diff options
Diffstat (limited to 'drivers')
71 files changed, 223 insertions, 168 deletions
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 7289da3c4db6..0d11d6e6abd6 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -71,7 +71,7 @@ EXPORT_SYMBOL(acpi_in_debugger); extern char line_buf[80]; #endif /*ENABLE_DEBUGGER*/ -int acpi_specific_hotkey_enabled; +int acpi_specific_hotkey_enabled = TRUE; EXPORT_SYMBOL(acpi_specific_hotkey_enabled); static unsigned int acpi_irq_irq; @@ -1162,11 +1162,11 @@ __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup); int __init acpi_hotkey_setup(char *str) { - acpi_specific_hotkey_enabled = TRUE; + acpi_specific_hotkey_enabled = FALSE; return 1; } -__setup("acpi_specific_hotkey", acpi_hotkey_setup); +__setup("acpi_generic_hotkey", acpi_hotkey_setup); /* * max_cstate is defined in the base kernel so modules can diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 96fe2f956754..ab53832d57e5 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -180,7 +180,9 @@ static ssize_t driver_bind(struct device_driver *drv, up(&dev->sem); put_device(dev); } - return err; + if (err) + return err; + return count; } static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind); diff --git a/drivers/base/class.c b/drivers/base/class.c index 479c12570881..0154a1623b21 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -299,6 +299,11 @@ static void class_dev_release(struct kobject * kobj) pr_debug("device class '%s': release.\n", cd->class_id); + if (cd->devt_attr) { + kfree(cd->devt_attr); + cd->devt_attr = NULL; + } + if (cls->release) cls->release(cd); else { @@ -591,11 +596,8 @@ void class_device_del(struct class_device *class_dev) if (class_dev->dev) sysfs_remove_link(&class_dev->kobj, "device"); - if (class_dev->devt_attr) { + if (class_dev->devt_attr) class_device_remove_file(class_dev, class_dev->devt_attr); - kfree(class_dev->devt_attr); - class_dev->devt_attr = NULL; - } class_device_remove_attrs(class_dev); kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE); diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 4f27e5519296..7333b41d4224 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -80,7 +80,7 @@ config SERIAL_NONSTANDARD config COMPUTONE tristate "Computone IntelliPort Plus serial support" - depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32) ---help--- This driver supports the entire family of Intelliport II/Plus controllers with the exception of the MicroChannel controllers and @@ -138,7 +138,7 @@ config CYZ_INTR config DIGIEPCA tristate "Digiboard Intelligent Async Support" - depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP + depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN) ---help--- This is a driver for Digi International's Xx, Xeve, and Xem series of cards which provide multiple serial ports. You would need @@ -208,7 +208,7 @@ config SYNCLINK config SYNCLINKMP tristate "SyncLink Multiport support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32) help Enable support for the SyncLink Multiport (2 or 4 ports) serial adapter, running asynchronous and HDLC communications up @@ -735,7 +735,7 @@ config SGI_IP27_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !PPC64 + depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32 ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 5f33df47aa74..1cadd2c3cadd 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -764,6 +764,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDEDMA_PMAC bool "PowerMac IDE DMA support" depends on BLK_DEV_IDE_PMAC + select BLK_DEV_IDEDMA_PCI help This option allows the driver for the built-in IDE controller on Power Macintoshes and PowerBooks to use DMA (direct memory access) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 9eab6426148e..29c22fc278c6 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -317,7 +317,7 @@ typedef struct ide_floppy_obj { unsigned long flags; } idefloppy_floppy_t; -#define IDEFLOPPY_TICKS_DELAY 3 /* default delay for ZIP 100 */ +#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ /* * Floppy flag bits values. diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index da46577380f3..6e3ab0c38c4d 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -173,6 +173,12 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = { .channels = 2, .autodma = NOAUTODMA, .bootable = ON_BOARD, + },{ /* 14 */ + .name = "Revolution", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, } }; @@ -231,6 +237,7 @@ static struct pci_device_id generic_pci_tbl[] = { { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11}, { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12}, { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13}, + { PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14}, /* Must come last. If you add entries adjust this table appropriately and the init_one code */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0}, { 0, }, diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index c6f5fa4b4ca6..ff2e217a8c84 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -21,6 +21,9 @@ * * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) * + * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE + * controller same as the CSB6. Single channel ATA100 only. + * * Documentation: * Available under NDA only. Errata info very hard to get. * @@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive) if (!svwks_revision) pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); + if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) + return 2; if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { u32 reg = 0; if (isa_dev) @@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev) case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: return 1; default: break; @@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(dev, 0x5A, btr); } + /* Setup HT1000 SouthBridge Controller - Single Channel Only */ + else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) { + pci_read_config_byte(dev, 0x5A, &btr); + btr &= ~0x40; + btr |= 0x3; + pci_write_config_byte(dev, 0x5A, btr); + } return (dev->irq) ? dev->irq : 0; } @@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = { .channels = 1, /* 2 */ .autodma = AUTODMA, .bootable = ON_BOARD, + },{ /* 4 */ + .name = "SvrWks HT1000", + .init_setup = init_setup_svwks, + .init_chipset = init_chipset_svwks, + .init_hwif = init_hwif_svwks, + .init_dma = init_dma_svwks, + .channels = 1, /* 2 */ + .autodma = AUTODMA, + .bootable = ON_BOARD, } }; @@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = { { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, { 0, }, }; MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index be0fcc8f4b15..ea65b070a367 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1664,7 +1664,7 @@ static struct macio_driver pmac_ide_macio_driver = }; static struct pci_device_id pmac_ide_pci_match[] = { - { PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA, diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 77da827b2898..18ed7765417c 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -229,6 +229,7 @@ second_chance_to_dma: case PCI_DEVICE_ID_AMD_VIPER_7409: case PCI_DEVICE_ID_CMD_643: case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + case PCI_DEVICE_ID_REVOLUTION: simplex_stat = hwif->INB(dma_base + 2); hwif->OUTB((simplex_stat&0x60),(dma_base + 2)); simplex_stat = hwif->INB(dma_base + 2); diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 79c8e2dd9c33..32cdfb30e9b4 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -1,6 +1,7 @@ menu "InfiniBand support" config INFINIBAND + depends on PCI || BROKEN tristate "InfiniBand support" ---help--- Core support for InfiniBand (IB). Make sure to also select diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 6c7b8bffc6fd..801c98f30e5c 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -134,6 +134,7 @@ config HISAX_AVM_A1 config HISAX_FRITZPCI bool "AVM PnP/PCI (Fritz!PnP/PCI)" + depends on BROKEN || !PPC64 help This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI". See <file:Documentation/isdn/README.HiSax> on how to configure it. diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 65ab64c43b3e..bc3e096d84f7 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -103,7 +103,7 @@ config PMAC_MEDIABAY # on non-powerbook machines (but only on PMU based ones AFAIK) config PMAC_BACKLIGHT bool "Backlight control for LCD screens" - depends on ADB_PMU + depends on ADB_PMU && (BROKEN || !PPC64) help Say Y here to build in code to manage the LCD backlight on a Macintosh PowerBook. With this code, the backlight will be turned diff --git a/drivers/md/md.c b/drivers/md/md.c index 480f658db6f2..486ee50cfdda 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -256,8 +256,7 @@ static inline void mddev_unlock(mddev_t * mddev) { up(&mddev->reconfig_sem); - if (mddev->thread) - md_wakeup_thread(mddev->thread); + md_wakeup_thread(mddev->thread); } mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr) @@ -623,6 +622,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) mddev->raid_disks = sb->raid_disks; mddev->size = sb->size; mddev->events = md_event(sb); + mddev->bitmap_offset = 0; if (sb->state & (1<<MD_SB_CLEAN)) mddev->recovery_cp = MaxSector; @@ -938,6 +938,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev) mddev->raid_disks = le32_to_cpu(sb->raid_disks); mddev->size = le64_to_cpu(sb->size)/2; mddev->events = le64_to_cpu(sb->events); + mddev->bitmap_offset = 0; mddev->recovery_cp = le64_to_cpu(sb->resync_offset); memcpy(mddev->uuid, sb->set_uuid, 16); @@ -1712,6 +1713,7 @@ static int do_md_run(mddev_t * mddev) mddev->in_sync = 1; set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + md_wakeup_thread(mddev->thread); if (mddev->sb_dirty) md_update_sb(mddev); @@ -1824,6 +1826,7 @@ static int do_md_stop(mddev_t * mddev, int ro) fput(mddev->bitmap_file); mddev->bitmap_file = NULL; } + mddev->bitmap_offset = 0; /* * Free resources if final stop @@ -2233,8 +2236,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) export_rdev(rdev); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - if (mddev->thread) - md_wakeup_thread(mddev->thread); + md_wakeup_thread(mddev->thread); return err; } diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ac81e5e01a9a..3f5742396096 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -356,7 +356,7 @@ config VIDEO_M32R_AR config VIDEO_M32R_AR_M64278 tristate "Use Colour AR module M64278(VGA)" - depends on VIDEO_M32R_AR + depends on VIDEO_M32R_AR && PLAT_M32700UT ---help--- Say Y here to use the Renesas M64278E-800 camera module, which supports VGA(640x480 pixcels) size of images. diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 7b293f01c9ed..34b80de34fae 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1897,6 +1897,7 @@ static int cp_resume (struct pci_dev *pdev) { struct net_device *dev; struct cp_private *cp; + unsigned long flags; dev = pci_get_drvdata (pdev); cp = netdev_priv(dev); @@ -1910,6 +1911,12 @@ static int cp_resume (struct pci_dev *pdev) cp_init_hw (cp); netif_start_queue (dev); + + spin_lock_irqsave (&cp->lock, flags); + + mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE); + + spin_unlock_irqrestore (&cp->lock, flags); return 0; } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a835eb58808..8edb6936fb9b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1145,7 +1145,7 @@ config IBMVETH be called ibmveth. config IBM_EMAC - tristate "IBM PPC4xx EMAC driver support" + bool "IBM PPC4xx EMAC driver support" depends on 4xx select CRC32 ---help--- @@ -1154,7 +1154,7 @@ config IBM_EMAC config IBM_EMAC_ERRMSG bool "Verbose error messages" - depends on IBM_EMAC + depends on IBM_EMAC && BROKEN config IBM_EMAC_RXB int "Number of receive buffers" diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 5fddc0ff8878..6440a892bb81 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -48,6 +48,10 @@ * net_device_stats * * introduced tx_timeout function * * reworked locking + * + * 01-Jul-2005 Ben Dooks <ben@simtec.co.uk> + * * fixed spinlock call without pointer + * * ensure spinlock is initialised */ #include <linux/module.h> @@ -148,7 +152,6 @@ static int dm9000_probe(struct device *); static int dm9000_open(struct net_device *); static int dm9000_start_xmit(struct sk_buff *, struct net_device *); static int dm9000_stop(struct net_device *); -static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int); static void dm9000_timer(unsigned long); @@ -322,7 +325,7 @@ static void dm9000_timeout(struct net_device *dev) /* Save previous register address */ reg_save = readb(db->io_addr); - spin_lock_irqsave(db->lock,flags); + spin_lock_irqsave(&db->lock,flags); netif_stop_queue(dev); dm9000_reset(db); @@ -333,7 +336,7 @@ static void dm9000_timeout(struct net_device *dev) /* Restore previous register address */ writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(db->lock,flags); + spin_unlock_irqrestore(&db->lock,flags); } @@ -387,8 +390,6 @@ dm9000_probe(struct device *dev) int i; u32 id_val; - printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME); - /* Init network device */ ndev = alloc_etherdev(sizeof (struct board_info)); if (!ndev) { @@ -405,6 +406,8 @@ dm9000_probe(struct device *dev) db = (struct board_info *) ndev->priv; memset(db, 0, sizeof (*db)); + spin_lock_init(&db->lock); + if (pdev->num_resources < 2) { ret = -ENODEV; goto out; @@ -541,7 +544,6 @@ dm9000_probe(struct device *dev) ndev->stop = &dm9000_stop; ndev->get_stats = &dm9000_get_stats; ndev->set_multicast_list = &dm9000_hash_table; - ndev->do_ioctl = &dm9000_do_ioctl; #ifdef DM9000_PROGRAM_EEPROM program_eeprom(db); @@ -612,7 +614,7 @@ dm9000_open(struct net_device *dev) /* set and active a timer process */ init_timer(&db->timer); - db->timer.expires = DM9000_TIMER_WUT * 2; + db->timer.expires = DM9000_TIMER_WUT; db->timer.data = (unsigned long) dev; db->timer.function = &dm9000_timer; add_timer(&db->timer); @@ -845,15 +847,6 @@ dm9000_get_stats(struct net_device *dev) return &db->stats; } -/* - * Process the upper socket ioctl command - */ -static int -dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - PRINTK1("entering %s\n",__FUNCTION__); - return 0; -} /* * A periodic timer routine @@ -864,21 +857,11 @@ dm9000_timer(unsigned long data) { struct net_device *dev = (struct net_device *) data; board_info_t *db = (board_info_t *) dev->priv; - u8 reg_save; - unsigned long flags; PRINTK3("dm9000_timer()\n"); - spin_lock_irqsave(db->lock,flags); - /* Save previous register address */ - reg_save = readb(db->io_addr); - mii_check_media(&db->mii, netif_msg_link(db), 