diff options
Diffstat (limited to 'drivers/video/backlight/Kconfig')
| -rw-r--r-- | drivers/video/backlight/Kconfig | 116 |
1 files changed, 72 insertions, 44 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index c025c84601b0..e54a337227ea 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -8,12 +8,13 @@ menuconfig BACKLIGHT_LCD_SUPPORT Enable this to be able to choose the drivers for controlling the backlight and the LCD panel on some platforms, for example on PDAs. +if BACKLIGHT_LCD_SUPPORT + # # LCD # config LCD_CLASS_DEVICE tristate "Lowlevel LCD controls" - depends on BACKLIGHT_LCD_SUPPORT default m help This framework adds support for low-level control of LCD. @@ -24,31 +25,32 @@ config LCD_CLASS_DEVICE To have support for your specific LCD panel you will have to select the proper drivers which depend on this option. +if LCD_CLASS_DEVICE + config LCD_CORGI tristate "LCD Panel support for SHARP corgi/spitz model" - depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL + depends on SPI_MASTER && PXA_SHARPSL help Say y here to support the LCD panels usually found on SHARP corgi (C7x0) and spitz (Cxx00) models. config LCD_L4F00242T03 tristate "Epson L4F00242T03 LCD" - depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GENERIC_GPIO help SPI driver for Epson L4F00242T03. This provides basic support for init and powering the LCD up/down through a sysfs interface. config LCD_LMS283GF05 tristate "Samsung LMS283GF05 LCD" - depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GENERIC_GPIO help SPI driver for Samsung LMS283GF05. This provides basic support for powering the LCD up/down through a sysfs interface. config LCD_LTV350QV tristate "Samsung LTV350QV LCD Panel" - depends on LCD_CLASS_DEVICE && SPI_MASTER - default n + depends on SPI_MASTER help If you have a Samsung LTV350QV LCD panel, say y to include a power control driver for it. The panel starts up in power @@ -59,60 +61,61 @@ config LCD_LTV350QV config LCD_ILI9320 tristate - depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT - default n help If you have a panel based on the ILI9320 controller chip then say y to include a power driver for it. config LCD_TDO24M tristate "Toppoly TDO24M and TDO35S LCD Panels support" - depends on LCD_CLASS_DEVICE && SPI_MASTER - default n + depends on SPI_MASTER help If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to include the support for it. config LCD_VGG2432A4 tristate "VGG2432A4 LCM device support" - depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER + depends on SPI_MASTER select LCD_ILI9320 - default n help If you have a VGG2432A4 panel based on the ILI9320 controller chip then say y to include a power driver for it. config LCD_PLATFORM tristate "Platform LCD controls" - depends on LCD_CLASS_DEVICE help This driver provides a platform-device registered LCD power control interface. config LCD_TOSA tristate "Sharp SL-6000 LCD Driver" - depends on LCD_CLASS_DEVICE && SPI - depends on MACH_TOSA - default n + depends on SPI && MACH_TOSA help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its LCD. config LCD_HP700 tristate "HP Jornada 700 series LCD Driver" - depends on LCD_CLASS_DEVICE depends on SA1100_JORNADA720_SSP && !PREEMPT default y help If you have an HP Jornada 700 series handheld (710/720/728) say Y to enable LCD control driver. +config LCD_S6E63M0 + tristate "S6E63M0 AMOLED LCD Driver" + depends on SPI && BACKLIGHT_CLASS_DEVICE + default n + help + If you have an S6E63M0 LCD Panel, say Y to enable its + LCD control driver. + +endif # LCD_CLASS_DEVICE + # # Backlight # config BACKLIGHT_CLASS_DEVICE tristate "Lowlevel Backlight controls" - depends on BACKLIGHT_LCD_SUPPORT default m help This framework adds support for low-level control of the LCD @@ -121,9 +124,11 @@ config BACKLIGHT_CLASS_DEVICE To have support for your specific LCD panel you will have to select the proper drivers which depend on this option. +if BACKLIGHT_CLASS_DEVICE + config BACKLIGHT_ATMEL_LCDC bool "Atmel LCDC Contrast-as-Backlight control" - depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL + depends on FB_ATMEL default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK help This provides a backlight control internal to the Atmel LCDC @@ -136,8 +141,7 @@ config BACKLIGHT_ATMEL_LCDC config BACKLIGHT_ATMEL_PWM tristate "Atmel PWM backlight control" - depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM - default n + depends on ATMEL_PWM help Say Y here if you want to use the PWM peripheral in Atmel AT91 and AVR32 devices. This driver will need additional platform data to know @@ -146,9 +150,18 @@ config BACKLIGHT_ATMEL_PWM To compile this driver as a module, choose M here: the module will be called atmel-pwm-bl. +config BACKLIGHT_EP93XX + tristate "Cirrus EP93xx Backlight Driver" + depends on FB_EP93XX + help + If you have a LCD backlight connected to the BRIGHT output of + the