diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/libata-core.c | 32 | ||||
| -rw-r--r-- | drivers/scsi/libata.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/sata_sil24.c | 2 |
3 files changed, 19 insertions, 19 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 509178c3700c..196c09ff5e71 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1465,7 +1465,7 @@ static int ata_bus_probe(struct ata_port *ap) tries[dev->devno] = 0; break; case -EIO: - ata_down_sata_spd_limit(ap); + sata_down_spd_limit(ap); /* fall through */ default: tries[dev->devno]--; @@ -1640,12 +1640,12 @@ void ata_port_disable(struct ata_port *ap) } /** - * ata_down_sata_spd_limit - adjust SATA spd limit downward + * sata_down_spd_limit - adjust SATA spd limit downward * @ap: Port to adjust SATA spd limit for * * Adjust SATA spd limit of @ap downward. Note that this * function only adjusts the limit. The change must be applied - * using ata_set_sata_spd(). + * using sata_set_spd(). * * LOCKING: * Inherited from caller. @@ -1653,7 +1653,7 @@ void ata_port_disable(struct ata_port *ap) * RETURNS: * 0 on success, negative errno on failure */ -int ata_down_sata_spd_limit(struct ata_port *ap) +int sata_down_spd_limit(struct ata_port *ap) { u32 spd, mask; int highbit; @@ -1683,7 +1683,7 @@ int ata_down_sata_spd_limit(struct ata_port *ap) return 0; } -static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) +static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) { u32 spd, limit; @@ -1699,7 +1699,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) } /** - * ata_set_sata_spd_needed - is SATA spd configuration needed + * sata_set_spd_needed - is SATA spd configuration needed * @ap: Port in question * * Test whether the spd limit in SControl matches @@ -1713,7 +1713,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol) * RETURNS: * 1 if SATA spd configuration is needed, 0 otherwise. */ -int ata_set_sata_spd_needed(struct ata_port *ap) +int sata_set_spd_needed(struct ata_port *ap) { u32 scontrol; @@ -1722,11 +1722,11 @@ int ata_set_sata_spd_needed(struct ata_port *ap) scontrol = scr_read(ap, SCR_CONTROL); - return __ata_set_sata_spd_needed(ap, &scontrol); + return __sata_set_spd_needed(ap, &scontrol); } /** - * ata_set_sata_spd - set SATA spd according to spd limit + * sata_set_spd - set SATA spd according to spd limit * @ap: Port to set SATA spd for * * Set SATA spd of @ap according to sata_spd_limit. @@ -1738,7 +1738,7 @@ int ata_set_sata_spd_needed(struct ata_port *ap) * 0 if spd doesn't need to be changed, 1 if spd has been * changed. -EOPNOTSUPP if SCR registers are inaccessible. */ -int ata_set_sata_spd(struct ata_port *ap) +int sata_set_spd(struct ata_port *ap) { u32 scontrol; @@ -1746,7 +1746,7 @@ int ata_set_sata_spd(struct ata_port *ap) return -EOPNOTSUPP; scontrol = scr_read(ap, SCR_CONTROL); - if (!__ata_set_sata_spd_needed(ap, &scontrol)) + if (!__sata_set_spd_needed(ap, &scontrol)) return 0; scr_write(ap, SCR_CONTROL, scontrol); @@ -2464,7 +2464,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) DPRINTK("ENTER\n"); - if (ata_set_sata_spd_needed(ap)) { + if (sata_set_spd_needed(ap)) { /* SATA spec says nothing about how to reconfigure * spd. To be on the safe side, turn off phy during * reconfiguration. This works for at least ICH7 AHCI @@ -2474,7 +2474,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) scontrol = (scontrol & 0x0f0) | 0x302; scr_write_flush(ap, SCR_CONTROL, scontrol); - ata_set_sata_spd(ap); + sata_set_spd(ap); } /* issue phy wake/reset */ @@ -2657,7 +2657,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, if (probeinit) probeinit(ap); - if (softreset && !ata_set_sata_spd_needed(ap)) { + if (softreset && !sata_set_spd_needed(ap)) { rc = ata_do_reset(ap, softreset, postreset, classes); if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) goto done; @@ -2677,7 +2677,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, break; } - if (ata_down_sata_spd_limit(ap)) + if (sata_down_spd_limit(ap)) goto done; printk(KERN_INFO "ata%u: hardreset failed, will retry " @@ -5113,7 +5113,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); EXPORT_SYMBOL_GPL(ata_bmdma_status); EXPORT_SYMBOL_GPL(ata_bmdma_stop); EXPORT_SYMBOL_GPL(ata_port_probe); -EXPORT_SYMBOL_GPL(ata_set_sata_spd); +EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 3f8b0a863781..26975df9a3fc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -51,8 +51,8 @@ extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen); -extern int ata_down_sata_spd_limit(struct ata_port *ap); -extern int ata_set_sata_spd_needed(struct ata_port *ap); +extern int sata_down_spd_limit(struct ata_port *ap); +extern int sata_set_spd_needed(struct ata_port *ap); extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev, int force_pio0); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index e9fd869140c5..8c167250f4c9 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -528,7 +528,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) u32 tmp; /* sil24 does the right thing(tm) without any protection */ - ata_set_sata_spd(ap); + sata_set_spd(ap); tout_msec = 100; if (sata_dev_present(ap)) |