0); - /* Restore previous register address */ - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(db->lock,flags); - /* Set timer again */ db->timer.expires = DM9000_TIMER_WUT; add_timer(&db->timer); @@ -1098,9 +1081,14 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) { board_info_t *db = (board_info_t *) dev->priv; unsigned long flags; + unsigned int reg_save; int ret; spin_lock_irqsave(&db->lock,flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + /* Fill the phyxcer register into REG_0C */ iow(db, DM9000_EPAR, DM9000_PHY | reg); @@ -1111,6 +1099,9 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) /* The read data keeps on REG_0D & REG_0E */ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + /* restore the previous address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock,flags); return ret; @@ -1124,9 +1115,13 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) { board_info_t *db = (board_info_t *) dev->priv; unsigned long flags; + unsigned long reg_save; spin_lock_irqsave(&db->lock,flags); + /* Save previous register address */ + reg_save = readb(db->io_addr); + /* Fill the phyxcer register into REG_0C */ iow(db, DM9000_EPAR, DM9000_PHY | reg); @@ -1138,6 +1133,9 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) udelay(500); /* Wait write complete */ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + /* restore the previous address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock,flags); } @@ -1202,6 +1200,8 @@ static struct device_driver dm9000_driver = { static int __init dm9000_init(void) { + printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME); + return driver_register(&dm9000_driver); /* search board and register */ } diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 6482d994d489..c7fb3675c09d 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1712,11 +1712,10 @@ struct mal_commac_ops emac_commac_ops = { }; #ifdef CONFIG_NET_POLL_CONTROLLER -static int emac_netpoll(struct net_device *ndev) +static void emac_netpoll(struct net_device *ndev) { emac_rxeob_dev((void *)ndev, 0); emac_txeob_dev((void *)ndev, 0); - return 0; } #endif diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c index d520b5920d6c..49e5467bdd73 100644 --- a/drivers/net/ioc3-eth.c +++ b/drivers/net/ioc3-eth.c @@ -499,7 +499,7 @@ static int ioc3_mdio_read(struct net_device *dev, int phy, int reg) ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG); while (ioc3_r_micr() & MICR_BUSY); - return ioc3_r_micr() & MIDR_DATA_MASK; + return ioc3_r_midr_r() & MIDR_DATA_MASK; } static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data) @@ -1291,7 +1291,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev->features = NETIF_F_IP_CSUM; #endif - ioc3_setup_duplex(ip); sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1); sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2); @@ -1300,6 +1299,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto out_stop; mii_check_media(&ip->mii, 1, 1); + ioc3_setup_duplex(ip); vendor = (sw_physid1 << 12) | (sw_physid2 >> 4); model = (sw_physid2 >> 4) & 0x3f; @@ -1524,7 +1524,7 @@ static void ioc3_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) { struct ioc3_private *ip = netdev_priv(dev); - + strcpy (info->driver, IOC3_NAME); strcpy (info->version, IOC3_VERSION); strcpy (info->bus_info, pci_name(ip->pdev)); @@ -1550,7 +1550,7 @@ static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) spin_lock_irq(&ip->ioc3_lock); rc = mii_ethtool_sset(&ip->mii, cmd); spin_unlock_irq(&ip->ioc3_lock); - + return rc; } diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index b33111e21313..1f61f0cc95d8 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -214,7 +214,7 @@ struct net_device loopback_dev = { .ethtool_ops = &loopback_ethtool_ops, }; -/* Setup and register the of the LOOPBACK device. */ +/* Setup and register the loopback device. */ int __init loopback_init(void) { struct net_device_stats *stats; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 368b8fb14023..01419aff333e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.35" -#define DRV_MODULE_RELDATE "August 6, 2005" +#define DRV_MODULE_VERSION "3.36" +#define DRV_MODULE_RELDATE "August 19, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -8970,6 +8970,8 @@ static int __devinit tg3_phy_probe(struct tg3 *tp) tp->phy_id = hw_phy_id; if (hw_phy_id_masked == PHY_ID_BCM8002) tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES; + else + tp->tg3_flags2 &= ~TG3_FLG2_PHY_SERDES; } else { if (tp->phy_id != PHY_ID_INVALID) { /* Do nothing, phy ID already set up in diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig index 23d0fa4bbceb..7e99e9f8045e 100644 --- a/drivers/net/tokenring/Kconfig +++ b/drivers/net/tokenring/Kconfig @@ -84,7 +84,7 @@ config 3C359 config TMS380TR tristate "Generic TMS380 Token Ring ISA/PCI