EP93xx, say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called ep93xx_bl. + config BACKLIGHT_GENERIC tristate "Generic (aka Sharp Corgi) Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE default y help Say y to enable the generic platform backlight driver previously @@ -157,7 +170,7 @@ config BACKLIGHT_GENERIC config BACKLIGHT_LOCOMO tristate "Sharp LOCOMO LCD/Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO + depends on SHARP_LOCOMO default y help If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to @@ -165,7 +178,7 @@ config BACKLIGHT_LOCOMO config BACKLIGHT_OMAP1 tristate "OMAP1 PWL-based LCD Backlight" - depends on BACKLIGHT_CLASS_DEVICE && ARCH_OMAP1 + depends on ARCH_OMAP1 default y help This driver controls the LCD backlight level and power for @@ -174,7 +187,7 @@ config BACKLIGHT_OMAP1 config BACKLIGHT_HP680 tristate "HP Jornada 680 Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX + depends on SH_HP6XX default y help If you have a HP Jornada 680, say y to enable the @@ -182,7 +195,6 @@ config BACKLIGHT_HP680 config BACKLIGHT_HP700 tristate "HP Jornada 700 series Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE depends on SA1100_JORNADA720_SSP && !PREEMPT default y help @@ -191,76 +203,70 @@ config BACKLIGHT_HP700 config BACKLIGHT_PROGEAR tristate "Frontpath ProGear Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && PCI && X86 - default n + depends on PCI && X86 help If you have a Frontpath ProGear say Y to enable the backlight driver. config BACKLIGHT_CARILLO_RANCH tristate "Intel Carillo Ranch Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 - default n + depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 help If you have a Intel LE80578 (Carillo Ranch) say Y to enable the backlight driver. config BACKLIGHT_PWM tristate "Generic PWM based Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && HAVE_PWM + depends on HAVE_PWM help If you have a LCD backlight adjustable by PWM, say Y to enable this driver. config BACKLIGHT_DA903X tristate "Backlight Driver for DA9030/DA9034 using WLED" - depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X + depends on PMIC_DA903X help If you have a LCD backlight connected to the WLED output of DA9030 or DA9034 WLED output, say Y here to enable this driver. config BACKLIGHT_MAX8925 tristate "Backlight driver for MAX8925" - depends on BACKLIGHT_CLASS_DEVICE && MFD_MAX8925 + depends on MFD_MAX8925 help If you have a LCD backlight connected to the WLED output of MAX8925 WLED output, say Y here to enable this driver. config BACKLIGHT_MBP_NVIDIA tristate "MacBook Pro Nvidia Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && X86 - default n + depends on X86 help If you have an Apple Macbook Pro with Nvidia graphics hardware say Y to enable a driver for its backlight config BACKLIGHT_TOSA tristate "Sharp SL-6000 Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && I2C - depends on MACH_TOSA && LCD_TOSA - default n + depends on I2C && MACH_TOSA && LCD_TOSA help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its backlight config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && X86 - default n + depends on X86 help If you have a Tabletkiosk Sahara Touch-iT, say y to enable the backlight driver. config BACKLIGHT_WM831X tristate "WM831x PMIC Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X + depends on MFD_WM831X help If you have a backlight driven by the ISINK and DCDC of a WM831x PMIC say y to enable the backlight driver for it. config BACKLIGHT_ADX tristate "Avionic Design Xanthos Backlight Driver" - depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX + depends on ARCH_PXA_ADX default y help Say Y to enable the backlight driver on Avionic Design Xanthos-based @@ -268,7 +274,7 @@ config BACKLIGHT_ADX config BACKLIGHT_ADP5520 tristate "Backlight Driver for ADP5520/ADP5501 using WLED" - depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520 + depends on PMIC_ADP5520 help If you have a LCD backlight connected to the BST/BL_SNK output of ADP5520 or ADP5501, say Y here to enable this driver. @@ -276,9 +282,31 @@ config BACKLIGHT_ADP5520 To compile this driver as a module, choose M here: the module will be called adp5520_bl. +config BACKLIGHT_ADP8860 + tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8860, ADP8861 or + ADP8863 say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8860_bl. + config BACKLIGHT_88PM860X tristate "Backlight Driver for 88PM8606 using WLED" - depends on BACKLIGHT_CLASS_DEVICE && MFD_88PM860X + depends on MFD_88PM860X help Say Y to enable the backlight driver for Marvell 88PM8606. +config BACKLIGHT_PCF50633 + tristate "Backlight driver for NXP PCF50633 MFD" + depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633 + help + If you have a backlight driven by a NXP PCF50633 MFD, say Y here to + enable its driver. + +endif # BACKLIGHT_CLASS_DEVICE + +endif # BACKLIGHT_LCD_SUPPORT |
