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), err); + if (err != -ENOMEM) + err = -EIO; + if (ntfs_cluster_free_from_rl(vol, rl2)) { + ntfs_error(vol->sb, "Failed to release allocated " + "cluster(s) in error code path. Run " + "chkdsk to recover the lost " + "cluster(s)."); + NVolSetErrors(vol); + } + ntfs_free(rl2); + goto err_out; + } + ni->runlist.rl = rl; + ntfs_debug("Allocated 0x%llx clusters.", (long long)(new_alloc_size - + allocated_size) >> vol->cluster_size_bits); + /* Find the runlist element with which the attribute extent starts. */ + ll = sle64_to_cpu(a->data.non_resident.lowest_vcn); + rl2 = ntfs_rl_find_vcn_nolock(rl, ll); + BUG_ON(!rl2); + BUG_ON(!rl2->length); + BUG_ON(rl2->lcn < LCN_HOLE); + mp_rebuilt = FALSE; + /* Get the size for the new mapping pairs array for this extent. */ + mp_size = ntfs_get_size_for_mapping_pairs(vol, rl2, ll, -1); + if (unlikely(mp_size <= 0)) { + err = mp_size; + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Cannot extend allocation of " + "inode 0x%lx, attribute type 0x%x, " + "because determining the size for the " + "mapping pairs failed with error code " + "%i.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), err); + err = -EIO; + goto undo_alloc; + } + /* Extend the attribute record to fit the bigger mapping pairs array. */ + attr_len = le32_to_cpu(a->length); + err = ntfs_attr_record_resize(m, a, mp_size + + le16_to_cpu(a->data.non_resident.mapping_pairs_offset)); + if (unlikely(err)) { + BUG_ON(err != -ENOSPC); + // TODO: Deal with this by moving this extent to a new mft + // record or by starting a new extent in a new mft record, + // possibly by extending this extent partially and filling it + // and creating a new extent for the remainder, or by making + // other attributes non-resident and/or by moving other + // attributes out of this mft record. + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Not enough space in the mft " + "record for the extended attribute " + "record. This case is not " + "implemented yet."); + err = -EOPNOTSUPP; + goto undo_alloc; + } + mp_rebuilt = TRUE; + /* Generate the mapping pairs array directly into the attr record. */ + err = ntfs_mapping_pairs_build(vol, (u8*)a + + le16_to_cpu(a->data.non_resident.mapping_pairs_offset), + mp_size, rl2, ll, -1, NULL); + if (unlikely(err)) { + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Cannot extend allocation of " + "inode 0x%lx, attribute type 0x%x, " + "because building the mapping pairs " + "failed with error code %i.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), err); + err = -EIO; + goto undo_alloc; + } + /* Update the highest_vcn. */ + a->data.non_resident.highest_vcn = cpu_to_sle64((new_alloc_size >> + vol->cluster_size_bits) - 1); + /* + * We now have extended the allocated size of the attribute. Reflect + * this in the ntfs_inode structure and the attribute record. + */ + if (a->data.non_resident.lowest_vcn) { + /* + * We are not in the first attribute extent, switch to it, but + * first ensure the changes will make it to disk later. + */ + flush_dcache_mft_record_page(ctx->ntfs_ino); + mark_mft_record_dirty(ctx->ntfs_ino); + ntfs_attr_reinit_search_ctx(ctx); + err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len, + CASE_SENSITIVE, 0, NULL, 0, ctx); + if (unlikely(err)) + goto restore_undo_alloc; + /* @m is not used any more so no need to set it. */ + a = ctx->attr; + } + write_lock_irqsave(&ni->size_lock, flags); + ni->allocated_size = new_alloc_size; + a->data.non_resident.allocated_size = cpu_to_sle64(new_alloc_size); + /* + * FIXME: This would fail if @ni is a directory, $MFT, or an index, + * since those can have sparse/compressed set. For example can be + * set compressed even though it is not compressed itself and in that + * case the bit means that files are to be created compressed in the + * directory... At present this is ok as this code is only called for + * regular files, and only for their $DATA attribute(s). + * FIXME: The calculation is wrong if we created a hole above. For now + * it does not matter as we never create holes. + */ + if (NInoSparse(ni) || NInoCompressed(ni)) { + ni->itype.compressed.size += new_alloc_size - allocated_size; + a->data.non_resident.compressed_size = + cpu_to_sle64(ni->itype.compressed.size); + vi->i_blocks = ni->itype.compressed.size >> 9; + } else + vi->i_blocks = new_alloc_size >> 9; + write_unlock_irqrestore(&ni->size_lock, flags); +alloc_done: + if (new_data_size >= 0) { + BUG_ON(new_data_size < + sle64_to_cpu(a->data.non_resident.data_size)); + a->data.non_resident.data_size = cpu_to_sle64(new_data_size); + } +flush_done: + /* Ensure the changes make it to disk. */ + flush_dcache_mft_record_page(ctx->ntfs_ino); + mark_mft_record_dirty(ctx->ntfs_ino); +done: + ntfs_attr_put_search_ctx(ctx); + unmap_mft_record(base_ni); + up_write(&ni->runlist.lock); + ntfs_debug("Done, new_allocated_size 0x%llx.", + (unsigned long long)new_alloc_size); + return new_alloc_size; +restore_undo_alloc: + if (start < 0 || start >= allocated_size) + ntfs_error(vol->sb, "Cannot complete extension of allocation " + "of inode 0x%lx, attribute type 0x%x, because " + "lookup of first attribute extent failed with " + "error code %i.", vi->i_ino, + (unsigned)le32_to_cpu(ni->type), err); + if (err == -ENOENT) + err = -EIO; + ntfs_attr_reinit_search_ctx(ctx); + if (ntfs_attr_lookup(ni->type, ni->name, ni->name_len, CASE_SENSITIVE, + allocated_size >> vol->cluster_size_bits, NULL, 0, + ctx)) { + ntfs_error(vol->sb, "Failed to find last attribute extent of " + "attribute in error code path. Run chkdsk to " + "recover."); + write_lock_irqsave(&ni->size_lock, flags); + ni->allocated_size = new_alloc_size; + /* + * FIXME: This would fail if @ni is a directory... See above. + * FIXME: The calculation is wrong if we created a hole above. + * For now it does not matter as we never create holes. + */ + if (NInoSparse(ni) || NInoCompressed(ni)) { + ni->itype.compressed.size += new_alloc_size - + allocated_size; + vi->i_blocks = ni->itype.compressed.size >> 9; + } else + vi->i_blocks = new_alloc_size >> 9; + write_unlock_irqrestore(&ni->size_lock, flags); + ntfs_attr_put_search_ctx(ctx); + unmap_mft_record(base_ni); + up_write(&ni->runlist.lock); + /* + * The only thing that is now wrong is the allocated size of the + * base attribute extent which chkdsk should be able to fix. + */ + NVolSetErrors(vol); + return err; + } + ctx->attr->data.non_resident.highest_vcn = cpu_to_sle64( + (allocated_size >> vol->cluster_size_bits) - 1); +undo_alloc: + ll = allocated_size >> vol->cluster_size_bits; + if (ntfs_cluster_free(ni, ll, -1, ctx) < 0) { + ntfs_error(vol->sb, "Failed to release allocated cluster(s) " + "in error code path. Run chkdsk to recover " + "the lost cluster(s)."); + NVolSetErrors(vol); + } + m = ctx->mrec; + a = ctx->attr; + /* + * If the runlist truncation fails and/or the search context is no + * longer valid, we cannot resize the attribute record or build the + * mapping pairs array thus we mark the inode bad so that no access to + * the freed clusters can happen. + */ + if (ntfs_rl_truncate_nolock(vol, &ni->runlist, ll) || IS_ERR(m)) { + ntfs_error(vol->sb, "Failed to %s in error code path. Run " + "chkdsk to recover.", IS_ERR(m) ? + "restore attribute search context" : + "truncate attribute runlist"); + make_bad_inode(vi); + make_bad_inode(VFS_I(base_ni)); + NVolSetErrors(vol); + } else if (mp_rebuilt) { + if (ntfs_attr_record_resize(m, a, attr_len)) { + ntfs_error(vol->sb, "Failed to restore attribute " + "record in error code path. Run " + "chkdsk to recover."); + make_bad_inode(vi); + make_bad_inode(VFS_I(base_ni)); + NVolSetErrors(vol); + } else /* if (success) */ { + if (ntfs_mapping_pairs_build(vol, (u8*)a + le16_to_cpu( + a->data.non_resident. + mapping_pairs_offset), attr_len - + le16_to_cpu(a->data.non_resident. + mapping_pairs_offset), rl2, ll, -1, + NULL)) { + ntfs_error(vol->sb, "Failed to restore " + "mapping pairs array in error " + "code path. Run chkdsk to " + "recover."); + make_bad_inode(vi); + make_bad_inode(VFS_I(base_ni)); + NVolSetErrors(vol); + } + flush_dcache_mft_record_page(ctx->ntfs_ino); + mark_mft_record_dirty(ctx->ntfs_ino); + } + } +err_out: + if (ctx) + ntfs_attr_put_search_ctx(ctx); + if (m) + unmap_mft_record(base_ni); + up_write(&ni->runlist.lock); +conv_err_out: + ntfs_debug("Failed. Returning error code %i.", err); + return err; +} + +/** * ntfs_attr_set - fill (a part of) an attribute with a byte * @ni: ntfs inode describing the attribute to fill * @ofs: offset inside the attribute at which to start to fill |