adapter support" - depends on TR && (PCI || ISA) + depends on TR && (PCI || ISA && ISA_DMA_API) select FW_LOADER ---help--- This driver provides generic support for token ring adapters diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index ff5b1b1de2fa..5d814dfc8bc0 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -374,7 +374,7 @@ config PCMCIA_HERMES config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on NET_RADIO && PCMCIA + depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) ---help--- This is the standard Linux driver to support Cisco/Aironet PCMCIA 802.11 wireless cards. This driver is the same as the Aironet diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 16a2e6ae37f4..725a14119f2a 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -34,7 +34,7 @@ config PARPORT config PARPORT_PC tristate "PC-style hardware" - depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 + depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R ---help--- You should say Y here if you have a PC-style parallel port. All IBM PC compatible computers and some Alphas have PC-style diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 46b294a12418..2b92b9e8c910 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ #ifndef _PCIEHP_H diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index df4915dbc321..cafc7eadcf80 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 0dbcf04aa35e..0e0947601526 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 1cda30bd6e47..7a0e27f0e063 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 723b12c0bb7c..33b539b34f7e 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/pciehprm.h b/drivers/pci/hotplug/pciehprm.h index 966775ffb0ff..05f20fbc5f50 100644 --- a/drivers/pci/hotplug/pciehprm.h +++ b/drivers/pci/hotplug/pciehprm.h @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/pciehprm_acpi.c b/drivers/pci/hotplug/pciehprm_acpi.c index 57f4e6d1b27c..305b47ec2f2c 100644 --- a/drivers/pci/hotplug/pciehprm_acpi.c +++ b/drivers/pci/hotplug/pciehprm_acpi.c @@ -20,7 +20,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <dely.l.sy@intel.com> + * Send feedback to <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/pciehprm_nonacpi.c b/drivers/pci/hotplug/pciehprm_nonacpi.c index 79a0aa6238ef..3622965f8961 100644 --- a/drivers/pci/hotplug/pciehprm_nonacpi.c +++ b/drivers/pci/hotplug/pciehprm_nonacpi.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/pciehprm_nonacpi.h b/drivers/pci/hotplug/pciehprm_nonacpi.h index 87c90e85ede9..b10603b0e958 100644 --- a/drivers/pci/hotplug/pciehprm_nonacpi.h +++ b/drivers/pci/hotplug/pciehprm_nonacpi.h @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 67b6a3370ceb..fe4d653da188 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> * */ #ifndef _SHPCHP_H diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index a70a5c5705f2..6f7d8a29957a 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 490a9553a062..783b5abb0717 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 38c5d9066697..8d98410bf1c0 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 90113e9cd69b..d867099114ec 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchprm.h b/drivers/pci/hotplug/shpchprm.h index 88aeb978c911..057b192ce589 100644 --- a/drivers/pci/hotplug/shpchprm.h +++ b/drivers/pci/hotplug/shpchprm.h @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index 7957cdc72cd0..d37b31658edf 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -20,7 +20,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <dely.l.sy@intel.com> + * Send feedback to <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index 37fa77a98289..ba6c549c9b9d 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchprm_legacy.h b/drivers/pci/hotplug/shpchprm_legacy.h index 29ccea5e57e5..21bda74ddfa5 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.h +++ b/drivers/pci/hotplug/shpchprm_legacy.h @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c index 88f4d9f41886..5f75ef7f3df2 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.c +++ b/drivers/pci/hotplug/shpchprm_nonacpi.c @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.h b/drivers/pci/hotplug/shpchprm_nonacpi.h index 6bc8668023c3..cddaaa5ee1b3 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.h +++ b/drivers/pci/hotplug/shpchprm_nonacpi.h @@ -23,7 +23,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com> + * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> * */ diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index b5ab9aa6ff7c..2b85aa39f954 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -453,7 +453,7 @@ static void enable_msi_mode(struct pci_dev *dev, int pos, int type) } } -static void disable_msi_mode(struct pci_dev *dev, int pos, int type) +void disable_msi_mode(struct pci_dev *dev, int pos, int type) { u16 control; @@ -699,6 +699,9 @@ int pci_enable_msi(struct pci_dev* dev) if (!pci_msi_enable || !dev) return status; + if (dev->no_msi) + return status; + temp = dev->irq; if ((status = msi_init()) < 0) diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index d94d7af4f7a0..d00168b1f662 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -47,6 +47,12 @@ extern int pci_msi_quirk; #define pci_msi_quirk 0 #endif +#ifdef CONFIG_PCI_MSI +void disable_msi_mode(struct pci_dev *dev, int pos, int type); +#else +static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { } +#endif + extern int pcie_mch_quirk; extern struct device_attribute pci_dev_attrs[]; extern struct class_device_attribute class_device_attr_cpuaffinity; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a9160ad16581..bb36bb69803f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1291,6 +1291,27 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quir DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch ); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch ); + +/* + * It's possible for the MSI to get corrupted if shpc and acpi + * are used together on certain PXH-based systems. + */ +static void __devinit quirk_pcie_pxh(struct pci_dev *dev) +{ + disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), + PCI_CAP_ID_MSI); + dev->no_msi = 1; + + printk(KERN_WARNING "PCI: PXH quirk detected, " + "disabling MSI for SHPC device\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); + + static void __devinit quirk_netmos(struct pci_dev *dev) { unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 6f9fdb276402..599b116d9747 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -41,6 +41,7 @@ module_param(io_speed, int, 0444); #ifdef CONFIG_PCMCIA_PROBE +#include <asm/irq.h> /* mask of IRQs already reserved by other cards, we should avoid using them */ static u8 pcmcia_used_irq[NR_IRQS]; #endif diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c index add12f7c489a..6e5229e92fbc 100644 --- a/drivers/pnp/card.c +++ b/drivers/pnp/card.c @@ -312,6 +312,8 @@ found: if (drv->link.driver.probe) { if (drv->link.driver.probe(&dev->dev)) { dev->dev.driver = NULL; + dev->card_link = NULL; + up_write(&dev->dev.bus->subsys.rwsem); return NULL; } } diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c index d36258d6665f..533f90c05cdf 100644 --- a/drivers/s390/cio/qdio.c +++ b/drivers/s390/cio/qdio.c @@ -230,7 +230,7 @@ qdio_siga_input(struct qdio_q *q) } /* locked by the locks in qdio_activate and qdio_cleanup */ -static __u32 * volatile +static __u32 volatile * qdio_get_indicator(void) { int i; diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h index 82a1d97001d7..0a3bb5a10dd4 100644 --- a/drivers/s390/crypto/z90crypt.h +++ b/drivers/s390/crypto/z90crypt.h @@ -36,15 +36,6 @@ #define z90crypt_VARIANT 2 // 2 = added PCIXCC MCL3 and CEX2C support /** - * If we are not using the sparse checker, __user has no use. - */ -#ifdef __CHECKER__ -# define __user __attribute__((noderef, address_space(1))) -#else -# define __user -#endif - -/** * struct ica_rsa_modexpo * * Requirements: diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f1e8c4223ed1..12c208fb18c5 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1696,7 +1696,7 @@ config TT_DMA_EMUL config MAC_SCSI bool "Macintosh NCR5380 SCSI" - depends on MAC && SCSI + depends on MAC && SCSI=y help This is the NCR 5380 SCSI controller included on most of the 68030 based Macintoshes. If you have one of these say Y and read the @@ -1717,7 +1717,7 @@ config SCSI_MAC_ESP config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" - depends on MVME147 && SCSI + depends on MVME147 && SCSI=y help Support for the on-board SCSI controller on the Motorola MVME147 single-board computer. @@ -1758,7 +1758,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" - depends on SUN3X && SCSI + depends on SUN3X && SCSI=y help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c5623694d10f..e3b9692b9688 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1105,6 +1105,7 @@ MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("AHCI SATA low-level driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); module_init(ahci_init); module_exit(ahci_exit); diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 54b32868aaf7..13f23043c8a3 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -3,7 +3,7 @@ # config SCSI_ACORNSCSI_3 tristate "Acorn SCSI card (aka30) support" - depends on ARCH_ACORN && SCSI + depends on ARCH_ACORN && SCSI && BROKEN help This enables support for the Acorn SCSI card (aka30). If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index a2cfade2c1c6..d96ebf9d2228 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -32,7 +32,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.03" +#define DRV_VERSION "1.04" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 73b1f72b7e43..f4e7dcb6492b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2268,19 +2268,6 @@ void ata_qc_prep(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) */ - - -/** - * ata_sg_init_one - Prepare a one-entry scatter-gather list. - * @qc: Queued command - * @buf: transfer buffer - * @buflen: length of buf - * - * Builds a single-entry scatter-gather list to initiate a - * transfer utilizing the specified buffer. - * - * LOCKING: - */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2312,18 +2299,6 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * spin_lock_irqsave(host_set lock) */ - -/** - * ata_sg_init - Assign a scatter gather list to a queued command - * @qc: Queued command - * @sg: Scatter-gather list - * @n_elem: length of sg list - * - * Attaches a scatter-gather list to a queued command. - * - * LOCKING: - */ - void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d90430bbb0de..3e7f4843020f 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -26,7 +26,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.11" /* must be exactly four chars */ +#define DRV_VERSION "1.12" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 5c1d4411457a..919fb314ad10 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -40,7 +40,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.01" +#define DRV_VERSION "1.02" enum { diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 97034d3937fd..d5797618a3b9 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -211,7 +211,7 @@ comment "Non-8250 serial port support" config SERIAL_AMBA_PL010 tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) select SERIAL_CORE help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have @@ -819,7 +819,7 @@ config SERIAL_M32R_SIO_CONSOLE config SERIAL_M32R_PLDSIO bool "M32R SIO I/F on a PLD" - depends on SERIAL_M32R_SIO=y + depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV || PLAT_M32700UT) default n help Say Y here if you want to use the M32R serial controller diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index 0301feacbde4..9b50560b9d16 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -1123,7 +1123,7 @@ static int __init m32r_sio_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -extern struct uart_driver m32r_sio_reg; +static struct uart_driver m32r_sio_reg; static struct console m32r_sio_console = { .name = "ttyS", .write = m32r_sio_console_write, diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 840815fde49b..12d1f14e78ce 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -1093,6 +1093,7 @@ int __init sn_serial_console_early_setup(void) return -1; sal_console_port.sc_ops = &poll_ops; + spin_lock_init(&sal_console_port.sc_port.lock); early_sn_setup(); /* Find SAL entry points */ register_console(&sal_console_early); diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index 02412e31a46b..3b266af3048a 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -342,9 +342,6 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) goto exit; } - x = le16_to_cpu(*(__le16 *) &data[2]); - y = le16_to_cpu(*(__le16 *) &data[4]); - input_regs(dev, regs); if (data[1] & 0x10) { /* in prox */ @@ -373,15 +370,17 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) } } - if (data[1] & 0x80) { + if (data[1] & 0x90) { + x = le16_to_cpu(*(__le16 *) &data[2]); + y = le16_to_cpu(*(__le16 *) &data[4]); input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); - } - if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6])); - input_report_key(dev, BTN_TOUCH, data[1] & 0x01); - input_report_key(dev, BTN_STYLUS, data[1] & 0x02); - input_report_key(dev, BTN_STYLUS2, data[1] & 0x04); + if (wacom->tool[0] != BTN_TOOL_MOUSE) { + input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6])); + input_report_key(dev, BTN_TOUCH, data[1] & 0x01); + input_report_key(dev, BTN_STYLUS, data[1] & 0x02); + input_report_key(dev, BTN_STYLUS2, data[1] & 0x04); + } } input_report_key(dev, wacom->tool[0], data[1] & 0x10); @@ -568,7 +567,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs) /* Cintiq doesn't send data when RDY bit isn't set */ if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) - return; + goto exit; if (wacom->features->type >= INTUOS3) { input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index aa9d00808e4e..508a21028db4 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -2,6 +2,8 @@ * The USB Monitor, inspired by Dave Harding's USBMon. * * mon_main.c: Main file, module initiation and exit, registrations, etc. + * + * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com) */ #include <linux/kernel.h> @@ -311,7 +313,7 @@ static int __init mon_init(void) mondir = debugfs_create_dir("usbmon", NULL); if (IS_ERR(mondir)) { - printk(KERN_NOTICE TAG ": debugs is not available\n"); + printk(KERN_NOTICE TAG ": debugfs is not available\n"); return -ENODEV; } if (mondir == NULL) { diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h index ed35c18a5c44..9b06784d2c48 100644 --- a/drivers/usb/mon/usb_mon.h +++ b/drivers/usb/mon/usb_mon.h @@ -1,5 +1,7 @@ /* * The USB Monitor, inspired by Dave Harding's USBMon. + * + * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com) */ #ifndef __USB_MON_H diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 576f3b852fce..4528a00c45b0 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -1922,7 +1922,7 @@ static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb) // copy the packet data to the new skb memcpy(skb_put(gl_skb, size), packet->packet_data, size); - skb_return (dev, skb); + skb_return (dev, gl_skb); } // advance to the next packet diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 2a1d489e92c0..fc013978837e 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -346,8 +346,7 @@ static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs) if (datalen<14) goto resubmit; if ((seq & IEEE80211_SCTL_FRAG) == 0) { - frag = kmalloc(sizeof(struct zd1201_frag*), - GFP_ATOMIC); + frag = kmalloc(sizeof(*frag), GFP_ATOMIC); if (!frag) goto resubmit; skb = dev_alloc_skb(IEEE80211_DATA_LEN +14+2); diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index cbff98337aa6..5fe182d6e4ab 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,7 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE default y help Saying Y here will allow you to use Linux in text mode through a diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index d2e19f6dd72c..4ff853fbe0be 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -628,7 +628,7 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var) int fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) { - int err; + int err, flags = info->flags; if (var->activate & FB_ACTIVATE_INV_MODE) { struct fb_videomode mode1, mode2; @@ -682,7 +682,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) !list_empty(&info->modelist)) err = fb_add_videomode(&mode, &info->modelist); - if (!err && info->flags & FBINFO_MISC_USEREVENT) { + if (!err && (flags & FBINFO_MISC_USEREVENT)) { struct fb_event event; info->flags &= ~FBINFO_MISC_USEREVENT; diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 298bc9cd99e7..a112a1786855 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -583,23 +583,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } - /* Map the fb and MMIO regions */ - dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache - (dinfo->aperture.physical, dinfo->aperture.size); - if (!dinfo->aperture.virtual) { - ERR_MSG("Cannot remap FB region.\n"); - cleanup(dinfo); - return -ENODEV; - } - dinfo->mmio_base = - (u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys, - INTEL_REG_SIZE); - if (!dinfo->mmio_base) { - ERR_MSG("Cannot remap MMIO region.\n"); - cleanup(dinfo); - return -ENODEV; - } - /* Get the chipset info. */ dinfo->pci_chipset = pdev->device; @@ -630,9 +613,15 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) dinfo->accel = 0; } + if (MB(voffset) < stolen_size) + offset = (stolen_size >> 12); + else + offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE; + /* Framebuffer parameters - Use all the stolen memory if >= vram */ - if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) { + if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) + MB(vram))) { dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size); + dinfo->fb.offset = 0; dinfo->fbmem_gart = 0; } else { dinfo->fb.size = MB(vram); @@ -663,11 +652,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } - if (MB(voffset) < stolen_size) - offset = (stolen_size >> 12); - else - offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE; - /* set the mem offsets - set them after the already used pages */ if (dinfo->accel) { dinfo->ring.offset = offset + gtt_info.current_memory; @@ -682,6 +666,26 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) + (dinfo->cursor.size >> 12); } + /* Map the fb and MMIO regions */ + /* ioremap only up to the end of used aperture */ + dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache + (dinfo->aperture.physical, (dinfo->fb.offset << 12) + + dinfo->fb.size); + if (!dinfo->aperture.virtual) { + ERR_MSG("Cannot remap FB region.\n"); + cleanup(dinfo); + return -ENODEV; + } + + dinfo->mmio_base = + (u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys, + INTEL_REG_SIZE); + if (!dinfo->mmio_base) { + ERR_MSG("Cannot remap MMIO region.\n"); + cleanup(dinfo); + return -ENODEV; + } + /* Allocate memories (which aren't stolen) */ if (dinfo->accel) { if (!(dinfo->gtt_ring_mem = diff --git a/drivers/video/radeonfb.c b/drivers/video/radeonfb.c index c46387024b1d..a78b9bd8f897 100644 --- a/drivers/video/radeonfb.c +++ b/drivers/video/radeonfb.c @@ -80,7 +80,7 @@ #include <video/radeon.h> #include <linux/radeonfb.h> -#define DEBUG 1 +#define DEBUG 0 #if DEBUG #define RTRACE printk |
